Message PDR: Due to a protocol error

Similar Questions

• Remote Desktop - due to the protocol error detected at the client level (code 0 x 1104), this session will be disconnected

  Original title: Remote Desktop

  I get strange messages when trying to do Remote Desktop (and also connect using Logmein). Sometiems I get this:

  Due to the protocol error detected at the client level (code 0 x 1104), this session will be disconnected.
  Try to reconnect to the remote computer.

  Sometimes:

  Due to an error in data encryption, this session will end.
  Try to reconnect to the remote computer.

  For Logmein, I just get a mismatch. I'm running Windows 7 Pro sp1

  Can someone help here?

  Hi Peter,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  Windows 7 IT Pro category

• Section of remote desktop connection has been disconnected due to the protocol error

  I used Windows 7.

  I first run the Windows Firewall with advanced security. Then I run Remote Desktop connection. He began to load (as many times before) and then all of a sudden has generated a message from remote desktop connection "because of a protocol error, this section will be disconnected. Please try again from the remote computer"

  However, try as I might I was unable to connect more.

  I tried first in order to run the Windows Firewall with advanced security, then VNC Server nun, then on connection desktop remotely, but it does not work. Sometimes, I get a message that the remote desktop connection was busy. I turned off my PC, but did anyway.

  I'm doing something wrong? Could you please give me a hand? Thank you in advance.

  Irina

  Hi Irina,.

  Please contact Microsoft Community. The query you posted here would be better suited in the TechNet forum because the question is about Remote Desktop connection. You can post using the link below.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  I hope this helps.

• After a virus, I am unable to connect to the internet. Event log messages: the NetBios over TCP/IP service failed to start due to the following error...

  original title: NETBios TCPIP of missing in Device Manager

  I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7000

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The NetBios over TCP/IP service failed to start due to the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.

  Hi Diddy Dell,

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Error message at startup: "cssauth.exe instance cannot start due to an initialization error" and also unable to open help and the file

  Original title: cssauth.exe instance cannot start, help and Support of file disable

  Whenever I connect to my windows XP, it still says cssauth.exe instance cannot start due to an initialization error and I could not open my file help and suppot. Please help me. Thank you before

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. What is the brand and model of the computer?
  4. who help and support files are you referring to?
  5. what exactly happens when you try to open it? You get the error message?

  cssauth.exe is related to the Client Security Solution.

  Step 1: Try disabling startup cssauth.exe in the configuration of the system.

  Here's how:

  1. click on start > run.
  2. type msconfig and press ENTER.
  3. click on the Startup tab.
  4 locate cssauth.exe, and clear the check box for this.
  5 restart the computer and check for the issue.

  Step 2: If you still get the same error at startup then perform the clean boot on the computer.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  I would also ask you to contact the manufacturer of the computer because the problem is with the client security software that is provided by them.

• Email problem: Error 550 - 0x800CCC69 - Message rejected due to the reputation of the sender's IP

  Hello

  I have a problem running Outlook Express in WinXP SP3. I can receive but not send an email, I got the error next message when sending email:

  Error 550 - 0x800CCC69 - Message rejected due to the reputation of the IP of the sender (or words to that effect, at least)

  I have other messages on the forum the impression is that this error occurs usually when there is a suspicion that an e-mail account is used to send the spam, but I talked to our ISP and email provider (this does not relate to a Hotmail address) and they said that there is no problem from their point of view , and it must be something to do with OE. We also checked all the settings of the ISP account and everything is perfect.

  Can anyone offer any help?

  Thank you

  This error message comes from your ISP. They refuse to relay messages. Unless you are not connected to your ISP directly, IOW, sending another address through your ISP, they have blocked you.

  Remember their service tech and ask to speak to a technician level 2.

  P.S. When an error message in question, please copy and paste in your message. Wording right can make a difference.

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Error 'Message truncated due to size' for Smartphones blackBerry - Curve 9360

  I have a weird problem with my Curve 9360 which began this morning and I'm at the end of my mind on this one.

  INSTALLATION: I have email set up on my curve 3 addresses:

  • an address of BES (MS Exchange) for my work (works very well!),
  • a GMail account (works fine), and
  • an e-mail address POP3 my Internet/capable/TV service provider, advanced cable communications (that problem).

  PROBLEM: all addresses worked well until this morning when all electronic messages in my email POP3 address showed the same message ""Message truncated due to size" regardless of whether the email was large or small (no email has been more 500Ko) or if the message had a piece attached or not. "

  I tried my GMail and MS Exchange accounts, and they work fine.

  DIFFICULTY ATTEMPTED: firstly, I out the battery and reinserted it. It does not work.

  Second, I removed the account, rebooted my curve and then reinstalled the account. It does not work.

  Third, I've deleted the book of service associated with the email account, rebooted and re-registers the curve on the network. Which doesn't work anymore.

  Any email message that I receive on this address still shows the same error.

  I don't know what else to do at this point.  I did not any changes to the parameters of the curve.

  Any help on this curious problem will be appreciated.

  Thank you.

  What I read:

  http://supportforums.BlackBerry.com/T5/BlackBerry-torch/message-truncated-due-to-size/m-p/1349627

  ... it is a known rim issue and they are working to fix it.

  There is nothing you can do on your side... (other than calling your mobile operator and have the recorded problem and see if they give you ETA).

• Cannot open the file due to a header error Error Message.

  Hello

  If you're still trying to import an audio file (wav) in Adobe Premiere (or any other program) and get this error "Error Message.
  Cannot open the file due to a header error"

  Try to download this utility (found my copy Guide Fassoft Audio Converter of Tom.  I imported my wav file in the utility and then converted 'back' to another wav file in another folder.  And fixed it.

  There is a limit of 5 minutes on the trial version, but my audio file was less than 5 minutes, so it worked for me.

  I don't know that there are other similar utilities, so try any utility "Audio Converter" to see if it will fix your audio file.

  It worked for me.  Perhaps others have alternatives they would recommend.

  Rowby

  Hello

  I found a better (free!) utility to do this. (The free version of Fassoft Audio Converter has audio length limits).

  It is called MediaHuman Audio Converter and I found this site: http://www.mediahuman.com/audio-converter/welcome.html

  MediaHuman has worked on my windows 10 computer and does the work to 'fix' the question header error. Import the wav damaged and then exported to a new folder.

  Rowby

• Text illustrator and it me message of this Impossible manner the operation due to an unspecified error (SExi) fact, what to do?

  Text illustrator CC and it me message of this Impossible manner the operation due to an unspecified error (SExi) fact, what to do?

  I try to open Illustrator and I got this message: unable to launch illustrator because of an error indefine (SEsi)

  If possible. Please post a screenshot of the error,

  However, try steps below.

  (1) right click on the Finder icon and select 'Go - To Folder' option.
  (2) you will get a text box, type in the following command and then press the 'return '. (" Do not miss ~ symbol" "')

  ~/Library

  It will open the user's library folder.

  Inside, find the folder named preferences,

  Open it and trash files and Adobe Illustrator files.

  Then relaunch Illustrator app from the Applications folder.

• B2B-50081 duplicated Exchange Protocol error message

  Hello
  
  I tested a scenario for ebXML type of incoming traffic. for the first time, it worked correctly without error. I had created in my composite SOA instance. but the next time, even if I changed the name of the input file xml with the unique message id, I get the following error after the acknowledgment or between the acknowledgement of receipt.
  
  Please help me solve the problem.
  
  I appoint the input xml file as follows: < fromTradingPartner > _ < DocumentType > _ < revision > _ < msgType > _ < msgId > .xml
  
  For example: OracleServices_ebXMLType_204_1_210820128.xml
  
  Error
  
  ID 7F00000113948EE1E4B000002F2BA9C9
  Message Id 7F00000113948EE1E26000002F2BA9C5
  Refer to the Message to refer to the Message
  Type of the sender
  Sender value
  Type name of recipient
  Receiver MarketInc value
  Sender
  Receiver MarketInc
  The agreement ID
  Agreement
  Type of document
  Protocol document
  Version of the document
  REQ message type
  Direction of traffic ENTERING
  MSG_ERROR State
  Mode of recognition NO
  ASYNCHRONOUS response mode
  Send time stamp on 21/08/2012 16:55:28
  Receive time stamp on 21/08/2012 16:55:28
  Document Retry Interval (Channel) 0
  The document still Retry (Channel) 0
  Retry Interval (Agreement) document
  The document still Retry (Agreement)
  Native of Message size 0
  Translated Message size
  Name of the Action
  Name of Business Transaction
  XPath name1
  XPath Value1
  XPath Expression1
  XPath Name2
  XPath Value2
  XPath Expression2
  XPath Name3
  XPath Value3
  XPath Expression3
  Correlation of XPath name
  Correlation of the XPath value
  Correlation of XPath Expression
  Correlation with the name of XPath
  Correlation with the XPath value
  Correlation of XPath Expression
  The Message wire
  Application Message Message from the Application
  Payload, Payload storage
  Attachment attachment
  Label
  ID of the collaboration
  Collabration name
  Collabration Version
  Name of the Action
  Generic name HTTP protocol Exchange
  Exchange Protocol Version 1.1
  The exchange control number
  The group control number
  Transaction control number
  B2B-50081 error code
  Error Description Machine Info: (localhost) Description: duplicate Exchange Protocol error - Original B2BMessageId = 7F00000113948EE1D1B000002F2BA9BF
  ERROR_LEVEL_COLLABORATION error level
  Severity of the error
  Duplicated text exchange protocol error error message

  Saranya,

  How do you send the message to your B2B?

  2. created eBMS channel for TP remotely.

  Make sure that you do not offer same B2B here URL? It must contain the URL of your remote business partner (could be an another B2B).

  3 created channel of generic file for host TP

  Not required. If you just want to get the SOA message then not necessarily create any channel in tp host configuration. By default, messages will be sent to IP_IN_QUEUE and B2B adapter (configured with interface QA) will choose the message from here.

  Forum for soa is created with the error since it is impossible to convert to the opaque format.

  For opaque, no conversion is required. Simply affect the contents of payload into the output variable (JMS adapter input variable)

  Kind regards
  Anuj

• Failed to configure Acrobat to connect to LiveCycle RM due to the SSL protocol error

  I get the following error when I try and configure Acrobat to connect to the LiveCycle RM server.

  Unable to connect to the service at the: < host > https://: 443

  SSL protocol error.  Certificate is either not valid, or the common name or authority are not recognized. If the problem persists, contact an administrator.

  When I configure SSL on JBOSS, we used a certificate self-signed using the keytool JDK.  I can confirm that SSL is correctly configured on JBOSS.   Type < host > https://: 443 in a browser that brings me to the JBOSS page.  Also https:// < host >: 443/edc opens the user interface rights mgmt.

  This means, I won't be able to test without a real cert of a like Entrust certification authority?

  Also, what is the name of user and password in the settings menu?  Is a login in livecycle?  or for the cert?

  You must ensure that the host (443https://) is the same as the one you specified when you created the keystore. Do not use localhost.

  Jasmine

• Error 244: The DataFinder cannot start due to an internal error.

  I have LabVIEW 2010 and, during Windows startup, this error message appears:

  "The DataFinder cannot start due to an internal error.

  (244): Please wait until the National Instruments PSP Service is running and try to start the DataFinder or restart your computer. »

  I got this pop error during the past year it's a recurring thing. He began to show a few months after installing the LabVIEW program on my computer, so I'm not sure on what caused this message still appears. I find that it causes also a delay in the start of my computer - my other startup applications starting to show only when I close the error window. Help, please! Thank you.

  Hi xcontradictorx,

  Looks like National Instruments PSP server locator cannot be started. Could go you to the control panel > administrator tools > Services and locate the server National Instruments PSP Locator? Double-click it and make sure that the service is started. If this is the case, stop and start again (just by pressing the stop and start buttons). If this is not the case, run it, and then go in the Recovery tab and choose restart the Service as long as the action of first, second and more about chess.

  If after changing the settings for the PSP the issue to continue service I think that for some reason any PSP service will just be started late for some reason any. Could you do a quick real test: disable the DataFinder in msconfig, reboot, then run the C:\Program NIUninstaller Instruments\Shared\DataFinderDesktop\bin DataFinder.exe. This should place the MyDataFinder app in your taskbar (that looks like a yellow gear).

  If this is successful, then we will have to change the order of startup services such as the DataFinder begins just after the service of the PSP.

  Try the following:

  (1) locate the DataFinder entry from the registry. Located at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
  (2) remove the entry DataFinder
  (3) add a shortcut to DataFinder.exe in C:\Documents and Settings\All Users\Menu Menu\Programs\Startup
  (4) restart

  This should make all the standard Windows startup (as from services, etc.) and then launch the DataFinder.

  One question: do you use the DataFinder at all? Either with DIAdem or database search tool? If this isn't the case, you can try to remove it from the startup items. Simply go to start > run... and type "msconfig". Click the Startup tab, look for DataFinder and deselect. Click on apply. That will probably get rid of the error message.

• The calendar synchronization failure, protocol error: too many files. (4403)

  I don't think I have that much. I had to delete all my schedule last year, but now get this error:

  Failed synchronization schedule

  Protocol error: too many files. (4403)

  If anyone can help with suggestion?

  Thank you...

  Bill

  Hello

  If you have recent data on tungsten
  hotsync for handheld set replaces desktop

  or the opposite case
  together the hotsync on office replaces handheld

  then do a hotsync

  Message relates to: Palm TX

• Create an instance of the component with CLSID {0002DF01-0000-0000-C000-000000000046} COM IClassFactory failed due to the following error: 80004005.

  I have IE 9 installed on my machine. When I try to create objects of IE using SHDocVw. Its version is 6.1.7601.17514. When I run my windows service it runs fine but when I create an installer and then run, it displays the error message: creating an instance of the component with CLSID {0002DF01-0000-0000-C000-000000000046} COM IClassFactory failed due to the following error: 80004005.

  IE = new SHDocVw.InternetExplorer ();
  IE = new SHDocVw.InternetExplorer (true);

  I tried the two lines.

  Please give me a solution.

  Hi Patrick,

  The problem you are having is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the MSDN forums.

  Please post your question in the MSDN Forums.

  You can follow this link to ask your question:

  http://msdn.Microsoft.com/en-us/library/aa752084%28V=vs.85%29.aspx

  I hope this helps. If you have problems of Windows in the future, let us know and we would be happy to help you.

• How to repair the CLSID {830690FC-BF2F-47A6-AC2D-330BCB402664} failed due to the following error: 80040154.

  How I need to solve this problem? I didn't install on my desktop, no problem, but I install in my laptop this pop up when I run the software

  See the end of this message for details on the call
  just-in-time (JIT) debugging instead of this dialog box.

  The exception text *.
  System.Runtime.InteropServices.COMException (0 x 80040154): recovery of the class factory COM for component with CLSID {830690FC-BF2F-47A6-AC2D-330BCB402664} failed due to the following error: 80040154.
  at R2D2CtrlPanel.CSkypeMediator.ConnectToSkype)
  to R2D2CtrlPanel.CSkypeMediator... ctor()
  to R2D2CtrlPanel.R2D2Panel... ctor (img CImages, CRequiredVerifier & parent)
  at R2D2CtrlPanel.CRequiredVerifier.Timer_runOnce_Tick (Object sender, EventArgs e)
  to System.Windows.Forms.Timer.OnTick (ByVal e As EventArgs)
  at System.Windows.Forms.Timer.TimerNativeWindow.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Loading assemblies *.
  mscorlib
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5456 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
  ----------------------------------------
  R2D2CtrlPanel
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  CodeBase: file:///C:/Program%20Files%20(x86) R2D2CtrlPanel.exe
  ----------------------------------------
  Microsoft.VisualBasic
  Assembly version: 8.0.0.0
  Win32 Version: 8.0.50727.5420 (Win7SP1.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
  ----------------------------------------
  System
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5456 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5460 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  System.Drawing
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5462 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  System.Runtime.Remoting
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5420 (Win7SP1.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
  ----------------------------------------
  Interop.SKYPE4COMLib
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  CodeBase: file:///C:/Program%20Files%20(x86) /Interop.SKYPE4COMLib.DLL
  ----------------------------------------

  JIT debugging *.
  To enable just-in-time (JIT) debugging, the .config file for this
  application or computer (machine.config) must have the
  jitDebugging value set in the system.windows.forms section.
  The application must also be compiled with debugging
  permit.

  For example:

  
     
  

  When JIT debugging is enabled, an unhandled exception
  will be sent to the JIT debugger registered on the computer
  rather than be handled by this dialog box.

  Thank you

  Hello

  -When exactly you receive this error message?

  -What is the software you are trying to start?

  -Did you do changes on the computer before this problem?

  If the issue is with Visual Basic, it is better suited for the IT audience Pro on MSDN. Please ask your question in the MSDN Support Forum. You can follow the link to your question:

  http://social.msdn.Microsoft.com/forums/en-IE/vsexpressvb/threads

  Hope this information helps.