Micro detects no voice.

Original title: need for my cat... can't use my micro... can not detect my voice... _

Cannot use my microphone, does not detect my voice.

Hello

·         What program do you use to chat?

·         It worked before?

There are several possible causes of this problem:

·         The microphone is close enough to pick up your voice. Make sure that the microphone is positioned close enough and you speak directly into it.

·         The microphone is muted. Some microphones have an external control for muting. Make sure that the mute control is disabled.

·         The microphone input level is too low. Make sure that the microphone input level is set correctly.

(1) run the fix it to http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-sound-problems

Diana

Microsoft Answers Support Engineer

Visit our Microsoft answers feedback Forum and let us know what you think.

If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Tags: Windows

Similar Questions

  • INTERNAL MICROPHONE DOES NOT DETECT MY VOICE

    Hello

    I use ENVY HP dv6, CB37UAR #ABA only work on a Windows 8 operating system to 64-bit. My voice cannot be detected in the internal mic. I would be very happy if you can help me.

    Thanks for your concern.

    Hello

    Please find the link given below might help you solve your problem.

    Set the microphone and Line-in problems (Windows 7)

    Set the microphone and Line-in problems (Windows 8)

  • Re: Satellite Pro M70 - cannot save a voice

    I can't record voice using the Accessorise-online entertainment-Sound Recorder online it will give clip of silence

    In addition, I can't record voice message in Messenger, it can not detect the voice

    Thank you

    Maybe you should check you first external microphone if it of working.
    Then you could test is in Control Panel-> sound & audio properties-> voice-> test equipment

  • Satellite L755-1NM - built-in microphone out fading

    He's tried to call Skype, only to discover that the other person was not at all hear me. Checked the settings of the microphone in Skype and the parameters of the device, and the microphone is about not working not properly.

    What happens is that whenever I start anything that can use the microphone (so, when I call, or when I check the settings of the microphone), it works for a short time, but, in a few seconds, just flatlines.

    As a way to illustrate, I recorded my voice making a constant sound on [vocaroo | http://vocaroo.com/i/s01hJV8kLaMP]. What you hear is my micro detect noise and fading then out, ends up losing any sound detection.

    I think this could be a hardware problem, because I did not bring any changes to the software that may have affected the microphone. In fact, just some time after I found this question there, I reinstalled the drivers and it has not corrected. In this case, I guess the only option is to send my laptop in for fixing (which I would rather).

    In addition, he was still perfectly working about 2 or 3 days ago.

    Anyone have any ideas?

    I assume you mean on the internal mic, which is part of the webcam.
    Have you tried an external microphone?
    The same problem appear using this external microphone?

    I think it would be useful to know that, because in this case, we would know if its hardware or software (setting) related question.

    You can also check some settings of microphone that is located in:
    Panel of-> sound-> recording tab-> mic (right click, properties)

    In a new window (mic properties), you can find tabs more as levels, improvements, advanced

    In the levels tab, you can change the Microphone Amplifier.
    On the upgrades tab, you can disable all effects as well, you can activate the acoustic echo cancellation and noise suppression

    I recommend you test check and try different options.

  • Satellite M70-339 - not possible to record via mic internal

    I have a Satellite M70-339 (running XP home) not recording via internal microphone

    The internal michrophone detects no voice - no wavy on sound recorder and Skype line not to pick up my voice, yet the device manager tells me that it works properly and the microphone is selected in audio and audio settings.

    Are you really sure that your model of laptop has an internal microphone? I have the Satellite M70-159 and there is no internal microphone.

  • Siri has stopped running iPhone iOS 9 6 s

    Siri has stopped working does not detect the voice or dictation are all assets have reset and always updated and restored does not work iPhone iOS 9 6 s

    I had a similar problem - turns out be the network (WiFi) that I was on. I turned off WiFi and Siri started working again. Looks like my company network is filtering or blocking traffic Siri

  • MIC not working not not for HP Pavilion 15-p045TX

    My mic for HP Pavilion 15-p045TX is not work .i checked for sound controls option it show registration permit as well as the green light shows that we speak.but, it detects no voice. When I try to video chat online for google.it gives the message because your microphone is off or cutting material.

    Thanks for the reply...

    I updated my windows and it worked for me

  • registration of Microsoft lifechat

    I'm having, I USED TO HEAR n sing SONGS through IT, BUT do not know how my singing with her n micro phones.so voice could you please help me to know how to record my voice singin' through it.

    (I downloaded with USB or only to listening music but has not downloaded the messenger live chat as I don't have cat nw)

    Hi ajaypandey,

    Thank you for visiting Windows Vista Microsoft answers forum.

    You must follow the steps mentioned in the link to the KB Article below to record the sound using Microsoft LifeChat:

    You cannot record sound by using the LifeChat headset microphone:
    http://support.Microsoft.com/kb/935748

    Please let us know if it helps.

    Thank you and best regards,
    David

  • Adding N2048P YES

    Hello

    I stacked the two switches to N2048P and created and added a VLAN 10 to all ports. I posted the VoiceVLAN to VLAN 10.

    I try to add the Polycom YES so Polycom phones are automatically transferred and assigned to VLAN 10.

    I've done this before on my devices 3524P easily via the web console such that there is an option specially for this. There is no option in the web interface for the N2048P well so I'm looking to add via CLI, but get an error.

    Yes vlan voice SW-STACK1 (config) #-table add 0004f2 PolycomTIPT

    He puts the error marker to 'o' to 'yes '.

    If someone could point me in the right direction I would really appreciate it.

    Thank you

    David.

    To get the phone automatically placed on VLAN 10 traffic, you will need to configure the VLAN 10 as the voice VLAN.

    Allow on a global scale.

    Console (config) #voice vlan

    Activate the voice VLAN on the specific interface.

    Console (config) # interface ethernet 1/g1

    Console (Config-if-Gi1/0/1) # vlan 10 voice

    Defines the General/Trunk interface. I would try the general mode first.

    Console (Config-if-Gi1/0/1) # switchport mode general

    Console # switchport general allowed vlan remove 10

    With this configuration, once the port detects a voice traffic it will place this traffic to VLAN 10. All no voice traffic from the client connected to the phone will be placed on the PVID.

  • Audio, set up the crash

    I / m new to Captivate and I use vista OS with a USB headset logitech, but when I try to register I get the following error. I have no problems with other applications of e-learning for good sound recording.

    I tried to reinstall the drivers and reinstall cap 4 and I have disabled all services start. A whole other ideas? Note on test audio Cap 4 does not detect a voice of entry if the headset option is listed in the audio devices. In all the non-cap scénarion microphone input works fine (?)

    Happy to hear of any siggestions people might - not a good start for me.

    captivateerror1.jpg

    Hello

    Try to get the latest patch for CP4.

    --

    Maury

  • Micro does not work, no voice not detected

    My microphone does not work.  I just had the microphone & tries to use.  I tried everything said earlier & still nothing.  I have SP3.  I try with any application.  I tried Windows Live Mail, Hypercam & others.  When you do the test it is said it had not detected voice.  It is plugged into the mic jack on the back of the computer, next to where the speakers are plugged. It's a new microphone that I received from Amozon. It has a mark on it, only 3.5 mm computer Clip on Mini Microphone. How can I get the microphone to work?

    Thank you

    original title: microphone does not work

    Faulty microphone? Try it on a friends computer.

    See you soon,.
    Jerry

  • HP 15-d005au Notebook PC (ENERGY: Bluetooth does not detect not not hi-fi micro LG)

    Are trying to detect a micro LG system model No. DM2740DAB via Bluetooth... all the settings look fine.  Pairs well with our Ipad LG.

    Hello

    Please try new pilot (June 5, 2015):

    http://ftp.HP.com/pub/SoftPaq/sp65001-65500/sp65049.exe

    (More dirivers are on the link above).

    Kind regards.

  • What is the ST Micro screen detection sensor?

    In the center of the action this message appears for a problem with the ST screen detection Micro Center. But, what is it and how do deal with him?

    Hello

    It is a driver provided by DELL. Please see the following articles to solve the problem:

    http://en.community.Dell.com/support-forums/laptop/f/3519/p/19390317/19907920.aspx

    http://social.technet.Microsoft.com/forums/en/w7itproappcompat/thread/f106ec13-b799-4EAA-8f67-d9de7af2d28d

  • I have the dell vostro 3450. I have problem with "ST Micro Screen detection sensor is not compatible with win 7.

    Hello

    I have the dell vostro 3450. I have problem with "ST Micro Screen detection sensor is not compatible with win 7.
    can someone help me please.

    THX,
    Sepahdar

    http://en.community.Dell.com/support-forums/laptop/f/3519/t/19390317.aspx

  • Micro ST screen detection sensor

    Why informs me that I need sensor for detecting micro screen ST...

    more to the point... How to acquire one it

    Hi John,.

    1. What is the full brand and model of the computer?

    2. when exactly you get the error message?

    3. you are unable to find the drivers for the device of ST Micro screen detection sensor?

     
    Please reply with answers to above questions and specifics of the question, so that we can better help you.

Maybe you are looking for

  • Portege R500 - Bad optical drive delays the start - how to fix?

    The Portege R500 has recently begun does not start. Initially there not some time later, frequently. By chance, I discovered that if I left alone for a minute or two, he will continue to start. That and the noise coming from the optical driver, made

  • receiving SMS on Inbox by default device

    Dear Sir using api to listen WMA received sms use specific port to send and receive. My Question is can I listen to port by default... or there is an api another RIM who give me notification of SMS received on the native inbox and the ability to read

  • BlackBerry Smartphones Adressbookfeature cannot be selected

    Hello Device: Blackberry8110 Trackball works very well. but when I select the addressbook, the device is suspended. The AddressBook is not enabled This only happens for the AddressBook feature. all other features work correctly. I can release the han

  • TMSPE and directly managed device

    Hello If we have a TP network with the following -SX20 5 -C60 2 -MX300 1 -100 users (Jabber video) -5 EX90 -1 control of VCS -MCU 1 -1 VCS Expressway -MSD 1 I know that, in order to manage devices, to add ICA-TMS-25 (we have more than 10 devices). Bu

  • Blurred when customers repost

    HelloI ran across what I know is a simple problem to solve the other day; Although I don't know how.I shot an event for a client and the images came out fantastic.  Here is an example of image.I put the images on my drive of google.  The images were