Micro SDHC not recognized Vista when the card is inserted in Sansa E250

Similar Questions

• Audio CD does not automatically play when the CD is inserted

  I have my settings set to read a CD automatically when the CD is inserted.  I insert an audio CD, and nothing happens.  No music.

  Hello

  Welcome to Windows Vista community responses.

  (1) made audio CD playback with Windows Media Player or any other third party software?

  (2) have you been able to use this feature before? If so what are the recent changes on the computer?

  Windows does not read the CD-Roma automatically if you only use the real-mode CD-ROM drivers. Protected mode drivers are called to play CD-ROMs automatically when you insert them into your CD-ROM drive.

  To manually change your auto CD play settings in Windows Vista

  1. open the control panel by going to the start menu.

  2. double-click on the default programs icon.

  Now choose the third setting down. Change AutoPlay settings.

  

  4. now you can choose which action to perform with which program.
  5. press on the drop-down menu to make your choice.

  

  Response please back and let us know if this helped with your question or let us know if you need more assistance.

  Kind regards
  Anthony
  Microsoft technical support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• [8510w] system shuts down / is not start when the card is inserted

  Hello
  my old 8510w developed a bad thing - when the power cord is inserted, system will shut down. Works fine on battery.
  Symptoms:

  1. stops when the power cord is inserted;
  2. does not start then on the power supply;
  3. charge led flashes in unusual ways - led is quite low, but gets a little more brilliant ca once per second;
  4. power led lights also dimmed down mode.

  I tried another adapter as well, so that should be good. I would like to know if this problem is known and could be repaired (quite easily), or there is no point to this end by like old computer as 8510w.

  -------------------------------
  8510w
  Debian Wheezy / Win7

  Measure the output voltage of the AC adapter does not prevent the failure of adapter to even the slightest charge.

  If the laptop will not start even with an identical power adapter connected and remove the battery, then it is very likely that the electric distribution/charging circuit on the map system of the laptop has a faulty component.  If you're a troubleshoting capableof until the component level and bulbs to solder you can fix the system board. Most people choose to replace the motherboard or laptop.

• USB not recognized - even when there is no USB devices at all the

  For a few days now, I get the message

  "USB device not recognized: one of the USB devices attached to this computer is not working properly." The device has not been recognised "."

  He keeps popping up in my right corner below, every 5 seconds if I don't click it. When I click on the message, I get a list of devices (ports) are available. There is an "unknown device". Maybe it has something to do with the (biometric) finger scan? This has not worked very well lately...

  Even when there is no single USB device installed (normally, I have a mouse and a Targus laptop cooling mat installed as USB devices), it keeps popping up. I tried to remove the USB port from the list (or uninstall) in the remote control, but it seems that it keeps happening.

  I got it all of a sudden, I have nothing specific to has not logged any strange devices (except for a spotlight on exit external screen, but this has nothing to do with USB). I also hear the sound for the connection / disconnection USB devics randomly when I'm on my laptop.

  Someone has an idea?

  Thank you

  HP Pavilion dv7 Notebook PC
  LE902EA #UUG

  Windows 7 64 bit

  I have disabled the root hubs, figured out that we caused now my mouse and other USB physical led to no longer working and that was allowed again.

  The one who gave the error message is now disabled and if the error message is no longer present.

  Result: (built in) cyberlink youcam and biometric no longer work. But at least the annoying message disappeared, so I guess I can live with that.

• How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you reconnect then wireless.

  problems with wireless Vista "local only".

  How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you then reconnect wireless... nothing else was changed on those computers and other devices can connect ok?

  Hello

  Each router is assigned to the specific address (called IP address or IP address). And each router maintains its own database (called as base of router) to follow the networking devices communicate with him. When the router is changed, the particular router is unable to detect the device, especially the network card to communicate with the computer.  Since he does not have details of the database of network devices, communicate with him.

  • You are able to access the Internet?

  Try the steps mentioned below and check:

  Method 1:

  Step 1: Enable or disable a network adapter and then check:

  http://Windows.Microsoft.com/en-CA/Windows-Vista/enable-or-disable-a-network-adapter

  Step 2: Run Network Diagnostic tool and check:

  Network connection issues: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Reference links:

  Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based: http://support.microsoft.com/kb/947041

  Setting up a wireless network: http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Connection to wireless with Windows Vista: http://technet.microsoft.com/en-us/library/bb878035.aspx

  Hope it works.

• Windows 7 and install/recognize the problems of printer HP LaserJet P2015 error - USB Device not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  Title: Windows 7 and install/recognize printer HP LaserJet P2015 teething problems...

  I have a dell inspiron that was originally windows Vista and I changed to windows7.  I have a LaserJet where I work, a HP LaserJet P2015 printer and when I plug in the USB, it says (peripheral USB not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  How and what should I do to get the printer going or to get the computer to recognize.  Installation CD will not work and I looked online and downloaded drivers but still the same thing.

  Hi LOliver,

  Method 1: Run the hardware and peripheral troubleshooting tool and check if it makes a difference.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Disconnect all USB (Universal Serial Bus) devices connected to the computer (unless your mouse and keyboard). Connect the printer and check to see if the problem persists.

  Method 3: Connect the printer to a different USB port and check.

  Method 4: Reinstall the USB (Universal Serial Bus) controllers.

   First of all, please disconnect all USB devices and then perform the following steps:

  (a) click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  (b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  (c) repeat step 2 to uninstall all items under 'USB Bus controllers'.

   

  Then, restart your computer and windows will automatically reinstall all USB controllers.

   

  HP printer drivers- ensure that you download the driver appropriate for your device model package.

   

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The Authentucated smart card user session is stopped airtight when the card is removed, regardless of httpd SSLSessionCacheTimeout (default 300) setting. Why?

  I installed safety device in the option tab / advanced ff. Then using smart cards to connect to my server. The smart card user is authenticated and secure connection goes smoothly. When the card is removed from the card reader, the connection is immediately interrupted, regardless the SSLSessionCacheTimeout settings. Mine is set to 300.

  I did the same thing with IE, it maintains the connection until the expiry of the SSLSessionCacheTimeout.

  It is characteristic of FF-specific-designed? Or do I FF browser-specific sth keep my secure connection based on the parameter SSLSessionCacheTimeout?

  Thank you

  Hey SecureDevPaty,

  I wonder if you have installed a cert in the side server or client-side.

  • Installation of the Module pkcs11 access card smart biometric security or external blinds. Click on this link for more information.
  • https://developer.Mozilla.org/en-us/d.../JavaScript_crypto
  • The command line, you can use the certutil tool NSS _ https://developer.mozilla.org/en-US/d.../NSS_tools: _certutil to manage certificates.

  I'm not an expert in the present, but these are the references that I found. I * think * after reading this session http://stackoverflow.com/questions/12.../session-disconnect-the-client-after-smart-card-is-removed LAA there is a feature of ssl in the about: config page. If you are looking for ssl, look at the features of trading. who, after having reread the thread we already did.

  I started to read more about the rules of ssl

  • http://blog.johnath.com/index.php/200.../Security-tidbits/
  • http://Tools.ietf.org/html/Draft-Friedl-TLS-applayerprotoneg-02

  and a few rfcs. My question is, the rule for timeout, is this set on the server? with a specific rule in the cert? If it is a basis of cert, I would ask stackoverflow.com

• Why am I suddenly "USB not recognized, one of the devices USB has malfunctioned and Windows does not recognize"

  Hi all. If anyone out there in Cyber Land can solve this problem for me so I've personally you will issue an eight-pack of ice-cold beer (or a bottle of wine for the ladies lol)...

  I'll try not to waffle too guys, so here's...

  Right my PC running Windows XP. I also have itunes installed on my PC (I have an iphone 4). Upward until yesterday my iphone and itunes were working well, (once I plugged my iphone in the itunes USB port recognised that my iphone was plugged and synchronization was fine etc.).

  But now when I plug my iphone to PC to sync with itunes, I get a pop up box on the lower right part of the screen that reads... "USB not recognized one of the USB devices has malfunctioned, and Windows does not recognize."

  After visiting about 5 different sites now "Ways to solve this problem", believe it or not, I still have the problem bloody! :(

  A site proposed shutdown PC and unplug it from the power supply, then plug it back start-up and back... this as did not work!
  The other they say that I should go to Device Manager, uninstall all the USBs then restart... it did not work either.
  Tried a system restore
  Tried to reinstall itunes

  When I check the names USB in Device Manager, there is one who reads unknown device. I am literally pulling what's left of my hair now. I tried to solve this problem for almost 2 days now and still no joy. That's why no matter what input you guys would be very appreciated. I'm no PC Wizard, so please, don't think you're patronizing me if you break down things step by step for me.

  Thank you comrades, cordially, Freddy frustrated. :)

  Another said I should go to Device Manager, uninstall all the USBs and restart.

  Usually, this works... but can be very dangerous, unless you have a PS/2 keyboard.

  I also assume that you have tried all other USB ports on the computer. tried a verified USB device (for example, a flash drive) in the USB usually when you plug in your iPhone. and I tried your iPhone in another computer (I know it's rare for an error message Windows really means what he says, but sometimes the material lacks).

  Is the charge of the iPhone when it is connected to the USB port (I don't think)?  This happened to me recently, but a reboot fixed it.  I guess that that happened to you.

  I guess that you don't see the error messages in Device Manager or you must declare them.

  You can uninstall all USB devices that do not exist as follows:

  • Open a command prompt window (start > run > cmd > OK)
  • Enter the following command and press enter

  Set devmgr_show_nonpresent_devices = 1

  • Start the Device Manager by typing the following in the same command prompt window

  devmgmt.msc

  • In Device Manager, click the view menu and select "Show hidden devices".
  • You should see a category just after "Non-Plug and Play drivers" named "other devices."  Chances are that there will be a big exclamation yellow mark beside it.  When you expand the "other devices" you should see several non identified "USB devices."  Uninstall all this.
  • Reboot (with the iPhone NOT connected).

• drive CD shows autoplay, autoplay shows cd drive, but does not open automatically when the cd or dvd is inserted

  drive CD shows autoplay, but does not open automatically when the cd or dvd is inserted

  original title: Watch autoplay cd player

  OK, got cha.
  Try this:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings
  b Eddie

• USB not recognized - even when there is no device at all (Windows 7, Pavilion dv7)

  For a few days now, I get the message

  "USB device not recognized: one of the USB devices attached to this computer is not working properly." The device has not been recognised "."

  He keeps popping up in my right corner below, every 5 seconds if I don't click it. When I click on the message, I get a list of devices (ports) are available. There is an "unknown device". Maybe it has something to do with the (biometric) finger scan? This has not worked very well lately...

  Even when there is no single USB device installed (normally, I have a mouse and a Targus laptop cooling mat installed as USB devices), it keeps popping up. I tried to remove the USB port from the list (or uninstall) in the remote control, but it seems that it keeps happening.

  I got it all of a sudden, I have nothing specific to has not logged any strange devices (except for a spotlight on exit external screen, but this has nothing to do with USB). I also hear the sound for the connection / disconnection USB devics randomly when I'm on my laptop.

  Someone has an idea?

  Thank you

  HP Pavilion dv7 Notebook PC
  LE902EA #UUG

  Windows 7 64 bit

  The solution can be found here

• my iphone 6 is not the Japan but still having a problem with his camera shttuer. sound is not being muted when the phone is silent. Help!

  my iphone 6 is not the Japan but still having a problem with his camera shttuer. sound is not being muted when the phone is silent. Help!

  The Japan is by far the only country where the shutter is forced to be on

• 3 TB Canvio Stor.E not recognized correctly in the USB 3.0 port

  I have four of the HDWC130EK3J1 external Stor.E Canvio Desktop HDDs.
  If more than one USB 3.0 drive is connected the partitions are not recognized.

  The GPT partitions are displayed as MBR partition protection.
  The MBR partitions are displayed as never applied.

  The drive is detected correctly after that he was to reinsert and close ofd.
  At the same time, only 1-3 partitions are recognized correctly.
  This problem can be reproduced 8.1 running Win and Win 7 64 bit using two different computers, by using the USB Intel and Nec controller.

  Currently, BIOS, update driver update. The HDDs are checked to find errors.
  Is there an update to flash ready or a replacement for the external hard drive option?
  Please note that a replacement with the same model makes no sense.

  My German Embassy has been blocked so I translated it. Sorry the only translator Google

  There could be a simple answer to this problem:
  There are two standards different MBR and GPT partitions.

  MBR works with drives up to 2 TB in size, but it can record handle t with more than 2 TB of space. MBR also only supports up to four primary partitions if you want more, you have to do one of your primary partitions an extended partition and create logical partitions inside.

  GPT (GUID Partition Table) is a new standard which replaced the MBR. The TPG requires UEFI. This standard isn't limited like MBR and readers can be much larger and size limits depends on the system and its file systems. It allows an almost unlimited amount of partitions.

  I guess that the system cannot recognize the partitions (from additional external HDD) due to the limitation of the MBR.

• for some reason any recently my habit of music automatically play when the cd is inserted in the central processing unit and I have the program windows vista

  How can I get my music to play automatically when the cd is inserted and I have windows vista premium program

  Solution to http://windows.microsoft.com/en-us/windows-vista/Change-AutoPlay-settings

  I hope this helps.
  Paul

• error message "coordinates would not be saved" when the contact info is correct.

  original title: error message

  "contact information could not be saved" when the contact info is correct.  Happens all the time on this computer

  You will need to create a new post on the Windows Live support for assistance site: http://windowslivehelp.com/forums.aspx?forumid=28aff142-9106-4d74-be08-9b5d9fc0efea

• printer do not wake off mode 'sleep' and does not turn off when the Start button / stop pressed or pushed.

  HP printer all-in-one B210a win 7 64 bit.

  no error message just don't wake up from power saving mode and does not turn off when the power button is pressed. must be disconnected and then turned back on. works fine until the power saving mode he did go to sleep then not answer the test print command or Toolbox controls.  power saving mode is turned off, but still goes to sleep.

  First, you will need to make sure that the printer is under warranty.  You can do it here.  So, if you are in warranty, you must contact HP at 1-800-474-6836 and the United States in computer science, international users click here.