Menu card Flash FN discovered on the top of the screen on Satellite L510

Similar Questions

• Satellite C660D - flash cards are not displayed on the screen

  Hello
  I bought a Toshiba Satellite C660D a month ago. Everything was fine, until the FN button is no longer displayed the OSD menu.
  I looked on the forums and there were various tips on very similar issues. I downloaded the package of value added once again, I looked in the settings of flash card and nothing does the trick. Could someone help me?

  Any advice would be welcome.

  (ps, job functions, but the screen shows no more).

  What you can do is to call the Toshiba s hotline and ask for help.

  In any case, I think they can tell you the same thing: you can try to reinstall VAP or flash cards utility of support or reinstall OS using HARD drive recovery facility. With the settings, it works well again.

• Flash cards are not visible on the screen when I use the FN key

  When I press the "FN" key is more the meaning of each F1 to F9 keys on the screen.
  I restored my system, the screen was beautiful, but disappeared again.

  Where is the problem?

  > I restored my system, the screen was beautiful, but disappeared again.
  Have you changed anything in the autostart options?

  Please try to restart flash cards using this option in the start menu > all programs > Toshiba > utilities > restart Flash Cards.

  Always the same problem?

• How do you get the menu bar to stop going off the screen all the time?

  2007 IMac 2.4 ghz 4gig ram 1tbt hard drive

  I've updated 'ELCAPITAN' and that I was using the preserved menu bar disappear off the screen that became boring and I couldn't find any way to stop the menu bar to go off the screen, so I went back to snow leopard but have updated for osX 10.9.5

  with no bar menu to disappear.

  The menu bar can be set to hide and show in El Capitan.

  In any OS X that implements the full mode screen, the menu bar is hidden in fullscreen.

  In both cases, move the mouse to the top of the screen will be un-hide the menu bar.

  You can disable the general masking in general system preferences in El Capitan.

  For full screen, you can prevent the concealment using do not full-screen.

• G6 caps lock flashes continuously, nothing on the screen

  Hi, I have a HP g6-1325sa had a problem which had to replace the fan.

  However since then nothing appears on the screen F12 has an orange light and the caps lock continuously flashes every 2-3 seconds. This isn't a blinking code it does this constantly.
  So far, I have tried blocking the vents and leaving the laptop that works for more than an hour, as I've heard can be caused by dry solder joints. I have also tried to replace the motherboard and twice managed to get a cursor blinking on the screen but niether of those moments a normal startup is possible that the HARD drive has been disconnected on both of these occasions, the first time that it happened, I had just disconnected power and battery and power and hold for 30 seconds I'm guessing it's a cmos reset.

  the only cause I can think is that the processor is cooked when the fan has been replaced, but who had already paid for another motherboard I would like someone to confirm what it means when the caps lock flashes constantly and if there is another way to fix it.

  Thank you very much in advance for any help

  Solved this problem where everyone sees the same behavior.

  CPU replaced and he started to ask right now, it seems that my predecessor Cook the processor when they changed it is fan.

• My says Windows Vista update, phase 3/3, do not turn your computer, that hard thing 24 hours, I can't start menu, I can't go down the screen of Windows Vista update

  I have a laptop, ran a software antivirus and then he says to Windows Vista is to install the updates, phase 1 of 3, then 2/3, then he is stuck on the phase 3/3 for 24 hours, if I turn the computer market and unplug it and try to turn back still evokes the same screen. very frustrated.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  And make sure you only set the CD/DVD drive to be 1st in the boot order to boot from the drive that you have just made

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Windows 8 on AMD Radeon graphics card is not completely fill the screen

  Just installed Windows 8 Pro on a Dell Inspiron Zino HD with an AMD Radeon HD 4300 Series.

  Display is a LG on HDMI monitor.

  Installation went well apart from my screen Windows does not fill my entire screen.  I don't think it's something to do with the resolution of the screen, it's just the way that 'image' does not fill the screen correctly.

  Hello

  Did you install these legacy AMD official drivers?
  http://support.AMD.com/us/KbArticles/pages/catalystlegacywin8.aspx
  There is also a setting in the Catalyst Control Center associated with overscan (he has a slider).
  This one should expand your image to fill the edges of the screen.
  Carlos

• Broke the screen on Satellite Pro P100 - 1 1/2 "vertical white line

  Hello
  I have a Satellite Pro P100 which is only 21 months old and have recently acquired a white strip to the bottom of my screen which is located near Center. I looked into the possible solutions for this and followed the instructions carefully to see if it was a software problem which he seems not to be. The only possible solution seems to be to get the screen replaced. I would like to know if there are many of you who have had this same problem because I'm disgusted that I need to get this replaced so early in his life.

  I don't even use my phone as a laptop (IE it transport etc.) it is simply sitting on my desk at home. I just checked my warranty and apparently it was submitted only for 12 months! Just my luck!

  If anyone has any suggestions on how to best to argue my case with Toshiba in get this replaced for free then the answers are welcome.

  See you soon,.
  Corrina

  > Only possible solution seems to be to get the screen replaced

  Either it's a display or the fault of the graphics card!
  You can try to connect the external monitor to test if the same would appear on the second monitor.
  If the question seems not on the external monitor then it s not a graphics card issue but possible display of the laptop problem.
  In this case, the authorized service provider should be able to provide more details and how to fix it.

  Good luck

• Replacing the screen on Satellite C50-A-1CK

  Hello

  The screen of my C50-A-1CK Satellite was recently broke and I need a replacement, but I have no experience with this sort of thing. Editing actually screen won't be a problem (I'm lucky enough to have friends who will fit it free) but I need to buy one and I'm not sure which one to buy.

  I'm looking for something around £40 or less if possible, and I'm in the United Kingdom, if a British salesman would be best. I would prefer to get one on eBay, if possible, so I would really appreciate if I could get a link rather than just "oh looking for it and you will find.

  I thank very you much in advance!

  To be honest, it is not easy to give you some good advice on this. Why? Replacing the screen is rather complicated and almost entire laptop must be disassembled. To do this you need manuals maintenance with explanation step by step how to do this and avoid any damage. This document is not a public document, so I do not know who want to help and how.

  If a person without experience and expertise want to do this, can damage your laptop even more. There are many smallholders plastic that can be broken or damaged.

  I don't know, but in my opinion, you should contact Toshiba service nearest and ask for help. It costs a little, but it will happen on the vocational track.

  Anyway, I don't live in the UK so I don't want to pick you up. You can check ebay UK and search for 15.6 HD 200 CSV LD and if you find a seller contact by phone and check compatibility with your laptop satellite.

• Upgrade the screen on Satellite Pro C50 - A - 1 K 9

  Hello

  I recently bought a Toshiba Satellite Pro C50 - A - 1 K 9 and I am very happy with it. However, I was wondering if there is a way to upgrade the screen for a full HD, one? And if yes, can you point out some retailers to do this, instead of the United Kingdom.

  I did a quick search online, but couldn't see anything. Currently deprived of sleep with my studies, so I'm not myself confidence haha.

  Thanks in advance.

  Fraser

  As much as I know these upgrades are not taken in charge and it is not as for me that Toshiba offers several different screens for each laptop model. In my opinion, you should contact Toshiba service provider in your country and ask if a different view can be used on your machine. They have access to the database of Toshiba and can verify this.

  In general the laptop is as a sort of package of different hardware components. Some of them have the best hardware configuration and cost more than one sort of standard notebooks.

  Until you bought your laptop have you checked specification of the notebook?

• Replacing the screen on Satellite M70

  Hello

  I want to replace my Satellite M70 screen by one from a Satellite L300
  Is this possible? Are only two screen equivalent and interchangeable mechanical and electrical wiring
  and point of vew connections

  concerning

  Hello

  As far as I know both sets of laptop: M70 and L300 supports the same screen size and are equipped with the screen 15.4 "WIDE XGA.

  So from my point of view, it should be possible to use the same screen, but I could be possible that the flat cable that connected the display with the motherboard might be different, so pay attention to this maybe you need another cable

• Question about the size of the screen on Satellite M

  The size of my screen is not expanded by clicking on full size, he won't go to full size, but when I run again she returned to the most small can anyone help what should be a simple problem (ps a new pc user)

  Hi John

  Sorry, but I don't know what you're saying. What you mean with full size and when you click on exactly? You are talking about specific applications or what?

  Please explain exactly what you mean under the size of the screen.

• Replacing the screen for Satellite Pro L10

  The screen is cracked badly on my Satellite Pro L10. About how much can I expect to pay for a replacement within the United Kingdom. Is this something that I can wait to replace me with a screwdiver and some care?

  How much would a complete hull and the screen?

  Where can get me a - Toshiba service center my best bet?

  Hello

  The fact is that the screen of the laptop is one of the most expensive neighborhoods that are installed on the laptop.
  But unfortunately, I do not know what will cost repletion.
  This information you won't get form the Toshiba service partner in your country.
  I recommend you ask the service partner.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true

• Unable to save the changes in the resolution of the screen on Satellite P20

  Recently, I have problems with the resolution/quality of images on my laptop P20.

  When I try to remedy this in the tab settings of Options Diplay it me does not save the changes to the screen resolution or image quality. I am currently using the default monitor on NVIDIA GeFOrce FX Go5200.

  Any ideas?

  Hello

  For all the ideas give us more information please. I just know that the resolution of the standard screen for this laptop is 1440 x 900 and if the right display driver is pre-installed to avoid any problems.

  I used Satellite P20-303 (nVIDIA GeForce FX Go5600) nearly two years with the original display driver and have never had any similar problems.

• How to adjust the brightness of the screen on Satellite Pro A40

  Hello everyone
  Im am an old aged pensioner and I have just started with a needle of the second Pro A40.

  The problem I have is the screen is very bright and I would come down the brightness, can someone help me please.

  Thank you Ken

  Hello

  It's very simple.
  Computers laptop Toshiba supports a FN functions.

  If you want to adjust the brightness to a lower or higher level press simply FN + F6 or FN + F7 and the brightness of the screen will change ;)

  Check :D