Message 'Media pending' on CC 2015.13

Similar Questions

• questions - dvd has error message 'media Meanwhile' displayed

  with suite cs5.5.  I created the dvd in cs5.1 yet.  The dvd has been created and when he looks, there are 8 seconds where the error message 'media Meanwhile' are perceived.  The dvd continues to play as if nothing had happened.  The audio played very well, even during the display of error messages.  So I check the chronology of the creation, the 'media pending' error does not appear.   The scene is superb in the first. But now that it is transcoded in encore, it appears not in yet, but again, this is after it is transcoded.  So what happened?  The video is 2 hours long. I look for this error message that might occur at random is not going to happen.

  Angela

  Hi Angela,.

  The 'Media pending' message certainly looks like it's the chronology of the first, so there is no "error" with the current DVD or creation - still can only burn the content planned for it. Can be exported in again until all the clips in the first were made for example of loading. As Kevin says, export of first place. Use the file > export > Media and choose "MPEG-2 DVD' as FORMAT and choose a preset such as"NTSC DV Widescreen"or what is best for the video (we do not know your type of video source).

  This will create .wav and .m2v video, audio and all clips simply import the two 'chronology as"again, and author. Audio allows you to convert to Dolby AC-3, the video should not transcode. Note that the media must be able to adapt the DVD to avoid transcoding, so you will need to adjust the speed of TRANSMISSION before encoding according to the duration of the program. For 2 hours, set 4.5, VBR 2 pass recommended.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• Equium L10-300 - message "media test failure".

  Hello

  I'm asking on behalf of a friend. They recently, accidentally had a spill of liquid on the keyboard of their laptop Equium L10-300 which resulted in the message "media test failure" appearing on the screen and makes it so the laptop unusable. Apparently when the liquid was split open CD-ROM drive (coincidence?), while the player also "clicky" sounds when the case he pressed.

  Is their machine completely buggered now or maybe just the hard drive / liquid obtained in the drive? Are there recommendations for when such an incident occurs or just let it dry out and hope for the best?

  Thanks in advance

  Hello Michael

  The liquid spited in Notepad is the worst thing that can happen.

  > Is their machine completely buggered now or maybe just the hard drive / liquid obtained in the drive? Are there recommendations for when such an incident occurs or just let it dry out and hope for the best?

  Why hard drive? I fear that the defective mainborad may be responsible for this message (IDE controller). Boyfriend sorry but it is just a recommendation, contact the service and let check the laptop.

• Try to install Seagat Backip more. Error message says 'pending Reboot Validator'. MS Word is the only software I have. No music, no games, etc. Anyone got any ideas?

  Try to install the Seagate Plus backup.  Seagate is problem of Windows XP.  Error message says 'pending Reboot Validator'.  Seagate is Windows problem.  Nothing fancy about this PC.  No Nero, no games, no music, no video.  If anyone has any ideas on 'Reboot Validator'.  A lot of questions on Google about this.  But no answers.

  http://knowledge.Seagate.com/articles/en_US/FAQ/004319en

  have you followed these steps?

  your pc is up to date of Microsoft Updates?

  What is the model, model number and brand of pc you?

  What is your current antivirus?

• I have 2 laptops and one desktop. Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help. I use Windows XP

  I have 2 laptops and one desktop.  Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help.  I use Windows XP

  Hi JessaRoy,

  · The computer connected to the network or are they computer autonomous?

  · What is the number and the model of the computer?

  · What is the service pack installed don the computer?

  · What is the full error message with the error code, that's all?

  · What are the steps you tried to solve the problem?

  Try the steps from the link below: to test TCP/IP connections by using the ping and the commands net view: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/sag_tcpip_pro_pingconnect.mspx?mfr=true

  With regard to:

  Samhrutha G S - Microsoft technical support.

• Delay during playback when switching between sequences (media pending)

  Hello guys,.
  I am increasingly frustrated with first CC lately.

  I am so under CC on a desktop PC. Basic elements: Asus X - 79 Deluxe, Intel i7 4930 K, 32 GB ram, Geforce Titan.

  OS (Win 8.1) and CC are running on an SSD. Images is on internal 7200 RPM HHDs.

  All other software (for most Davinci and Red movies) work perfectly, fast, no crash what-so-ever. So I thought that the system worked very well. But the first is a nightmare and I'm trying to figure out where she can come.

  Some problems appeared recently on the latest version, and I have not in the past.

  First of all, I faced a huge problem when opening simply clips in the project window in the Source drive. I was usually a 30 seconds 'Media pending' every time. When you work with files 1000 +, it was simply impossible to work. Oddly enough, I found a trick: when the first clip of the opening, I have this question pending Media, but (this is where it gets funny), if I do not play the clip, just stay on the first image and opened a second immediately, then the second he wouldn't issue pending media. As long as I stayed on frame 1 of each clip, I could open the following without any problem. Then, once I browse these "open first" clip, they would play fine, without delay. But once again, if I went a little further and opened a new clip (not was previously opened), I have to go through 30 seconds of waiting media again. F * boring. But, I just had to open all the clips before you start editing, and then it would work.

  But now, I have a very similar problem when I edit more on. Especially if I have several sequences, whenever I have switch from one sequence to another, it would take several seconds before the video (on the drive program) would appear. Most of the time, the player stays black, but a few times, I got the screen media on hold again.

  Then, once these data are transmitted, the reading is in every sense. The most common problem is that the video playback, but if I press the stop, the stop of the cursor on the timeline (the UI reacts to what I do), but the video continues to play... and I can press stop like a maniac, he stops playing like 20 seconds later... The user interface reacts again, I can navigate the menus etc... but just video continues to play. I have to wait a few seconds before you can start working again.

  I tried a lot of things: change the images on another disk, updating video drivers. I suspect that it is related to a relatively new cause of the function, that I never had these problems on previous creations (the 2014.2 of the pre version). But now, I just missed the deadline of a client today because the program has been so slow. You can imagine that I feel a little stressed.
  Let me know if you've been through things like this before, or if you had an idea where it may come, I would greatly appreciate your help!

  Thank you very much!

  Cédric

  Hey guys, I just come to take stock of my situation in case it might help other people.
  I have found little to chance, but I started using CC to create my offline instead of RedCine-X files. It is not a perfect solution, because they has some options that I used in RCX I did not cc.
  But basically, what I did is:

  -import all original R3D files in first. If I try to import them directly into Media Encoder, it breaks down for some reason any. But in the first it works, you must go to your folder of images and looking for file 001.R3D (cause when the files are too big/long RED them divided in XXXX001. R3D, XXXX002. R3D and first few duplicates in deadlines, as well as the 001.R3D are useful)

  - then in the project window, I select all and export, which sends to the Media Encoder without crashing

  -a from there, I create exactly the same format that I used to do in RCX, so DNxHD 36 in a containing MXF.

  and for some reason any, once I have import in first CC, these files do not have the problems that the MXFs had when they came to RCX: no delay, no current media * etc...
  so for now it works...

• No video in the monitor of the program - WARNING "Media pending".

  I use first Pro CC v8.0 on Mac OS X Yosemite 10.10.1.  The last time that I had worked on this project, while I was still on Mac OS X Lion 10.7.5, I had no such problem.  Not sure if it's related to that or not.  In the right top box video, the display shows just "media pending."  I can click on the video bar itself and it is displayed in the upper medium video and plays.  I know that the files are linked.  Render as green in this sequence shows, but are red and yellow in another while having the same problems.

  Any ideas?

  Thank you

  Ron

  Post edited by: Kevin Monahan

  Reason: need a better title

  I finally found another discussion with a related issue.  They said that I have to cut my preferences, or something like that, but the simple solution was to copy the files on the timeline and paste them into a new sequence.  I did and it works in the new sequence.

• Media pending forever

  Just moved a drive to another computer and then plugged in just to get back on the computer on which he had been on, my Premiere Pro CC - one mac computer running Lion 10.7.5.

  When I open the project I had worked on, most times just say 'media pending '. Any ideas?

  Thank you

  Ron

  He did not move. Especially on delays, there is no images, but I was able to watch individual clips in the browser.

  I called Adobe tech support and (for the second time in a week), they were very helpful and took control of my machine. They did some magic by exporting then import XML of a sequence, and that seemed to connect again properly help files. He also allowed the media cache, which he recommended that do first if this happens again.

• 1 second media pending, random occur

  CS5 on Win7 64 bit, 6.4 GB of RAM reserved for CS5, Quad Core 2.4, all the data on the internal HDD, all Cachefiles and other data in Projectfolders.

  1440 x 1080 (1.3333) project, 25 fps, PAL, 48000 Hz, 1.5hours duration, 69 different objects, the largest GB 9.2, m2ts, mp3, wav, mpeg

  I exported the movie with CS5 Mediaencoder in PAL, 1280 x 720, 25 frames per second, quality 4.0, MPEG, 384Kbit/s, 48 kHz, 16 bit, stereo, VBR, 1-pass, min. 4.00, but 10.00, Max 18.50 Mbps

  Randomly 'Media pending' appears for one second in the exported file is perfect apart from that. They do not appear in the editor first however. The preview has never media waiting screens.

  I discovered, however, they appear especially when he jumps a small object for large items. I used 4 cameras which was on a tripod to record line in the Strait and the scene from above. so, if I use one of the other cameras to cover the part where "Media pending" occurs, then it gets only moved up to the point where I stopped that covers it, but once again only for a second, even if it is the same object later.

  solutions anyone?

  Philipp

  Here's a note from the release notes for the 5.0.3 update:

  "Correction of problems with indexing of MPEG files, including the user interface is unresponsive during indexing and some unnecessary cases of reindexing media shared on a network."

• error message: Media Player is not installed

  I tried Fix It online but I get always an error message my Media Player is not installed properly and I need to reinstall, how do I do this?

  original title: Media Player is not installed

  Uninstall first to:

  1 menu start > Control Panel > Add or Remove Programs.
  2. I assume you are using version 11, so look for and uninstall runtime 11 and 11.

  Download the latest version of Windows Media Player for XP (version 11) to:
  http://www.Microsoft.com/download/en/details.aspx?ID=8163

• Error message - Media Center had to close after you install the updates in the Windows XP computer.

  Original title: Media Center error and close message.

  I received a windows update last night and when I restarted my computer I got an error message that Media Center had to close. I sent error report, but the error message comes back upward. How fix the error or at least get rid of the error message?

  Hi PaulArnesen,

  Update that you installed before the problem?

  (a) that you try to run the system restore that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  (b) later, you can manually download the update from the Microsoft Download Center and install it.

  Hope the helps of information.

  Please post back and we do know.

• The xbox 360 Media Player no longer plays music after that I upgraded my CPU. Error message: media sharing service has been terminated

  Original title: the xbox 360 Media Player plays more music after I upgraded my CPU

  I have Vista 64 SP2.  The service runs for 5 seconds and then I get the message that she stopped. He was works well for years (my Xbox 360 sharing), I'm guessing he stopped a few weeks ago after I put in a slightly faster processor. I watched a some tech posted and tried to run the program which seeks the corrupted system files, but the only files that it could not pay had to do with the sidebar Windows. I have removed and put back my media extender, I thought that it worked because I've seen (from my xbox) miniature images, videos and music counting upward, as they have been added and I could see them. But if I take one he freezes for a few seconds and then says the media sharing service took end (or something like that). Then, I go to my PC and see that it stops. I can restart, but it only lasts for 5 to 10 seconds.

  I also say a post about deleting files in C:\Program Data\Microsoft\DRM, but I have all the files in there. Just a server folder empty.

  Hello

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. Click Start.
  (b) in the search box type eventvwr.msc, and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• Cannot fax in Win 7 - getting the message media is write protected

  I can't fax anything to Win 7 Professional. Whenever I click on send, I get a message that the media is write protected.  I have faxed successfully in the past. I tried to many different docs, that nothing does, not even a regular cover page. Can anyone suggest something to help?

  Hello

  Try these steps and see if that fixes the problem:

  Step 1:

  1. Click Start and type regedit into the search box start and press ENTER.
  2. navigate to the location
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fax
  3. in the right pane click "ArchiveFolder."
  4. check that content is "C:\ProgramData\Microsoft\WindowsNT\MSFax".
  5. If this isn't the case, then change it.

  IMPORTANT: This method contains steps that tell you how to modify the registry. However, serious problems can occur if you change the registry
  incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then, you can
  restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Step 2:
  a. go to start and type in windows fax and scan and press ENTER.
  b. in Windows Fax & Scan switch to Fax view (View menu > go > view Fax).
  c. in the Tools menu go to accounts of fax.
  d. Select your account and click on delete.
  e. now click on add and select Connect to a fax modem.
  f. leave the default name and click Next.
  g. choose an option, how to manage incoming faxes and then click ok.

  
  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• WIN 8 MESSAGE MEDIA CENTER

  I just got an email from: * e-mail address is removed from the privacy * "it's a reminder that you need to activate your free product key Windows 8 Media Center Pack * by 31 January 2013": I would like to know if it's a legitimate message from the Ms. I'm also surprised because I did not win 8 on my Pc thank you for any info.

  Hi, Luisfersd,

  Did you buy Windows 8?  Do you have the preview version installed at any time?

  The Pack Windows 8 Media Center is available free of charge for a limited time only through the promotional page on Windows.com. If you get the Windows 8 Media Center Pack through any other place, charges may apply. Offer valid from October 26, 2012, until January 31, 2013 and is limited to the key of a product by e-mail.

  Yes, a letter is sent with the product key for those who have purchased the upgrade.

• I get the message that adobe InDesign CC 2015 has stopped working. I updated and rebooted and still not be able to get.

  I get the message "Adobe InDesign CC 2015 has stopped working". I updated and rebooted and still impossible to get. Help me!

  Hello

  See the following topics:

  Adobe InDesign CC 2015 has stopped working

  Adobe indesign cc 2015 has stopped working

  Adobe Indesign CC (2015) has stopped working error

  Let us know if you need additional assistance.

  Kind regards

  Shelly