Start Windows lost after the partitioning of the disk next to Mac!

Similar Questions

• 'open with' access lost Windows Apps after the last update of Mac OS

  It seems that the last Mac OS update has broken something with VMWare Fusion. Before I could right-click on a file in the Finder and the menu 'Open with' include all appropriate applications that have been installed in my different Windows VMs.  Now, the menu is empty and I have to run the application in Windows and open the file of the application.  As you can imagine that it's boring and tedious.

  Has anyone else experienced this problem or does anyone have a solution?

  Thanks in advance.

  Carl

  Sorry,

  If this is the case, you can repopulate windows applications on your Mac in two ways app folder as far as I know.

  (1) via the mode of the unit: VMware KB: applications Windows Add to Applications folder on your Mac using VMware Fusion

  2) from the Virtual Machine settings > default Application

  (a) re - enable (disable and enable) Windows applications run the Mac application folder

• Cannot start Windows 7 after the update of the system

  I don't speak of Windows 7 RTM, I know is RC forum but I downloaded the RC of microsoft's official website and I can't install it, it reached the "end of installation"(ou quelque chose comme ça) phase and blue screen of death appears, saying "memory dump" and other things. ". That's why I downloaded RTM from a torrent site, I installed it, everything was fine, the aero was not on so I that I should update the video drivers and then I downloaded all the updates possible (via the control panel), then I restarted the pc and now I am not able to load windows , it's blue screen of death! Notice that I can run windows 7 mode safe mode, but when I try to start it in normal mode the blue screen appears. BTW, I have windows xp installed on my pc as well. So, here is my setup:

  AMD 7750 dual-core 2, 7GHz
  4 GB of RAM, 800 Mhz, but the system says 3.25 alone can be used
  ATI 4730 512 MB, btw I have integrated graphics card (ati hd3200, I think), don't know if it's important but...

  Here is the information about the error:

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.1.7600.2.0.0.256.1
  Locale ID: 1026

  More information about the problem:
  BCCode: 116
  BCP1: 871F13D8
  BCP2: 90C204B4
  BCP3: 00000000
  BCP4: 00000002
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 256_1

  Files helping to describe the problem:
  F:\Windows\Minidump\080809-15375-01.dmp
  F:\Users\blah\AppData\Local\Temp\WER-22953-0.SysData.XML

  Read our privacy statement online:
    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  F:\Windows\system32\en-US\erofflps.txt

  Here's the crash dump:

  Debug version of Microsoft Windows (R) 6.11.0001.404 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [F:\Windows\Minidump\080809-14921-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: * invalid *.
  ****************************************************************************
  * Loading of the symbol may be unreliable without a symbol search path.           *
  * Use .symfix to get the debugger to choose a symbol path.                   *
  * After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
  ****************************************************************************
  Executable search path is:
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  Cannot load the image \SystemRoot\system32\ntkrnlpa.exe, 0n2 error Win32
  WARNING: Unable to verify timestamp for ntkrnlpa.exe
  ERROR: Module load completed but symbols can be loaded for ntkrnlpa.exe
  Windows 7 Kernel Version 7600 MP (2 processors) free x 86 compatible
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 7600.16385.x86fre.win7_rtm.090713 - 1255
  Computer name:
  Core = 0 x 82803000 PsLoadedModuleList = 0x8294b810
  The debugging session: 11:50:54.734 Saturday, August 8, 2009 (GMT + 3)
  System Uptime: 0 days 0:00:19.343
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  Cannot load the image \SystemRoot\system32\ntkrnlpa.exe, 0n2 error Win32
  WARNING: Unable to verify timestamp for ntkrnlpa.exe
  ERROR: Module load completed but symbols can be loaded for ntkrnlpa.exe
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ..........
  Loading user symbols
  Loading unloaded module list
  .....

  Pirated Windows 7 allows malware, botnet zero-day ZDNet.com.url

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Cannot start Windows 7 after the conversion of the physical machine

  Hello

  I converted my windows 7 64 bit running physical machine to the virtual machine using converter 5.0. I am running VMWare Workstation 8.0. My physical machine hid the 100 MB boot partition and 90 GB main partition. During the conversion, I don't have an option to select a hidden partition, nor did I want in my virtual machine. Conversion failed with the following message (planned):

  Unable to find the system volume, reconfiguration is not possible.

  Then, I started the virtual machine using the Windows DVD and selected the option "repair". Once I arrived, I used diskpart to make my active primary partition and then followed the steps in this KB http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1037507 to fix everything including BCD. Once this was done, I used converted to reconfigure the virtual computer, and this time he succeeded. Everything was good and as expected up to that point. Now, when I start the VM, I get by BIOS init and then I get a black screen - no messages at all and he vm it is here without doing anything. I tried to fix it again and everything seems good (checked all the information using diskpart, bootrec and bcdedit so that automated repair) - everything seems to be in order, but the black screen is all I see when I try to start.

  Any help to guide me to this point is very popular figure.

  Thank you

  Andrey

  Disk2vhd create a vhd file
  Starwinds V2V converter converts the virtual hard disk into a vmdk
  This vmdk is assigned to a new virtual machine
  first boot the virtual machine goes into a Windows 7 drivers restore CD you patch

  my notes:http://sanbarrow.com/p2v2008r2.html

• I have windows xp after the installation of service pack 3 I can only start in safe mode

  I have windows XP after the installation of service pack 3 I can only start in safe mode?

  Hello

  ·         You get the error message?

  ·         What happens when you try to start in normal mode?

  Method 1

  Windows XP can in every start Safe Mode by default. Even if you select the option Start Windows normally, it always starts in Mode without failure. IOW, you can't get out of safe mode.

  This happens if the switch/SafeBoot is added to the Boot.ini file. / SafeBoot parameter forces a boot in safe mode by using the specified parameters. The available parameters are:

  (a) minimal (b) network (c) safeboot: minimal (alternateshell) For more information about the boot.ini switches, see visualization and correction of the settings of the boot on x 86 systems RESOLUTION (a) click Start, run and type MSCONFIG (b) click the Boot.ini tab (c) If you have a dual-boot system, select the entry that is appropriate under the [operating systems] (d) in section downstairs, Startup Options uncheck / hisFEBOOT (e) click OK (f) restart Windows The entry/SafeBoot are removed from the Boot.ini file.

  Method 2:

  If the above method is not the cause, it seems that Service Pack 3 is not installed correctly.

  Step 1: You try to run the system restore from safe mode that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  Step 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  Note: System requirements to install Windows XP SP3

  Reference: Learn how to install Windows XP Service Pack 3 (SP3)

  Hope the helps of information.

• Whenever I start my computer after the office's I get a windows firewall disabled alert

  Whenever I start my computer after the office is responsible, I get a warning from windows firewall disabled. The latter for more than 60 seconds. After that, my firewall is on.
  How to solve this delay?

  Hello

  What is firewall WIN XP or any other third-party firewall?

  If it is integrated, you can reset the firewall in factory default state. Run from the command prompts this command:

  NETSH FIREWALL RESET

  How to run the command prompt:

  Click on Start - run - write CMD , and then click OK

  LC

• Boot camp Win 7 0 x 34 blue screen during windows startup after the restoration with the image of the system.

  The hard drive on the Macbook pro was repartioned, all the boot camp and other drivers updated and Windows installed from the installation DVD. All the Windows updates available from 2012 (installation disc is 2012) until today have been installed and Boot camp 5.1 with all its drivers installed. Restoration was launched with an image of an external hard drive and a system repair disc system. Once Windows loads after the login screen, it crashes. A blue screen appears with the error code 0 x 00000034 and mention cache_manager... Windows restarts by itself and I can only use it in safe mode, which means that I can't download or install upgrades or programs.

  Analyze the dmp file since the first crash with Windows debugging tool showed that the problem seems to lie with

  AppleHFS.sys and svchost.exe with Bug Check 34 {107, ffffffffc0000420, 0, 0}.

  Here is the link to the complete analysis of the dmp for details file:

  https://1drv.Ms/u/s! AuzUtP_j9nLagwWWqWUTre4qNYmu

  Thank you very much in advance for your help

  Moschtermeedchen

  AppleHFS.sys/AppleMNT.sys are used to allow access to filesystems OSX JHFS +. Restoring Windows on Mac backups can be painful. If you have already fresh install of W7 on the internal drive, try the restore without installing any driver BC. Please be aware that such a restore is not aware of the partitions on your internal drive and can erase your internal drive.

• How to activate Windows XP after the installation of repair when you cannot connect to Normal startup.

  I got XP Home SP2 OEM installed on an AMD machine and the power supply is dead.
  I have a P4, I prefer to use in any case, I moved the hard drives of the AMD machine to machine P4.  Of course, XP wouldn't boot.
  Without saving anything, I performed a repair installation (under the installer, not Recovery Console).
  Everything seemed ok, but eventually, I restarted XP and a message box informed me that I could not connect until I had activated XP.
  Unfortunately, I can not run the Activation Assistant because I can not connect.

  I found that I could start the computer Safe Mode / command prompt and could then start Windows Explorer from the command line.
  I followed some advice I found online: I extracted wpa.dbl drive OEM installation and copied in the folder Windows\System32 and rebooted.  Nothing apparently changed; "" I still couldn't log mode "normal".
  I restarted mode safe mode / command prompt, began to Windows Explorer and installed XP SP3.

  Now I can connect mode safe mode without network but cannot connect with networking.  Normal mode is not yet available.

  When I try to start 'normally', the saying that I need to activate before I can connect message.  If I say 'Yes' to 'Activate now?', the background of the desktop appears (my own shows JPG) - but that's all.  The mouse cursor is there, but I have found no way to access all the features after it.

  I need suggestions for possible patches that will avoid the need to reinstall completely.

  Here is the response of Fracture, it worked for me:

  http://social.Microsoft.com/forums/en-us/genuinewindowsxp/thread/ece30d55-d72d-4FF9-AFE8-a577f0f4564f

• Windows calendar after the system restore notes no longer exist.

  The Windows calendar after the system restore notes disappeared forever, or can be found somewhere?

  Hello
  
  First we recommend that you search the .ics files confirm the windows calendar old files are present on the hard drive.
  Visit this link for more information: http://windows.microsoft.com/en-US/windows-vista/Tips-for-finding-files
  Windows Vista has an option to cancel the system restore. To do this, follow these steps.
  1. open the system restore by clicking the Start button, all programs, accessories, clicking System Tools, and then click System Restore.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. click on undo system restore and then click Next.
  3. proceed to review your choices and then click Finish.
   
  Your computer will restart. When you are finished, you will see a confirmation that the cancellation is complete.
  
  For more information, see this link: http://windows.microsoft.com/en-US/windows-vista/Undo-System-Restore
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to activate Windows 7 after the 30 day period?

  How can I activat windows 7 after the 30-day grace period?

  Type Activate in the Windows 7 search box and click on the Activate Windows icon that appears at the top of the Start Menu.  Then enter your genuine Windows 7 product key for the edition of Windows 7 you have installed.  If you do not have a genuine Windows 7 product key, you can buy one on the Microsoft Store. Carey Frisch

• Cannot use windows update after the new installation of xp sp2

  Cannot use windows update after the new installation of xp sp2

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• I use a Windows XP Ghost then my Windows lost by the Virus; Now, I can't configure AVG Antivirus.

  I use a Windows XP Ghost then my Windows lost by the Virus; Now, I can't configure AVG Antivirus.   WHY?   I can do my work continue?
  Help me.

  Well, I guess you had a virus and restored the computer via a Windows XP ghost image and now you're having trouble with AVG anti virus?

  Is it possible that the user account is damaged.

  Try to set a different user account and when / if / I hope that things work out well, remove the old user account.

  http://support.Microsoft.com/kb/279783

  If I misinterpreted your assignment, then maybe the ghost of Windows XP image is also infected by a virus not allowing only not AVG to implement.

  Please post back with more information. Thank you.

• activate Windows xp after the expiry of the grace period of 30 days

  How to activate windows xp after the expiry of the grace period of 30 days, if the user does not have internet on PC? the user can get a new activation code on the microsoft site?

  "rajesh kur" wrote in message News: 6811c2fa-5fa2-4c2c-805f-2347c8e571c2...

  How to activate windows xp after the expiry of the grace period of 30 days, if the user does not have internet on PC? the user can get a new activation code on the microsoft site?

  Use phone Activation
   
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• The windows 10 ISO file will still work to upgrade my computer to Windows 7 after the date limit to install the free version?

  Original title: upgrade Windows 10

  I made an iso file for windows 10. I am waiting to upgrade until all the bugs are being developed. My question is: will the iso file of windows 10 still work to upgrade my computer to windows 7 after the date limit to install the free version?

  The ISO will work after the date limit, but you can buy Windows 10 after the date limit, if you don't improve and activate it before that date.

  Windows 10 is delivered as a service:

  Windows July 10 release - build 10240

  Windows Update 10 November - build 10586 (with many updates depuis.13,.29,. 36)

  If you want to take advantage of the free offer, you must do so before July 29, 2016.

  If you the newer versions are released before then, you can always download and install when it becomes available.

  You could also install it now then download updates via Windows Update as soon as they are available.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• can not turn on power windows firewall after the expiry of pre-installed McAfee

  Hi, I can't turn on the power windows firewall after the expiry of pre-installed McAfee, first issue of w / this time.

  New pc, Lenovo Win 7 Professional.

  Thank you; Ricky

  Did you uninstall McAfee?  If not do it first and then try to use the windows firewall.
  If still a problem, run the McAfee available here - cleaning tool
  http://service.McAfee.com/FAQDocument.aspx?ID=TS101331