Memory usage

Similar Questions

• Memory usage of Firefox flies away and crashes despite Reset etc.

  I use Windows Vista and recently, after he tried to update Java and Adobe plugins for Firefox browser last shot every time I use Firefox any open what really but especially if a video is open the memory usage keeps climbing and does not stop. Firefox crashes almost everytime. I tried the Reset, I tried to turn off and so on several plugins and others, and nothing has changed, but that the memory usage can climb higher and avoid crashing anymore. The fundamental problem of the memory usage crazy not stopped nor slowed down.

  It starts at an average use 200 k to 300 k, which was normal, except if he had run for hours or playback of videos for hours could go up to 800 k. For now, thirty minute walk with no video and four tabs is 1 300, 000 k. I don't know what does. I'll try to uninstall adobe and then use an earlier version but I have done so many things at this point, I'm curious to know who else has this problem. I have not tested the safemode, but despite everything I need a lot of these add-ons to what I use my browser for. I do not understand why the use of memory keeps climbing even when I do nothing. I run a system scan for virus etc, nothing. I know that I have an older video, its pilots updated card and I tried to turn on the option acceleration on and out also. Why Firefox would continue eating memory?

  The crash of the reports I receive look like this:
  BP-7cf4e751-66dB-49fc-8a05-083132130814
  BP-b680d967-eee5-44a7-a5e0-c1f422130814
  BP-5b457653-8B58-4ee0-80cc-32fe82130814
  BP-304b8b40-d4e5-4F36-AF10-de58e2130814

  Thanks to anyone who can help!

  Three of the four crash reports indicate a correlation with the Ghostery extension. The precise cause seems to be indeterminate. Can you make an exception for the video sites and see that allows, or try turning it off for 24 hours?

• Extremely high after upgrade to Firefox 12 memory usage

  After I've upgraded to Firefox 12, I started frequently affected by hot air balloon Firefox memory usage extremely high (2-3 GB after a few minutes of navigation) light. Sometimes it will fall back down to a more reasonable level (a few hundreds of MB), sometimes it crashes (probably trying to garbage collect everything), and sometimes it crashes. Usually the thread crash cannot be determined, but when it's possible, it's in the garbage collection code ( https://crash-stats.mozilla.com/repor.../list?signature=js%3A%3Agc%3A%3AMarkChildren%28JSTracer * %2 js C + % 3A % 3Atypes % 3A % 3ATypeObject * 29% ).

  I managed to capture a subject: report memory when Firefox had about 1.5 GB and have attached an image.

  A couple of things I've tried. I have a lot of tabs open (although don't load it the tabs until the selected option is enabled), so I copied my profile, all kept my extensions enabled, but all my tabs closed. I then left an open page http://news.google.com/ and it worked very well for several days, while my original profile goes down several times a day.

  I also tried to disable most of my extensions, leaving the following extensions that I refuse to sail without:

  Adblock more
  BetterPrivacy
  NoScript
  PasswordMaker
  Views
  Priv3

  However, the problem still happens in this case.

  Don't know if this helps or not. I'm looking forward to trying Firefox 13 when it comes out.

  Never knew what was causing the problem, but have disappeared since the upgrade to Firefox 13, accidents and memory pathological use.

• Firefox uses a huge amount of memory on my computer. I continue to receive alerts from high memory usage. Can I do to solve this problem?

  Firefox uses a huge amount of memory on my computer. I continue to receive alerts from high memory usage. Can I do to solve this problem?

  300-400 MB is not huge.

  How much RAM do you have?
  
  How AVG reports that Firefox uses?

• withdraw the authorization allowing you to monitor the memory usage

  I now often have either force quit, restart and started having panic 'of the core"since I agree allow Firefox CPU usage monitor. I'm still on OS X 10.6.8 on my Mac. I got no problem with anything since installing this OS X.

  However, from time to time with the latest Firefox 7.0.1 installation I think the program or my computer 'blocks' and seems unresponsive. I left active Firefox and resident on my computer last night and once again, everything will be inadmissible. I opened the monitor activity and noticed that Firefox was consuming 283 MB of real memory (now 298,6 MB) and I have this one open another tab for the Seattle Times. I withdraw my permission to allow Firefox to watch my memory usage and need to know how to delete the cookie or what ever that governs)

  Go to Firefox > Preferences > advanced > general tab and uncheck the box "send performance data" more information here.

• Message tells me that the memory usage has been 75%

  Hello

  I get (once a week) a message Bublé Tosh saying my memory usage average during the last 7 days was 75%.
  Should I be worried?

  I have 1014 MB and I don't exactly tell me a power user!

  Thanks for any help.

  Nick

  Don t think that there could be a problem is only a windows Vista notification message that informs you about the State of laptops OS.

• How to check the memory usage of cash L2?

  How can I check if my processor uses cash L2 memory?
  How to activate it?
  How to know how much it is?
  My laptop is satellite MX30-113.

  Hello

  Unfortunately I can't tell you much, but I found an interesting tool for editing memory. He called the Elcor V3.3. If you wish, you can see all the features of the tool. Maybe it will give you more information on the memory usage.

• Y50-70 display blinking rate increases exponentially on 40% memory usage

  I upgraded my new laptop of lenovo Y50-70 to win 10 about 1 month ago. Since that time I noticed that my screen would now and then Flash. I looked for a solution and I had a lenovo... Web site deactivation of 2applications in the Manager of tasks in safe mode. He helped abit because the flicker rate slowed, but it never disappeared.

  I investigated the system of som time now and I have found that when the memory usage goes up to about 40% flickering display rate increases exponentially. I have 8G of RAM, GTX 960 2 GB graphics card so I don't expect a problem when running my usually of programs. I won't even do games even if I know that the machine can handle but I guess it would be much worse if I tried.

  Please give me a permanent solution.

  Note from the admin; type of system added to the subject line

  I can't say for sure, but did you ask al updates to the Lenovo Web site for your system?

  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/Lenovo-y-series-laptops/Y50-70-Noteboo...

  You can download and apply all updates Win 10, including the latest version of the BIOS.

• creeping memory usage when you use NEITHER-9477

  Hi, I write output digital (4 outputs line, on request, 10 updates per second) in a loop using the DAQ assistant. When I use a NOR-9477 as the device output application use memory increases about 10 MB for 15 minutes and will eventually run out of memory.

  If I use a USB6009 as the output device, the memory usage is stable. Same code is used, the only difference is the physical channel.

  Any suggestions as to what might cause this behavior?

  

  Thanks for the tip Ravensfan.

  To distill the code down for the most part, one of the two VI is leaks memory - the NOR-9477 one. The other not...

  In any case, the solution to my problem is to convert the express VI DAQmx code.

• RT in LV 2012 Get memory usage

  Hello

  the VI 'Memory get RT Usage.vi' apparently is no longer available in LabView RT 2012. The help says to go to ni.com/info/f/ and enter a Code Info but this code leads nowhere. My question is now how to replace this VI with a pice LV 2012 in compliance of the code?

  Thanks for the help,

  Christoph

  The memory usage to RT has now been replaced by the function contained in the API of the System Configuration.  You can find the replacement feature in accessing public services RT > System Configuration > software RT > node system.  Drop this node in your code, click on it and go to the system resources.  There you should be able to find all the functions that were previously in the memory usage to RT vi.

• VI memory usage: very large data

  I'm working on the restructuring of an old project using structures that are more up-to-date. The old code used parallel loops to check if the values of the controls have been changed. My new code instead uses the event structures. Glancing on both memory usage statistics, I have reduced slightly before Panel and block diagram object memory, but I have more than 10 MB more 'Data' in the new code. I checked all my paintings and others, none of which is too large. Any ideas on what is using all this memory? Thank you!

  It is using new code from memory.

  

  And it's the former.

  

  Unfortunately, the code is too big to fix.

  How about a control or an indicator that has a large amount of data stored as default?  Who will eat the memory even if the indicator/control displays all these data at the moment.

  Close your VI and reopen it.  See if any of them contain data that you do not wait.  The data can appear even larger because the controls now contains data that is the display as well as the data that is stored by default as one of its properties.

• How to check a Svchost.exe high memory usage and troubleshoot?

  How to check a Svchost.exe high memory usage and troubleshoot

  Beautiful Basu 'ASK ',.

  I think I know the answer. Visit this link

  And you can download SvcHost Viwer here.

  Run the following command from cmd: tasklist/SVC /fi "imagename eq svchost.exe".

  Focus on the PID that is causing the high CPU.

  Run SC Config = own Type for each service under this PID. It will launch each service with a separate svchost.exe.

  I would recommend for a complete AV scan.
  Use the following link for the same thing:
  Microsoft safety scanner

• I get a pop up has a high memory usage when on Internet Explorer.

  MY COMPUTER IS currently RUNNING VERY SLOW WHEN I SURF the INTERNET a POP UP CONSTANTLY APPERARS. TOO HIGH MEMORY USAGE. What CAN I DO TO CURE THIS PROBLEM?

  Original title: pop ups. high memory usage

  try to clean the temporary files, disable unnecessary programs that are running

  in the background and disable add-ons, you don't use

  at the time.

• At startup memory usage fluctuates around 140 MB

  XP Pro Sp3 current on all hotfixes!  'Hidden' processes or services can cause my computer suddenly use about 150 MB additional memory?  As a general rule, when starting up, the memory usage is of +/-285 MB... where it remains for 3 to 5 days.  So, once again, at the start, memory is up to +/-420 MB... where he stays for another 3-5 days, before to return to the use of the bass.  In both scenarios, memory use derivatives up with 30 MB or more during the day due to memory leaks... but this isn't the issue.  And the verification task manager no extra processes are visible.  That is what it is?  I turned off "optimize idle time" for XP... and Ditto fuller analyses of 2012 NAV system.   Any ideas?  Thank you.

  I am not necessarily Pro-Windows, but became generally anti-Symantec/Norton (anti-McAfee).  I understand that some people really like, but if you don't get the compound just right, you may have performance problems.

  Here are a few ways to share screenshots:

  You can download screenshot on your SkyDrive (everyone has a SkyDrive for files sharing) or to a third party image sharing site.

  Start with SkuDrive here:

  http://explore.live.com/SkyDrive-get-started

  Once you get your downloaded files and watch them on your SkyDrive, you need to 'share' your folders/files so that others can see them.

  Here is a link that tells you how to:
  http://explore.live.com/Windows-Live-SkyDrive-change-access-permissions-FAQ

  Then click on the button "insert a link".  When you click on that, a window opens that contains the link to your SkyDrive files.

  Copy the contents of the box "copy this link to share:" in selecting the content of the link (it will be all highlighted), press Ctrl + C (copy) and then come back to the forum and in your next message, press Ctrl + V to paste the contents of the link back here.

  What you paste the return will look something like this link on my SkyDrive:

  https://SkyDrive.live.com/redir.aspx?CID=6a7e789cab1d6f39&RESID=6A7E789CAB1D6F39! 311

  To create and send/post/print capture screen or a screenshot:

  Press the Print Scrn button to copy your entire screen to the Windows Clipboard.

  Press Alt Print Scrn to copy the active window to the Windows Clipboard.

  Open MS Paint:

  Start, programs, accessories, paint

  When the painting opens, press CTRL + V to paste the Clipboard, save the new file in paint on your desktop or somewhere that you remember.  JPG files take up less disk space than BMP files and are just as readable.

  Make screen captures as much as you want.  Practice makes perfect.  Make sure that your screenshot does not contain personal information.  Practice the visualization of your images before you send them to make sure they agree.

  If there is no such function in your forum to download files, then use a third-party free hosting site WWW image.

  Create a free account on some free photo hosting website.  You can always delete
  your account later if you wish.  Here are some free image hosting sites:

  http://www.imageshack.us/
  http://Photobucket.com/

  With your free account, download your screenshot (s) (JPG or BMP files) on the site and it is up to you to a URL (Direct link) for your new images that you can paste the link directly in the post message, e-mail, etc.

  Send this web address link live here in your answer, and we can click on the address of the link and see your screenshot.  After as many times as you need - the sites are free.

  When you are finished, what you post for others to use should look like these screenshots of my poor system:
  http://img820.imageshack.us/img820/8817/taskmanagerk.PNG

  Process Explorer looks like this:

  http://img222.imageshack.us/img222/2567/ProcessExplorer.PNG

• high memory usage

  How to getri of high memory usage

  Memory is used when the programs are 'in progress' (to be run, a program must be copied into memory).  If the (the only way) to remove the high memory usage is to close programs that are not needed.