Message notification is not displayed after you read the message and minimizing Skype for the next 5 minutes

Similar Questions

• Data only is not displayed after you refresh the page

  Hi all.
  
  Connect with a user who has a certain responsibility associated with an org_id (82), but there is also an org_id (81) set as default at the site level.
  We have a page with an AttachmentTable that is used for the contracts.
  In this page, we have a function that updates some attachments (because a contract template has been changed) using a simultaneous process associated with BI Publisher.
  
  After this function has updated on attachments, to display the results in the AttachmentTable, I do the following in CO:
  pageContext.setForwardURLToCurrentPage (URLparam, false,
  OAWebBeanConstants.ADD_BREAD_CRUMB_NO,
  OAWebBeanConstants.IGNORE_MESSAGES);
  
  I read somewhere, refreshing the page that the retainAM must be set to false.
  When I refresh the current page to see the accessory updated in the layout of the AttachmentTable, I see the layout without any data, because I noticed the retainAM = false in the method cleans up any context and value org_id is lost (I have my VO profile the org_id value to filter my query).
  
  Note that this medication works very well when I connect with the same org_id (by the responsibility) of the value of the default site.
  Data loss occurs when I use an org_id which is not the same thing to the value of the default site.
  
  If I use retainAM = true, I don't see the attachment of the update.
  
  Do you have advice to help me to refresh the page (and AttachmentTable)?
  
  Thank you
  Concerning
  Vincenzo
  
  Published by: Vincenzo on 14.18 5 - it is a-2010
  
  Published by: Vincenzo on 14.19 5 - it is a-2010
  
  Published by: Vincenzo on 14.20 5 - it is a-2010

  Hi Vincenzo

  If I'm gettting it correct then you want to run the query based on the current ORG ID... IF this is the case then instead of use the VO query with this where clause

  WHERE XxfwContractEO.ORG_ID = fnd_profile.value ('ORG_ID')

  Please use

  WHERE XxfwContractEO.ORG_ID = :1
  

  & then when running the original Version, you can setWhereClauseParam to set the binding parameter.
  Please note: you can get the id of the help org pageContext.getOrgId ();

  Thank you
  AJ

• print DigitalPersona finger scanning does not work after you install the recommended updates

  My impression of digitalpersona finger scanning does not work after you install the updates recommended on my dell Vista

  Hello

  1. do you have an error message?
  2. are you referring to the print scan hardware or software scan print that was supplied with the device?

  Method 1:
  I suggest you to update the software DigitalPersona from the link below https://www.digitalpersona.com/support/downloads/

• Why the highlighting of text in a PDF document does not work after you save the file

  Why the highlighting of text in a PDF document does not work after you save the file

  What application you use to highlight?

• The browser does not start after you have turned off and turned on the computer

  The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

  Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

  Thank you

• Acer toggle display does not display when you use the Fn + F5 key secret on my Acer Aspire 5560

  What it does:

  When you use the Fn + F5 key combination on my Acer Aspire 5560, it brings up a screen changes on the laptop screen for the selection of an external monitor, I am currently using Windows 7 Ulitmate

  Before the problem:

  Display mode switch Acer existed prior to the upgrades of the drivers

  The problem:

  The toggle screen Acer does not display when you use the Fn + F5 key secret on my Acer Aspire 5560?

  Additon Information needed to solve the problem or any other information:

  I would like to know what driver or software operates the Acer toggle display Mode?

  Also where can I find this driver for computer: Acer Aspire 5560 to bring this Acer toggle display Mode function?

  Acer Toggle display Mode: this is a picture of it when you use the Fn + F5 combination:

  

  Thank you very much Ironfly Ace, it has worked Acer hero of the day

• Why my virus program esetnod 32 guard tell me that my system is not updated after you install the update of all the nessary?

  Why my virus program esetnod 32 guard tell me that my system is not updated after you install the update of all the nessary?

  I have download all necessary Windows 7 updates, but they are not installed. Can anyone help?

  Kind regards

  Mitch

  Hi Mitchell,

  Please uninstall and reinstall the ESET program and check if it solves the problem:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  For further assistance:

  ESET knowledge base

  http://KB.eset.com/esetkb/index?page=home&locale=en_US&option=None

  Please post us with the result.

• the mouse movement is not displayed when you preview the project and after publication

  I missed a step when you change a demo of simulation? Here's the problem:

  When I edit in the timeline of a slide, I can move the appearance of the mouse movement and change the length of its duration; I can click on "show/hide elements" for the mouse, the text caption and select box to show or hide in the slide.

  All the changes reflect in preview > play Slide. But in preview > project or preview > in the browser or publish it to any format, except for the presence has changed and the duration of the movement of the mouse shows, others seem out of my control: 1) no mouse movement; (2) the pointer still displays its final position on the slide since the beginning of the slide; (3) the hidden nail box appears.

  That's happened?

  I come off some defect? Where is it?

  Thank you!

  Your question is not quite clear to me, but this sentence "I can click on" show/hide elements "for the mouse, the text caption and select box to show or hide the slide." is ring a Bell! Have you used the "eye" icon in the timeline panel to "hide" the objects? That is not intended to hide the version published, only to temporarily hide for editing purposes, have has too many objects on the slide. If you really want to hide an object permanently, so it does not appear after the publication or during a preview (play Slide is not a preview, is also only for editing, synchronization) you must use the 'other' "eye" icon you will find at the top left of the properties of this object Panel. Quite confusing to have twice the same button to completely different purpose (there is even a third version in Drag Drop & who still has another feature, just hide the links in the D & D).

• Qosmio G50 - 12 q - Vista does not load after you connect the external USB keyboard

  I could acquire an enermax acrilux usb keyboard and have connected the keyboard taken 12 q at the same level where another keyboard was attacked the qosmio g50 usb and it worked without problem.

  After to start the PC with keyboard eneramx connected the qosmio has not loaded windows vista Ultimate edition and the inside wheels have been activated.
  Never happened before. I doubted the enermax

  Reconnected to the position of the qosmio USB, there on the back not granted to start-up of turbines problems
  As the enermax, that he has never blocked the startup of the operating system and to activate turbines also have plugged into the same USB port to which priority was connected a keyboard?

  Tank you

  Hi mate

  Sorry, but you message I am really hard to understand
  What I understand is that you connected an external keyboard on the Qosmio and now the laptop will not boot properly. Is this good?

  What to say; Maybe you disable USB legacy mode in the BIOS.
  Please check this!
  To enter the BIOS press F2 and everything by turning on the laptop.

• I have a problem with the computer work is not correctly after you install the KB2753842 update.

  This update of windows has been installed automatically today (22/12/2012) as the (successful with this date) shows on the Page update.  Since that it has been installed, the computer is constantly read/write on the disc at 100% at all times (i.e. non-stop).  Performance is significantly degraded.  I rebooted several times, whenever the system shows the updates are being configured on tap-dwon and commissioning.  I want to reinstall the update because I think that it was not successful, even if the display update Page shows successful installation.  When I try to find and remove the update under the Panel of control-> program and features-> Windows updates, this update is NOT displayed (latest updates are 13/12/2012).  How can I remove and reinstall this security update?  It is a BIG problem at the moment.  Computer is almost non-functional.  Thnx.

  Original title: update security for windows (KB2753842)

  Nirmal S, thank you.  System Restore did the trick.  I restored prior update checkpoint and then the system automatically re-installed the latest update (which is one I had a problem with).  Problem solved!  My computer working again 'normally '.

  Also, I learned a few new things about the updates and restorations, so...

  Bravo for Nirmal S!

  Kind regards...

• Automatic resizing of the pop-ups of sizing does not correctly after you convert the project RH9 RH10 until.  Any ideas?

  We went just at RH10 (upgrade came with the Adobe Technical Communication Suite 4 upgrade).  We have successfully converted four projects that had come from RH9 to RH10.  I think my only problem is that all my popups that have been configured to open it in the topic as "display in the sizing Auto popup" are open as if they were under "default page" (see image map screen below):

  

  We run IE9 and Windows 7 ops system browser.  These pop-up windows worked well and is size so that we can click out of them and go back to the main topic before we converted the project.  ANY IDEAS?

  P.S. I tried already to remove the option of automatic resizing of popup display, then by saving the topic, then change back and nothing happened.  I do not change my css or the master page that popups were assigned and that worked before the conversion.

  Thank you!!  I wonder if I'll have to redo any mapping of the image to each of the popups in order to get the autosizing popups to work.  Please notify.

  Post edited by: DNCopeland I discovered another employee who has already climbed to the RH10 could open the same project and see the pop-ups that open as automatically resized for her, not as a page by default the entire window because they are for me.

  Sorry to barge here, but I wanted to pass along my experience with this bug.

  I found this automatic resizing (or custom also) pop-ups in image maps have been works well in Rh9 and broken in Rh10 in the Topic Previewer (glasses icon) BUT NOT in the real WebHelp output.

  Yes, DHCopeland, are statement that you see in the viewer section, or have tried to generate and display in actual production?

  I always test if there is no improvement after installing 10.0.1 HR patch. So far, it seems that the patch does not address this bug. I'll try another machine.

  John Daigle

  Adobe Certified RoboHelp and Captivate instructor

  Evergreen, Colorado

  www.showmethedemo.com

• Web site does not load after you type the address and pressing the return key

  I just downloaded and installed Firefox for a second time. First, I imported my IE settings. The second time I did not import the settings. Both times, after that I have type an address in the address bar and press ENTER key nothing happens. I even tried the subject: config and nothing happens.

  If you are in a corporate network environment:

  20.0 Firefox has a problem with configurations where your Windows profile is stored on a server using a UNC path (for example, \\userdata\greg). Currently, there is a solution for this. A solution could be to choose a local folder for your own settings of Firefox, but that could not be authorized by your COMPUTER. Even if it's less safe, if you need emergency of Firefox, you could install Firefox 19.0.2. This article has a link under 'I still want downgrade': install an older version of Firefox.

  If you are in a home environment or the local settings folder, then please ignore the above.

• Start page does not update after you run the update

  Run the update, on shows 9.0.1 and up-to-date... but everytime I open the browser, it shows that I'm behind and that you need to update? I refreshed, etc... always won ' accepts that I'm updating

  If you use the www.google.com/firefox as homepage site that previous versions of Firefox 3 use as homepage you can ignore the message about not using the latest version of Firefox on this page.
  
  Google seems to keep this page.

  Google assumes that you are using an older version of Firefox if you still visit this site, and warns you that you are using an older version of Firefox and invites you to update.
  
  You can use a different page than the homepage as subject: House or www.google.com or www.google.com/ig (iGoogle).

• Re: Portege R500: controller button does not work after you install the update

  After you have installed the latest version of Toshiba Value added Package, the two buttons (toshiba assist, and backlight power) do not work properly: they open instead a window of Firefox.

  I guess there is something to configure in the section "Optimizing" Toshiba Assist.
  When I open the program "Toshiba buttons functions" (sorry for the puny, Spanish translation, it is called: "functions of Toshiba botones") all entries are empty and I have to enter the Url of the program supposed to turn off the backlight of the screen of my LCD...
  I have no idea where to find this executable.

  Can someone help me?

  Why you n t use the OS restore option?
  The operating system supports the option of system restore and this helps to put the system in the previous point.

  Check, maybe it helps to get the old version of the Toshiba Package Value added.

• Windows Vista does not start after you use the Hp Recovery Manager. What should I do?

  I used Recovery Manager to reinstall Windows Vista Basic 32-bit. During installation, it shows 0% completion although at the end it says everything is ok. After clicking on the button finish, he starts up the Recovery Manager again asking if I want to recover Windows. If I choose the Cancel button it restarts with the same Recovery Manager screen. What can I do?

  You can call HP technical support at 1-800-474-6836. Or you can give your product number, not the serial number, and I'll try to send you the link to order yourself.