Headset low volume on Tecra R850-151

Similar Questions

• Tecra R850-151 and low screen resolution

  Good afternoon

  I contact you for realizaros a technical issue concerning a model of Toshiba Tecra R850-151, part no 8b112605h PT525E and the serial number.

  I explain the scenario.

  I installed the laptop in a docking station, this one monitor, keyboard and mouse, I installed the driver downloaded from your site for this model of laptop and operating system and you have set up in screen Intel Graphics and Multimedia Control Panel of operation mode screens clones both screens in resolution 800 x 600 and respect me as an administrator entering the mode of operation of the screen and the resolution the bug is when I have access to the system with another user without administrative privileges, in this case the resolution does not respect me and sometimes not the mode of operation of the screens.

  Please faciliteis a solution to this problem because it is essential that the resolution on both screens and the problem is that entering the system with another user respect me when I accepted the turnstile as an administrator resolution and if I change the theme of the screens or judgment as a user when I turned off the computer and turn it on again you ignore the turnstile. Moreover, I installed the OS twice now and the error persists, and I installed the latest driver that you have on the Web, and before as well and always the same.

  A welcome message.

  Hello

  Did you notice this if you want to use the image of preinstalled Toshiba?
  Retrieve the laptop to factory settings by using the HARD drive recovery and test again.

• Driver for Tecra R850 SCCM packages / R950 series

  Hi all

  We need a package of drivers for SCCM, we have different models and series, for example:
  TECRA R850-151, R850-1J5 TECRA, TECRA R950 - 11 H, etc.

  Where downloads of this package of?

  Concerning

  Hello

  European notebook clean series, Toshiba provides drivers to download on their Toshiba UE driver page:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp

  If you need a driver SCCM packge, I recommend you to check this page from Toshiba:
  http://www.Toshiba.EU/services/on-demand/business-computing/sdp120gs-v/

  This package provides device drivers and tools for your professional Toshiba laptop, so that you can deploy Windows with Microsoft System Center Configuration Manager (SCCM) images by the import of this package.

  For a service, please contact * projectmanagement. [email protected] *.

• Tecra A3 has very low volume

  Hi all, I bought a used Tecra A3. With Win XP Professional, service pack 3. I have not all records with him.
  It was working well before a week or two ago. It has very low volume, I have all levels of volume and the maximum wave. The manual volume knob on the front has no effect, it used to work
  I think the problem started when I downloaded youtube FLV files, then I downloaded a program ('super' was the name of the program) to convert the FLV files into AVI files.
  I uninstalled the program of conversion, I failed to convert anything. I've uninstalled and reinstalled the driver of sound card - card his Realtech AC97. I uninstalled and reinstalled WMP11. None of this has helped.

  On this view, I saw how to do a system restore. I thought to perform the system recovery can solve the problem.
  My question is, if I perform the system recovery, to the GET to the elimination of the parameters of the box, it will clear the WIN XP operating system?

  Thanks for any assistance received, Darren.

  Hello Darren

  Please do not be angry on me, but make you it so complicated. Let's be clear on this:

  Saved on DVD of recovery recovery image contains the operating system, all necessary drivers, Toshiba tools and utilities and some additional applications such as a DVD player. So if you want to install the OS by using Toshiba recovery media will be deleted all content saved on the HDD, formatted partitions and lately OS will be installed. When all is finished you will have clean operating system preinstalled. It will be the same State as the first day after the default purchase.

  Then I don't understand what you mean now with the restore process. During the installation of recovery is complete you must not install or configure anything. Just boot OS, install your favorite software, install the Microsoft updates and be happy.

  If you have any other questions please post again, but please if you ask something to be clear and precise.

• low volume in the 6s iphone call

  I bought the new iphone 64 GB 6s in the last week and noted that the volume of the earpiece is quite low.i can't hear calls properly.volume is ok with hands-free bluetooth and speaker kit and only has problem with earphone. I checked all the settings but nothing is useful, then please help as I am very bored with the poor performance of the phone.i follows adjustments, but nothing has worked for me

  1. activate the hearig

  2. verified volume options

  3 restart my phone

  4. the latest software is already installed

  If anyone has a solution please share otherwise I think back to the android phone that I expected this question in the iphone.

  Hello aghaffar16,

  Thank you for using communities Support from Apple!

  It is my understanding that you experience low volume from your iPhone using a headset.  It is certainly not expected behavior.

  Looks like you have already made a good troubleshooting.  The next thing I would do is try another headset and see if the results are the same.  As obvious as it may seem, remember that the headphone is plugged all the way to the iPhone.  Don't forget to turn up the volume while you are actually on a call.  When not online, the volume allows you to control the music, alerts and other sounds on the iPhone, but not the volume of calls.

  More information on what to do if trouble hearing a call can be found here:

  If you do not hear a person on an appeal or a voice message or if the sound is not clear on your iPhone

  See you soon!

• Tecra A3-151 - Realtek AC 97 no sound

  Bought a 'cleaned' Tecra A3-151 (from a reliable source, bought several wiped own laptops from them before with no problems) installed Windows XP on it for a particular use, but despite my efforts produced no sound.

  Everything indicates that the sound card works - volume icon showing on the taskbar, audio tracks showing that 'play' in media player but no sound through the speakers or headphones. All drivers are showing as properly installed and any drivers missing. I uninstalled and reinstalled, is taking the usual power and by removing battery and obvious controls on audio controls (mute etc.)

  I would like to get it operational and would be grateful for any help/suggestions.

  Thanks in advance :-)

  My A3 sound worked until I did a Windows reinstall. Used dirvers "realtek". Power led on the speaker is on a port audio disconnect/reconnect on the front of the A3 gives a crackle every time so to my way of thinking the sound side should work. Even tried an external sound card.

  As the sound was working upward until the reinstallation of Windows, well, I'm no techo by a long shot but he didn't gave me no pleasure that someone else has the same problem and I feel will be the same difficulty.

• Tecra R850-520 - noisy fan - no cpu load - Win7 and Win8 64bits

  Hello. I got the Tecra R850-520 4 months. from the beginning, I have the same problem - noisy fan but no load cpu (about 2-4%) using win7 and win8 64bits

  I tried to change the windows profile to optimize or energy saving. but I still get the fan noise. Set the bios to 3.90. I have re-checked windows 8. and always the pleasure is strong. When no cpu is used.

  Notepad is cool - so I don't know where is the problem. It's probably bad driver for ACPI or for measuring the temperature. I tried to change the position of the laptop - and I found two metal plate on the bottom.

  I think that it is a measure of temperature sensors. When I flip the laptop, and the plates are "we air ', not touched by any material - the fan will slow down in a few minutes.

  Could someone tell if no pleasure of speed will work? or maybe Toshiba updates the bios or drivers for it eventually?
  Comfort for laptops of business is very bad. I SDS - and this is also limited. I didn't assume that Toshiba will sell such a sh...

  If someone could have some drivers or set which will slow down the fan under 64-bit windows?

  T.

  Hello

  You can set Windows Power plan settings in order to improve the cooling system.

  
  Changes in the operating system:
  --> Power Options control panel--> change the parameters of plan--> change power avancΘs--> TOSHIBA Power Saver Settings--> cooling method

  Changes in the Bios (power management):
  Intel Turbo boost Technology

  Changes in the operating system:
  TOSHIBA HW Setup--> the CPU frequency mode

  Try this settings:
  Plan (Toshiba power save) optimised battery
  Technology Intel Turbo Boost (BIOS) - disable
  The CPU always low frequency

  From my experience, this should reduce the noise.

• low volume on iphone call 6

  Dear Sir

  I own my iPhone 6 last year and she has completed the warranty

  While.on is am.adjust too low volume level and also on request your Apple supports.

  What to do please help me

  Hi, this may help.

  Increase the volume

  While you are online, the volume with the volume buttons. Make sure that you see the on-screen volume indicator when you press the volume buttons.

  Check the connections

  If your iPhone is connected to a headset, you will not be able to hear through the receiver using speaker or the iPhone. Follow these steps, after each.

  1. Make sure you have nothing plugged into the headphone jack or the dock connector.
  2. Go to settings > Bluetooth and turn Bluetooth off.

  Turn off the receiver

  The receiver of the iPhone will not work properly if it is blocked or dirty. Follow these steps, after each:

  • Make sure that nothing is blocking the receiver, such as a case or a movie.
    If you have a new iPhone, remove the plastic on the front and the rear of the unit.
  • Check the receiver opening to see if it is blocked or dirty. If necessary, clean the receiver opening with a clean brush, dry, soft.
  • While you're online, turn on the speaker. If you still do not hear, then your network or the reception might be the issue. Try calling again later or somewhere else.

  

  Check the receiver

  Follow these steps to see if the problem is with your receiver or your network:

  1. Open the dictaphone application and record an audio clip.
  2. Type in the upper right corner of your screen to switch playback between the speaker and the receiver.
  3. Press on to play the voice memo by the receiver on your device.
  4. If you hear the voice memo and it seems normal (without distortion, crackling or static), there might be a problem with your network or carrier voicemail system. If you still hear no sound good or bad quality, contact The Apple support.

  

  Update and reboot

  1. Restart your iPhone and the test again.
  2. If there is still no good or bad sound quality, update to the latest version of iOS.

  http://support.Apple.com/kb/TS1630

• LifeChat LX-3000 low Volume at startup, requires a reboot

  I bought the LifeChat LX-3000 2 weeks, and it worked fine until 2 days ago. Initially, the volume started fluctuating. I restarted the computer, that fixed it. Then the helmet itself set to a very low volume of base, so when the volume control on the PC is in full I can barely hear. To resolve this problem, I had to uninstall the software and the headset to the Device Manager, restart the computer and reinstall. This again once solved the problem. However, the volume is now very low again. I don't want to have to keep restarting just to use the earpiece. Any ideas?

  Well, everything seems to work fine now. I think that's not as when I start the computer with the headphones plugged, but thanks for the help, she will keep noted if he plays again up.

• Getting low volume

  Original title: still too weak volum

  When all that can be rotated upward and the volume is still too low... anyone know what MS is going to solve this problem? Seems to be a big problem and as many bugs online by users, most of which is diving in install something else or do something the old way via old drivers.   Have they not still used us as guinea pigs enough a long time to get the information they need to solve this problem? I waited until today to upgrade and wish I would have waited longer and not fell victim to their... Get it now free or paid ads later.

  Using headphones with Win8 was comfortable around 12-14... It's comparable to about 4-5 level on Win8 with Win10 to 100. Without headphones, the level is about 2 - 3, which is crazy and unacceptable.  Where is the best place to report?

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, you are facing problem with low volume on your system.

  I would be grateful if you can provide us with the following information to help us better understand the issue:

  • Did you the latest changes on your system prior to this problem?
  • This problem occurs when you use headphones?

  I suggest to follow the methods below and check if that helps.

  Method 1:

  Check volume settings. Follow these steps:

  a. right click on the speaker icon in the taskbar, then select volume control options.

  b. put a check mark on "all devices evolving sound.

  c. make sure you have "Default uncontrolled communication device".

  d. place a check on the speakers.

  If the problem persists, try Method 2,

  Method 2: Troubleshooting Audio run:

  It search common problems with your volume settings, your sound card or driver and your speakers or a headset.

  Open the troubleshooting of Audio playback and check if the problem occurs:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  If the question did not resolve, try Method 3,

  Method 3: Please refer to the article below and check if that helps

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  If the problem remains try Method 4,

  Method 4:

  Uninstall and reinstall the audio drivers completely as follows:

  a. click Start, type Device Manager in the Start Search box and press ENTER.

  b. click continue. The Device Manager dialog box appears.

  c. If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  d. in r management device, right click on audio and its driver and click on uninstall.

  e. restart your computer and Windows 7 will reinstall the audio drivers automatically.

  You can also go to the website of the manufacturer and try to install the latest available audio drivers and check if that helps.

  Hope this helps, if you need help on Windows let us know we will be happy to help you.

• Low volume, all cursors on max

  I have very low volume on the flash video in Firefox 9.0.1. All the volume sliders, including the mixer of Firefox and the video slider, are on the highest setting. They all work, but the maximum volume in Firefox is very low and normal elsewhere.

  Win7 64 bit
  Firefox in version 9.0.1
  Shockwave Flash plugin 11.1.102.55

  Did you also check the volume control for the process of plugin-container?

  Try to erase cookies Flash (LSO) and settings.

  Flash Website storage settings panel:

  • http://www.Macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html

  Global storage settings panel:

  • http://www.Macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html

• Known problems with Tecra R850?

  I am considering buying a laptop Toshiba Tecra R850, in 2011, and although it's been refurbished by a reputable local computer company (and comes with a 3 month warranty) I would like to know if there were known issues with this particular model. The other main specification with this laptop is that it's i5 2520 M 2.5 GHz. 4 GB RAM, 320 GB HD
  Thanks in advance for any help.

  Someone there with useful answers?

• Tecra R850-147 - custom Flash work tool cards

  Hello

  I just downloaded new Windows 8 Professional 64 bit - English on MSDNA.
  I downloaded the drivers called Windows 8 - upgrade of

  official Toshiba site

  My question is. Why when im pressing 'fn' I can't see my screen tabs on top.

  Also I can not turn off by pressing the button on the top my touchpad (installed driver Touch Pad Driver)
  I also have the problem with the driver installation utility eco. (Eco Utility driver installed)

  Is Toshiba Tecra R850-147 PT520E

  Best regards and im waiting for quick replay.

  FN function work in general?
  What is the problem with the eco utility?

• Tecra R850-1EP - reinstallation of Windows 7 64 bit

  Hello

  I try to reinstall win 7 pro with a DVD 32/64-bit and instead to get a 64-bit edition
  A 32-bit edition is always translated by.
  He changed the hard drive for an ssd

  My Pc is a Tecra R850-1EP

  Tanks in advance

  According to specification for laptop, Tecra laptop shipped with Windows 7 Professional 64-bit operating system.
  I hope that you created the recovery DVDs using preinstalled Toshiba Recovery disk creator tool.
  This tool will create all bootable recovery with the original install disc, and it should be 64-bit so I do not understand how 32 bits can be installed on your machine.

  When you start the installation of recovery disc there is no option to choose between 32 and 64 bit OS, right?

• Tecra R850 starts when you open the lid

  Hello

  I recently bought a 2nd hand Toshiba Tecra R850.

  Is it normal for the laptop start loading Windows, open the lid?

  I always perform a clean shutdown when I won't be using the laptop - and I always waited to push the button to start.

  So is it normal for the laptop to start when I open the lid? Is there a substitution?

  Thank you
  Brian

  I can answer myself. I went to the BIOS and there is an option for the laptop to start automatically on opening the lid. I put this to disabled.