MI unidad dvd are reconocidida como a usb y no me abre discos compactos archivos

Similar Questions

• Como leer USB desde virtual machine in VMWARE ESXi 4.0?

  A cordial Saludo a todos.

  Tengo wont in a server the Vmware ESXi 4.0 platform, sober cual tengo una virtual machine en Windows Server 2003.

  Necesito UN por favor me indicandome como debo hacer para leer desde the virtual USB devices help machine Win. Server 2003.

  Desde el client Vsphere, ingreso a virtual machine of the Delcourt config, there are added el driver USB (ver imagen adjunta), pero ahun sigue sin funcionarme.

  Quedo muy atento a sus comentarios.

  Saludos.

  Para aquellos con VMWare ESXi 4.0 Estos his los comandos para fornuis 4.1, the gran novedad 4.1 are el soporte para Máquinas Office USB.
   
  De el addition of VMware ESXi en el sitio of mailing package. :

  http://downloads.VMware.com/d/info/datacenter_downloads/vmware_vsphere_hypervisor_esxi/4
   
  ESXi 4.1 (change ZIP ESXi 4.0)

  The ultima version available

  A1 knew servidor con VMware vSphere client ESXi.
  Apague (poweroff) todas las maquinas office desde el servidor.
   
  Haga click derecho sober el arbol y poner ESXi a mantenimiento modo.

  UNA vez hecho esto, vaya has the config of VMware vSphere data of the client - datos almacen - almacen click on database "sober" derecho y push-button.
   
  Tenga into account that el anterior are 'SUFFER', haga click en el y luego undergo. Archivo zip en el almacen of data.
   
  El siguiente paso are al por Existing VMWare Server access.

  If ssh without esta en VMWARE habilitada, siga los pasos following in her console server:

  ALT + F1 para as aparezca algo in the pantalla, escriba "sin soporte.

  the root contrasena ingresar

  VI / etc / inetd.conf

  descomentar the line that contains parameters of the SSH los y el archivo save.

  REINICIAR el servidor.

  Ready, con el servidor enable Existing through SSH.

  Comprobacion del archivo:

  esxupdate - package = / vmfs/volumes/datastoreI/upgrade-from-ESXi4.0-to-4.1.0-0.0.260247-release.zipcheck

  If "Check OK", run the change:

  esxupdate - package = / technical vmfs/volumes/datastoreI/upgrade-from-ESXi4.0-to-4.1.0-0.0.260247-release.zip

  NOTE: este 'almacen of datos' are el number of su almacen of datos e caso, I can change number, entonces uno el

  LS / vmfs / Volumes /.

  Y ver el number that in su almacen of datos esta.

  Once completed the change, el servidor is reiniciara, por lo that connect acaba con el client of VMware vSphere, quitar el mantenimiento modo y las maquinas office.

  Important note:

  Run USB, las maquinas office debe ser version para el 7 y add el driver USB en the virtual machine if is is in version 4, the fuera Máquina virtual con simplemente haga click derecho in the part superior su version 7 of change.

• Error: the registry settings used by the iTunes for importing and burning CDs and DVDs are missing.

  Original title: the registry settings used by the iTunes for importing and burning CDs and DVDs are missing. This can occur as a result of installing other CD burning software. reinstall iTunes

  I've loaded and discharged Itunes 5 times and still get the same error message box. This error does exactly what he says, I can not burn anything in my itunes library. ITunes worked great in XP-3 no problems. It will not work on Windows 7-64.  I can download and play songs from any site, but can not burn anything.  And I don't have any other burning software on my CD PC

  Hello PohlCat,

  Given that you have uninstalled and reinstalled iTunes without correcting the problem, it may be with a 3rd party product causes a problem.

  I would look at the post here to see if this solution can help you. It's from a 3rd third party site, you should use at your own risk, because it has not been tested, but seemed to help others with the same error that you are experiencing.

  Please reply back and let us know if this can help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Can someone help me create a Bootable ISO DVD from a windows bootable USB ISO file?

  OT: Burning ISO file.

  Can someone help me create a Bootable ISO DVD from a windows bootable USB ISO file?

  I tried to burn the ISO of the DVD file in my system through Image burning software. All copied and verified by himself and said ok.

  But, when I tried to open/run the file, it displays that autorun.dll is not a valid windows image file.  Whereas the same iso file is the opening of the bootable USB key.

  Therefore, I want to copy the file to the USB.iso on DVD.

  It would be simpler just take your. ISO file and use it to burn a DVD using ImgBurn. Don't forget to check the "Hash" value of your. ISO (before creating the DVD) from time to time people do they receive a corrupted download .iso.

  J W Stuart: http://www.pagestart.com

• window of the unidad dvd y cd 8 no reconoce neither wind nor graba

  The unidad DVD y CD funcionar dejo of repent, mi ordenador not the reconoce in las propiedades me no dice as the unidad works correctamente, pero no're cierto. He followed las instrucciones para los altos filters eliminate y bajos pero cuando llegó a page than deben estar don't exist... Could help me, thanks.

  Hello

  Sorry, this forum is in English only.

  Please select the language icon at the bottom of this page English and select your native language from the popup list to view the forums in the language of your choice.

  If you can't find the language of your choice, support for international sites additional options can be found by clicking on the following link:

  http://support.Microsoft.com/common/international.aspx

  Concerning

• COMO PUEDO GRABAR IN MI LAP, A DISCO, PARA DESPUES EVIDENCE OF CDA CD PARA CONVERTIRLO UN FORMATO O PASARLO HAS UN FORMATO MP3

  COMO PUEDO GRABAR IN MI LAP, A DISCO, PARA DESPUES EVIDENCE OF CDA CD PARA CONVERTIRLO UN FORMATO O PASARLO HAS UN FORMATO MP3

  Look in the lower left corner of this window.

  

  Where we see English, click on it and select your language from the list.

  

  OR

  http://support.Microsoft.com/common/international.aspx

• Password reset disk only describes the use of floppy drive A (and they are obsolete). Password reset disk cannot be a CD-DVD, I can use a USB flash instead of the floppy drive?

  I wanted to create a RESET DISK of PASSWORD, but NOOOOO - my machine has a FLOPPY DRIVE. No product only the CD/DVD PLAYERS and one cannot change the a drive to a different letter designation.

  If you really NEED to do this, you are up the proverbial Creek, apparently.  Hard to believe!   How long has he given now that ANYONE used FLOPPEIES (small square disks)?  Certainly, we are asked not to believe that nobody is realized for this oversight!  I TRIED a CD/DVD - no dice.  My machine has 2 CD/DVD players, a Terrabyte Mobile with a slot drive.  My spouse has built this machine, and it is ensured that there are enough USB connectors that I could plant some tulips!  (It's photography & video editing - retirees have a busy life, that pays well.)  There are sites for readers of any persuasion EXCEPT the 1998 'PLACE floppy DISKS'.  Also, as with most machines, I do not want to return and crush things that my husband has a loading on the drives and call other than the names they bear within the network as things go well, otherwise.  We can't decide to call H Drive (CD/DVD drive), drive A, to say, just for the sake of my need to create a password reset disk.  My machine does not allow me to do things on the "fly".  I have to create a NEW one (and download something from those that already exist).  A ray of light shines through the same mess!  I think that maybe I can use a "USB key"?  Does not have a CD rom, but just explore, I ran across the words using a player instead of 'A' USB flash drive.  Hoping that USB key or "memory stick" is acceptable!

  * E-mail address is removed from the privacy * * E-mail address is removed from the privacy *       

  Hi Janice,.

  If you are using Vista, please see the following: http://www.techrepublic.com/blog/window-on-windows/create-a-vista-password-reset-disk-using-a-usb-flash-drive/547.

  If using Windows 7, please see the following: http://www.techrepublic.com/blog/window-on-windows/use-a-usb-flash-drive-to-create-windows-password-reset-disk-in-windows-7/4142?tag=rbxccnbtr1.

  From what I read, it seems quite simple and easy in both cases.  And not worry about drive letters - it will take whatever drive letter you choose (or who has been assigned to the flash player).

  I hope this helps.

  Good luck!

• My laptop does not recognize the DVD drive or an external USB DVD drive.

  My laptop does not reconise the integrated DVD or an external USB, DVD player.  But if I set the BIOS to let the laptop for the start of the DVD player and the DVD player worked fine.  He could read the disc.  Once, I deleted the program Nero of the system and I don't know if some Windows file has been corrupted.

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ===================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please make all underneath the same if you have done some before as is often
  the set of operations that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device.
  The driver tab - click on update drivers (this will probably do nothing) - then do a RIGHT CLICK
  the reader - UNINSTALL - REBOOT this will refresh the default driver stack. Even
  If the drive appears not to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, might
  having a cable loose or slight corrosion on the contacts (usually for a laptop) and
  other questions.

  Your CD or DVD drive is missing or is not recognized by Windows or
  other programs
  http://support.Microsoft.com/kb/314060

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other
  programs - a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that
  you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the
  Setup Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check
  in both ends of the cables. Remove and replace, do not just tight. For portable computers, you can
  Often, clean power and contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system
  Designer and manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case
  (Read burn CD & DVD and CD and DVD). So it is not unusual for 1 or 2 pieces
  No function while others do so properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? He
  are some registry entries that do not fix the resolution of problems and those who "might".
  be the cause.

  Check with your system manufacturer Maker and possible device for two firmware
  updates and the correct registry entries for your car.

  Here are the keys in my opinion, are those in question - for the CD/DVD drive - sub
  the key of course because there will be other subkeys in these keys. Do not forget to ask specific
  involved as well as the settings key.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a restore
  Point before you change anything whatsoever) - find the DevManView device and then right click it open in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager,
  that displays all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Family DVD of video clips on USB

  Hello

  Asked me to transfer some family DVDs onto a USB stick for a member of the family goes to Australia over the weekend.

  I use FCP and El Capitan.  The only way I can think to do is to install Snow Leopard of DVD and MPEG Streamclip with QT add on and then can do.  I had problems in the past with dual boot Snow Leopard and El Capitan.  If I had a spare SSD I would use that as a separate boot,

  Any help gratefully received do not long to transfer 15 DVD

  Matt

  I treat the DVD with this and add the converted files to USB flash.

  https://handbrake.fr/downloads.php

• HDD and dvd are not recognized in the configuration menu, what could be the problem?

  The hard drive and dvd drive are not recognized on the configuration menu for my desktop Pavilion a4316f.  What is a controller failure?  A PCI controller can be used to replace the motherboard controller?

  dhobs,

  Anguish, that the suffering of the faulty motherboard has been aggravated by your actions. Why you decided to perform a restore (which re - formate the disk, erase all your data files (documents, photos, videos to misic,) is really amazing.)

  You had a viable BONE, work and the data store. You he clobbered with recovery. As explained, the 'tattoo' reads the embedded hardware configuration and will stop at the resumption of treatment if it detects a change.

  Only temporary help I can offer is to open the computer case and install a small 12v on the NVidia chip fan. IF the chip is not 100% burned, you can earn low enough time to reinstall the operating system and then add the map.

• Satellite M70: DL - DVD are not recognized on Pioneer DVR-K16S

  My DVD player does not recognize DL media (this device is compatible DL) so I can't burn this type of DVD, that someone can tell me why? all other media CD and DVD works great. I can write and read, but with DL, I can't write because this type of media are not recognized. I tried to find information and driver and firmware on the internet, but I can't find note on DVR-K16s pilot.

  I have a satellite M70

  Best regards.

  Hello

  According to the specifications of the Satellite M70, it should be possible to burn the DL DVD.
  It's not easy to say why you can't burn your DL media.
  You know that not all readers to support all of the CD and DVD.
  A friend of mine tried to use DL media. There were also some problems with another drive.
  I recommend that you test some DL media.

• Press any key to boot from the Cd/DVD, I can't press USB keyboard.

  The keyboard is usb and is placed into the usb port connected to the phones, I want to install windows 8.1 but I can't start from the Cd/Dvd cuz of this problem. Don't tell me to try another port, I have tried everything. All solutions?

  Nothing but its good lol, but I discovered that I should get A PS2 Keyboard nvm

• Data on DVD are not detected.

  Drives appear empty, sort of...

  My wife and I have our wedding photos on a bunch of different discs (given to us by the photographer).  We were married for more than 4 years and we looked through records then and everything seems to work properly.

  We got a new hard drive and I'm putting a copy of all of our photos on the disk for easy access.  All the disks with our wedding on her photos do not read.  The disks are perfectly 100% clean, no dist, fingerprints or even light scratches.  Most of these disks are DVD + r, but there are a few DVD - r and CD - R or two.  None of them will not be read.  I put the drive, go to my computer and when I click on the DVD - ROM drive, it says: "Please insert a disk".  I know there is stuff on the disc!  You can even see the ring darker on the back of the disc where it burned!  And as I said, I looked at them before!

  Normally I would say, bad DVD - ROM drive.  But here's the catch.  All other DVDs and CDs I have work perfectly well.  Any music CD, I put in rooms without problem.   All other DVD works great.  I don't understand.  It's like only the things that came the photographer DO NOT work.  But as I said, we looked at these drives before (on a different computer, an old we have more).  I have thousands of other photos that I burned (I'm an amateur photographer) and they all work very well when I put them.

  When I have the computer window to the top and I insert a disc, the icon changes to the disk/drive image to a larger image of a disc, and it says DVD + R or DVD-R or CD - R, that maps the drive I entered.  SO, it's like he knows what kind of record, I entered, but he always tells me to enter a disk...?  Also, a couple of discs exposure which is a certain amount of disk space used (for example, "2.1 G to 4.7 G available".)  Then he even knows the amount of material is on the disk, but it still says "enter disk".  Any ideas?

  A little more info... I tried to put the discs in our laptop... same result.  Also on the laptop uses Vista Home Premium, as I described above.

  Need help please, I need these photos! My wife will be devastated!

  OK, just to close it...

  After I posted my question above, I went and did a few other tasks around the House and came back and tried to load the disks again.  Each of them works now.  I have no idea why.  As I was saying, before I was getting errors on EACH of them, but each of them now.  Makes me think that I'm going crazy... I swear I'm not drugs.

  Do not know what has changed, I have nothing to the computer.  Well, problem solved I guess.

• Pavilion dm1: how the recovery 2 and 3 disc (dvd) to be bootable on USB?

  Hi, my drive hard computers have crasched so I decided to buy a new hard drive and also the recovery kit that comes as a dvd discs. But given that the computer have any dvd player I need to move the data from dvd-drive to a USB key. So I use another computer to 'move' the data between dvd and usb (I use powerISO program, to copy the data into the ISO and make it bootable on a USB key).  To make the USB bootable for the first disc is easy because it contains bootable files but I don't know how the dvd 2 and 3 to be initiated through the USB, they do not contain startup files. So I did not be longer when the recovery program stops and application disk 2. Any suggestions?

  I found a solution, and it's a simple.

  Just move all *.wim DVDs 2 and 3 files to the directory disk 1 on the USB stick PRELOAD. I also changed the information in info.dat and the SSRD.dat (place in the Repertory of PRELOAD) file to not understand anything of disc 2 or 3, if necessary, I do not know...

  Info.dat:

  BOOT

  SSRD.dat:

  NumberOfDiscs = 1
  SOURCE_ROOT = C:\RM\Image\
  UP_SIZE = 69631
  UP_OFFSET = 204800

  After that, it was only to start the computer, press ESC and select boot from a USB...

  * Note. The USB is made bootable for disk 1

• I'm confused. Last year I bought an Inspiron from Dell., with wmp. The only thing needed to play Blu - Ray DVDs are the new codecs?

  Dell Inspiron has a matshita dvd +-rw drive uj8b1 and the driver is a samsung HM641j1.

  Gotcha!  It is the material as well as the software miss me.  Thank you.  guess I'm stuck with my TV.

  ======================================
  You are welcome and thank you for the comments.