Menu widget problem, after obtaining the last menutab you cannot back

Similar Questions

• My touch screen has a problem after downloading the IOS 9.0.2. Already try apple advises the steps. But the problem still occur. Already done restart of strength. Factory setting Reset also possible. But still the same problem. Can only be used at one min

  Hello!!!

  IM Apple Fan.

  Purchased IM Ipad2, Ipad4, Iphone6

  Last month I already buy s Iphone6 +.

  Today I feel unhappy

  MY IPHONE 6 'history '.

  My touch screen has a problem after downloading the IOS 9.0.2.

  Already called and try apple advises the steps. But the problem still occur.

  Already done restart of strength. Factory setting Reset also possible. But still the same problem.

  Only can be used for a minute. After that... The problem comes in again & again & again...

  APPLE.COM

  Can U help me

  Only products of Apple of love before updating the version 9.0.2

  iOS 9.0.2 happened some time. The last iOS is iOS 9.2. If you have not updated, updated. If you restored to the factory, it must have downloaded iOS 9.2. Also, if you restore to the factory and the problem is still there, then you must make an appointment at the Genius Bar to the nearest Apple store or Apple authorized service provider or call the Apple Support to have the device examined by Apple. There seems to be something wrong with the screen.

• After installing the last "Update Agent" I can always get updates for Windows 7 Home Premium?

  After installing the last "Update Agent" can't always updated for

  Windows 7 Home Premium?  After 2 days in dealing with this problem, I came to help?

  Someone please give me an answer!

  E-mail address is removed from the privacy *.

  Hello

  Please contact the Microsoft community.

  As you said that you are not able to get new updates of windows on the computer.

  I would like to ask some questions about your request:

  1. When was the last time that you install the windows desktop update?

  2. You receive an error message from the updates?

  3. You use any third-party antivirus on the computer?

  4. Did you do any change on your computer before the show?

  Please refer to the reference to the link below for " " " The problems with installing updates".

  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7

  Please get back to us with the information in short so that we can help you further.

• After that the last update 12.3.3.17 itunes will not recognize my devices on windows 10

  After that the last update 12.3.3.17 itunes will not recognize my devices on windows 10

  Have you tried these steps? If iTunes does not your iPad, iPhone or iPod - Apple Support

• Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... recovery tests without success... Help, please...

  Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... try to recovery without success, a loop back and asking to recover or normal boot...  Attached to jumps, safe to ask if I want to recover...  I never received an OEM of VISTA version, but the first time having problem after all these years...   Help, please...  Would contribute to a boot disk, if so, how can I get a copy?...  Thanks, Dave * address email is removed from the privacy *

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And here's how to use Recovery of Acer.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  See you soon.

• When was the last time you submitted an application?

  When was the last time you submitted an application? And when it has been approved?

  Hi all

  We are working as quickly as possible to get through the large amount of applications and news submitted by sellers who's original version was not signed or other problems.  We apologize for any delay being considered.

  Given the little information available in this section and will be another of GoldenJoe, I think I could find the status of most of your applications and either approve them or warn you of problems based on our tests.

  If I missed anything, please let me know.  I'll try to prioritize the best I can before the launch.

  Please don't me message on applications submitted a few days ago only - we focus now on applications submitted prior to April 1, or shortly after.

  Thanks again for your patience,

• The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

  The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

  
  

  Hi Marcelo,

  You may need to check this: Re: Premiere Pro 2015 won't open after the recent update

  Kind regards

  Navdeep Pandey

• Impossible to access the account, the message says: "you cannot access your account because your parent has blocked it.»

  Changed the title: I opened an account and set up parental controls. It is impossible to access that account the message said "you cannot access your account because your parent has blocked it."

  I opened an account and set up parental controls. It is impossible to access that account the message said "you cannot access your account because your parent has blocked it."

  Hello Nimaakhaven,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

   

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• ProBook 6470b: problems after format the laptop and load the W7

  Hi all

  Here are my problems:

  After 2 years using the laptop, I decided to format it and reboot with the disk W7 of professional origin.

  At the same time, I exchanged the original SATA HDD with a new SSD in Kingston.

  After you have installed all the drivers, it seems to work very well and much more quickly, but has two problems:

  1 - the automatic update of Windows does not work. Only is looking for available updates, but it ends, even > 24 h research.

  2. before reinstalling, my battery lasts for 5 hours. Now only 2 to 2.5 hours.

  Does anyone have any ideas on how to solve my problems?

  Thanks in advance.

  Ernest

  Good, glad it worked

  Have you had any success with the BIOS settings? Contact HP support directly for this may be a good idea here.

  Captain_WD.

• LR unexpectedly several times after leaving the last update

  After I downloaded the last update of Lightroom CC, a couple of days, whenever I open Lr to work, it would be stay on only for a few minutes and close unexpectedly. What should I do now? Many reports of errors have been sent to Adobe, but so far no reply yet.

  Hi F5Duke,

  If this is the last update CC2015.2/6.2, suggest you to turn off the "Show Add Photos screen" option in Lightroom preferences > General

  Relaunch Lightroom and check if the problem persists.

  Kind regards

  Claes

• My new Menu button that came with the last update is now gone.

  I removed the button because it bothers me thinking it would have no impact, but now I can't, because it contained the customization menu. I searched through the other options in the menu, but the only path to the customization is now hidden in the button now gone.

  Do you use the extension classic restaurateur theme?

  • You can check the settings of the extension of the CTR through the Options/preferences button on the page "Firefox/tools > Modules > Extensions.
  • You can find additional toolbar buttons and additional toolbar settings in customize (Firefox 3-bar menu button > customize)

  See also:

  • https://support.Mozilla.org/KB/how-to-make-new-Firefox-look-like-old-Firefox
  • https://support.Mozilla.org/KB/common-questions-after-updating-to-new-Firefox
  • https://support.Mozilla.org/KB/learn-more-about-the-design-of-new-Firefox

  In current Firefox released (29 and following), which are have a UI Australis, the orange Firefox menu button has been replaced by the three button bar of Menu of Firefox at the far right of the Navigation bar and this button is always visible, if you have the bar of menus visible or hidden
  A consequence of this situation, it is that you can no longer hide the Navigation toolbar

  • There is a star as the button next to the search bar on the Navigation toolbar to bookmark the current web page and a "Show bookmarks" button next to it to open bookmarks in a menu drop-down.
    You can find "Show all bookmarks" to open the bookmarks (library) at the bottom of the drop-down list manager
  • If bookmark you a page, then 'Bookmark this Page' in the bookmarks menu replaces it with "edit this bookmark".
  • You can make the bar visible title via the "Title bar" button at the bottom left in the palette to customize window

  It is still possible to have the bar of menus visible via the menu popup of a toolbar for menus as the file menu to print (Ctrl + P) and preview before printing and the bookmarks menu available.

• Satellite L50D - Boot problems after replacing the hard drive

  I just upgraded my hard drive of the pathetic crod 5400 they provide to a SSHD@7200rpm, but now have a major issue.

  I initially image the operating system from the old hard drive to the new drive and have had chronic start-up problems (1-3-4 attempts to start to succeed if it fails at any time (often to the Toshiba start screen)).

  I reinstalled from a drive under Win 8.1 plain own ENT (trying to avoid the bloatware) and it is exactly the same number and is what I used to format the laptop very well with previously and had previously worked.

  I tried reformatting and reinstalling (by removing all partitions on each attempt) to the CSM, unsafe UEFI and UEFI secure. MCS is a straight line never works not proceed and both UEFI methods have the same exact result.

  I tried with original restore disks and it seems to work (not had time to fully test) but I don't want the bloatware and it shouldn't be serious since, if I were a customer who forgot to make restore disks (too often) and just have to have a failed hard drive or replaced sacrificed the laptop would be now a door stop.

  This seems as bad as Apple to lock people in.

  So I would appreciate ideas of people to please, I don't know if there is a program that is supposed to take place on a new drive as PS3 etc (I doubt it), but that leads me into the wall, and will be the last time that I consider Toshiba as anything other than a joke, if there is no solution.

  I had to replace the hard disks many times in my previous Toshiba laptops and were devoid of this crod, it has something to do with UEFI which seems more a nuisance than a help right now.

  TIA.

  Hello

  In my opinion, you should first check if the startup problem is related to the new installed HARD drive or new installed system.
  You said that the laptop fails to start up often to the Toshiba start screen.

  The splash screen appears during the POST (power on self-test) procedure. During this test, the material will be checked.
  I m wondering if the hybrid SSD/HDD isn't recognised by the BIOS during this particular step.

  From my point of few, this could be the reason why the system cannot be started.

  Another important note:
  The 8.1 win requires enable start secure as well as the UEFI boot mode.
  Therefore, you must enable both options in the BIOS.

  Last but not least check if you are using the latest BIOS version as latest firmware for the hybrid SSD/HDD

• Problems after updating the BIOS on Satellite Pro P200

  I recently buy a Satellite Pro P200 running Windows Vista Business. Yesterday, I updated the BIOS to the version 1.50 supplied with the machine to 1.80 available on the Toshiba site. I double checked that I was using BIOS correct update for the Pro P200 Satellitel running Vista.

  After updating the BIOS, I have now two problems:

  1. whenever I start and join the office, I get an error message "record of Vista has stopped working". This problem has been identified as toshibavistaregistration.exe here: [link: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99805]

  2 Control Panel > system now shows the processor and the memory (RAM) as "not available". Execution of the diagnostic PC Toshoba tool and looking at basic information show also no information on the memory (RAM) Although the processor information here. There may be pieces others missing too under the eyes of list shorter than before the update of the BIOS.

  Basically, I want to get everything working again as it should, but cannot find any information on these issues.

  After further review, it appears that the update of the BIOS is not the cause of the problems.

  Immediately after updating the BIOS, I had a major system crash. It turns out that this is what has caused problems.

  After a system restore to a point before the update of the BIOS and the major system crash, now everything is working again with BIOS version 1.8 in place.

• Satellite P200-1EE: charger problem after replacing the AC adapter / CC

  After changing my AC power (the old one didn't work anymore) I have problems with the battery charging circuit.
  When the adapter is plugged in and the laptop is turned off, it charges the battery OK.

  If I turn it on it will charge the battery until it is fully charged, the light will be then turns blue for a few seconds and then turns off.
  The battery will then race down until it is completely empty, even if the power adapter is showing as connected.
  Once the battery is fully discharged cell breaks down. Once off, it will start to load again.

  Someone at - it ideas to help me please.

  Hello!

  A friend of mine had a similar problem with its Satellite laptop. He bought a not Toshiba AC adapter and the battery could not be loaded.
  After that, he bought an adapter AC from Toshiba and everything works now.

  On the Toshiba site, you can search for compatible adapters:
  http://EU.computers.Toshiba-Europe.com-online services & -online Options of PC Accessories devices & -Online Homepage Options & accessories PC

  Good bye

• iTunes does not stop after playing the last song on the playlist

  It was that iTunes has stopped playing after the last song in a playlist.

  I really liked it.

  Now, he travels the playlist, starting with the first song, after the last song is played.

  How can I disable this sort of iTunes for the iPhone goes back to stop playing after the last song?

  I can't see any preferences panel.

  You must disable the repetition. The only place to do it is on the "Now Playing" screen (view great work of the song).  Downstairs there are two arrows of recirculation, tap those until their origin is so more gray... he alternates song to repeat, repeat list, OFF.  Certainly, it is a horrible UI decision...