How to adjust the brightness of the screen on Satellite Pro A40

Similar Questions

• With W - Xp how to adjust the screen size to fit my small computer 10 inch?

  The screen is larger than the size of the computer.  How can I make or reduce the screen 10 "?

  Hi jamessweeney,

  You can try to lower the resolution of the screen and check if it helps.

  For more information, see these links: to change your screen resolution

  Change the resolution of your monitor

  Hope the helps of information.

  Please post back and we do know.

• How can I fix the screen on Satellite Pro L300?

  How can I fix my screen Satellite Pro L300? I went by mistake about it.
  Although there seems to be nothing wrong with the external armor but there seems to be a few lines on the screen.

  The glass is cracked? You see the flow of liquid crystals when you move the screen?

  If the lines are perfectly horizontal or vertical, and then the glass behind the protective plastic surface is cracked, requiring a replacement LCD.

  An authorized service provider can give you a new LCD Module. Visit the Web from Toshiba for a list of the ASP

• Replacing the screen for Satellite Pro L10

  The screen is cracked badly on my Satellite Pro L10. About how much can I expect to pay for a replacement within the United Kingdom. Is this something that I can wait to replace me with a screwdiver and some care?

  How much would a complete hull and the screen?

  Where can get me a - Toshiba service center my best bet?

  Hello

  The fact is that the screen of the laptop is one of the most expensive neighborhoods that are installed on the laptop.
  But unfortunately, I do not know what will cost repletion.
  This information you won't get form the Toshiba service partner in your country.
  I recommend you ask the service partner.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true

• Broke the screen on Satellite Pro P100 - 1 1/2 "vertical white line

  Hello
  I have a Satellite Pro P100 which is only 21 months old and have recently acquired a white strip to the bottom of my screen which is located near Center. I looked into the possible solutions for this and followed the instructions carefully to see if it was a software problem which he seems not to be. The only possible solution seems to be to get the screen replaced. I would like to know if there are many of you who have had this same problem because I'm disgusted that I need to get this replaced so early in his life.

  I don't even use my phone as a laptop (IE it transport etc.) it is simply sitting on my desk at home. I just checked my warranty and apparently it was submitted only for 12 months! Just my luck!

  If anyone has any suggestions on how to best to argue my case with Toshiba in get this replaced for free then the answers are welcome.

  See you soon,.
  Corrina

  > Only possible solution seems to be to get the screen replaced

  Either it's a display or the fault of the graphics card!
  You can try to connect the external monitor to test if the same would appear on the second monitor.
  If the question seems not on the external monitor then it s not a graphics card issue but possible display of the laptop problem.
  In this case, the authorized service provider should be able to provide more details and how to fix it.

  Good luck

• Question about volume adjust the volume knob - Satellite Pro U300

  Hello

  I have a problem with the volume control. When I adjust the volume using the button on the left side of the laptop, I can only choose 3 levels of "loudness":

  No volume, very quiet volume and maximum volume (from rabies).

  Is this normal, is not anyone have problems with this?
  I hope that the problem is because of the digital volume adjustment screw. The adjuster does not record the exact position of the volume button. Every time when I get a phone call at work (I listen to internet radio), I turn off the radio by using the adjustment screw on the side of the laptop. When I end the phone call, I always need to open the laptop and the volume on the windows task bar, because when I use the device volume control on the left side of the laptop, it will just immediately at maximum volume.

  Welcome them

  Hello

  It s very strange that your volume control contains only 3 levels of volume
  I noticed that Toshiba has released a new driver (v. 6.0.1.5473) sound on the European driver page.

  How about if the update driver sound?
  Audio driver certainly controls the volume sound and in my opinion it s worth a try.

  Good luck

• How to activate the Microphone on Satellite Pro A120 entry?

  Hello

  I have a SAT PRO A120, when I connect a microphone he pictures it upward, but there is no sound, how can I reactivate or activate it, iv looked in the windows and control his Toshiba volume controller, but not luck
  Thank you very much

  Robert Dawson

  Hello
  If you go to controlled Panel-> Audio devices there should be a setting and therefore the volume of the microphone, as well as opening the volume icon in the lower right hand tray and selecting advanced settings and clicking on the checkbox for microphone, so you can adjust the volume of entry etc. Let me know if it helps.

• How to wear the Vista/Toshiba Satellite Pro A200 software after upgrade HARD drive

  Hello.

  Have ordered a Seagate Momentus 7200.02 200 GB SATA-300 7200 RPM 16 MB 2.5 "for my Satellite Pro A200GE - 26. Toshiba slow disk with this laptop ships is simply not fast enough so it is replaced.

  My question is this: can I use the recovery disc of the DVD came with my laptop to reinstall Vista and all the Toshiba drivers on this new album?

  If this is not the case-how can I do?

  If I can do it - could you give me a checklist of things to do?
  Are several factors I need to get used to exist on the recovery disk?

  I ask this because I know how to do this on a PC with the Original OS disc, but I was horrified when my laptop has been delivered and no original OS disk - I think it's very bad for any help would be accepted with gratitude.

  Thank you in advance,

  Kenny.

  Hello

  You should not worry about the whole procedure, just install the HARD drive, put the recovery CD in your CD/DVD drive, press F12 and start with your CD drive or just press 'C' (which automatically inserted CD, boots).

  The recovery is not limited to a specific HARD disk, it automatically adjusts the size of the partition and install EVERTHING on your disk as a preinstalled OS shipped directly from the factory. Don t you need some additional drivers or software, the only thing you need to do is to copy your personal data on the system drive and customize your windows.

  It is the intention of recovery media: put it in and it does everything by itself.

  That's all. :)

  See you soon

• How to change the color of Satellite Pro P300 settings

  I just received my new laptop computer and cannot for the life of me find how to change the color settings in the monitor.
  My old desk there was a button on the monitor.

  In a first time laptop user im nuts will try to find how to change my monitor settings...

  If anyone can help id be so grateful

  Please don t mix the portable computers internal monitor with external PC monitor.
  You won't find any control unit and on the external monitor that would help you to change the color.

  I put t know what your laptop smart chart uses but my laptop supports Intel graphics card and pre-installed (in Control Panel) Intel Graphics Media Accelerator provides a few color correction settings.
  The parameters are; color, gamma, brightness and contrast

  Here, you can set values between 0 and 100

  Maybe it's what you're looking for

• Upgrade the screen on Satellite Pro C50 - A - 1 K 9

  Hello

  I recently bought a Toshiba Satellite Pro C50 - A - 1 K 9 and I am very happy with it. However, I was wondering if there is a way to upgrade the screen for a full HD, one? And if yes, can you point out some retailers to do this, instead of the United Kingdom.

  I did a quick search online, but couldn't see anything. Currently deprived of sleep with my studies, so I'm not myself confidence haha.

  Thanks in advance.

  Fraser

  As much as I know these upgrades are not taken in charge and it is not as for me that Toshiba offers several different screens for each laptop model. In my opinion, you should contact Toshiba service provider in your country and ask if a different view can be used on your machine. They have access to the database of Toshiba and can verify this.

  In general the laptop is as a sort of package of different hardware components. Some of them have the best hardware configuration and cost more than one sort of standard notebooks.

  Until you bought your laptop have you checked specification of the notebook?

• Re: How to disable the BIOS on Satellite Pro A300 - 1 2 pass?

  I have a Toshiba Satellite Pro A300 - 1 2, some how the BIOS got locked and a startup password has been enabled, I tried to get in the BIOS to disable the startup password but without any job.

  What I need to send or take it back to Toshiba to take them off for me?

  Thank you for your time.

  If the BIOS password does not work for you, you need professional help. Contact the nearest Toshiba service and they can remove it for you.

• Re: How to access the BIOS on Satellite Pro A120

  Can someone tell me how to access the BIOS on my SAT Pro A120?

  Hello

  You must press ESC and then F1 key immediately after the laptop has been powered!

  The laptop seems to be to use the Toshiba BIOS and ESC key should be the right one!

  Good bye

• How to set the power settings - Satellite Pro A10 with Win XP Pro

  I an A10 Pro of the Satellite with Win XP Pro installed and cannot access the power settings. When I go into the power settings in Windows, I get a msg telling me to use Toshiba Power Saver and Win power settings are grayed out.
  I installed pwrsav-spa10-xp-60007-.zip which tells me that it is installing the Toshiba Power Saver, but always Win power settings are greyed out and I can't find no separate application "Toshiba Power Saver".
  The BIOS shows ' version of BIOS ACPI = 1.30.
  Can someone advice how to change the power settings please?
  Thnx.

  Dave

  Hi Dave,.

  You have the "Toshiba common Modules" installed? They must first of all for many models of Toshiba, and power settings module is an add-on for that.

  If you do not have the appropriate restoration or the utility CD handy, the drivers can be downloaded from the Web from Toshiba website.

  I hope this helps, let us know how you go

  Weezle

• How to access the BIOS on Satellite Pro 4600 settings?

  Guys,

  I received a Satellite Pro 4600, unfortunately this laptop has 2 and a half proceeding on this issue. The first is MS2000, then XP then an incomplete installation of XP. When I start the laptop, it asks which OS I want to use. I have a legal copy of XP that I bought and I want to reformat the computer laptop and put on a new install of XP, the problem is how to enter the BIOS to change the settings to boot to a CD?

  Any help is greatly appreciated.

  Steve

  Hello

  First of all you n t need to access the BIOS to boot from the CD.
  You can simply press the F12 key immediately after the laptop has been powered.
  It would show the available boot options.

  Alternatively, you can press the C button that would automatically allow the CD/DVD drive as the boot source.

• How to clean the cooling on Satellite Pro 6100 module?

  Since my laptop for some reason stop (explained in my last post), I read messages from others who are similar to my problem and some of the responses that they was that they must clean the cooling with a vacuum (vacuum) module.

  So I was wondering how to clean it and where is it? (I m not an expert on computers)

  Hello
  I am not owner of a Satellite Pro 6100 but I saw this laptop on several pictures and it seems that the fans are placed at the rear near the CC.
  If you try to vacuum dust and debris from these grids of fans.

  I found also found a very detailed instruction how to remove and open the Satellite Pro 6100. http://www.irisvista.com/tech/laptops/Toshiba6100/Toshiba_Satellite_Pro6100_dismantle_1.htm

  BUT if you have no experience, you must do it yourself. The best way to ask someone who knows what to do!