Micro level reset themselves

Similar Questions

• Micro level resets to 0 (zero) and puts himself – mute 10 Windows

  Level of the microphone back to zero '0' and gets muted in Windows 10. I have read all and followed all discussions about this issues and I can't solve. I spent 3 hours on the phone with Microsoft replaces drivers and nothing wrong with drivers or microphone. I deleted the spyware Rootkit.Fileless.MTGen so that remove the tracing files. It is a key issue that I use my microphone when working from home which is 3 days a week.

  I use Windows 10 and have the latest versions of Skype (although I had uninstalled and tried several older versions)

  What is the solution?

  I had to reset Windows 10 and everything works fine.

• Update of Firefox version make my settings and preferences reset themselves or they stay the same

  I wanted to know if when I update or the firefox browser is automatically updated to the latest version so my settings and browser preferences etc. that I made for the firefox browser change or reset themselves by default because I do not wish that they be as it is and would be a nuisance if I keep things from setting back again and again when the browser is updated to the version newer and newer so tell please me it doesn't, thank you.

  No, Firefox respect your preferences when you update. You should always have the value Firefox automatically updated, like this you keep most secure and the latest version. All your personal data and settings are safe.

• Reset low level.

  Hello

  I heard that you can do a low-level reset or something on a Cisco 3000 Concentrator. We had a lot of strange problem with this unit, we have removed the config file, but it doesn't solve the problem. It is possible to make total of file system reset?

  Hello

  In routers normally we use the passwd recovery procedure to bring this to the default state.

  but in the hub, I think you can use option 7 mentioned in the link below to load without any config file...

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2284/products_configuration_example09186a008014c1ba.shtml

  regds

• Micro system

  I turned off my computers microphone.  to save other empty titles to use as breaks in the media player. I can't find where to turn them back on.

  Thank you
  Steven V

  Hi Steve,.

  Thanks for choosing Microsoft Community.

  According to the description, it seems that you are having problems with microphone start-up. I will certainly help you fix this problem.

  I suggest that you follow the steps in order to test, check the connections and hardware, update the audio drivers and configure the audio settings of Windows.

  Step 1: Test of an audio signal

  1. Click on Start, then Control Panel.
  2. Click hardware and soundand then click manage audio devices...
  3. Click the recording tab.
  4. To test the microphone, speak into it. To test the line, send a signal to the line at the port of devices audio source (press play on the audio player). Look at the gray bars next to the name of the device under the recording tab:
     • If the gray bars next to the device name turns green, this device is active and an audio signal is passed through the microphone or line-in port. This step shows that this problem is related to sound parameters in the software that uses the microphone. If you have not already done so, set the device selected by default and adjust levels. Once the device is set by default and levels are defined, use and adjust the sound recording or voice carrying software.
     • If the gray bars remain inactive and grey, the device does not have a signal. Leave the record open tab and go to the next step.

  Step 2: Check the volume levels and mute

  The volume of the speaker to the microphone and line - in may be activated or rejected. Use the following steps to check the volume of speaker for line and microphone levels.

  1. Click Startand then click Control Panel.
  2. Click hardware and sound.
  3. Click sound.
  4. Select speakersand then click Properties.
  5. Click the levels tab.
  6. Click on any line that is cut and Muted next to Microphone button.
  7. Use the slider to increase the micro level and each line at least 75.
  8. Click OK.

  Step 3: Configuring the settings of Windows registry

  By default, Windows Vista automatically activates microphones and line-in ports. Use the following steps to set the microphone/line-in port to be the default port and configure the logging levels.

  1. If the recording in the Audio window tab is not selected, open the sound and click therecording tab and make sure the State is defined as below.

  1 - port microphone - work and set as default

  2 - line In - work

  3. digital (S/PDIF port) In - work

  4 - stereo Mix (mixer software) - disabled

  1. If several microphones or line - in ports are available, select the port you want to use. Clickset as default to make this device default audio input device.
  2. If the device you want to use contains a small circle with an arrow pointing down, the device is disabled. To activate the device, right click on the device name and selectActivate.
  3. With the selected device, click Properties, and then click thelevels tab.
  4. Adjust the slider until 75% of its range.
  5. If the mute is enabled, click the button mute to reactivate the device. The mute button should show as a blue speaker without any red circle.
  6. If the Microphone Boost is available, adjust to dB + 20.0.
  7. Click OK to make the changes.
  8. Test the microphone as was done in step 1 to determine if Windows is able to detect a signal from the microphone or line used. If you have completed all the steps and the microphone or the source device still does not work, the audio ports or the computer's sound hardware can be bad.

  You can also check the KB Article link for reference:

  Tips for solving common audio problems:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• level of the low internal microphone for inspirion1720

  Hello. I got 1720 sound sigma such hd.
  Today, I had a problem with Skype, and then my daughter week hear me.
  I found that set internal microphone has too low and I can't do more. I had to scream to be heard!
  so I found a newer version of the driver from dell support and description told fix micro level.
  but this driver will not install error message display. and she also kill the current driver. I so reinstall to return her.

  what I do is not not a lame user? can you provide me with a good pilot?

  Here is a link to the driver download page:
  http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R167846&SystemID=INS_PNT_PM_1720&servicetag=&os=WLH&osl=en&deviceid=8907&devlib=0&typecnt=0&vercnt=2&catid=-1&impid=-1&formatcnt=1&libid=3&fileid=227493

  Message edited by dub - UK on 08/02/2008 03:40
  
  

• Captivate Quiz rear function 9 Mac does not

  I created a quiz and check the back but when I play a preview of the back button has no effect. The next button is also hesitant, or simply suspended

  It's a random quiz with 10 questions pools - this looks ok

  I have edited the following buttons and return to accompany the rest of the presentation

  users have infinite attempts to pass the test

  "Back" button is desperate :-(

  My most visited blog is this one: the Question slides in Captivate - Captivate blog

  It turns out that you're not the only confused by Quizzing functionality. ATTENTION: This was written for versions before 9. 9 there are important changes, one of them being that it is so more confusion between Skip and, secondly, because 9 dedicated buttons during review (Back and Next). I should update a lot of blog posts, but the time is always the problem.

  As for your other questions, I have recently set a course with similar requirements. Pass mark was set at 100%!

  I took this approach (but that means out of navigation between slides of question and prevent that users can freely navigate the slides in question):

  1. Set the number of attempts on micro level Question
  2. On question slides you keep only the submit button and, possibly, the "Clear" button (only effect before submitting)
  3. Uncheck navigation back in Quiz preferences
  4. Check the option 'hide PlayBar during Quiz' If you use a bar of reading (but I recommend browsing custom, or at least disable the progress bar or use a technique to avoid rubbing this progress bar).

  With this configuration, the user must answer each question correctly before being able to advance to the next question.

  Quiz level in this case you must only an attempt.

  This is not your current configuration, you can specify what is the pass mark? You are aware of the fact that when you offer multiple attempts on Quiz level, this Retake Quiz button on the slide to score will reset all responses, not only the wrong answers? Depending on the number of questions, this can be even more frustrating than having to answer each question correctly.

  This scenario would be:

  • Allow one (or maybe two) attempts at the level of the Question
  • Allow multiple attempts on Quiz level and have the button on the slide to score. You speak review no, but read my blog post about the confusion between the recovery and examination.
  • Set the action to success on Quiz level to go to last slide (not to keep score as last slide slide) where you provide a close button.
  • If you want to give a course button recovery so that button recovery by default (for the quiz), you will need to create a form button, only the custom button allowed on a slide of score (see: buttons on slides of Question/Score of Captivate 6?-Captivate blog )

• What are the ranks for each zoom control

  I want to make sure that websites are accessible to 200%, as required by the WCAG. How much time do I need to repeat the 'increase zoom' to reach 200%? It would also be useful to know what extra step each Ctrl + [+] to get.

  Thanks for any help you can give.

  Oh, I should mention that you can move the zoom controls in the Panel of the menu on the toolbar for easier reading at-a-glance.

  Near the top of the Panel "3-bar" menu, you will see something like:

  - | 100% | +
  

  To move at the end of the toolbar, right-click and choose move from the toolbar.

  To move it to another location in the toolbar, use the customization feature. See: Customize Firefox commands, buttons, and toolbars.

  However, when you read the percentage on that zoom level reset button in the Center, keep in mind that that is compared to your zoom level base and the history itself.

• How can I change my options of hijacked search defalt back to normal?

  In recent days, I noticed that my search engine by default, on the Firefox homepage as well as on the search bar, has been changed to Yahoo. I changed the two back only to find that the settings reset themselves every time the browser is closed.

  Since then, I have traveled dozens of sons to help in the other forums looking for a solution. Nothing works. I checked the yahoo software and AVG, I started in safe mode, I disabled plugins and Add-ons, suspect I deleted unwanted in the browser and hard disk search options. No dice.

  I want to know how to change my default search to google engine.

  For those who have similar problems, it seems that the culprit was a program called SearchSettings.exe that was running in the background on my computer. The program is often part of a set of search bar. In the case of my machine, however, the search bar is not installed and therefore appear in my browser does not add ons or my Add/Remove Programs menu.

• MacBook pro locked with a password of the firmware, Help!

  I have a macbook pro, end 2011, which is locked with a password of the firmware, and I do not know. Are their any of you know how powerful hardware hacks, and no one knows a way of hacking the firmware lock? I tried to avoide paying someone to fix my machine and unlock the firmware, then I tried a lot of material tweeks likely to pass the lock of the firmware and unlock my computer. Please help and thanks in advance for all this you find to do it yourself Tech who would rather their firmware password reset themselves. Thank you.

  See this article:

  http://osxdaily.com/2015/01/28/forgot-Mac-firmware-password-what-now/

• Headset low volume on Tecra R850-151

  I recently brought + Logitech stereo Headset H110 + for my Toshiba Tecra R850-151 +. + I used a + 3.5 mm 4 Pin to 2 x 3 Pin 3.5 mm Headset Splitter Adapter + to connect.

  The headset works correctly because I tried with another computer.
  And with my Tecra R850 headphones work properly.

  Now, the problem is that the microphone is not recognized with sufficient volume.
  Speech recognition works at halfway green bar goes back very slightly when I speak through the headset, but does not recognize my voice. In advanced options, I tried to change the properties of micro increasing the micro level + up to 100 + and + level of Amplification + dB + 30.0, but still helmet did not properly recognize my speech.

  If someone could help me I would be grateful.

  Hello

  Have you already checked the Realtek HD audio Manager located in the control panel?
  There are various tabs like speakers or Microphone.

  I recommend the microphone tab where you can find different parameters such as the recording level and reading level.

  You can also activate the remove noise that is also part of the mic

• Your technical support does not recoginize my product code.

  Microphone is not recognized by VISTA - on map 2 & 4 microphone. It's a VISTA issue. Just got new PC from Cyberpower PC in April 2009. Very disappointed that Microsoft is ready to scrap VISTA - would be to wait. I've done a clean install twice. You won't anymore. I am a holder of shares - ready to drop you & Mac in the future.

  Hello Danquinnelly

  Please write to the Microsoft Forums.

  To help you better, please answer the following questions

  1. What is the brand name of the Microphone?

  2. do you have this problem with another computer?

  3. have you checked if the Windows Logo is compatible with Windows Vista when installing the drivers?

  4. have you tried reinstalling the drivers?

  It seems that the microphone is not properly configured on your computer. You can try to solve the problems more microphone/line-in following the steps, in order, to test, check the connections and the hardware, update the audio drivers and configure the audio settings of Windows. If you follow these steps in the correct order, you will fix the problem or you will find that the audio software must be configured or updated.

  Step 1: Test of an audio signal

  1. click on Start, then Control Panel.

  2. click on hardware and soundand then click manage audio devices...

  3. click on the recording tab.

  4. to test the microphone, speak into it. To test the line, send a signal to the line at the port of devices audio source (press play on the audio player). Look at the gray bars next to the name of the device under the recording tab:

  (A). If the gray bars next to the device name turns green, this device is active and an audio signal is passed through port microphone or line-in. This step shows that this problem is related to sound parameters in the software that uses the microphone. If you have not already done so, set the device selected by default and adjust levels. Once the device is set by default and levels are defined, use and adjust the sound recording or voice carrying software.

  (B) if the gray bars remain inactive and grey, the device does not have a signal. Leave the record open tab and go to the next step.

  Step 2: Check the volume levels and mute

  The volume of the speaker to the microphone and line - in may be activated or rejected. Use the following steps to check the volume of speaker for line and microphone levels.

  1. click on Startand then click Control Panel.

  2. click on hardware and sound.

  3. click on her.

  4. Select speakers, and then click Properties.

  5. click on the levels tab.

  6. click the button of Muted next to Microphone and on any other line that is cut.

  7. use the slider to increase the micro level and each line at least 75.

  8. click on OK.

  Step 3: Update the audio drivers

  You can see a front-end port microphone does not work, a recording device is missing in the recording tab, a microphone is not recognized when it is plugged in, or any other problem. There may be updates audio drivers that can solve this kind of problem. Use the following steps to ensure that the audio drivers are up to date.

  1. connect to the Internet.

  2. click on Startand enter the Device Manager in the start search field.

  3. click on the plus sign next to sound, video and game controllers.

  4. right click on the name of the sound material, and then select Update driver software....

  5. click search automatically for updated driver and wait for Windows to update the driver software.

  6 Windows checks a remote Web site to see if the update of the driver software is available.

  A. Si an update is available, let Windows install the update.

  Si an update is not available, proceed to the next step.

  7. once the update is successfully installed, test the microphone or line like that was made in step 1. If the problem persists, proceed to the next step.

  Step 4: Configuration of Windows registry settings

  By default, Windows Vista automatically activates microphones and line-in ports. Use the following steps to set the microphone/line-in port to be the default port and configure the logging levels.

  1. If the recording in the Audio window tab is not selected, open the sound and click the recording tab and make sure the State is defined as below.

  (- Port micro - A work) and set as default

  (B) - Line In - work

  (C) - Digital (port S/PDIF) - work

  (D) - stereo mix (mixer software) - disabled

  2. If several microphones or line - in ports are available, select the port you want to use. Click set as default to make this device default audio input device.

  3. If the device you want to use contains a small circle with an arrow pointing down, the device is disabled. To activate the device, right click on the device name and select Activate.

  4. with the selected device, click Properties, and then click the levels tab.

  5. adjust the slider up to 75% of its range.

  6. If the mute is enabled, click the button mute to reactivate the device. The mute button should show as a blue speaker without any red circle.

  7. If the Microphone Boost is available, adjust and + 20.0 dB.

  8. click OK to make the changes.

  9. test the microphone as was done in step 1 to determine if Windows is able to detect a signal from the microphone or line used.

  If you have completed all the steps and the microphone or the source device still does not work, the audio ports or the computer's sound hardware can be bad.

  It will be useful.

  Thank you and best regards,

  Dinesh

  Microsoft technical support

  Visit our Microsoft answers feedback Forum and let us know what you think

• World of Warcraft/Sims 3

  After installing Windows 7 my games keep resetting themselves.  Resolution, shortcuts keyboard, video settings etc etc. constantly return to their values by default whenever I open the games.  Sims 3 keeps trying to make me run the tutorial and warcraft wants me to go through the film use agreements, assignment of user name and domain every time I run the program.  The games are compatible, but somehting has clearly wrong. Is there a way I can fix without having to reinstall the games? Be it fixed if I take the time to reinstall?

  Kiara,
  When you installed Windows 7 do you have an upgrade or a new installation?  You run repair of Blizzard for WoW yet tool?  I would like to start by running the repair tool.  If you have upgraded to Windows 7 (or you have restored Sims3 from a backup) then I would re - install Sims 3.  Let us know the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to enable the microphe on?

  I want to keep the karaoke of microphe?

  Hello

  You receive an error message when you try to connect the microphone?

  Follow these steps and check.

   

  Test for an audio signal

  a. click on Start, then Control Panel.

  1. Click hardware and soundand then click manage audio devices...
  2. Click the recording tab.
  3. To test the microphone, speak into it. To test the line, send a signal to the line at the port of devices audio source (press play on the audio player). Look at the gray bars next to the name of the device under the recording tab:

  o If the gray bars next to the device name turns green, this device is active and an audio signal is passed through port microphone or line-in. This step shows that this problem is related to sound parameters in the software that uses the microphone. If you have not already done so, set the device selected by default and adjust levels. Once the device is set by default and levels are defined, use and adjust the sound recording or voice carrying software.

  o If the bars grey remains grey and inactive, the device does not recognize a signal. Leave the record open tab and go to the next step.

   

  Now, to check the levels of volume and mute

  The volume of the speaker to the microphone and line - in may be activated or rejected. Use the following steps to check the volume of speaker for line and microphone levels.

  a. click Startand then click Control Panel.

  1. Click hardware and sound.
  2. Click sound.
  3. Select speakersand then click Properties.
  4. Click the levels tab.
  5. Click on any line that is cut and Muted next to Microphone button.
  6. Use the slider to increase the micro level and each line at least 75.
  7. Click OK.

  Connect one microphone, music player or other audio device to your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

   

  Thank you

• Ventrilo and Microphone does not.

  Cannot enable DirectSound for the selected device.
  DirectSoundCaptureCreate failed. HR = DSERR_NODRIVER. No sound driver is available for use

  That's what I get when I open Ventrilo. Any suggestions on where to find the driver, I need to get this working?

  Hello Reetz,

  Thank you for writing to Microsoft Vista Community Forums.

  1. ensure that your audio drivers are correctly installed and up-to-date.
  2. in some cases, the drivers are properly installed and the error persists, open teamspeak, go into the settings menu and open the 'Options '.
  3. in the "Sound Devices" tab, change the audio of 'Wave' driver if it was set to 'Direct3dSound' and change to "Direct3dSound" if it has been set to 'Wave' and then press 'Ok '. Close teamspeak and reopen it.

  You can also browse the links for more information on ventrilo and try to contact them if the problem persists.
  http://www.Ventrilo.com/FAQ.php
  http://www.Ventrilo.com/about.php
  http://www.Ventrilo.com/dlprod.php?id=1

  Also, follow the steps below to check if the Microphone is properly configured and enabled in Vista.

  Step 1: Test of an audio signal
  1. click on start, then Control Panel.
  2. click on hardware and sound and then click on manage audio devices...
  3. click on the recording tab.
  4. to test the microphone, speak into it. To test the line, send a signal to the line at the port of devices audio source (press play on the audio player). Look at the gray bars next to the name of the device under the recording tab:
  * If the gray bars next to the device name turns green, this device is active and an audio signal is passed through the microphone or line-in port. This step shows that this problem is related to sound parameters in the software that uses the microphone. If you have not already done so, set the device selected by default and adjust levels. Once the device is set by default and levels are defined, use and adjust the sound recording or voice carrying software.
  * If the gray bars remain inactive and grey, the device does not have a signal. Leave the record open tab and go to the next step.

  Step 2: Check the volume levels and mute
  The volume of the speaker to the microphone and line - in may be activated or rejected. Use the following steps to check the volume of speaker for line and microphone levels.
  1. click on start and then click Control Panel.
  2. click on hardware and sound.
  3. click on sound.
  4. Select speakers, and then click Properties.
  5. click on the levels tab.
  6. click the button mute Microphone and on any other line that is cut.
  7. use the slider to increase the micro level and each line at least 75.
  8. click on OK.

  Step 3: Update the audio drivers
  You can see a front-end port microphone does not work, a recording device is missing in the recording tab, a microphone is not recognized when it is plugged in, or any other problem. There may be updates audio drivers that can solve this kind of problem. Use the following steps to ensure that the audio drivers are up to date.
  1. connect to the Internet.
  2. click on start and enter the Device Manager in the start search field.
  3. click on the plus sign next to sound, video and game controllers.
  4. right click on the name of the sound material and select software update of the driver...
  5. click on search automatically for a driver updated and wait for Windows to update the driver software.
  6 Windows checks a remote Web site to see if the update of the driver software is available.
  * If an update is available, let Windows install the update.
  * If an update is not available, proceed to the next step.
  7. once the update is successfully installed, test the microphone or line like that was made in step 1. If the problem persists, proceed to the next step.

  Step 4: Configuration of Windows registry settings
  By default, Windows Vista automatically activates microphones and line-in ports. Use the following steps to set the microphone/line-in port to be the default port and configure the logging levels.
  1. If the recording in the Audio window tab is not selected, open the sound and click the recording tab and make sure the State is defined as below.
  a - port micro - work and set as default
  b - line In - work
  c - Digital (S/PDIF port) In - work
  d stereo Mix (mixer software) - disabled
  2. If several microphones or line - in ports are available, select the port you want to use. Click on set as default to make this device default audio input device.
  3. If the device you want to use contains a small circle with an arrow pointing down, the device is disabled. To activate the device, right-click the device name, and then select activate.
  4. with the selected device, click Properties, and then click the levels tab.
  5. adjust the slider up to 75% of its range.
  6. If the mute is enabled, click the button mute to reactivate the device. The mute button should show as a blue speaker without any red circle.
  7. If the Microphone Boost is available, adjust and + 20.0 dB.
  8. click OK to make the changes.
  9. test the microphone as was done in step 1 to determine if Windows is able to detect a signal from the microphone or line used. If you have completed all the steps and the microphone or the source device still does not work, the audio ports or the computer's sound hardware can be bad.

  If the problem persists, contact us return with details below?
  1 microphone working on the computer at any time earlier?
  2. Since when are you facing the issue?
  3. don't you make changes to the computer until this problem occurred?
  4. the version of Ventrilo you use on your computer.

  It will be useful.

  Thank you and best regards,

  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think