Metadata of Geotag lost after the publication on Flickr

Similar Questions

• After the publication of video in Movie Maker, it has a large green block down and extends the video

  I used a video camera to make a video and down it loaded on my computer.  Director of Windows wouldn't let me not download it from there, I guess that he could not read, so I converted it on AVS video converter 7.1 for mp4, which was unreadable on windows movie maker.  I then converted it to an avi and easily, he was transferred.  My problem is now, after the publication of the final draft of the film, he shows a huge green block at the bottom of the video and stretches horizontally on video.  This is not displayed when you edit the movie in windows movie maker, please help.

  Hello

  Since you used the 3 part video conversion software, we have no way of knowing what has occurred with the video. The only thing we can suggest is to follow the instructions in the following articles using the original video recorded and imported into Movie Maker:

  http://Windows.Microsoft.com/en-us/Windows7/make-a-movie-in-four-simple-steps

  http://support.Microsoft.com/kb/930435

• Fonts Typekit works is not after the publication of leading edge project

  Hi, I added the myriad of Typekit project edge lead and after the application of the police, that it looks great and even when I 'see in the browser' it works fine.

  My problem is after the publication, the default font its additional substitution (Serif-Sans) fonts in all browsers.

  Am I missing a step in the publishing process?

  Hi Nathan,

  Sorry for the delay to return to you; I see your response Friday. Done cover license fonts Typekit using web fonts in banners that will be placed on the websites of third parties, but the domain name should be listed on your kit you found. When the Typekit JavaScript runs in the browser, it checks the referer browser against the field on the kit. If the domain name in the referer matches your kit, the font files are not loaded.

  If you know the domain name of the place or places by using the banner, you can include them in the package and fonts on Typekit will work as usual.

  If the banner can be used on a variety of unfamiliar names, however, the best option is to serve in an iframe with an attribute known CBC and include the URL of the source on your fonts kit. Iframe referer matches the URL of the CBC, not the parent page, and the fonts will load in the iframe.

  I hope this helps; Let me know if you have any other questions. Best,

  -liz

• Help, videos play more after the publication

  Hey guys,.

  Hoping someone can come to my rescue... again.

  I encountered this problem where once that a project is published... the videos are no longer will play. Basically I have an introductory video that would play on slide 1. I tried to test the scope by putting a slide before her, but no effect.

  What happens in practice is when I publish and then try to view .swf output, the project starts, the screen remains black, progression to the point of break from the video (Captivate is on pause project until end of video) and the video never plays. I have to press play on the bar to continue reading and after that, he moves to the next slide, totally ignoring the intro video.

  I tried 3 different videos, 3 different formats (F4V, MP4, FLV) and 2 new projects. In terms simple, videos do not play after the publication. They work very well in Captivate, but after a postback, the project won't play them.

  Any ideas? Thank you very much for your time and your help now and in the past.

  BTW I use 6 Captivate.

  For all those interested in this problem, here is the solution.  Download the files here: https://acrobat.com/#d=m6Vq2n63kILAldt * oihfpQ

  These files will have to replace the existing files in your Adobe directory. Access your Captivate 6 files in your C drive, go to the folder called "sdk", then "libs". The files that you have received in this download replaces the files that are in "cplibs" which you should see in the "libs" folder Replace the appropriate files (9.0 and 10.0) and then republish it some projects that need fixing. Your videos shoudld play now.

  Vikram thanks for the help and I thank Adobe is so quick and useful in their solutions for the user.

• It shows the white border around the document after the publication

  

  I am facing some problems with the edition of the flash file. After the publication in HTMl; It shows the white border to all parts of the document.

  The size of my document is width:-1280 height: 650. He adds border border all the sides up and down are greater than left and right.

  I tried several ways, changed my setting of the flash as well but no use. I'm really confused because of this.

  To my surprise to the SWF file show perfect match and fit exactly window (showing no boundaries like HTML)

  I don't know exactly where it's getting white borders.

  
  Here's my setting to publish

  
  Flash: -.

  -------------------------------------------------------------

  Version: Flash Player 9

  Load order: bottom to top

  The ActionScript Version: ActionScript 2.0

  
  HTML: -.

  ------------------------------------------------------------

  Model: Flash only

  Size: Game Movie

  Quality:-top

  Window mode: window

  Alignment of HTML: default

  Scale: Exact adjustment

  Alignment: horizontal:-left, vertical: Top

  
  Any help would be greatly appreciated

  I told you to add this code, is not that you have it already.

• Files referenced is not showing is not on another PC after the publication

  Hi all, I have questions get referenced files and folders in my project after the publication of the draft in an .exe file. I inserted the buttons that success, are to open the files within my slides but after compilation and move the exe files and code files in the same folder on a different pc buttons do not open files outside of the computer on which it was initially published. Pls what can I do?

  Hello

  The way simplest to specify a relative path must avoid any navigation you can to find any file that you are linking and simply type the file name in the dialog box. Once you have done this, you just check that the file is present alongside the Captivate movie so that during playback, it can find the file.

  I think that most people do a corresponding error when they use the dialog box to find and select the file they establish between. When you do this, Captivate conscientiously inserts the path to the file on your own hard drive. This means that the file will be stored the the exact location using the same drive letter on PC the end-user for things to work in the end.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Maintain the links after the publication

  Hi all
  
  In my current project, users are offered the opportunity to open some PDF versions of some samples on the screen by using the button 'open the file or url '. I moved the samples into a folder on a CD and adjusted the link button accordingly. However, after the publication of the project on the SAME CD, the links no longer work.
  
  Can anyone offer some advice?
  
  Thank you
  
  AM

  Hi AM

  What happens exactly? Did you hear only a click, then nothing? Do you see a web browser? What?

  See you soon... Rick

• WebCenter content get lost after the redeployment of the application

  Hi all

  We have a portal web Center running application to our company. After it has been deployed in the production environment, a member of the admin team added some content on some pages using the Oracle WebCenter Portal administration Console. Now, there are a few requests of change that we are working on the same application. Every time we complete the change and it is deployed to the integration and Production environment, content published by the administration team is lost. They are having to redo this content on this page on any redeployment of the application. It always happens in integration / prod environment. Is there a way, that when redeploy us the application, we do not replace the content already added to the pages of the application?

  Or do we need to perform the same content in the Jdeveloper environment and produce some deployable for this be packed with deployment files? Please let us how we can resolve this situation. Thank you.

  Kind regards

  Anitha

  Hi all

  We found what was the problem that was causing the above behavior. According to the guidelines of this doc (WebCenter portal deployment: Applications Framework - 11 g Release 1 (11.1.1.6.0)), all content added to the pages, should be retained even after the redeployment. Only changes made to the navigation model must "round-trip on development." Added content on the pages after that initial deployment runtime does not "round-trip on development."

  The question was essentially in the way in which the application has been deployed. Each time, the new version was to be deployed we were not deployment out the version of the application and the deployment of the new version. Now, we have used "Redeploy" option to deploy the release. This fixed our problem. The content is now kept after the new deployment version too. It was also important to use the same MDS and Partition repository for deployment after the addition of the duration of the content to the pages.

  Kind regards

  Anitha

• Some ESX4 configurations are lost after the reboot of the system

  Hi people,

  I use ESX4 server for months.

  Lately, after creating a few Pools of resources (RP) and the addition of virtual machines in the pool, I noticed that after rebooting my system, I lost all the Resource Pools, I created.

  This problem of loss of configuration is not only limited to the RPs, I also lost some of the configurations of the network/portgroup after system reboot.

  This problem is is produced as well when I entered "Maintenance mode" and then then rebooted the system;  and also when I typed the command "reboot" in the bash shell (I typed 'reboot' command 'sync' several times before typing.)

  This problem becomes a kind of annoyance since I have to re-create the lost configuration each time that I reboot.

  Is it possible to manually force the ESX4 to save the configuration for that I do not keep losing part of my configurations?

  Could someone please help?

  Thanks in advance.

  Danny

  Really glad its sorted for you, as I said, I saw the question before at a customer's site and you will never know that the root is full, except if you look in the service console. It would be good to have this visible through the vi client, but in the meantime it just added monthly controls!

  Thank you

  Dan

• After the publication of various lood slide

  When using captivate 6, often when the publication, the blade will be different, the spacing of the police has changed and the bullets went from two points of open rectangles. I have a situation where the Chinese fonts don't come through at all, where the Chinese should be on the screen I get small rectangles.

  Any suggestions?

  Hi Tracy590600,

  Welcome to the Adobe Forums.

  Please try to change the Powerpoint PPT and then also remove the theme within the Powerpoint that you import into Captivate.

  Then try the import inside Captivate PPT and see if the problem persists.

  Thank you

  Loveesh

• Disk space lost after the restoration of Bootcamp - El Capitan

  Hello

  I've created a Partition of Windows 49 GB using Bootcamp and then tried to restore the partition after. To restore the partition that I got a message error "your drive could not be restored to a single partition. Since then, I have "lost" the 49 GB of space.

  I checked the similar thread, but I'm not sure on what to do to fix this. Outputs of suggested controls are as follows:

  

  

  

  

  

  I can see on the screenshot on the bottom the 49GB, but do not know how to release.

  I tried running in Recovery Mode and diskutil repairDisk disk0 disk utility but this has not resolved.

  Any help would be appreciated!

  Thank you

  You will temporarily lose the HD recovery. Please backup OS X.

  1. merge the HD recovery in OS X. The order of the disk slices is essential in the following command.

  diskutil mergePartitions jhfs + "Macintosh HD" disk0s2 disk0s3

  2. in disk utility, expand the new OS X partition to cover the entire disc.

  3. re-install OS x and recover your Recovery HD.

  If you are comfortable with the Terminal commands, then

  1 backup OSX and all of your files - use Time Machine to back up or restore your Mac - Apple Support .

  2. boot into Internet recovery (CMD + Opt + R) - OS X: on OS X Recovery - Apple Support .

  3. click on Utilties-> disk utility and erase your entire internal drive.

  4. restoration of OSX and your files - use Time Machine to back up or restore your Mac - Apple Support .

  This requires another external drive that can accommodate TM backup - backup disks that you can use with Time Machine - Apple Support .

• Start Windows lost after the partitioning of the disk next to Mac!

  Hi, I've lost my windows boot after creating a small new partition in disk utility. Could someone help me pls?

  Can you post the output of the following commands in OSX Terminal?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Animations in the taskbar are lost after the installation of Windows 7 Service Pack 1!

  Hello

  Today I installed Windows 7 Service Pack 1. After you install the service pack, all the animations in the taskbar are lost! I tried to restart the computer 2 times, always the same.
  Then, I uninstalled SP1. The animations are back! Now I tried to reinstall SP1, and the animations are lost again! I want to have the SP1 and animations.

  Help, please!

  Marko Calasan.

  Hello

  ·         Are you referring to the Aero features in Windows 7?

  I suggest you run the aero Troubleshooter and check if that helps resolve the issue.

  See the link below to open utility troubleshooting Aero.

  Open the Aero Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Aero-Troubleshooter

  See also:

  Guided Help: Troubleshoot aero in Windows 7

  http://support.Microsoft.com/kb/976170

• quality icon lost after the backup

  Hello world

  I created a few trays icon in illustrator size 16px and I saved it in png.

  Uploaded on photoshop and save as ICO.

  This process makes the icon lose quality.

  Even just save as png since lost half of the details that make a good icon.

  Does anyone have a better way to have an icon of good quality in the end?

  Thanks in advance,

  Ana

  Well, you can always design in Illustrator. But certainly turn on preview pixelated and align your shapes to the grid. They may need an extra in Photoshop clean after that you export, as well.

• Custom actions lost after the "bomb".

  This happened to me in several versions of AI and PSD; I work along, writing some actions from time to time bombs of the application and then all my new actions will be lost. I know, is not the bomb, but he just did. I guess that the best practice, after having written an action, just to save my folder actions customized using actions - menu. It just seems odd that I should lose these actions. It also loses custom workspaces that have been made since the closure. Once again, my habit to leave the program running for days is probably a bad. Just curious to see how others deal with this nuisance bit.

  Crashes kill all session content and of new actions or workspaces is the content in session until they are saved, or the app is left.

  You don't want to save actions.workspaces manually, just be sure to leave the app sometimes while they are written in the preferences (or wherever it is that they are saved in temp files).

  I always check new actions if I intend to use them at any time in the future. And I usually only have my custome work space so I keep it that way.

  But, like you, I leave applications running for weeks at a time.