Microphone is not working after upg Windows 10 TP yoga

Similar Questions

• Satellite P300-1This - Microphone does not work after installing Windows 7

  Hello world.

  At first, I'm sorry for my bad English, so I will say in no time.

  A few days ago, I removed a few programs, and I installed the new Windows 7 operating system. Everywhere I had to download the new drivers for the camera because they do not work. After you download the drivers of the camera, the camera become operative (YES!), but later worked for me, a built-in microphone was out of use. What may be of it with the cause and this driver to download and why the microphone not working?

  I can't talk with friends on Skype ;( Help me. I hope you know what I'm saying.

  Hello

  Do you really install any drivers after installing Windows 7? Maybe you have forgotten something and so it doesn t work.
  Micro is a part of webcam so be sure that driver webcam is properly installed and driver sound, you need to as well.

  After that, check the sound settings. Make sure that the Microphone is enabled and test it again with amp active microphone.

• Satellite P300 - Microphone is not working after installing Windows 7

  Hello

  I recently did a clean install of Windows 7 on my Satellite P300. The microphone has been fine with Vista but does not currently work with Windows 7.
  I tried to go to the sound section and it does not list the casting Mike - just struggling. Can anyone help?

  Thank you
  James

  Hello

  Maybe you didn't install the driver for the microphone? Therefore, you will need to install the driver for the webcam, because the microphone is a part of it. You can get it here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  After that, it should be possible to use the internal mic.

  By the way: internal what application you are using for the microphone? Skype or something?

• His Dell Inspiron 1420, microphone and camera integrated into the laptop does not work after installing Windows 7 Professional

  No sound from my Dell Inspiron 1420 and the microphone and built-in laptop camera do not work after installing Windows 7 Professional 64-bit. My laptop has Windows 7 Vista 32 - bit family premium. My laptop is 64-bit capable and after going through the Upgrade Advisor, I installed Windows 7 64-bit. I can hear sounds when I use a headset plugged into the line-in Jack, but not through the speakers built into the laptop. I already tried new drivers from the Dell website, but I could not find.

  Any help will be much appreciated. Thank you.

  As it is has no drivers 64 bit Windows 7 on Dell Web site, your best chance is to install the 64-bit versions of Vista (if they exist) in compatibility mode, viz:

  Right click on the Vista driver, then select Properties > Compatibility tab. Now choose to run the program in Vista compatibility mode and then apply > OK. Right click on the file and select run as administrator to install it.

• Microphone does not work after upgrade from Vista Home Premium to Win 7 Home Basic-Sony Vaio VGN-NS25G

  Microphone does not work after upgrade from Vista Home Premium to win 7 Home Basic Edition. Laptop model Sony Vaio VGN-NS25G, bought in India

  My built-in mic not working anymore after the upgrade from Vista Home Premium to win 7 Home Basic Edition. Model laptop Sony Vaio VGN-NS25G was bought in India. I have taken the loacl Sony Service Center and they said that Windows 7 drivers for the microphone Sony was not yet available. They mentioned that the only way to fix the problem was to upgrade to Vista. Is this true? Where can I get these drivers for the microphone, and they are not available, when will they be available?

  Hello

  Method 1.
  Interestingly, I found the drivers for Windows 7 for this particular model of Vaio. Here is link thye:
  http://www.Sony-Asia.com/support/download/362654/product/VGN-ns25g/sectionfirst?subpage=detail

  I suggest updating all your drivers from the link above and drivers Realtek especially.

  Method 2. Set the default Microphone.

  Once the drivers installed to check if the microphone is the default value, here's how:

  Exercise the functions mentioned below to adjust the Microphone as default:
  1. Click Start and click on Control Panel.
  2. click on sound, then a new window will open.
  3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.
  4. now check if the Microphone is listed there and right-click on it and choose activate.
  5. turn highlighted that Microphone and click "set as default".
   
  For more information see the articles below:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• VB 6 EXE compiled on the server (MS Server 2003) files does not work after restarting Windows 7.

  I work in the field environment.
  Some VB 6 EXE compiled on the server (MS Server 2003) files does not work after restarting Windows 7 PC (shortcut to the server).
  but it runs on the Windows XP computer.
  For example:-Inventory.exe (work), Sales.exe (does not work)
  Help, please.

  Hello

  I suggest you to ask your question at the following link.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

  I would also ask you to contact your IT Department for further explanations.

• NDAS services stopped and do not work after installing Windows 8

  Ladies and gentlemen,

  My Services of NDAS stopped and do not work after installing Windows 8. This is necessary to run my SUNGOO LAN hard drive.

  Does sb know what to do?

  Best regards, Rolf

  Hello

  If I understand correctly the NDAS (Network Direct Attached Storage) service has stopped working after the installation of Windows 8. Is this correct?

  Please provide additional information for a better understanding of the issue.

  1 are you faced with the question of the NDAS service on the computer having the hard disk SUNGOO?

  2. how many computers using the hard disk on LAN?

  Specify the computers with Windows 8.

  3 are the computers in a home group?

  Please post the information requested to receive specific troubleshooting steps.

  Other links

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/NDAs-error-wont-see-drive-after-Win7-install/a004b2a3-9dd4-48a1-9ce7-c289931ba17b

  Why Windows is not find my device?

  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  I hope this helps.

• Portege M800 - Microphone does not work after upgrade to Windows 7

  Hello world

  I have a Portege PPM81E and am unable to get the microphone not working after having upgraded to Windows 7.

  I tried all the drivers I could find, but no luck.

  Is there anyone out there with the solution?

  Thanks in advance!

  Just a few questions:
  You have upgraded original Hat version of Vista you have with your laptop or you have installed the clean version of Win7?
  All hardware components are correctly installed and listed in Device Manager?
  How do you test feature mic?
  Microphone is in the sound properties > recording devices?
  MIC is set as default device?

• L540: Microphone is not working after sleep 10 Windows

  I'm new in the thinkpad family and I recently had a L540.

  I decided to put my system with W10. My problem is that of the object.

  When the laptop awake the microphone does not work. It is recognized by Windows, but the cannot hear anything.

  I tried to reinstal the drivers or dissable the unit, but nothing.

  It only works after the restart.

  Any suggestion?

  Thanks in advance.

  Problem solved with the BIOS update!

  Thank you very much.

  Bests.

• X 220 microphone does not work after Windows 10

  Firstly, as far as I know, my upgrade to Windows 10 has worked very well and I love the new OS. The only problem I have is that my microphone does not work. It shows it as being installed and working properly, but I can't use it anywhere in the system. The driver is the Contexant 20672 SmartAudio HD.

  When I go to "Set up a microphone" is said "the wizard could not start. Make sure that your hardware is working properly and check your audio configuration in the control panel to control Audio devices and sound themes. »

  My microphone is turned on and the volume is growing.

  Any ideas?

  The same problem. I deleted the folder drivers\win\audio and loaded the drivers of Windows 7 instead of Windows 10 drivers from Lenovo site. Solved.

• Microphone is not working after the decommissioning of laptop Sony Vaio from Windows Vista to Windows XP

  Original title: I recently switched from windows vista to XP on my computer laptop SONY Vaio VGN-NS110E my microphone does not work. Driver audio realtek has been downloaded and it does not work. Please notify.
  
  See above

  Hi AmandaMwaramba,
   
  -Which program you want to use your microphone with?

   

  We will try to test with XP built in tool. Please follow the steps below to do the same.

  a. click on 'Start' > select 'Control panel' > double-click "sounds and Audio devices".

  b. Select the "voice" tab > under default device which device do you see? > Click on "material Test".

   

  If you get no sound, change your default device that I mentioned above, the parameter may be wrong.

   

  For more information, see:

  To set up a microphone

• Venue 11 7140 pro micro HDMI does not work after upgrade windows 10

  Has anyone tried connect a HDMI microphone on their place of dell 11 7140 pro after windows 10 upgrade? Mine does not work after the upgrade, but the HDMI from the dock works.

  I have thus display driver problems on 10 to win.

  For me, the micro HDMI port works fine. I use an active adapter, so that could make a difference.

  The HDMI on the dock works well, but only if I directly connect to an HDMI display. If I try to use a passive DVI adapter, then the external screen is not recognized. In addition, the DisplayPort on the wharf is also unnecessary, regardless of the type of cable or attached monitor.

  I encounter this problem after performing a new installation of Win 10, using the brand Dell drivers and latest drivers Intel installed by Windows update.

  It is certainly a driver problem Win 10 because everything works fine if I boot the Tablet under Linux using a USB key.

• Stream HP X 360: touchscreen does not work after updating windows on HP Stream 10 x 360

  Hello

  I have a problem with my HP Jet x 360 after doing the update of windows 10. Seems that there are no drivers for touch screen in windows 10 again, even a generic driver.

  I checked the Device Manager and found 6 Uknown devices with no driver.

  I installed the HP support Assistant, but found no driver. Windows Update No.

  Under Human Interface devices group I can't see the touch screen and in the settings app is also absent.

  I also checked the diagnostic tool in the BIOS, but the touch screen works very well.

  Please help me!

  Thanks four your help.

  You can correct the touchsreen windows version 8.1 of 'Serial IO driver without connected sleep Support Intel'. As someone discovered in this treat: http://h30434.www3.hp.com/t5/Notebook-Hardware/touch-screen-on-stream-11-x360-not-working-after-windows-10/td-p/5188892

  You can find the driver here under pilot-Graphis-Intel: http://support.hp.com/us-en/drivers/selfservice/HP-Stream-x360-Convertible-PC/7439377/model/7579371#Z7_3054ICK0KGTE30AQO5O3KA30R1

  However this does rest not correct the prolbem completely! The Touschreen works but not the accelorometer. I hope HP suport can provide some real suport at some point and release drivers that make accelometer works in windows 10.

• HP Laserjet 2100 does not work after upgrade Windows 10

  HP Laserjet 2100 does not work after upgrade to Windows 10. Tried using PCL 5, PCL 6 and also tried the HP Universal print driver. I agree, this is an old printer, but I am disappointed told me "the printer is in error" when I try to print after this upgrade. Worked fine on Windows 7...

  Thank you!

  If the printer is connected using a parallel printer cable, please see the link below for the solution.

  http://h30434.www3.HP.com/T5/LaserJet-printing/possible-solution-to-LPT-port-issues-with-Windows-10-upgrade/TD-p/5372582

• Internet, printers, and other devices does not work after recent windows upgrade

  After a recent windows update automatic, I can't get online, print or use other network devices.  The unit of the internet connects very well and both Mozilla and Internet Explorer from fine, but cannot 'find' network.  The printer driver is installed, but the programs can not find the driver.

  Hello

  1. have you made changes on the computer recently?

  Method 1.
  If you use a connection please check the internet connection by cable if you face the same problem when working in mode safe mode with networking.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Vista Advanced Boot Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to boot mode safe mode of Windows Vistsa with networking.
  e. when Windows starts, use check and Internet explore if the problem persists.

  For more information, see the articles below.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode

  If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  Method 2.
  Also I would ask you to put all the drivers of material from the manufacturer's Web site and check.
  For more information, see the articles below.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  I hope this helps.