Message error "printer is not ready."

Similar Questions

• Epson TX600FW "printer is not ready."

  I just new Epson Stylus Office TX600FW. Have installed the disc that came with the device. Tried to test the printing, BUT get a small window titled 'Epson Printer Status Monitor 3 "with the message - 'printer is not ready to print'. And he adds "check all connections and make sure all devices are on." To cancel printing, click the [Cancel] button. "And it also shows"Ink levels"and ink icons that all seem to be grey, however, already installed new cartridges Epson genuine - that present as being full when checked in the Epson device information panel.

  Have also tried to reinstall the driver from the Epson site download - all still does not.

  Hi Dianne,

  This behavior can occur because of corrupt drivers, incompatible drivers, if the print spooler service is not started, because of problems with the printer and the printer, missing updates settings.

  What version of OS are you using?

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  Note: Try all the steps except the resolution of problems.

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• I have Photoshop elements 13.  I got a new printer Epson XP-960.  When I tried to print a photo I received a message: default printer could not be opened.  What now?

  I have Photoshop elements 13.  I got a new printer Epson XP-960.  When I tried to print a photo I received a message: default printer could not be opened.  What now?

  kareng44985000 wrote:

  I have Photoshop elements 13.  I got a new printer Epson XP-960.  When I tried to print a photo I received a message: default printer could not be opened.  What now?

  This is a known bug. Here's a tech note:

  Printing with Photoshop elements 13 errors

• HP 1022: my HP 1022 was working fine all of a sudden I get a message "your printer is not connected" HELP

  I have a Mac my HP 1022 was working fine all of a sudden I get a message "your printer is not connected" HELP

  check the Cable Connection, if you have another pc conect printer to it and check if everything is ok.

• HP7510 - message 'the printer is not connected.

  I am trying to print from my MacBook Air and iphone 4, but I get the message "the printer is not connected" unable to find the printer from the iphone and MacBook.  The printer is connected as I continue to check the connection.  My wifi is password protected. Could be the problem? Help, please.  The printer works without problems on a few days and then the days I get the message that I get now.  Help, please.

  This can be a router issue.  Restart your router by pulling its plug momentarily.

  What router are you using?

• Error: "printer does not" (105-100003)

  Original title: PRINTING from MY COMPUTER

  I INSTALLED A NEW KODAK PRINTER. HAD THEWIFI TO WORK, BUT IT WON'T PRINT FROM MY COMPUTER.

  I GET THE ERROR CODE:

  Error: "printer does not" (105-100003)

  WHAT I will DO, I DONOT UNDERSTAND DIRECTIONS

  Help me

  Kodak solution - error: "printer does not" (105-100003):
  http://support.en.kodak.co.UK/app/answers/detail/A_ID/37708/selected/true

  Try the printer Troubleshooter

  1. open the printer Troubleshooter by clicking the Start button

  2. then click on Control Panel

  3. in the find what box, type troubleshooting

  4. then click on troubleshooting

  5. under hardware and sound, click "use a printer.

  Solve printer problems in Windows:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• PROBLEMA: PHOTOMERGE NOT RUN! AND GET THIS ERROR MESSAGE: ERROR 22 WINDOWS NOT HAS DI A COSTRUTTORE LINEA 388 VAR W = NEW WINDOW (RES) PLEASE, IF POSSIBLE, HELP ME. THIS PROBLEM IS ONLY WITH WINDOWS 10!

  Adobe Photoshop version: 13.0.1 (13.0.1.3 20131024.r.34, 2013/10 / 24:21:00:00) x 64

  Operating system: Windows NT version: 6.2 Architettura di sistema: Famiglia CPU AMD:15, Modello:10, Stepping: 0 con MMX, SSE Intero, SSE FP, SSE2, SSE3

  Fisico processore Conteggio: 6 Velocità processore: 3214 MHz

  PROBLEMA: PHOTOMERGE NOT RUN! AND GET THIS ERROR MESSAGE: ERROR 22 WINDOWS NOT HAS DI A COSTRUTTORE LINEA 388 VAR W = WINDOW (RES) NEW

  PLEASE, IF POSSIBLE, HELP ME. THIS PROBLEM IS ONLY WITH WINDOWS 10!

  Hi biagiob,

  Seems that the operating system is obsolete.

  Photoshop CS6 has not been tested on Windows NT in accordance with this article: Photoshop system requirements

  Suggest you to see this link to the similar problem: Photoshop: Err: "window 22 has no constructor" (Win 7/64 bit)

  Kind regards

  Claes

• Error «Server is not ready, not launched browser»

  What happened several times my ADEP installations: the quick start server starts, it hangs for a while and finally fails with an error message "Server is not ready, the browser has not launched."

  

  Anyone know what could be the cause?  For now, I just start the quickstart jar into another directory, recreate the crx, download the samples, reactivate RDS., restore the SDK in the tooling and launch new projects.  This is obviously of a tedious workaround!

  Thanks in advance!

  I personally found dbl - clicking on the JAR file to be unreliable.  As Janice, you could create a simple batch file that looks like this and run it:

  off @echo

  java-jar adep-platform-quickstart-10-0-all-all.jar

  You can also get fancy with it, like this:

  off @echo

  Set JAVA_OPTS =-Server
  Set JAVA_OPTS = - XX: + UseParallelGC
  Set JAVA_OPTS = - XX: + UseParallelOldGC
  Set JAVA_OPTS = - XX:ParallelGCThreads = 2

  Set JAVA_OPTS = % JAVA_OPTS %-Xms1536m
  Set JAVA_OPTS = % JAVA_OPTS %-Xmx1536m

  Set JAVA_OPTS = % JAVA_OPTS % - XX: PermSize = 256 m
  Set JAVA_OPTS = % JAVA_OPTS % - XX: MaxPermSize = 256 m

  Java-jar adep-platform-quickstart-10-0-all-all.jar % JAVA_OPTS

• I can't open FF and get the message: error: one is not defined

  FF does not, even if in safe mode. Under FF, I get an error with the message box ' error: one is not defined ' error info is
  "Source File: http://www.google.com/extern_js/f/CgJlbhICdXMrMFo4ACwrMA44ACwrMBc4ACwrMDw4ACwrMFE4ACwrMFk4ACwrMAo4AEBdmgICcHMsKzAWOAAsKzAZOAAsKzAlOAAsKzAqOAAsKzArOAAsKzA1OAAsKzBAOAAsKzBBOAAsKzBNOAAsKzBOOAAsKzBTOAAsKzBUOAAsKzBfOAAsKzBjOAAsKzBpOAAsKzB0OAAsKzAdOAAsKzBcOAAsKzAYOAAsgAI8kAI2/BFKlF3L_Vtk.js
  Line: 333 "
  What is the solution?

  • "Clear the Cache": Firefox > Preferences > advanced > network > storage (Cache) offline: 'clear now '.
  • 'Delete Cookies' sites causing problems: Firefox > Preferences > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• drive not ready message "the drive is not ready for use check the a drive, etc.".

  as soon as I connect my camera to transfer the photo I get following message

  The drive is not ready for use: the door can be opened. Please check the a drive; and make sure that a disk is inserted and that the door is closed.

  I can't get rid of this meaasge if I have to cancel it reappears 10 seconds later it just won't close very boring

  Hello

  What is the number and the model of the computer?

  You have the computer floppy drive?

  Were there any changes made on the computer before the show?

  Follow the steps:

  Method 1:

  Remove all external devices connected to the computer such as printers, scanners and external USB hard drive and check if the problem persists.

  Method 2:

  Check the BIOS setting and also, I suggest you to update the BIOS. To update the BIOS, contact the manufacturer or the manufacturer of the access Web site.

  Note: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Get message that printer is not found.

  Original title: printer Installation

  I'm unable to install some of the features on my Dell 922 printer all-in-one.  I get the message that the printer is not found.  Everything is connected properly, as far as I can tell.  It will print and copy but not scan or fax.  Any suggestions?  Thank you

  Hello

  First uninstall all the software & driver associated with your system printer.
  Restart the system.
  then,
  The installation CD is provided by the manufacturer,
   
  Follow the step by step provided by them.
  Kind regards
  J Chambers

• When I started > run > ncpa.cpl I get message error "file does not have a program associated with it... »

  XP SP3 with ALL critical & almost all critics not updated.

  I'm trying to follow the instructions in MS Article 871122 OTF Windows to configure my wireless network settings.

  But when I try to... Start > run > ncpa.cpl I get message error "file doesn't have a program associated with it".

  Thank you

  Steve

  HDTV - calibration.com

  Ok.  That's what steps 1 and 2 of the instructions in KB 871122.  You are now up to step 3.

  Now we will solve the problem "file does not have a program associated with it".  Go tohttp://www.dougknox.com/xp/file_assoc.htm .  Read the explanatory text and then click the 5th from the top:CPL file Association Fix download the zip file, extract the reg file, then run it.

  Because this association should not have broken, I suggest that you download, update and run

  Malwarebytes Anti-Malware and

  SuperAntiSpyware

• Bluetooth not working do not error Bluetooth is not ready

  I have a Toshiba laptop, windows 7. Bluetooth no longer works at the time, the icon is red and when I try to add a new connection it gives the message "Bluetooth is not ready." I tried to uninstall the adapter USB Bluetooth devices Manager and look for material changes later, but the same problem persists. I checked if its update and it says it is.

  Moved from programs for Windows 7 Forum.

  Hello

  You did changes to the computer before the show?

  This problem occurs because of a problem in the PnP layer.

  I suggest you try the steps from the following link:

  Bluetooth devices do not work correctly on a computer that is running Windows 7
  http://support.Microsoft.com/kb/980396

  I hope this helps. Let us know if you have other problems with Windows in the future.

• I get an error, "Wimaxx is not ready" when I connect to the service provider.

  In my wimaxx connection utility, I get the message, "Wimaxx is not ready", and I can't connect to my ISP CLEAR. It won't let me change to 'on' in the window, it says off now. I ran the Device Manager and he tells me that everything is working properly. I also checked the edits and none are necessary. The wifi is turned off and the radio when I try to connect, but I have been able to connect to a wifi signal. I need my laptop for school, can anyone help.

  Original title: Wimaxx isn't ready, unable to connect

  Hi cfarner,

  Thanks for keeping us posted and share this information with us.

  Method-

  Try to uninstall and reinstall the application of Wimax. Check if this is useful.

  Do get back to us and let us know. We will be happy to help you.

  Thank you.

• Windows 8, the error message indicates printer does not print. It prints, but does not remove the queues

  I use Windows 8 Pro, 64-bit on a printer of a6700y Pavilion with a printer PhotoSmart 310. When I print, I get an error message saying that there is an error, and the document will not print. The document prints correctly, but will not remove the file in the print queue... I have to manually delete the file in the queue. Of course, it's a software problem. How can I solve this problem?

  Hi eri2198859,

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.
  
  I would like to know what are the errors you receive?
  
  http://www.HP.com/go/tools