Merging databases and memory settings

Similar Questions

• Change it back Cpu and memory settings back to normal.

  Hi all

  We have an environment vSphere with 50 guests and 800 mV.

  For some reason any environments with limited resources in most of our VMS is strange, for example actions customized for Cpu and Mem are value.

  There are also limits on some virtual machines...

  We do not want its limits and reserves, we do not want custom values.

  We want it to be default, for example 'Normal' without reserves or limits.

  Now we are VMs 'right click' and change the CPU and MEM value to normal, we also check the unlimited area.

  It of a very boring job and takes a lot of time...

  Is this possible to do with PowerCli?

  Concerning

  Tyler

  Arnim code will work of course, but why use a SDK method when there is a cmdlet to do.

  This will outline reserves to 'normal' and the limits of 'unlimited '.

  $vmName = 
  
  Get-VM -Name $vmName | Get-VMResourceConfiguration | `
       Set-VMResourceConfiguration -CpuSharesLevel "Normal" -MemSharesLevel "Normal" -CpuLimitMhz $null -MemLimitMB $null
  

  And to do for each host, you use the script logic 2nd Arnim

  Connect-VIServer "vCenterServer"
  
  Get-VMHost "yourVMHostName" | Get-VM | Get-VMResourceConfiguration | `
       Set-VMResourceConfiguration -CpuSharesLevel "Normal" -MemSharesLevel "Normal" -CpuLimitMhz $null -MemLimitMB $null 
  
  Disconnect-VIServer "vCenterServer" -Confirm:$false
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Settings of CPU and memory of reserve on the virtual machine running...

  Hello.

  I have two virtual machines in production with CPU and memory settings of reservation applied as shown below. I want to adjust these settings of reservation to "zero" for the CPU and memory on both virtual machines.

  I can make these adjustments while VMS are running, or do I need to power their first?

  Any advice would be appreciated.

  Thank you!

  

  

  Welcome to the community,

  Booking of resources being completely transparent for the customer, i.e. a host function, there is no need to turn off the virtual machines. Basically all settings in are available to be changed in the editable GUI generally without interruption of service comments.

  André

• Proposal of 12 databases and merge Middle-ware.

  Hi all

  I'm not sure that the question here is relevant or not, if not then please accept my sorry for that.

  We will go to 12 c database and merge middle-ware of database 10g.

  our manager asks me to develop a proposal for it, so I request and pass on to management.

  I wonder what should I include in this proposal?

  Thank you

  Looks like you need for more details of what to include in the proposal.

  New features in oracle 12 c?

  New features of grid below 12 c?

  New architecture of the CBD 12 c?

  RMAN enhancements on 12 c?

  The list goes on and. Without knowing what is the first and most important for your business you can just give them the 'New features 12 c' book as a proposal.

• This will remove all your custom settings and the settings of many extensions.

  Hello

  I was reading this article of knowledge and he says:
  "This will delete all your custom settings and many extensions settings."
  What are the custom settings?

  for example one of these and what else
  bookmarks?
  Add - ons?
  Top toolbar - Customize the toolbar
  Add on the toolbar
  Firefox/preferences
  Authorization Manager settings
  the new page open

  Corrupted preference file
  File preferences may be corrupt, Firefox prevents writing to it. If you delete this file, Firefox will automatically create another when it comes to.

  Here's how to delete the prefs.js file.

  This will remove all your custom settings and the settings of many extensions.
  Open your profile folder:

  In the menu bar, click the Help menu and select troubleshooting information. The troubleshooting information tab will open.

  In the section the Application databases, click view in the Finder. It will open a window with the folder of your profile.
  Note: If you are unable to open or use Firefox, follow the instructions for finding your profile without having to open Firefox.

  In the menu bar, click Firefox and select Quit Firefox

  Locate the prefs.js file (and, if applicable, the prefs.js.moztmp file).
  Delete these files and files prefs - n.js where n is a number (e.g. prefs - 2.js).
  If there is, remove the Invalidprefs.js.
  Restart Firefox. You should now have reset all preferences.

  Based on information from preferences not saved (mozillaZine KB)

  See also http://kb.mozillazine.org/Profile_folder_-_Firefox

  #1: there are too many pref for all kinds of adjustment which will offer a recipe of what you lose and how to keep certain parameters.
  It is possible to copy specific lines of a prefs.js to this file in another profile or restore some settings after deleting this file in the current profile folder.

  All the prefs that show as a user defined and appear in bold on the topic: config page are stored in the prefs.js file.
  
  This includes the changes you make and data Firefox itself and extensions store as data/parameters in a pref.
  It's

  #2,3: the localstore.rdf file stores the toolbar configuration and other data.

  #4: the current versions of Firefox shows the menu entry "Tabs" at the top menu ' display > toolbars "and" Firefox > Options ' and in the menus toolbar pop-up if the tabs are not in the default position on the top.
  
  If the notches located on the top and the menu entry is not available and you want to move the tabs under the navigation toolbar, then you have to toggle the pref browser.tabs.onTop false on the subject: config page.
  
  A restart of Firefox is necessary for updating the menu entry to display or remove.

  Note that this pref will no longer effect when the code Australis lands on the output channel (code Australis will probably land in Firefox 29).

  #5: see https://support.mozilla.org/kb/Clear+Recent+History

  Compensation of the "Site Preferences" clears all exceptions for cookies, images, pop-ups, installing the software, stored passwords in permissions.sqlite and other site specific data stored in content - prefs.sqlite (including zoom on the page).

  Deletion of cookies will delete all specified (selected) cookies, including cookies with an exception allowing you want to keep.

  #6,7: history of search bar is the story of the search bar (Google) on the Navigation toolbar.
  
  All recorded data to a form on a web page is included in the data in the form, but you can not separate and distinguish the two.
  
  Browsing history is the history of the web pages you have visited.

  • Form history control: https://addons.mozilla.org/firefox/addon/form-history-control/
  • Tahoe Data Manager: https://addons.mozilla.org/firefox/addon/data-manager/

  #8: session cookies are always kept in memory and never stored on the disc in cookies.sqlite
  
  You can only delete specific cookies manually in the Cookie Manager or leave cookies expire when you close Firefox to make them behave like session cookies.
  
  Cookies of other compensation will include all cookies and don't obey the exceptions that you have made.

  #9
  Data stored in storage DOM is not stored in cookies.sqlite, but it is generally stored in the webappsstore.sqlite file or possibly in the form of data in IndexedDB.

  • https://developer.Mozilla.org/en-us/docs/Web/Guide/API/DOM/Storage
  • https://developer.Mozilla.org/en-us/docs/IndexedDB
  • https://addons.Mozilla.org/en-us/Firefox/addon/Foundstone-HTML5-local-storage/

• Difference between memory settings

  Hello
  When I checked in my database, I saw these memory settings in my pfile file and I see that duplicate values.
  can you tell me the difference between
  Instance1.__db_cache_size = 939524096
  Instance2.__db_cache_size = 1040187392
  
  and
  
  * .db_cache_size = 1342177280
  
  which is justifiable? and what is the purpose of these two different ones?

  allows a we have 2 node RAC DB

  I want to put a parameter that must have the same value on both cases, lets say, I want to set db_cache_size even in both cases, so I'll use following:

  * .db_cache_size =

  But later I decided I want to increase or decrease the size of the DB_CACHE_SIZE on one of the instnace leaves the floor on the first instnace

  so, I'm going to enter as follows:

  instance_1.db_cache_size =

  So, in pfile, you will see these two values, but the specific parameters of the instance (IE instance_1.db_cache_size) will be a substitute to the
  parameters of the large cluster (*.db_cache_size)

  coming to the second node, we have not specify the input related to it, so size of second instance will be identical to the value of the *.db_cache_size parameter

  -Thank you,

• Graphics update and memory for my A30 161

  My Satellite A30 161 uses 64MBRadeon and 512 MB of memory, the way I use it from the moment looks like im will need an upgrade on my chart and memory. Toshiba can this do?

  Hello

  I think that your graphics card shares its main memory with your RAM and you should be able to adjust the amount of memory allocated to your VGA card since then in the BIOS. The maximum value allowed is 128 MB and can be selected in UMA memory allocation in your BIOS settings. Note that it will have to reduce your available RAM as a result.

  HTH

• C++ = > LV: array, pointer and memory problem

  Hello

  To research and spent a few days on this...

  I have the following function in C++, which returns a pointer(float *) in an array of float, I need to be dumped in a block of code. I created the DLL and I loaded it in the DLL to LV function (everything is ifne I see and I add the parameters) and accordingly implemented the following example. I then had to find a way to get the pointer to work. All the examples use U32, not a float... There is no float * double or type... back... How is it that is managed?

  So I think I'm sort of on the right track by searching and using the example here:

  http://www.NI.com/example/28672/en/

  I'm sure that isn't true, b/c I simulate the DLL code in MSVS and it works perfectly, but when I have the port, the data are bad... but I get size of 4 floats. ALSO... the memory of DLLS don't reset... so if I run it for the first time, it will calculate the data for n = 0 ==> = 1000 n (see photo), but the next run instead of repeat when I press play, data will begin to n = 1000, ==> n = 2000 all I want to do is pass an array of size 3 type of float data our of my DLL , and in labview... race LV and then stops, the memory will NOT keep its value but reset...

  Here's the function, call others, but you can see:

  char * getYawPitchRoll (float Gx, float Gy, float Gz, float Ax, Ay float, float Az, __int32 msTimeStamp)
  {
  char * YPRptr = YPRDEG; SIZE OF 3 FLOATS DATA TABLE
  getYawPitchRollRad (Gx, Gy, Gz, msTimeStamp, Ax, Ay, Az); written in an array (float) of global variable 'YPRDEG '.
  UpdateYPRDEG();
  Return YPRptr;
  }

  Also attached photo of LV code and library settings *.

  Why is it so ridiculous for LV to manage?

  Please help, I'm out of gas here.

  Thank you

  -Peter

  You must change the table Type, then set the table on pointer data in Table Format. I've never had this problem with variables keeping their previous value and my C is a little rusty, so I'm not sure your problem of Globals. If they are initialized on charge then Taki solution should work, even if repeatedly loading and unloading of the dll should not be necessary. Or maybe you could initialize the when you call your main function? MC

• Computer says disk C and F are weak and memory Windows is very low. and I have the same thing in so many programs.

  I have windows xp home edition, he received from a friend. Tells me disk C and F are close to full. Make cleaning disc, but not enough. AND says the window is very low on storage space. Don't know what to delete and keep programs are

  http://Windows.Microsoft.com/en-us/Windows-Vista/preventing-low-memory-problems

  Read what you and answer a few questions about your system:

  1. What is your current antivirus?

  2.

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  You can change the personal information.

  3. look in disk management, how many partitions? How much free space on each?

  4. optimize your pc:

  Stanley Zhang tips

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  ·                                 MalwareBytes (FREE)

  ·                                 SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

• Difference between (minidump) and (memory.dmp)?

  Separated from this thread.

  is there a difference between (minidump) and (memory.dmp) I use windows 10

  The main difference is size. Memory dumps are larger and contain a bit more information.

  In most situations, it is best to configure the computer to produce a dump of memory the kernel in case of system failure. A complete memory dump is a very large file to manage so it is more convenient to work with kernel images of memory when you try to resolve the blue screen errors.

  I suggest that you change your dump file settings to produce an image kernel memory. Select the hotkey Win + X , Control Panel, system, advanced system settings, Advanced tab, and click the button settings to start recovery. Under system failure, select the checkboxes before to write an event to the system log and restart automatically. Change the option Write debugging information by using the scroll to the right for image kernel memory. Click OK , and in the next window, click apply and OK. Restart your computer to apply the changes.

• Virtual memory settings don't save don't properly in Windows 7

  I have a W7 Ultimate 32B.  At startup, I get a return Options Popup window indicating that I don't have a paging file deposit.

  So I choose advanced / change

  Check handle automatically, accept, then OK, OK.  Restart the system.

  To restart, he forgot the settings and I have to repeat the same series until I have just cancel it without having a swap file...  How can I solve this problem?

  Thank you very much!

  JoeG

  The problem resulted from a rights issue.

  Here is the solution:

  1. Start button
  2. In the search field type: commandprompt
  3. When the list appears, right click on command prompt litem and run as administrator
  4. When the command prompt window, type:
  5. SC config afs start = disabled
  6. Then change the virtual memory settings, OK, apply etc.
  7. Reset

  It fixed the problem!

  Thank you all for trying to help

  my best always,

  JoeG

• Media of blackBerry Smartphones and memory Question

  Silly question maybe, but... when I open an audio file (such as a song or a clip radio or something similar) online to listen to it, but I didn't save it on my BB, I used no memory just by doing this? Does this question make sense?

  When you open the file attachment, it goes into the "attachment data" database and cannot be removed unless you remove the message that contains the attachment.

  When you open the file from the browser, just in the browser's cache until it is cleared

• How to set the processor affinity and memory.

  We have explicit recommendations of our application provider to set the processor affinity for one of our virtual machines running their product. However, this process is not quite clear to me despite the available docs. We are company ESXi 5.1 more.

  By looking at the tab "resources" for the parameters of the virtual computer you see under CPU:

  Actions (I would do that quite high so that it never goes to confront other good?)

  Booking

  Limit

  The requirement is to set aside x cores for the virtual machine while it is never claim to waiting or resource. They would also potentially implement affinity memory related to the same socket for the effectiveness of the NUMA node.

  We have a host with 2 8-core processors with 256 GB of memory. I'm not worried about the affinity of memory. This should be as simple as the control that the 'reserve any memory comments' correct?

  Is it simpler just set up a pool of resources for cela CPU and memory? The only concern I have is it if the processor uses the same memory channels. We do not want a CPU into a socket using the channel memory of another plug for this virtual machine.

  And it's too late to go back to physics for this system.

  Eeghads! Just FYI, the processor affinity is almost never what a seller really wants, even if they think they do. I can imagine there are valid use cases, but I spoke with several vendors who recommend this, and they were all wrong.

  From what I understand in your summary, the application is sensitive to the latency of the CPU. If the physical compute capacity, actions and reservations will address the latency. Latency is the only reason why they want to set the affinity, or are there others? If there is other, know what they are, because there is a good chance to those who are also invalid reasons. The processor affinity tends to exacerbate the problems you're having with loans time CPU and can often cause latency application MORE CPU than that without it. Yes, you can set up reserves of CPU to address these issues for this particular virtual machine, but you made life more difficult for the CPU scheduler. DRS involved in the loan time CPU, which means she won't necessarily move these other virtual machines on this host, even if they are jointly stop like crazy. While we're on the subject, this virtual machine would need to be excluded from automatic DRS migration, since you cannot vMotion with the processor affinity configured. It also means the virtual machine must be powered whenever his current host goes into maintenance mode.

  In any case, verification 'reserve any memory comments' will not affect memory locality. Will just leave all the pages of virtual memory with physical memory pages (another side effect interesting is that creates the virtual machine is no longer a pagefile on the boot). If you REALLY have to set the affinity to the CPU/memory, memory affinity can be set by changing the settings of the VM, the tab "resources", select Advanced Memory, and you can configure NUMBER here. In addition, if you had already seen it, the processor affinity is configured in the tab "resources", under Advanced CPU.

  I highly recommend you challenge the seller and ask if reservations CPU are sufficient. The planner of UC is already aware NUMA. VCPUs how they ask, anyway? Unless they want to more than 8, it is unlikely to split the virtual machine.

• Existance co VM / memory settings

  I have a question about coexisting VMs and memory management.  I try VMWare server (2.0.1) on a Windows 2003 host.  I have three virtual computers in place, (A) Suse Linux with Nagios software, (B) Windows 2000 with Windows 2003 (C) and the BTS without anything installed (so far).  The server has 4 GB of memory assigned to the virtual machines A - 1, B - 128 MB, GB, C - 1 GB.  All these virtual machines are idle and only in the test phase.  I got the value C use 3 GB, and 2 GB of memory, but in both cases when VM C starts to work (start, run installations/updates) the host and all virtual machines would be grinds to a State not responding for several minutes.  When this happens, the gel to the top is due to the swap/paging memory.  My question is what should I be looking at and what guidelines should be followed to make the most of the system's memory without causing this problem.  With the current settings of memory, when only turn on/off any machine itself, or when you feed on A and B together no frost until occurs.

  I hope I got the details, feel free to ask for clarification.  Thank you for helping me to start learning of VMWare.

  I start low, in terms of allocation of memory for virtual machines and then increase as needed, i.e. If VMS are weakening memory as they see it from inside the virtual machine itself in the guest OS. There is no hard and fast rule because all the workloads are different. Also use only one procesor VMs unless absolutely necessary. Because you run three different OS, there will be little memory savings between them compared to if you all had the same OS. Note also the setting in the web console as to whether VMs must be performed in memory of the host available - see attached screen shot. If the memory is a bottleneck, try and reduce what you run both host and guests (or add memory). Make sure also that your discs are not the bottleneck, as is often the case on my production servers.

  Guy Leech

  VMware vExpert 2009

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• What are the steps to merge database files?

  Hello
  
  I have 23 files of data in a tablespace .i to merge those 23 data files in 4 or 5 data files. What are the steps to merge database files
  
  Published by: mithun 22 October 2011 23:29

  I have 23 files of data in a tablespace .i to merge those 23 data files in 4 or 5 data files. What are the steps to merge database files

  Create new tablespace with 4 or 5 files of data and use
  "alter table move tablespace new_tablespace;
  Once completed, drop the old_tablespace.