Qosmio G10 - no sound on DVD playback

Similar Questions

• Qosmio G10 - pregnant sound of quality

  Hi guys, anyone of you have qosmio g10 owners experience quite ordinary sound of your speakers (harman/kardon), especially when you turn up the volume? Music CDs, mp3s, or even movies, speakers do not seem to manage fine bass at all? I called toshiba and they will take a glance at my machine... I just want to know if its just me or have all the guys encounter the same problem... to my knowledge, the sound quality of this device should be excellent crisp clear and very... any input would be much appreciated cheers...

  Hello

  I'm also owner of Qosmio G10. I must tell you that I am very satisfied with solid and very powerful harman/kardon speakers. The only thing I can recommend is to check that all the sound settings. Please check that all the parameters to Toshiba virtual sound tool especially restore settings by default so the basic settings is the position WE.

  I noticed that all the options have a strong influence on the sound quality and it is possible to set the quality sound for each type of music.

  My configuration is:
  Size of the speaker 200 Hz
  TruBass level 75%
  UPDATE level 76%

  Do not forget that each player has an own equalizer and there you can also try to find out which setting is one that fits your needs.

  Good bye

• Qosmio G10 - no sound!

  Hello! I just purchased a Qosmio G10 and completed the introduction for the first time and no sound speakers. When I plug in my headset I can hear everything (.wav, mp3, cd,...). Help?

  Hello Valerie

  If there is no way to make the speakers work please contact your dealer and try to change the unit. I don't know, but it is possible that small switch between speakers and headphones doesn't work properly.

  Please let us know if you got a new unit or if the speakers work again.

  Good bye

• No sound when dvd playback pre-recorded on lcd/dvd combi 22DV501B

  I hear during playback of the CD or the DVD that I burned myself, but when I try to play any pre-recorded DVDs. Although the image is fine, there is no sound at all. I've looked through all the options settings, but can't see anything that could be the cause. Could someone help please?

  Sorry mate but I don t think its 22DV501B LCD/DVD device issue.
  I think that the pre-recorded DVDs use an audio codec that isn't taken in charge by the DVD player.

  To compare this, you should try to play the original DVD movie.

• No sound on DVD playback and the size can be reduced to half of its original size

  Hi, I have a few problems on my DVD player after you install the windows media player 11.
  No sound during playback and the size can be reduced to half of its original size.

  Can someone show me how to fix tat?

  Hello

  you have a codec pack and/or a DVD player separated installed on your system? If not, then try, because play DVD´s with MediaPlayer 11 is not very comfortable and
  you encounter errors, for example you have.

  I suggest you: download a codec pack (for example K-lite or something: http://www.free-codecs.com/download/Codec_Pack_All_in_1.htm) install it and maybe try to use another dvd as "Media Player Classic" player that plays almost every videofile/DVD/etc. that exist.

  Hope I could help you

  Welcome them

• Sounds (music and sounds efects) but no speech in sound of DVD playback. Vista

  Real Player doesn't work at all with DVD

  Windows Media Player does not load even

  Windows Media Center plays a DVD with sound effects and music, but no speeches.

  I have tried different DVD including the new ones, all with the same result.

  Hi, you can read the article and check. Solve problems in Windows Media Player http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-problems-in-Windows-Media-Player

• No sound during dvd playback in media center after installation of Vista Edition home premium

  I don't know what the sound problem was fine when I had xp and I still all other sounds from applications etc. but no sound when playing DVD is wmc or play on my computer hp laptop quick

  No guarantee... but installing an AC3 Filter can be
  worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  AC3 Filter
  http://AC3Filter.NET/projects/AC3Filter/releases
  (tests - AC3Filter 1.63 full b)

  Good luck...

• Qosmio G10 - no sound with external speakers

  When I connect external speakers, no sound coming from them, on the built-in speakers. Could this be a hardware problem?
  Thanks for your help.

  Hello

  You didn't explain what happening exactly when you put the audio in Audio out port Jack. Now integrated speakers shouldn't be active any more. If they still work, I guess this little mixer of audio port which allows to switch between internal and external stakeholders can be damaged.

  If there is any attempt of trying to connect headphones or external speakers to make sure that no sound is at all.

  Good bye

• Qosmio G10-133: cannot burn DVDs more

  Since the first day I was never able to record on a DVD. I've tried many discs. Different software. I get that day, but when the deer of burning starts, he discusses the creation of a newspaper report. Any ideas.

  Do I need a new rom?

  Hello

  I guess it was possible to burn DVDs to the start time.
  Well, it's not easy to say why it doesn t burn DVD media.
  Sometimes, perhaps because the wrong lens calibration.
  But in this case, you should replace the disk.

  Also a non compatible DVD media could be responsible for these issues.
  Please see the manual for the DVD compatible and tested.

  You can also try to remove the drive from Device Manager. After restarting again the operating system should recognize the drive again.
  Then check if it of possible to burn DVDs

• Qosmio G10 graphics and sound driver installation

  Hello

  Recently, I tried to reinstall my Toshiba Qosmio G10 after you download all the latest drivers from the Toshiba site.

  Unfortunately I had my motherboard and the screen replaced in the last 3 years (under warranty), which means everything has changed since the original laptop, I bought (now a map graphic, NVIDIA GeForce go 6600, new chip set, etc., as far as I can remember).

  Someone at - it a system restore cd or a place I can download the appropriate drivers for this laptop.

  I am a sys admin and technical and spent about 5 hours, pulling on my hair, trying to get the drivers video and sound work.

  Hello!

  It is pretty easy to get drivers for a laptop of Toshiba.
  Looking on the Web from Toshiba site?

  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
  Search for Qosmio G10, then you will find it.

  Good bye

• The Qosmio G10 DVD burner replacement

  My DVD burner was unable to get out and must be replaced. It is a UJ - 831S. I bought the same one, but I got an error of CD-ROM at the beginning upward. I tried this new CD-ROM on another laptop (Toshiba Satellite 2800-300) and it worked fine. I think I have a problem with the configuration of my DVD burner (c - select, master...). Do you know if can change the firmware of my DVD writer?
  Thanks in advance,
  Alain

  Greetings Alain,

  Yes, the problem here is the ID of engraver of DVD (CSEL) UJ - 831S. You must have the carpet * a DVD burner connected to the secondary IDE Atapi port as a master flash.
  Probably your G10 is recognizing as an oucederomsurlesecondport IDE IDE slave secondary.
  Unfortunately there is no firmware to change the internal Atapi drive ID.
  You can ask Toshiba for the firmware, but I think that they will not give him to you.
  The best thing is to share the UJ - 831S for the carpet * 831B - UJ part number: P000409790 Qosmio G10 model: PQG10U-00Y00L,.
  Please confirm first if your G10 model.
  When you go to the Exchange, please ask them to first test the DVD player. Better not make mistakes, here.
  All of these discs are Panasonic (mast * one) corporation.

  Good luck
  Francisco

• Qosmio G10: How to get Toshiba virtual sound in the taskbar

  System: Qosmio G10 running Windows XP.

  When I bought the system, it came loaded with application of 'Virtual Sound' of Toshiba, which has replaced the standard Microsoft Volume control app in the XP taskbar (bottom right of the screen). Now, the 'Volume Control' standard app appears in the taskbar.

  How to bring back the "Virtual Sound" app? It allows me to switch easily between defining the sound of the internal speakers of the laptop and using bigger speakers.

  Thank you!

  Ben.

  PS. love Qosmio!

  When you start the virtual sound application icon should appear in the taskbar.
  Try right-clicking on the application. Maybe you'll get an option to place in the taskbar

• Qosmio G10: player can work only DVD and CD but not the CD

  I have trouble with my Qosmio G10. DVD - RAM can only run autorun CD and DVD, but it can not run the CD. When I installed daemon tools he started to read not burn and I uninstalled and installed my CARPET * A DVD - RAM UJ-8205 of pilots again and again but nothing changed.

  What should I do? If you know it please send me a message to [email protected] please...

  Hello

  It seems that all 3rd party applications could have a bad influence on the reader.
  It happens with a new OS installed since the Toshiba Recovery CD?

  Additional access properties of disc (right click) and check the recording tab. The engraving option must be enabled.

• Qosmio G40-108: bad quality video/DVD playback

  I have new Qosmio G40 108 loaded with Vista Ultimate and am very disappointed with the quality of video/DVD playback compared to the older machines loaded with XP. Seems insipid depth bland, not really the color and not too strong. I tried another laptop of another manufacturer and pretty much the same thing!

  What is Vista's fault? You want to try XP but blocks me when I boot with XP disc in. I would like to run the two to see if there is a difference. (Sorry to all if this appears as message repeated hurry but bad touches earlier - starting!)

  I don't have a notebook, G40 but I use the Vista OS and I must say that the video and the quality of the DVDs is great!
  Don't know what DVD software you use, but I use the WinDVD and Windows Media Player. Two applications provide the same quality.

  > I tried another laptop of another manufacturer and pretty much the same thing!
  According to your own statement I don't think that there is something wrong with the Qosmio G40 laptop because you have the same opinion on the other non-toshiba computer.

  PS; I wonder why you start always different threads on the same topic:
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=107067#107067

  However, if you wish, you can test the XP if the same phenomenon occurs with other OS.

• Qosmio F10: Jerky in Qosmio Player DVD playback

  Hello world

  I have a problem with Qosmio player. Although the quality of the image of the DVD playback is very good, reading itself is terribly agitated, at a rate of about 10 to 15 frames per second, I guess. Playback in Windows XP works fine.

  Someone at - it suggestions? What is a BIOS problem?

  Thank you!

  Have test you with original DVD movies or some cottages created DVD?