messages on the watch

Similar Questions

• Easier way to delete messages on the watch against one by one?

  How can I easily remove all text messages on my watch against one by one and having to tap the Trash button each time?

  Hello

  There is currently no other way to delete messages in the Messages on Apple Watch application.

  If you want Apple to consider adding a new feature to the application, you can suggest here:

  https://www.Apple.com/feedback/watch.html

• iMessage App on the watch crashing

  Hi all

  As I did the update of the WatchOS3, I am not able to respond to the messages of the watch. Whenever I try to answer with the emoji button, the crash of the App. If I use the storage mode, it takes at least 30 seconds to respond. Ditto for the tap button. It of really annoying, have almost ceased to use the application.

  Am I the only one?

  Thanks for your comments

  Beppe

  No problem for me. Have you tried to restart the watch.

• I get a message on my watch "Device locked" Unlock iPhone to start using Apple Watch "so I have the odd from my iPhone, now I can't pair it again.

  I get a message on my watch "Device locked" Unlock iPhone to start using Apple Watch "so I have the odd from my iPhone, now I can't pair it again.

  Hello

  Follow these steps to clear your locked watch and re-pair it with your iPhone:

  • Connect your watch to its charging cable - with power connected.
  • Hold down the side button until you see the cursor off the power.
  • Press firmly (IE more firmly than usual) on Power Off and then press erase content and settings.
  • Then re-pair your watch by using the app shows on your iPhone, choose restore backup when the possibility.

  More information:

  Set up your Apple Watch - Apple Support

  If you have forgotten the password for your Apple Watch - Apple Support

• How can I delete all text messages from my watch at the same time

  Can how I delete all messages at once on my Apple Watch?

  Hello

  It is not possible to delete all the messages in your Apple Watch at the same time.

  To delete messages:

  -On your watch, open messages (via the home screen, accessible via a simple press on the digital Crown) > when you view the list of conversation, by sweeping left on a conversation > tap Delete / Trash.

• How to delete messages from the Apple Watch

  I see that most of my older posts are still on my Apple Watch.

  These messages can be removed from the watch?

  Hi Ernie

  Delete the message is not synchronized on devices (and there is no way to enable this). Messages must on the contrary be deleted separately on each device (this is also how the app works through additional Apple devices, like a computer, iPad,...).

  To delete messages:

  -On your watch, open messages (via the home screen, accessible via a simple press on the digital Crown) > when you view the list of conversation, by sweeping left on a conversation > tap Delete / Trash.

• There is a backlog of old messages in the notification of iMessage Apple Watch

  How can I get rid of him?

  These are the messages that I have seen and read dozens of times now.

  Whenever I get a notification of iMessage on the watch, he rolls these old messages and shows me the real message again at the end. I don't want to see all those old messages in the notification.

  Can you help me? I could not find Google results for it.

  Stone

  Hi Pierre

  To clear all notifications at the same time, firmly press the screen when you view the list of notifications, and then press all clear.

  You can close the notifications individually as and when read you either by:

  -When you read one: scrolling to the bottom of the notification (when reading it) and pressing the button reject, or;

  -When you read one: drag down on the notification (from the upper section, if a notification that is longer than that of a playback screen), or;

  -In the list view, hit left swipe on an individual notification, then tapping on Clear.

• delete all messages at the same time on Watch

  Is there a way to delete all text messages on Apple Watch at the same time?

  Hello

  It is not currently possible.

  To delete messages: open messages > show conversations in the list view > swipe to the left on a conversation and press Delete / Trash to remove it.

  If you want Apple to consider the addition of an installation to remove all messages through a single action, you can suggest here:

  https://www.Apple.com/feedback/watch.html

• Screen times out when dictating TEXT messages to Apple Watch

  When I reply to a text message using the dictation (the option button of the microphone), the screen turns off after about 15-18 seconds.  When the screen turns off text message that I dictate to me is deleted and I have to start over.  I know that you can set the display to stay awake for 70 seconds instead of 15; However, I like it stay in 15 seconds normally but when dictate a message to stay so that I am always or at least allow me to wake up the watch by pressing and then continue to dictate where I left.

  Hello

  The screen must not sleep while a message is always driven (independent parameters of the screen to wake up).

  It can help to restart your iPhone and your watch. Close the two devices together, and then restart your iPhone first:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

  Otherwise, it can help to disable the twinning and re - pair your watch. The app shows on your iPhone takes a backup of your watch when unpairing via the app choose to backup restore when the possibility to put courses in place. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

  - Pairing your Apple Watch and Support Apple - iPhone

  - Set up your Apple Watch - Apple Support

• device not compatible for charging the watch

  I have had the watch for 2 weeks and the load on the same stand each night.  This morning, he had a message like "this device is not compatible to load the Apple Watch" - or words to that effect.

  I'm sure that when I put it on the stand last night I saw the charge icon will appear.

  I'm now at work using a different cable and it seems to load OK.

  Any advice?  I.e. no matter which way around the magnet is (side hollow to watch or away from the watch)?

  Hello

  The hollow side / concave as the head of the charger must be placed against the back of the watch.

• Dictation fails continually on my Apple Watch.  I tried to restart both the watch and my iPhone 5 and checked that the Seri is enabled on my phone.  Any suggestions?

  Dictation fails continually on my Apple Watch.  I tried to restart both the watch and my iPhone 5 and checked that the Seri is enabled on my phone.  Any suggestions?

  Hello

  Please specify the circumstances in which dictation is a failure.

  For example, what are you doing and what message error you see?

• No output message in the reminder of the event reminder register

  Hello world

  Nice day. I've created a diagram that uses the DLL of our client. I have a hard time to create because I am not no matter what background or experience this level of .expertise which involves DLL files. The DLL file is a type of Assembly code .net. The DLL file will be used for sending specific commands (i.e. read the Firmware Version, serial numbers, etc.) using a NFC (Sony S380) Player. It is the only means of communication about the product that is a digital watch. The problem is on the VI Ref callback, which implies a dialog box & a Message string for the property of 'DebugResponseReceived' node, there is no output, but the dialog box Message only gives me a message OK or info that I need to get. If I put a breakpoint to unbundle it by name "e", it gives a message in the property node power & the dialog box. both the Message property Node & dialog box have the same performance. Please see my Code.

  I'd appreciate your help.

  Thank you

  Leo

  A reminder cannot directly return values. You must use the user parameter of event reminder entry register to pass a reference to a queue, the user event or another way to pass data to a primary application. Research on this forum will be examples, for example here is one I posted years ago (note that screenshots are good, but attached the screws aren't; see further on the wire to correct those): http://forums.ni.com/t5/LabVIEW/How-to-interaction-with-Main-VI-from-Net-event-callback/m-p/1064515#...

• Display a message to the user w / result of data

  Howdy,

  First off it is a mission of the College work and it's especially complete; seeking advice and the experience here.  The mission is to create a calculator with many functions for each method of arithmetic.  It was easy enough, but the next step is to display a message to the user after each calculation.  For example, if the problem was 4 + 2, the message must be "the result of the addition is: 6. the creation of the part of the message by using the Msg to display the user-defined function is simple, but it is not exactly struck home.  I want to create a message that contains the result of the problem (for example 6).  As it is now I can't do that with the function of Msg, or if it is possible I can not quite understand.  I want to have a separate message for each function, but I don't know if I can incorporate the response into the message.  It's the underlying objective; How to integrate the response in a message dialog box to the user? If it is possible what should I watch?

  The VI himself is quite simple; case of structure for each arithmetic function and a certain time for execution loop.  X and there are entries and a drop-down list to select a structure if necessary. I've attached a screen below.

  Thank you

  

  THA

  You can use the Message to display to the user to view any string to the user. If the key is to use the palette of the chain to manipulate strings to get the error message.

  A subpalette of the palette of the chain is the range of number/String Conversion. This can help you get your (6) value into a string format and then you can concatenate that string however wished with the message.

  With the pop-up windows, you must make sure that you're not trigger this popup with every single loop, so make sure you put a case around the pop-up structure and place the logic in there to make it work only the case of popup when the value changes.

• When I look for a file in Win Explorer, I get a list of files in the search results. But some of the files seem to be missing. I get a message that the directory is not found when I try to open the search results.

  I wonder if what's on my hard drive and if what Win Explorer is on my hard drive are two different things.

  If I do a search in Win Explorer to "purple", I get a number of results.
  (To search for a file, I am in the word "Purple" in the search field in the upper right Win Explorer and pressing the "Enter" button).

  There are a couple of JPG files that I wonder about the search results.
  One example is called "purple_flowers.jpg".
  When I double-click this file in the search results to open it, my paint program opens and gives me a message that the directory is not found. If I use MS Paint to try and open it by double-clicking on the file and selecting "open with...". MS Paint", I get a message that the directory is not valid.

  The location of the directory on the error message is the blue 'Images' folder for my user. But, when I opened this file, I don't have a file with that name in this directory. The same thing happens with another JPG file, called "octopus.jpg" when I search the word 'Octopus '.

  Is this something messed up between what I have on my hard drive and think what Win Explorer is on my hard drive?
  How can I fix?
  Something must be reset in Win Explorer?

  I could have the JPG files with these names at the same time. I had a large library of images for a project, but I deleted it.
  (I tried to turn on the option to show hidden files in this directory, but that did not help).

  Imane:

  I thank very you much for that answer.
  But it seems to have stumbled on the solution:

  Strangely, this worked:

  (Maybe you know why).

  I moved the files in my blue images folder in another folder, delete the folder images blue, emptied the Recycle Bin and rebooted my computer.
   
  When my computer has finished its startup routines, my folder of photos blue was there! And he had the shortcut to the folder 'Sample Pictures' inside.
   
  When I searched "the Octopus" and "purple", I no longer saw these JPG files in the search results.
   
  I don't really know what happened, but I thought that after these results just in case someone else knows this.

  I'll read and watch in your information. I don't want to know more about what is happening in my computer.

  Marz

• Smartphones blackBerry how to remove an email 'saved' from your torch? (I'm constantly four new messages on the phone all the time and can't get rid of them!)

  Hi all

  I am somewhat a dufus and a few minutes ago has managed to highlight four emails (that I had intended to remove a small group), but managed to click on the "SAVE MESSAGE" by mistake. (Touch screens, bloody!)

  It has a small window saying "BACKUP MESSAGES", and since then, even if later I deleted the four emails, have a permanent icon red STAR on two of my email accounts, which indicates that there is a session of NEW MESSAGES waiting to be read - but are not everything.

  Also - at the top of the screen on the home page of the torch, in the same vein where the SOUNDS and the GLASS GROSSISSANT icon, I constantly for the symbol for 4 EMAILS sitting there, which usually only appears when there are actually four new e-mails waiting to be read. When I actually select the email icon, it only shows nothing - it's because there is NO NEW MESSAGES!

  Jeezzz... It was like him for 20 minutes, but he's really starting to annoy me! I did a power of battery pull reset hoping that it would open up when it re-initialized - but he didn't. The * beep * things me are still there watching. It seems that I have now deleted these four emails I've "saved", that I now can't access it to "possibly" the.

  Oh, and I do not use Exchange or something like that. I just got a bog standard torch, which simply reads a number of my POP email accounts Therefore, they are not saved on a Server Anywhere, as they were (at least 2 days) old emails that were downloaded on my computer for a long time and are no longer sitting on a server anyway - so God only knows where they have in fact been saved to.

  Help!

  HM.  Good, I don't save my messages, but let's try it.

  Open a folder of messages, press the BB menu button and select view folders.  There must be a folder for saved messages available.