Satellite P200-1EE: charger problem after replacing the AC adapter / CC

Similar Questions

• Satellite P200-1EE PSPB6E: problem of battery and Webcam

  Hiya People,

  New on the Toshiba Forums here and stuck on a problem I have with this laptop.
  I have a Satellite P200-1EE model number: PSPB6E 0GM028EN. The election House of Uni a few days ago my refuses to laptop to turn on the laptop on and happening only when I put a Power cable in.

  I took out the battery cleaned with a can of Air and put it again and it worked but the next time I did nothing happened.
  Strange thing is that, once it is running, and I take the power wire, it works fine.

  2nd problem is the software integrated Webcam won't work for me. Sometimes, and when I restarted the laptop it works fine again.
  I tried to reinstall the driver but it gives warning that the newest is already installed on my laptop.
  Am I right in thinking that its due to the new version?

  Any help or Suggestions are appreciated and thanks in advance

  Seamus

  > Laptop on and lights up only when I put a power cable. I took out the battery cleaned with a can of Air and put it again and it worked but the next time I did nothing happened. Strange thing is that, once it is running, and I take the power wire, it works fine.

  It is maybe something wrong with the battery of laptops of s?
  How old is your laptop? Guarantee is valid?

  As far as I know, the guarantee covers the battery for one year. Then maybe you should ask and ASP in your country for a control? Maybe the battery doesn't work as it should.

  > 2nd problem is the software integrated Webcam won't work for me. Sometimes, and when I restarted the laptop it works fine again. I tried to reinstall the driver but it gives warning that the newest is already installed on my laptop. Am I right in thinking that its due to the new version?

  I n t have a solution to deliver you but I assume that it s associated with the software/driver of webcam.
  You should visit the European driver Toshiba page from time to time and need to check if an update is available.

  Good luck

• Satellite P200-1EE does not properly of the HD-DVD play

  Hello

  My Satellite P200 - 1EE laptop doesn t play DVD s correctly when the DVD loads up it plays but stops and starts as a 'jump' CD and the dubbing is very bad.
  So, I tried the setting on my DVD player program but made no difference at all

  I think HD-DVD player is broken.
  Can someone help?

  Hello

  I guess you are trying to read HD DVD using the HD DVD from Toshiba player.
  Am I wrong?

  So first of all, you should try to update your HD Toshiba DVD player software.
  Then, check if the HD-DVD player firmware update is possible.

  The two parties, you should find on the European driver Toshiba page!

  I noticed that Toshiba updated own HD-DVD player software and that has solved several problems about the HD-DVD playback.

  Good luck & best regards

• Satellite L50D - Boot problems after replacing the hard drive

  I just upgraded my hard drive of the pathetic crod 5400 they provide to a SSHD@7200rpm, but now have a major issue.

  I initially image the operating system from the old hard drive to the new drive and have had chronic start-up problems (1-3-4 attempts to start to succeed if it fails at any time (often to the Toshiba start screen)).

  I reinstalled from a drive under Win 8.1 plain own ENT (trying to avoid the bloatware) and it is exactly the same number and is what I used to format the laptop very well with previously and had previously worked.

  I tried reformatting and reinstalling (by removing all partitions on each attempt) to the CSM, unsafe UEFI and UEFI secure. MCS is a straight line never works not proceed and both UEFI methods have the same exact result.

  I tried with original restore disks and it seems to work (not had time to fully test) but I don't want the bloatware and it shouldn't be serious since, if I were a customer who forgot to make restore disks (too often) and just have to have a failed hard drive or replaced sacrificed the laptop would be now a door stop.

  This seems as bad as Apple to lock people in.

  So I would appreciate ideas of people to please, I don't know if there is a program that is supposed to take place on a new drive as PS3 etc (I doubt it), but that leads me into the wall, and will be the last time that I consider Toshiba as anything other than a joke, if there is no solution.

  I had to replace the hard disks many times in my previous Toshiba laptops and were devoid of this crod, it has something to do with UEFI which seems more a nuisance than a help right now.

  TIA.

  Hello

  In my opinion, you should first check if the startup problem is related to the new installed HARD drive or new installed system.
  You said that the laptop fails to start up often to the Toshiba start screen.

  The splash screen appears during the POST (power on self-test) procedure. During this test, the material will be checked.
  I m wondering if the hybrid SSD/HDD isn't recognised by the BIOS during this particular step.

  From my point of few, this could be the reason why the system cannot be started.

  Another important note:
  The 8.1 win requires enable start secure as well as the UEFI boot mode.
  Therefore, you must enable both options in the BIOS.

  Last but not least check if you are using the latest BIOS version as latest firmware for the hybrid SSD/HDD

• Satellite L500 is not start after replacing the CPU fan

  Hi guys, I just replaced my cpu fan because the former was noisy and only working at half speed, I also had a couple of farm of downs due to overheating. The day that I removed the old fan the laptop was working fine and I stopped via the Start button and disconnected power and all the other wires.

  I installed the new fan today, put everything, plugged in the power cable, power led ok, ok... hold the power button led charge, led came to start on, turning on the fan, no hard drive does not display goes out again in 20 seconds, only power led and led load display.

  Unplugged all, disasembled and checked all my connections were ok, tried, always the same problem, checked the fleas memory sharp and even cleaned for hard drive always the same problem...
  Anyone out there who can help me please...?

  Best regards, Hans

  Did you remove the CPU or have you checked if its places correctly?
  Have you added the cooling grease after removing the cooling module?
  Hmm, but it looks like a little you damaged the Council why disassemble unit.

• Pavilion dv6 2170 clock problem after replacing the CMOS battery

  Hello world. Sorry for my bad likely English

  OK, so the problem started since I changed my laptop CMOS battery. and to be honest it wasn't whit any problem the clock when I replaced it but I if this may be the cause of another problem that later I figuered what the problem was because of the RAM.

  in any case, I changed the Rams and this problem has been resolved. I just set the clock of the BIOS and rebooted the system. After awhile I figuered that windows clock is not fair. I restarted again and saw the BIOS clock. It has been reset for 2009! even when the laptop battery and power supply are attached the BIOS and windows continues to change clock! I even changed my windows and I replaced the CMOS battery with the former, but nothing helped. It seems really strange, but I don't think it's maybe a hardware problem there a driver or something for the CMOS battery... need your help! Thank you!

  You mentioned that the BIOS has been reset for 2009? This means that there is a problem with the current or any leak and the BIOS has been "reset" back at the root of the plant. I'm afraid you have shorted something when you changed the battery not be grounded.

  Worst case is that there is physical damage to your motherboard and there is nothing you can do about it, probably broken a capacitor - who cannot hold a charge to prevent the reset of the BIOS clock.

  However, you can try this.

  Completely, unplug your computer, remove the laptop battery, etc... Then browse 'Guide' your computer for the "hard physical reset" for your CMOS. I don't know what it's like on a laptop, I only did it on desktop with riders. Be sure to follow the directions precisely.

  -Make sure you are properly grounded. touch the metal parts that is grouned before touching anything on your computer.
  -the hard reset should be done for at least 30 seconds, this ensures that the power is completely served the system. Then you can set this back.

  Try this a couple of times, first without removing the CMOS battery and 2nd time after remove CMOS battery and placing it in.

  Good luck.

  BTW, you can also try running without your new memories (if there is more than 1 stick, try them separately). In fact, I would probably try first before doing a hard reset CMOS. The reason why I didn't say earlier, it's because I have assumed that you already tried this.

• Satellite P200 - option SATA missing after upgrading the BIOS

  Hey guys!
  First sorry for my englich
  So I have a toshiba satellite p200 1jy upgrade the version of the bios (Phoenix bios) 2.70, but when I update upward I don't have the option of ahci sata or ide mode, I do not have this option, but I had before upgrade,
  so please what can I do to switch to ahci or ide mode, can I downgrade the bios version

  So thank you we

  Hello

  Must add driver SATA while installing Windows.
  During the installation process you will be asked to add the driver (F6 key)
  Then you could add the connected USB floppy disk driver.

  More details how to do here:
  http://APS2.toshiba-tro.de/KB0/TSB7B020R0000R01.htm

  or here

  [How to integrate the AHCI driver when installing Windows XP | http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm]

• Problems after replacing the cartridge

  Hello

  I have a problem with my all-in-one HP Photosmart C3180. Recently, I replaced the black cartridge with a new one and now I can't print or copy more because it shows a problem with the cartridge three colors (it has not been replaced).

  What happens is that the red error led and the led (the one near the color copy button) color cartridge still flashing. It does not accept any input print and everytime I turn on the printer it will begin what is called "align cartridge" (printing paper with a few lines on this subject).

  Is that what I can do in addition to the replacement of the two cartridges at the same time? I never had this problem before.

  Thank you for your time,

  Alin.

  Hello, AXN

  Unfortunately, you must have the color cartridge to print. I noticed that some printers can still use the scanner if you also need that. You can always try, but it might give an error when you try to print.

  Let me know if the replacement cartridge solves your problem.

• Problems after replacing the motherboard

  I had my motherborad replace and drive hard and now still wmi repeated problems startup problems and disk problems
  now computer freezes up on me I think I will close it
   
  Please you delte this message because you seem to move my posts elsewhere anyway, and have not responded to me
   
  Pleae respond as soon as possible I think THAT MY COMPUTER IS GOING to BLOW UP
  ERROR 8004005 0XC00000D 0X000000 0 X 79
  REPEATED WMI ERRORS AND OTHER MISTAKES TO THE COUNTY PLEASE WRITE ME AS SOON AS POSSIBLE
   
  I could not download the file, I hit copy and got many files, but it wouldn't let me download the file do - what I do?
  now, o took two blue screens and several error what should I do. error fatal 0xfffbf8 error ox0000020 essent and 24 and error 0 x 79
  I had shut downs and crashing and placing of time then going on.?

  Hello

  "I had my motherborad replace and drive hard and now still wmi repeated problems startup problems, and disc problems.

   

  You don't say who 'fixed' to your computer.

  If it was Dell, which is in contact with you soon, get them to repair it properly, or if it was someone else that Dell, take it back to the person who has replaced the motherboard and hard drive and get them to repair it properly.,.

  See you soon.

• Officejet 4315 slow printing problems after replacing the print cartridge

  my printer was working fine until I replaced my print cartridges. I replaced the black with color with 22 and 21.

  my test page prints fine and sometimes my impression is very good. but often, my impression is extremely slow. can't understand why it is slow sometimes and other times it is nice. do not have this problem until I replaced my print cartridges.

  I found a post on slow printing and I tried the different steps. don't know what the issue is. Thank you

  Real new ink installed HP?

  You could remove the cartridges, reset the printer and turn on without the cartridges, and then reinstall the cartridges. Eliminate any power surge strips or extensions, plug the unit directly into a wall outlet.

  When you mention slow, how to slow down? How long to print from the computer exactly? How long for a print job initiated from the printer exactly?

• Satellite P200-1EE - how to connect to the device using Belkin Mini Bluetooth Adapter

  Please can someone help with my problem.

  I am running Vista sp2 and just bought one of these adapters.
  Tried to load the software and I'm having problems.

  This icon appears in the system tray, but no icon on the desktop.

  Now I have 3 other computers running XP and have installed the software without problem.

  Belkin has called this afternoon and they recommended their virtual software but this has not solved the problem.
  Tried the Broadcom website and download their latest software but still no joy.

  Without the software, I can't pair devices to the computer, but I can print for my C5380.

  Someone had a similar problem?
  What is annoying is that they use a Toshiba laptop like the screenshot in the installation guide.

  Help!

  OK, I worked in a solution.

  The software cd has a file for windows like vista

  The windows folder installs an earlier version of the software, but it works with vista.

  The vista software does not.

• Satellite C660 - WIFI connection lost after disconnecting the AC adapter / CC

  I have a Toshiba Satellite C660/C660D.

  I always connect to the Internet via the wireless connection. However, the laptop must be connected to the power supply. As soon as I unplug the connection drops.

  Any help / advice would be much appeciated.

  Hey Buddy,

  Please read this article. Normally it should help you:
  [Wireless LAN connection disconnects when the AC adapter is removed. | http://APS2.Toshiba-tro.de/KB0/TSB12033H0001R01.htm]

• DV8T 1100 CTO graphic problems after replacing the motherboard

  Windows 7 Pro. Built 3 years ago this month. Motherboard is dead because of damage of water, but not before I could test the CPU and RAM, which has survived intact. Bought a NEW replacement MB of HP parts store. Put it in. It was obvious that the machine was to start the system, but no video. I put on an external monitor. Video about it. Looked at this forum and based on suggestions from the experts on what causes black LCD screens, has decided to buy a strainer as it could have been a cable on the whole of the sieve or video converter problem continuous alternative back light works fine, but I wanted the fixed machine and doing the problems of individual components on the screen. Assembly of the new screen does not work. Windows found the webcam and audio on the new screen (already present with the old screen), but all to change the resolution and rotation is grayed out with a screen.

  No light flashes at startup. The new motherboard BIOS is updated. I did not burn in tests.

  I do not have a second MB work through the ordeal, so I guess that's the new motherboard, as the cover of the keyboard does not work (not that it worked very well before - another thread). Can I have another motherboard spent the night, or return everything and just buy a new laptop, which would probably not be almost as beautiful as the one I have (230 GB SSD, second disk, screen 18.4 "HD) any thoughts? I had to walk away for a day because of the frustration. It is not like putting a motherboard in a desktop computer - even though I'm about half an hour to go back.

  I got a new MB by FedEx, installed today and fortunately use my laptop.

• Installation problem after replacing the motherboard

  Hi all

  After downloading and installing PremierePro through the creative cloud using ADM, I had to change the motherboard of the computer.

  At it again - Photoshop and illustrator are working well but PremierePro is nowhere to be seen.

  ADM, said the program is installed and so allow me not to repair or re - download.

  I found AdobePremierePro.exe, which I assume to be the launch of application program but when run I get system error - the program cannot start because exrces - c_3.0.dll is missing on your computer.

  Any ideas on how should I proceed?

  Thank you

  Mike

  See if the following can help:

  http://pcsupport.about.com/od/findbyerrormessage/a/libgdk-Win32-20-0-DLL-not-found-missing - error.htm

  If this is not the case, try Google search using terms that you identified ("lack of exrces - c_3.0.dll") and see what remains is available about this error.

• Satellite P200-1EE - Vista stuck on the homepage

  Hello

  * My Satellite P200-1EE is stuck on the progress bar Windows Vista since yesterday morning * and I'm unable to contact my office.

  I tried several solutions using the F8 key at startup.

  1 / safe mode

  2 / startup repair. "Windows cannot repair this computer automatically.

  3 / the system restore. "No restore point.

  4 / windows complete PC Restore. "No restore point.

  5 / Windows memory diagnostic tool. It is said that there is no problem of memory.

  So I am only left with the options of 'Restore the full Windows operating system' and the 'command prompt '.

  But I'm not too sure of the latter option. That's where I need your advice.

  * If I go for complete Windows restore, the entire hard drive fade or just the partition where I have windows (for example, "C:")? * I have several years of family photos on another partition (D or E) that I would not lose enough.

  Obviously, * I do not lose data or software on C:, but not personal stuff D or E.*
  Could you advise me on the best option?

  Thank you

  Paul

  > If I go for complete Windows restore, the entire hard drive fade or just the partition where I have windows (for example, "C:")? I have several years of family photos on another partition (D or E) that I would not lose enough.

  Depends on the disc that you would use if you want to use the Toshiba recovery disc, then the whole HARD disk would be formatted, including all partitions on the HARD drive.
  If you want to use the disk in Microsoft Windows Vista, you can choose which partition has been formatted and where the Vista must be installed.

  > Clearly, I do not lose data or software on C:, but not personal stuff on D or E.
  > Could you advise me on the best option?

  If you n t want to lose the data stored on the D partition and if you don t have a disc of Microsoft Vista, install the OS of Visa then I would recommend, remove the laptop HARD drive. Then plug the 2.5 SATA HDD with a USB-SATA controller then this HARD drive to another computer.
  Usually, you should be able to access the D partition and would be able to move all the data to another computer.