Menus and application instance

Similar Questions

• by clicking on the apple logo, menus and check boxes do not work on the first click

  Strange behavior from El Capitan OS X 10.11.1.

  When I click on the Apple Logo, menus, and check boxes, the action does not stick.

  To open the Apple Logo, the menu appears quickly but then folds upwards, as if I had not clicked.  Pretty well, click on the third, the menu opens.

  In the Finder, when I click on a menu like file, edit, or display, the menu appears, and then restores upward. Again, after three clicks in opens.

  In Safari, on a page Web, clicking on a checkbox does not stick. I need to click three times.  I when in Safari settings to clear the cache, I also checked the box to request the site "don't follow me." And even in the actual application of Safari, the box wouldn't fit.  I clicked it three times before the box stuck.

  Installation program:

  iMac 24 - early 2008

  4 GB

  El Capitan 10.11.1

  I changed the mouse, and this has solved the problem.

• strange question Application: instance()

  Hi all

  I have this strange problem if the following code is executed as a slot:

  void myapp::SomeSlot(QString result){        1. Label * pChild;
      2. pChild = bb::cascades::Application::instance()->findChild("testDialogLabelUser");
      3. pChild->setText(result);}
  

  It works very well. But if I have another static member function invoke the above code, on the 2 nd line, pChild is 0 - and this is why the code does not work. This may be the cause of ideas? PS This is the static function:

  void myapp::Wrapper_To_Call_Display(void* pt2Object, QString text)
  {
  
      myapp* self = (myapp*) pt2Object;
  
        // call member
      self->SomeSlot(text);
  }
  

  Solved.

  Apparently, the problem was that until the signal has been issued, I was showing the QML file that contained the testDialogLabelUser Label, this was however not the case more withth the static function...

• How can I bitlock a device without going through the appropriate menus and related software to lock and unlock a device?

  Original title: ILO-locked usb device

  I have a 64 GB... new USB key... and put music on it. After a while, I decided to use it for another use, but could not remove the files because the device is write-protected. I never write protect anything.

  I had an individual look of microsoft cert to the USB and he said it was not locked.

  I did some research on bit locker and Win 7 Pro and discovered that I can't find the Group Policy Editor where all bit locker said tech data is located.

  So, how can I lock bit, a device without going through the appropriate menus and associated software application necessary to lock and unlock a device?

  Hello

  When you turn off BitLocker, you can either disable BitLocker temporarily or to decrypt the volume. Disable BitLocker allows TPM and other minor changes module changes the system. Decrypt the volume means that the volume will be entirely decrypted, and that all the keys are ignored. You must decrypt a computer before the operating system upgrade. Once a volume is decrypted, you must generate new keys through the encryption process again once, if you want to enable BitLocker.

  Before you start

  > You must be logged in as an administrator.

  > The volume must be encrypted.

  To turn off BitLocker Drive encryption

  (a) click Start, click Control Panel, click Security, and then click BitLocker Drive Encryption.

  (b) from the BitLocker Drive Encryption page, find the volume on which you want BitLocker Drive Encryption goes off, and click turn off BitLocker Drive Encryption.

  (c) what level of decryption do you want the dialog box, click disable BitLocker Drive Encryption or decrypt the volume as required.

  (d) by performing this procedure, you have disabled BitLocker or decrypted the operating system volume.

  For more information, see the articles:

  Turning off BitLocker Drive encryption

  How to use the unlock options in BitLocker Drive encryption?

  Protect your files using BitLocker Drive encryption

  Hope the helps of information.

• How to show the IOM application instance account password in the user interface

  Hello

  I would like to see IOM application instance account password.

  In OPAM, there is a "show password" button.

  Is it possible to do the same thing in IOM? If so, how?

  TIA

  Leo

  Customized using managed beans sound possible, you can try something similar to the example below:

  IOM Managed Bean example: password reset custom

  http://oraclestack.blogspot.in/2014/12/OIM-managed-bean-example-custom.html

  Or if its requirement quite normal for all users, it must be visible, then you can create a new field in your form to process and fill in the application form as pop prerequisite. But this is not recommended.

  ~ J

• How to limit rights to an Application Instance per user?

  This excellent post, I learned that I we can assign a form field to the notion of the right of an Instance of the Application.

  Is it possible to restrict the list of rights to an Application Instance per user?

  I mean, is there a way to show for example all rights for a user and only one or two for user B when the user submitted a request for clearance of a specific Instance of the Application?

  If so, is it possible to model the business logic using only the IOM or should I write my own business logic module for that?

  TIA

  Leo

  Without custom code to set the users it will show for in the catalogue, the OOTB option is based on the membership of the organization.  In the Administration Console system, if you go to all instances of the application, you can see which organizations you have published the application.  The same goes for the rights of this forum, you can also see which organizations law is published on.  It is the only default way to do this.

  -Kevin

• create the missing icon against the section of the form of the application instance

  Hi all

  I use OIM 11 g R2 PS2, and I see that create icon missing against the section of the form of the application instance. I am trying to create an instance of the application, and when I try to load the form, I don't see the icon 'create' at all.

  Is this a known problem. ?

  Thanks in advance.

  This changed in OIM 11 g R2 PS2 version. To create resources for the instance of the application, you must follow the steps below:

  1. connect the console to sysadmin

  2. create a sandbox

  3. go in Configuration--> Form Designer--> select the resource type--> click on the button create

  From there, you can create the form. Once the form is created, it will be visible in the Instance, application from which you can modify the same.

  HTH

• Install PT8.53 with Linux question: connection process Data Mover and application designer

  People,

  Hello. I install PeopleTools 8,53 Internet Architecture.

  Server database is the database Oracle 11 GR 1 material.

  Operating system is Oracle Linux 5.

  I installed successfully JDK7, WebLogic Tuxedo 11 GR 1 material and PeopleTools 8,53 10.3.6, in Oracle Linux 5.

  
  I've been setting up of database PeopleTools8.53. Because the Wizard installation problem, I created PeopleTools 8,53 database manually by using starter PT853 Oracle database instance. I have run the following scripts:
  (1) utlspace.sql
  (2) dbowner.sql
  (3) ptddl.sql
  (4) psadmin.sql
  (5) psroles.sql
  (6) connect.sql

  
  Then, we perform Data Mover script in a Windows XP Client computer to fill the PeopleTools PT853 database machine Linux Sever instance.

  I installed Oracle Database 11 g 2 client for 32-bit Windows XP 64 - bit Windows virtual machine and run it successfully.

  In Oracle Linux 5 Server Machine Net Manager:

  Service name: PT853
  Connection type: default database
  "TCP/IP Protocol".
  Host name: 192.168.196.102
  Port name: 1521

  Listener: LISTENER
  Protocol: TCP/IP
  Host: 192.168.196.102
  Port: 1521

  
  I test the Service PT853 with "SYSADM" username and password "SYSADM". The connection is successful.

  In the Windows XP Client computer, the information in the Net Manager is the same, and the connection is successful as well. Its details are as below:

  
  NET Service Name: PT853
  Protocol: TCP/IP
  The host of the database Machine name: 192.168.196.102
  Port number: 1521
  Name of the Basic Service: PT853
  Connection type: default database

  
  This means that Windows XP can connect to Oracle Linux 5 successfully. But in the computer Windows XP Client, Data Mover and application designer cannot open a session in PT853 Instance of database in the Linux Server machine. Its details are below:

  Configuration manager:
  Type of database: Oracle
  The database name: PT853
  User ID: SYSADM
  Connect ID: people
  Connect password: people

  Data Mover:
  Type of database: Oracle
  User ID: SYSADM
  Password: SYSADM

  Application Designer:
  Type of database: Oracle
  User ID: SYSADM
  Password: SYSADM

  When connect Data Mover and application designer, I got the same error:

  ORA - 12154:TNS: can not resolve the connect identifier specified. Invalid user ID and password for the access code.

  According to my understanding, process connection Data Mover and the application designer requires 3 tables in SQL Server: PSOPRDEFN, PSACCESSPRFL, PSSTATUS. I'm not sure the process of connecting to the Oracle database. I checked the database PT853 instance in Linux, and there is only one table "PSDBOWNER" created by the scripts.

  My question is:

  Can any folk tell me the connection process Data Mover and Oracle database application designer? Requires only one table "PSDBOWNER"?

  Thank you.

  Oh my, many mistakes action here. If PSDBOWNER doesn't have a line, it must be solved at the time that the error came out. The replacement by SYSADM first why? Why is complaining already existing SYSADM? Most likely, you HAVE created manually, where you shouldn't.

  Again and again the same story. And again, sorry to say but you should take the basics of Linux training, Oracle training bases and sorry to be hard but reading training as well to read correctly the Peopletools Installation Guide where all required steps are really described in details.

  I don't think anyone can help you across the network in this respect,

  Nicolas.

• Problems with tables of Menus and Menu items

  The short story's I am a graphic interface for application design, it has a lot of menus and menu by menu items.
  I thought as in normal Java, I could simply do an array of Menus and many of the menu items. My problem is that it compiles fine, but spreading tons of exceptions. I use Netbeans as my IDE.
  
  Here is a sample of my code. Is not all that, but that's the part I have printing has problems since he worked before moving to tabular form.
  
  
  
  
  [Menus] Menu = Menu new [11];
  menus [0]. SetText ("file");
  File [] = new MenuItem MenuItem [8]; DEFINITIONS FROM FILE MENU
  
  
  file [2]. SetText ("Open"); Open
  file [2] .setOnAction (new EventHandler < ActionEvent > () {}
  @Override
  {} public void handle (ActionEvent arg0)
  
  Element 'FileChooser' fc = new FileChooser();
  
  File = fc.showOpenDialog (primaryStage);
  
  }
  });
  
  leader [2] .setAccelerator (null);
  
  
  
  menus [0]. GetItems(). AddAll (file);
  
  Menu bar bar of menus = MenuBarBuilder.create)
  
  . Build();
  
  
  
  
  menubar.getMenus () .addAll (menus);
  
  
  VBox vbox1 = VBoxBuilder.create)
  . Children (MenuBar, scrollPane1, BTN)
  . Build();
  
  
  ap.getChildren () .addAll (vbox1);
  
  
  in any case the stuff compiles fine without error. But Netbeans spit exceptions as a guy who ate a bottle of ipecac and the bombs of programs.
  Here are some of them.
  
  Exception in the method of Application startup
  java.lang.reflect.InvocationTargetException
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
  at java.lang.reflect.Method.invoke(Method.java:601)
  at com.javafx.main.Main.launchApp(Main.java:642)
  at com.javafx.main.Main.main(Main.java:805)
  Caused by: java.lang.RuntimeException: Exception start Application, method
  at com.sun.javafx.application.LauncherImpl.launchApplication1(LauncherImpl.java:403)
  to com.sun.javafx.application.LauncherImpl.access$ 000 (LauncherImpl.java:47)
  to com.sun.javafx.application.LauncherImpl$ 1.run(LauncherImpl.java:115)
  at java.lang.Thread.run(Thread.java:722)
  Caused by: java.lang.NullPointerException
  to javafxapplication2. JavaFXApplication2.start (JavaFXApplication2.java:37)
  to com.sun.javafx.application.LauncherImpl$ 5.run(LauncherImpl.java:319)
  to com.sun.javafx.application.PlatformImpl$ 5.run(PlatformImpl.java:206)
  to com.sun.javafx.application.PlatformImpl$ 4.run(PlatformImpl.java:173)
  at com.sun.glass.ui.win.WinApplication._runLoop (Native Method)
  in com.sun.glass.ui.win.WinApplication.access$ 100 (WinApplication.java:29)
  to com.sun.glass.ui.win.WinApplication$ $3 1.run(WinApplication.java:73)
  ... 1 more
  Result of Java: 1
  
  I don't really know what to do. I would like some recommendations.
  If possible I would still use arrays of Menus and Menu items, but if this is not possible, I would like to know and understand why not.

  (Sorry, that swapped with your previous message).

  You have a NullPointerException because you try to reference menus [0] when it has not been initialized:

  Menu[] menus = new Menu[11] ;
  

  creates a reference to an array of 11 Menus, but not initialize them. So, each element of the array is null.

  menus[0].setText("File");
  

  throws a NullPointerException you are trying to call a method via an object reference (menus [0]) that is set to null.

  You need

  Menu[] menus = new Menu[11];
  menus[0]=new Menu();
  menus[0].setText("File");
  // or just replace those two lines with menus[0]=new Menu("File");
  

  and similarly, no doubt, for all other elements in the menus array.

  You have problems similar to sets of menu items.

  Edited by: James_D October 31, 2012 12:00

• OEM showing status Clusterware and ASM Instance down!

  Dear all,
  
  My database is RAC 11 GR 2 on Linux.
  
  My Enterprise Manager shows status Clusterware and ASM Instance down in the Cluster tab for a single node, while for the other node its ok.
  
  I tried to investigate the problem and not the folowings: (I also publish results)
  
  oracleasm listdisks
  Displays a list of all disks
  
  [grid@racnode1 ~] $ crsctl check crs
  CRS-4638: Oracle high availability Services is online
  CRS-4537: Cluster Ready Services is online
  CRS-4529: Cluster Synchronization Services is online
  CRS-4533: Event Manager is online
  
  [grid@racnode1 ~] $ crs_stat t
  Ora host name Type status of the target. CRS.dg ora... up.type racnode1 online
  ORA. FRA.dg ora... up.type racnode1 online
  ORA... ER.lsnr ora... uh game racnode1 online
  ORA... N1. LSNR ora... uh game racnode2 online
  ORA... DATA.dg ora... up.type racnode1 online
  ORA.asm ora.asm.type racnode1 online
  ORA. Eons ora.eons.type racnode1 online
  ORA. GSD ora.gsd.type offline offline
  ORA... network... ora rk.type racnode1 online
  ORA. OC4J ora.oc4j.type offline offline
  ORA.ons ora.ons.type racnode1 online
  ORA.racdb.db ora... se.type offline offline
  ORA... SM1.asm online racnode1 online request
  ORA... E1. LSNR apply online racnode1 online
  ORA... de1.gsd application OFFLINE OFFLINE
  ORA... de1.ons racnode1 online application
  ORA, ora... de1.vip t1.type racnode1 online
  ORA... SM2.asm online racnode2 online request
  ORA... E2. LSNR apply online racnode2 online
  ORA... de2.gsd application OFFLINE OFFLINE
  ORA... de2.ons racnode2 online application
  ORA, ora... de2.vip t1.type racnode2 online
  ORA, ora... ry.acfs fs.type racnode1 online
  ORA.scan1.VIP ora... ip.type racnode2 online
  
  When I see the newspapers for ASM, I see this error
  
  From FILIPE background process
  Wed Jan 18 10:53:23 2012
  WARNING: unable to ora diskgroup online resource. CRS.dg (unable to connect with CRSD/OHASD)
  Wed Jan 18 10:53:23 2012
  FILIPE started with pid = 24, OS id = 8172
  WARNING: unable to ora diskgroup online resource. FRA.dg (unable to connect with CRSD/OHASD)
  WARNING: unable to ora diskgroup online resource. RACDB_DATA. DG (unable to connect with CRSD/OHASD)
  Wed Jan 18 10:54:28 2012
  ALTER SYSTEM SET local_listener ='(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = racnode1-vip)(PORT=1521)))' SCOPE = MEMORY SID = '+ ASM1';)
  Wed Jan 18 10:55:01 2012
  NOTE: Customer ASM racdb1:racdb disconnected unexpectedly.
  NOTE: Check customer alerts log.
  NOTE: Process saved in /u01/app/grid/diag/asm/+asm/+ASM1/trace/+ASM1_ora_8768.trc State trace file
  
  Can someone help me get this error
  
  Kind regards
  Imran

  Hello

  try to confirm if the agent is ok and send the information to the grid.

  Export ORACLE_HOME =

  / bin/officer status emctl

  Download/bin/emctl

  Discover the emctl help.

  Concerning
  Hugo

• How to use FNDLOAD for functions, menus, and responsibilities

  Hi all
  
  I have a set of custom functions, menus, and responsibilities in an EBS 12.1.1 (Windows) I don't want to export using FNDLOAD.
  
  These exported objects can be imported again into a 11.5.10 EBS installation?
  
  I tried to export the menus by using this command:
  
  bin\FNDLOAD apps/apps@VIS 0 Y DOWNLOAD %FND_TOP%/patch/115/import/afscursp.lct resp.ldt FND_RESPONSIBILITY RESP_KEY = "TESIS_INVENTORY_SUPER_USER".
  
  and it worked OK (at least I think that was the case).
  
  But after the download in 11i system, menus are not there? What could be the problem? Here is the log:
  
  ---------------------------------------------------------------------------
  Application object library: Version: 11.5.0 - development
  
  Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
  
  module:
  ---------------------------------------------------------------------------
  
  Current system time is March 21, 2011 15:00:48
  
  ---------------------------------------------------------------------------
  
  Download from the menus.ldt of data file
  Changing environment NLS_LANGUAGE AMERICA database
  Dump files LCT/LDT (E:\oracle\visappl\fnd\11.5.0/patch/115/import/afsload.lct(115.58), menus.ldt) to stage tables
  LCT E:\oracle\visappl\fnd\11.5.0/patch/115/import/afsload.lct(115.58 dump file) in FND_SEED_STAGE_CONFIG
  Empty the LDT file menus.ldt in FND_SEED_STAGE_ENTITY
  Dumped the lot ( NULL , MENU MENU TESIS_INV_SUPER_USER) in FND_SEED_STAGE_ENTITY
  Download from stage tables
  
  ---------------------------------------------------------------------------
  Concurrent query ended with success
  Current system time is March 21, 2011 15:00:54
  
  ---------------------------------------------------------------------------
  
  
  
  Is it possible to export and import a menu without worrying about the functions used by the menu? So far, I don't have export and import functions and maybe I need to do this first!
  
  Thank you very much
  Konrad

  and it worked OK (at least I think that was the case).

  Please check the TDL file to check.

  But after the download in 11i system, menus are not there? What could be the problem? Here is the log:

  Is it possible to export and import a menu without worrying about the functions used by the menu? So far, I don't have export and import functions and maybe I need to do this first!

  If you have verified the data in the file ldt, please run FNDLOAD download command with 'WARNING = YES UPLOAD_MODE = REPLACE CUSTOM_MODE = FORCE' options and then check.

  Thank you
  Hussein

• Custom schema and the custom functions, menus and responsibilities

  Hi all
  
  My company has developed an integration of the EBS activate the third-party software create elements and other objects. We use a JDBC connector and call the underlying pl/sql API (such as EGO_ITEM_PUB. PROCESS_ITEM) Oracle. We have added some features, menus and responsibilities to our EBS 12.1.1 installation in order to provide a mechanism for access control for our JDBC integration because it connects directly to a db schema. We call FND_FUNCTION. TEST to see if the user connected / responsibility has the function it wants to call which are assigned to him. We also plan to use a custom schema, so that we don't have to plug directly into the apps schema, because we believe that our customer will not do. What do you think?
  
  I have planed to use FNDLOAD to download all the function menus and responsibilities to provide a script for our client, so that they can download simply all objects (menus,...).
  
  Now my issues are:
  
  Should they download these menus, functions and responsibilities in our custom schema or in the apps schema?
  
  The menus and responsibilities always defined in the apps schema?
  
  In the schema are defined if they are created in the GUI (oracle forms)?
  
  
  
  Thank you
  Konrad

  I would say FNDLOAD takes care to put all objects in the schema corresponding to FND/APPLSYS, right?

  Fix.

  What about subsidies for the apps schema? Don't the apps schema now on the new features, menus and responsibilities after the DOWNLOAD of FNDLOAD process?

  What grants you are talking about? The apps schema will certainly know about these new functions/menus/responsibilities (if not, you will not be able to see or access it from the application) - most of the data that is stored in the APPLSYS schema is accessible by the APPS schema.

  Thank you
  Hussein

• application instance will automatically unload?

  Hello

  I have an application on FMS. When a user connect to FMS, it will create an instance of the application. My question is that if all users that connect to him cut the instance will automatically unload?

  Yes - if all clients have disconnected from the application instance and 600 seconds have passed where he remained inactive - this instance of the application would be gc'ed leading to the application is unloaded. This is a configurable value - check MaxAppIdleTime application.xml or ApplicationGC in the Server.xml file

• Failed to load application instance publishLive/live.

  Full registry error is (_defaultRoot_, _defaultVHost_): failed to load application instance publishLive/live...  Flash Admin Server and Flash Media Server running on the local computer.  During the test I get [NetConnection object]: NetConnection.Connect.Failed.  When I delete the main.asc file it works... What is happening out there?  I got this job at a time... my main.asc is below.

  var nc;
  var ns;
  NSR var;

  Called when a client connects
  application.onConnect = {function (customer)}
  
  accept the new connection to the client
  application.acceptConnection (client);
  
  Send a message
  trace (client.id + "is connected");
  }

  Called when a client disconnects
  application.onDisconnect = {function (customer)}
  trace (client.id + Date()) "disconnection at"+ new; "
  }

  
  Called when the client publishes
  application.onPublish = function (client, livestream) {}
  
  trace (livestream.name + "publishes on request" + application.name);

  This is an example of using the publishing feature multipoint to republish
  stream to another instance of the application on the local server.
  If (application.name == ' publishLive/live') {}

  trace ("republish the ustream stream");

  NC = new NetConnection();
  NC. Connect ("rtmp://1.616528.fme.ustream.tv/ustreamVideo/616528");
  
  NS = new NetStream (nc);
  
  called when the NetStream server has a status
  ns.onStatus = {function (info)}
  trace ("stream status:" + info.code)
  If (info.code == "NetStream.Publish.Start") {}
  trace ("publishes the stream");
  }
  }
  
  ns.setBufferTime (2);
  NS. Attach (livestream);
  NS. Publish (livestream.name, 'live');
  }
  }

  application.onUnpublish = function (client, livestream) {}
  trace ("cancellation of publication is" + livestream.name);
  }

  REGISTRATION
  application.onAppStart = function() {}
  This.NSR = Stream.get ("livestreamSS");  "<-this is the name of the instance of server-side"
  This.nsr.Play ("livestream",-1, -1);          "<-this is the name of the instance published"

  this.nsr.onStatus = {function (info)}
  If (info.code == "NetStream.Play.PublishNotify") {}
  application.startRecording ();
  }
  If (info.code == "NetStream.Play.UnPublishNotify") {}
  application.stopRecording ();
  }
  for (var I in info) {}
  trace ("i:" + i);
  trace ("info [i]:" + info [i]);
  }
  }
  }

  application.startRecording = function() {}
  
  infoObject var = Stream.getOnMetaData ("livestream");

  trace ("metadata for mavideo.flv :");
  
  for (i in infoObject) {}
  If infoObject [i] == {"record"
  trace ("start recording");
  This.NSR.record ();
  }
  }
  
  }

  application.stopRecording = function() {}
  trace ("stop recording");
  This.NSR.record (false);
  }

  In your FMS installation directory, look in the newspapers/_defaultVHost_/publishLive and see if there are errors in the files applicationXX. If there is a syntax error in your code, it will appear here.

• Call stored procedures in the object module and application of entity

  Hello
  
  I've implemented a helper methods that contains the EntiyImpl base class to call stored procedures.
  
  Now, I need to call procedures stored from the module of the application.
  
  Apart from the creation of a module base class asks and the programme of assistance of duplication of code in the method is possible
  to share methods of assistance for calling stored procedures between the entity impl and application module impl?
  
  
  Concerning
  Paul

  Support code depends on characteristics of an object instance given entity beyond its database transaction?

  If so, I'm not sure I see how it could be used with a class of application module.

  Otherwise, here's what you do:

  Step 1:

  Set up the database transaction - you can even choose to. So instead of

  {myHelperMethod (Object someParam) protected
  DBTransaction trans = getDBTransaction();
  ...
  }

  This is for change

  protected myHelperMethod (DBTransaction trans, someParam Object) {}
  ...
  }

  Step 2: make the method public and static - once you set DBTransaction, you should be able to do.

  public static myHelperMethod (DBTransaction trans, someParam Object) {}
  ...
  }

  Step 3: Remove your EntityImpl base class method in a utility class:

  Public MustInherit class PlSqlUtils {}
  private PlSqlUtils() {}

  public static myHelperMethod (DBTransaction trans, someParam Object) {}
  ...
  }
  }

  When you call the method of application module, object entity or class of same view object, call

  PlSqlUtils.myHelperMethod (getDBTransaction (), paramValue);

  Unlike Transaction.executeCommand (), allows you to provide features like the setting procedure of parameter values, recovery of the values of the parameters, etc.

  Hope this helps,
  Avrom