No video in the monitor of the program - WARNING "Media pending".

Similar Questions

• Problems with the 'start' button and the size of the video in the program monitor

  I was on TSF phone Adobe Help for about 3 1/2 hours today.  The problem is that the video in the program monitor doesn't fit - even when I checked it to 'fit '.  I have a mac - totally up top date, and film imported from my canon 7 d, I turned to 1280 x 720.  When I created a new project with the same, the image in the program monitor is too big.  When I create a new project in 1280 X 1080 image is too small - even when I click on 'adjust '.  Also, sometimes the play button doesn't work everything simply.  Help, they managed to get rid of my twice - preferences to no help at all, "clean up" my hard drive and the problems still continue.  They then tell me in order for me to go to the second layer, I want to buy a contract.  Can someone help me! Lose my mind! Thank you.

  What's happened is that you have created a sequence with the wrong settings.  Right-click has created a sequence with the correct settings.

  Adobe-forums http://blogs.adobe.com/kevinmonahan/2013/09/11/Marking-Posts-As-correct-or-helpful-on-the-/

• Premiere Pro CC 2014 - no video in the program - black screen monitor

  I opened a project where I had worked the day before to find that my .mov and .mts files will not appear in the program monitor. This seems to be limited to this first project as another project, I am train very well.

  Reading seems correct, I get audio, I can see a pdf file that I have the chronology as lower thirds but not video clips. I tried to change to Mac video drivers, switching to only software acceleration, etc., without success.

  First Pro CC 2014.2 V8.1 caravan

  Processor 2 x 2.4 GHz 6 - Core Intel Xeon

  16 GB 1333 MHz DDR3 ECC memory

  NVIDIA GeForce GTX 680 2048 MB graphics

  Driver: 334.01.03f02

  CUDA driver version: 6.5.45

  Software OS X 10.9.5

  

  If you turn off the track (click on the eyeball) to V3, you use the tracks underneath?

  MtD

• Cropping, resizing, moving video in the program monitor

  I have some videos of source that is bigger than the I'm in video editing.

  How hard is it to choose the section of this video that actually appears in the program monitor?

  I read something about Adobe Docs on a motion effect, that I can't find. Is that what I need?

  Go to the window > effect controls to reveal the effect controls panel. It must be that. Well, you can do without, but you do not want. The motion effect and all its parameters lives there.

• Problem with the size of the video in the program monitor.

  I just bought PPro CS4.  When I import video files that they arise and would go well in the source monitor, but in the program monitor, the video size is very small.  My computer meets all the system requirement and I installed Quicktime Player.  What could be the issue here?

  Yes, if you are in the North Ameraca, you should have source NTSC.  But in a previous post; You told us that your source clips were PAL.

  You cannot change an existing sequence seetings.  Create a new one and you will be able to set the correct preset.

• Video of the program different from the video source?

  Although I'm not really experienced or well informed at first, I used it for a few short films and other projects. I'm not sure why I'm having the issue I am. My video source is different from how it appears in my the program monitor.  I tried with different sizes of

  The video source is the program on the right and left. I tried to export the video and I couldn't make it too look like the video source. The exported file was either as video or zoomed in the program. The two ways are grainy. Sorry, if this is an easy solution. I'm having a hard time finding anything online that can help me.

  You have the wrong sequence settings.

  Learn Premiere Pro, get help and support. Adobe Premiere Pro CC

• When I try to go full screen-all while watching a video or the program, the screen becomes all white

  While watching a video and I click on full screen my screen turns white - I can still hear the program, but no image... Please make suggestions in terms that even a 3 years could understand - this is my level of ability of the computer... Thank you.. .JB

  This has happened

  Each time Firefox opened

  == looking extreme Insider glennbeck about 10 months ago

• The program Pro first monitor goes black very frequently

  I had a few problems with Premiere Pro because I upgraded to El Capitan last year, but the biggest problem has been the program monitor goes black while editing.

  It can happen at any time after the seemingly any task. Once it goes black, the only way to solve this seems to be to quit the application and reopen it. I can always perform any task I want, and you can still hear the audio on playback and washing, but I don't see all the video of the program.

  Sometimes I can perform an action until it goes black again, sometimes it may take a few minutes.

  I had recently replaced logic board and have installed the latest update of Premiere Pro, but the problem is only getting worse. Today, the software was virtually unusable.

  Data sheet:

  Premiere Pro CC 2015, build 10.3.0 (202)

  MacBook Pro (retina, 15 inches, end 2013) (recently had map logical and retina display, replaced by Apple)

  El Capitan 10.11.5 OSX

  Processor 2.6 GHz Intel Core i7

  Memory 16 GB 1600 MHz DDR3

  Graphics Intel Pro Iris 1536 MB

  Seems to be common, but perhaps for different reasons, depending on your configuration. These discussions could help:

  Re: The program monitor will randomly black

  The program monitor keeps going black in first Pro CC

• Cannot run microsoft outlook; message says use Inbox Repair tool (scanpst.exe) how can I do? In addition, how to restore windows media player; the program name is missing from the selection list.

  Message says:

  C:\users\deaconmike\appdata\local\MicrosoftOutlook\Outlook.pst

  Quit Outlook and all mail inabled applications, then use the repair tool Inbox (scanpst.exe) to diagnose and repair errors in the file.  For more informaion about the Inbox Repair tool, see Help.

  Hello

  1. from which the program (Windows Media Player) selection list is missing?
  2 have you checked in the Windows features?

  I suggest that you follow the steps mentioned below.

  Step 1:

  Check if Windows Media Player is disabled in Windows Features.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-features-on-or-off

  Step 2:

  I suggest that you run SFC scan on your machine to verify if this is related to missing or damaged system files.

  As regarding problems with Outlook, I you should post the question in the forums of Outlook.

• The program monitor has yellow cast and red vertical lines when the video is paused

  The program monitor yellow cast and red vertical lines when the video is paused, I'm not reading. I'm not on external or monitor.

  Thank you!!!   works now! If all goes well there will be an update soon.

• The program monitor empty composite video.

  2 x 2.26 Ghz Quad Core Intel Xeon

  16 GB of DDr3 memory

  2011 mac Pro

  DeckLink Studio 4 k audio and video output running at the receiver and external controller

  NVIDIA 5770

  Graphics NVIDIA Quadro 4000 card

  The program monitor is empty. I've got audio of counting. I can get staff to record the signal, but in composite video, nothing comes through. The video and audio signals are through my card of cause on an external monitor and speakers, but the program monitor is just empty.

  I tried restarting the computer and the creation. Check the updates of drivers Cuda. 6.1.18 running

  Already old version 6.5.14 but the problem persists.

  Tried to create a new project.

  I tried different video settings for the sequence, but all behaving the same way.

  I can't video playback in my UI for the source or video monitor.

  Help, please.

  Contacted support via chat. Is that the rendering engine has been set to OpenCL rather than Cuda. To do this, go to 'file/project settings/general' at the top of this is the rendering engine of access. If it isn't on Cuda and you Cuda, then you will not have playback. Problem solved. I feel stupid, but there is the answer if someone else needs.

• No video in the Source or the monitor with PremierePro 2014 update program

  Since the update from yesterday, I now have video now in my source or program monitor. Reads the audio. When I insert a clip from the source monitor bin, I can see previous/exit points. The strange thing is that I can see the reading on my external screen, but not in the software. I tried to reset preferences with no luck.

  Apple OSX 10.9.5, 32 GB of RAM

  AJA Kona convince

  Adobe Premiere Pro 20141 (8.0.1 build)

  How can I fix?

  Customer Care Chat helped solve the problem.

  Had the Mercury playback engine to software only. I had to also off connection/re-edit some audio files that were not reading in the timeline panel.

  There was also a lot of permissions that had to be repaired.

• No video showing in the program monitor

  I ran recently in a strange bug where no video does appear in the program of my first CC (latest version) monitor when scrubbing through the timeline. Hit the SPACEBAR to play / have also no effect. no time code runs, the scrubber moves not, nothing at all. This is a screen recording of what I see.

  I tried deleting prefs, cleaning hide caches, deleted entirely, and I even tried the awesome tools more at digital Rebellion to see if it would help to get things to work - nothing helped. Just as a tip: when you open the same project of the same disc on a different machine, the same thing that is happening - so I have at least reduced to something inside the project folder. (??)

  Also, when I try and save the project to stop out first to try troubleshooting, first DC crashes, and I end up having to force quit the application. After that, I see a file named project strangely pop up next to my original project file.

  Someone at - it other ideas on how to troubleshoot and resolve this problem? I searched these forums, google, etc., but have not been able to find someone with a similar problem. Thanks in advance!

  It is a puzzle game.

  What are the effects you use? In particular, are third-party plug-ins in game?

  By chance, the two computers do not have the same model of graphics card and the driver? If Yes, then the first thing to do is see if a new driver is available.

  If they have different graphics cards or drivers, so here are a few things I'd like to try:

  1. A copy of the sequence, select all track items and remove the effects.
  2. The red bar over the timeline given, try to make at least a segment of it.
  3. Create a new project and import the sequence problem of existing project.

• The program Monitor stops the video play list

  Hello

  I lose the composite image of video playback in the program monitor and the Source monitor after a few minutes. Audio is not yet.

  While the video plays, a random video color video screens near bar overall top 10 lines of pixels from the left edge to the right edge, then the video freezes on video, but you can still listen to. After awhile, an error message appears and the first to be forced closed. "NVIDIA OpenGL driver detected a problem with the display driver and can not continue." Error code: 3'

  It happens on all projects ranging from different resolutions and sizs from 30 seconds to 40 minutes. I suspect it has something to do with this error of the video and pilots communicate do not, but something causes of creation to arrive after the clip, played some time to display. I tried a few online solutions, others have had success with, but it doesn't have a lot of solutions fully documented for Windows users.

  This put all my projects on hold. Any ideas on how to solve this problem?

  Other clues:

  able to see reading through the other display modes such as waveform, vectorscope or rc

  be able to see the video images to change if manually move the playhead to blue

  Windows Media Player plays video files very well

  Closing the first to reopen the first time very well for a few minutes

  -----

  APPLICATION SETTINGS-

  Adobe Premiere Pro CS 5.5 (5.5.2)

  "Scratch disks": using separate SATA HDD

  Player settings: default player - adobe reader

  playback settings-

  The TV format conversion: software

  play and pause resolution: 1/2

  Displays the first field

  Project example settings-

  sequence parameters: pixel square AVCHD 1080i, 1920 x 1080 16:9 30 fps offset

  Video: I-Frame only MPEG

  Codec: MPEG I-Frame

  Frame rate: 29.97

  DETAILS OF THE SYSTEM-

  OS: Windows 7 Pro 64-bit

  RAM: 12.0 GB

  Memory RAM used (Task Manager): 3.8 GB/12

  Desktop theme: classic Windows (disabled aero)

  Intel Core i7 920 2.67GHz

  NVidia Quadro FX 3800, 1 GB GDDR3, pilot: 9.18.13.697

  3D disabled, allow material dealing with disabled, software to manage color settings, 60 Hz

  Screen: Asus VG278 native 1920 x 1080, using 60 Hz

  Display driver: generic PnP monitor (there is no real drivers for this monitor from the MFG)

  Card motherboard BIOS: no integrated graphics chip

  UPDATE:

  A day later, Nvidia released a new driver updated 03/05/2013.

  I now get a success rate of 100% of the program monitor reading, even on projects that had a few preliminary questions.

  Clean the pilot installation option / default settings

  Version of the driver (from NVidia Control Panel): 320,00 (03/05/2013)

  Version of the driver (from maps Windows display properties): 9.18.13.2000 4/18/2013

  That will do it!

• The program monitor is black, no video after installing the new card chart

  I bought a graphics card PNY Nvidia Quadro 2000 a few days ago, and since that it is been installed, I was unable to watch videos in my program, the source or the same reference monitor.

  Similarly, if I designate one of my monitors soley for video playback, the screen is all black, and as the timecode to advance my calendar I only hear.

  My project is using "The Mercury Playback Engine GPU acceleration" for first Pro CS6.0.1

  I went to use a graphics card with two graphics cards and installed a third-party monitor. I spent these days around trying everything I could think of, I even uninstalled and reinstalled the first.

  Hardware specifications:

  Windows 7 ultimate (64 bit)

  HP Pavilion h8-1230z

  AMD-FX8150 Ghz 8 core processesor 3.59

  16 GB OF RAM

  PS 600W

  EVGA Nvidia GeForce GTX 550Ti

  PNY Nvidia Quadro 2000

  I use a PCI x 16 for the Quadro 2000

  I use a PCI x 1 adapter w / x 1 - x 16 slot for the 550Ti

  Could be the problem?

  More information

  Vectorscope, all scopes, YC - waveform Display modes all work.

  I downloaded the latest Nvidia drivers for both of my cards.

  I did not receive messages error or had problems in After Effects CS6, as video playback works fine in my other adobe applications.

  Since you have very recently purchased the Quadro, try to return it and replace it with a nVidia GTX 670. Approximately equal to the price, but the GTX 670 is much faster and it supports up to 4 monitors, so you can remove the Ti 550 and sell.

  I guess your problem is configuring dual video card that use different drivers. Double video cards is possible, even if PR can use the main map, but drivers must be the same for both cards and this is not the case.