Messages pushed to the specific handset has not received.

Similar Questions

• Make a backup of ASR, saved, but at the end of the record, I got this message: discovery of the ASR diskette has not been created.

  at the end of the recording, I got this message: discovery of the ASR diskette has not been created. You will not be able to restore an ASR backup without the system information stored on this disk. What does that mean? Should I save my data otherwise? I don't have a floppy drive (I'm surprised if someone does) but I have a dvd read/write cd drive... One last thing. When I looked at the content on the flash drive with program de-Frag it was lit, which means completely fragmented, the program recommended it de-fragment it... is this safe with a file of this size on a flash drive?

  Original title: Saving went well, but

  Windows XP is too old to do something other than a floppy drive.  If the automated system recovery disk is important to your backup and restore needs (HINT: YES it IS!) then get a USB floppy drive to create the ASR disk.  Or get a copy of most modern backup and restore program that works under XP and use modern media (USB, CD/DVD, keys etc.) to create a startup/recovery media.

• Installed Illustrator of the trial and has not received a serial number.

  Installed Illustrator of the trial and has not received a serial number. If I could get a that would be great.

  You will not receive a serial number until you purchase the software.

  Until then, you can use the free trial for 30 days. Then it stops working if you don't buy it.

• What should I do now? The license subsystem has not catastrophic

  I have cs3. When I try to open the program I get the error message that says: "the licensing subsystem has not catastrophic." You must reinstall or call customer service. "The said customer support there is no support for this product phone and chat told me that they cannot help with her either. ... So where should OK I go for support? all I want to do is to use illustrator.

  Hi Vroom567,

  In addition, you can consult the following help document.

  http://helpx.Adobe.com/Creative-Suite/KB/error-licensing-subsystem-failed-catastrophically .html

  Kind regards

  Sumit Singh

• C:\windows\ayofeworit.dll the specific module could not be found, the message pops up when loading office

  C:\windows\ayofeworit.dll the specific module could not be found, the message pops up when loading office

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you can't find a good explanation for the name of the file in a Google search, re chances while your system is currently or has been infected with malicious software.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• error message saying "error loading wingsw32.rom the specific module was not found" whenever I boot my system

  wingsw32. ROM

  I get an error saying "error loading wingsw32.rom the specific module is not found" whenever I boot my system.

  Can someone help me in this.

  Thanks in advance!

  ·                                You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform quick scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• Error message: there was a problem starting C:\Users\Trom\AppData\Local\Temp\toip0_tmp.exe the specific module could not be found.

  This message appears when I start my computer.  I think my pc has viruses/malware.  My antivirus firewall program wouldn't start / missing.  I gave my pc days back and managed to restart the firewall.  But I get the message... There was a problem starting C:\Users\Trom\AppData\Local\Temp\toip0_tmp.exe the specific module could not be found.

  To clean malware, take a look here and try what is below if you still have the problem.
  http://www.selectrealsecurity.com/malware-removal-Guide/

  Try this program because it will show you everything that tries to run at startup.

  Autoruns from Sysinternals

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

• I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  Date and me are dealt with by the network. Try restarting your router/modem...

  Verify that DNS is set to auto

  Make sure port 123 is open on the router (refer to the manual of the router to you)

• The message I get is Microsoft word has not been installed for the current user. Please run set up to install the application. I reinstalled the software, but get the same message.

  The message I get is Microsoft word has not been installed for the current user.   Please run set up to install the application.   I reinstalled the software, but get the same message.

  Hello
  
  See the methods listed in the articles below and check.
  You receive an error "Microsoft has not been installed for the current user" message when you try to start an Office 2003 program or an Office XP program for the first time
  http://support.Microsoft.com/kb/898512
   
  You receive a message "Microsoft has not been installed for the current user" when you start an Office XP program or start of Microsoft Office Maintenance mode
  http://support.Microsoft.com/kb/298022
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why do I get an error message saying "the specific module could not be found" when opening an image?

  original title: RunDLL

  I get the window followed whenever I click on an image or a file:

  There was a problem starting c:\Users\Jim\AppData\Local\Temp\seitybu\sxxqrbw\wow.dll that the specific module could not be found

  Can anyone advise on how to fix?

  Hi Jim,.

  I suggest you to navigate to the location of the file in the error message and check if it doesn't matter what suspicious file is present. There could be opportunities that your antivirus software would have deleted a few infected file, but would have left a few remnants, which is the origin of the problem.

  I suggest you use Microsoft safety scanner and look for viruses in your computer.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software. Here is the link to launch the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Warning: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Let us know the State of the question, so that we can help you.

• Receiving the message: a clock interrupt has not received on a secondary processor within the allotted time interval. What is the problem?

  My computer goes to blue screen and gives the message above and also said STOP: 0 X 00000101 (0 X 0000000000000031, 0 x 0000000000000000, 0XFFFFF88003163180, 0 X 00000000000000002) of physical memory on the drive of Dumping:

  First says Windows has been shut down to avoid damage.  A clock to interrupt not received on a secondary processor in the allotted time interval.

  Happens if my home screen appears and automatically plays a commercial or video file or if I try to play a video of Facebook, YouTube or my email etc.

  My computer is a Lenovo Z560.  He has done since the day that I brought home from the store.
  I should take that back when I bought first, but did not. I got this computer more than a year.

  Thank you.
  

  Hello

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error.

  Control bug 0 x 101: CLOCK_WATCHDOG_TIMEOUT-This indicates that an interruption of clock expected on a secondary processor in a multiprocessor system, has not received in the allotted interval.

  http://msdn.Microsoft.com/en-us/library/ff557211%28VS.85%29.aspx

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I suggest you to download the minidump files so that the experts here can analyze the cause of the error on a blue screen.

  Try using this link to download pictures and files on SkyDrive.

  Download pictures and files:

  http://Windows.Microsoft.com/en-in/SkyDrive/add-photos-files-FAQ

  Please post back with the State of the question.

• I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found." Can help you!

  Original title: cannot find awuvomas.dll

  I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found."  Can help you!

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• c:\windows\eqixoxiwakev.dll the specific module could not be found

  Error message when starting windows xp: c:\windows\eqixoxiwakev.dll the specific module could not be found. Can anyone help? Thank you.

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• There was a problem starting msiihy32.dll that the specific module could not be found?

  When I start my computer, I got this message there is a problem starting msiihy32.dll the specific module could not be found, and I downloaded the msiihy32.dll, but still have the message so what can I do?

  Hello

  Where did you downloaded it go?

  Google has little information about this file, so it's probably a Malware startup more entry left which has been removed from your security programs.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after scanning, take these startup entries:

  «How to use MSCONFIG in Windows 7»

  http://netsquirrel.com/Msconfig/msconfig_win7.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• The requested itinerary has not been mapped in Spark

  If I try to go to some Web sites, for example http://www.rtlnieuws.nl/ I get this message
  The requested itinerary has not been mapped in Spark.
  If I use Chrome I don't have this problem

  I solved the problem by cleaning the mind hidden CC cleaner