microphone making a splashing sound

I need help with a problem of adjustment of the microphone

Hello

  • What version of Windows operating system do you use?
  • What is the make and mode of the Microphone?

You can view these methods:

Method 1:

I suggest you try to connect your microphone with the other computer and check.

Method 2:

Tips for solving common audio problems

http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

Tags: Windows

Similar Questions

  • my computer keeps making a clicking sound

    My computer keeps making a clicking sound.

    Hello erikhillary,

    Where the clicks coming from?

    When did start?  There were events that preceded it?

    It may be wise to perform hardware diagnostics on the machine are provided by the hardware manufacturer.

    Let know us and we will continue from there.

    Best regards

    Matthew_Ha

  • Webcam with integrated microphone. Very low sound MIC, but also an ai Genius separated from the webcam microphone. How do we install the additional microphone?

    Webcam with integrated microphone.

    Webcam with integrated microphone. Very low sound MIC, but also an ai Genius separated from the webcam microphone. How do we install the additional microphone? more details on settings please

    to check your setting first:

    Right click the speaker icon in the notification area and choose: Adjust Audio properties.

    Or: Control Panel, sounds and Audio devices.

    Volume tab: click Advanced under Speaker settings and open the drop-down list for the speaker setup and choose your speakers, click on apply.

    Click the performance tab and move the sliders to the complete and best, click OK.

    According to the Volume of the device, click Advanced.

    On the page of the Volume control, click Options in the menu, click Properties.

    Mixing should be your system and not one of your pickups.

    With reading selected all the check boxes.

    Click record, peripheral mixing system, check all the boxes.

    Click play again, and then click OK.

    Volume control, "as you like it".

    Vague, put the max slider.

    All others are ok in the middle.

    Close the Volume control.

    Now we will install your micro Genius:

    Click on the Audio tab:

    Audio playback: System.

    Sound recording: click the menu drop down and choose your Genius mic, click on apply.

    Click the voice tab:

    Reading of the voice commands: System.

    Voice recording: click the menu drop down and choose your Genius mic, click on apply, click OK

    When you want to use your Web Cam microphone, you will need to go back and select again instead of your micro Genius.

  • Microphone picks up foreign sounds other than my usign speech recognition speech.

    Only to learn how to use speech recognition on my Windows 7 laptop.

    Training of speech for Setup microphone went very well...

    .. up to - the microphone picks up foreign sounds other than my speech.

    It displays the message title that was it?

    I then wait for the message to disappear before I continue to talk.

    There are some answers that I can talk to that speech recognition is programmed to accept for that matter?

    Thank you

    Hi John,.

    I understand the inconvenience caused to you.

    Rest assured that I will do my best to help you solve the problem.

    I would like the links and check if that helps to properly use speech recognition.

    Dictate text using speech recognition

    Common commands in speech recognition

    Set up speech recognition

    What can I do with speech recognition?

    Hope this information helps. If you have any other questions about Windows, please let us know.

    Thank you.

  • Paviliion dv7: external Microphone not Picking Up Sound

    Hello

    I recently bought a product that works better with direct external headphones. It was my first time ever using one with my laptop. When I went through the set up process, the microphone would pick up all the sounds and I couldn't hear anything through the external listener.  I tried to use the microphone and headphone port as well as the helmets of the different with the same result. Headsets work very well on other devices.

    When I use only ordinary headphones connected via the helmet, I hear very well.

    I went to control panel > hardware and sound > Sound > manage Audio devices to solve problems, but nothing has worked. I tried to update the latest drivers and I was told later are already installed.

    Is the name of the product: HP Pavilion dv7 Notebook PC

    Product # (NOT the serial number) is: B5R46UA #ABA
    The external microphone is called: IDT High Definition Audio CODEC

    Please advise,

    chriscinthed

    Hi @chriscinthed ,

    You can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop. It will also fix the sound.

    When you perform a system restore Please note remove all USB devices and headphones. Disconnect all non-essential devices because they can cause problems.

    Speaking to Rosetta Stone said headsets for use with the software here is for Plug-and-Play technology for the connected USB headset. Other computers you've tried have the Beats Audio.  To turn on or off the Beats Audio, press the fn in combination with the b button. Decision-making has influence on the Beats Audio which may need to be turned off. Then, try the microphone.
    You guarantee that you plug the microphone headset in the selection for the helmets on the laptop.

    Thank you.

  • Satellite A350 - Microphone making strange noise

    When talking to people on Skype and MSN people say my mic makes strange noises. They can hear me vaguely on the noise. People say it's a bit like a gurgling noise.

    At first I thought that it would be a driver problem so by using Device Manager in windows I have searched online for a update for my Realtek High Definition Audio and he told me that the version is up-to-date.

    I went from Vista to Windows 7 about 5-6 months there may be that this is a problem when I reinstalled my drivers? Any advice would be appreciated!

    Characteristics of the computer:
    -Windows 7 Ultimate SP1
    -Intel Core 2 Duo CPU P7450 2.13 GHz
    4.00 GB of RAM (2.99 usable)

    Thanks in advance

    Hello

    Driver update might be useful in this case, but the audio driver is not related to the internal mic. The internal MIC is part of the webcam then in this case I recommend to reinstall the driver for the webcam of the official website of Toshiba:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    And don t forget to check the Windows sound settings. I would try to disable the microphone amplifier and reduce the volume of the microphone.

  • Satellite L300-1AQ - microphone picks up all sounds

    Hello

    I installed windows 7 on Satellite L300-1AQ. everything seems to be in order except for the microphone? It captures all the sounds. I use Skype, a large part of the time. Someone had pulled in a solution for this? I see it's a pretty common problem following a search on google but still it doesn't seem to be a definitive solution. I paid up the microphone up to 100 and 40 dB in its settings, but when I try to record sounds that he came back only with nothing.

    Thank you

    Hi Dermotsull,

    Have you installed most recent the the official website of Toshiba webcam driver?

    I ask this question because the microphone is part of webcam and so this driver must be installed correctly.
    In addition, I would recommend updating the audio driver. You can find it on the Web from Toshiba site too.

  • My microphone stopped working but sound works through my headphones

    My microphone stopped at wprking yesterday, after managed to recover my sound I have tried everything I can think of to fix the microphone without result. Currently still ruinning windows vista. Have never had this problem before. I use the logitec usb headset my computer is an Asus (mainly games) I went through all the dysfunctions and read all the posts that has similar problems and still none.

    Hycina,
    You can test it with another microphone on your system?  Maybe with another headset USB and see if the problem occurs with a different headset.
    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How to adjust my microphone. to pick up sound without YELLING?

    my microphone is not picking up sound properly

    You have set the volume level of your Microphone?

    Control Panel-> sounds and audio... then
    Voice (tab at the top)-> Volume (button in the box 'Recorder').
    Make sure that the Microphone volume is not set too low.

    HTH,
    JW

  • Microphone on the Realtek sound card reading

    I have a Toshiba laptop with Realtek sound card. The operating system is Windows XP Professional SP3.

    I tried to record videos from Fraps while commenting via the microphone of the laptop; as far as I know, the best way to do is allow a reading microphone on the Volume Control Panel and recording of stereo mix. However, reading of the Volume control section is missing the Microphone input. Even when I go in the Options Panel to select the playback device, all I get is Master Volume, wave, SW Synth, CD player, SPDIF and PC beep. The Realtek HD Audio Control Panel doesn't have relevant option either.

    The microphone does not work correctly. My desktop computer using the same version of Windows has the corresponding section of the Volume control and it works correctly (I've used before) so it must be a problem specific to the sound card. I heard that some card manufacturers have this feature disabled in the registry due to problems of Larsen; If this is the case, is what registry key? Your comments is not a problem because I use a headset.

    In a Word, what I aim for, that's what I speak into the microphone played through the speakers, and therefore be able to record in real time via stereo mix. I managed to get the correct effect using Overdub of Audacity (feedback in real time of entry in the forums), but if I set Audacity and Fraps to record from different sources (mic for Audacity, stereo mix for Fraps), Fraps puts Audacity input muted for the duration of its own record.

    Unfortunately, some manufacturers of audio devices turn off or do not understand "stereo mix" or "what you hear" in their software drivers.

    You really need a Pro Audio device with hardware mixing/routing facilities.
    Or get a cheap Sound Blaster - better quality and they have the ' did you mean' feature.
    See you soon
    Jerry
  • Cannot use the internal mic. External microphone works but the sound is not very loud.

    Original title: microphone

    My microphone internal hp no longer works.  If I plug an external microphone into the socket, it will work, but the sound is not very loud.

    Hello

    1 how long have you been faced with this problem?
    2 did you recent hardware or software changes to your computer before this problem?

    Step 1: Try to run auto Locksmiths and check.
    Reference: http://support.microsoft.com/gp/hardware_device_problems

    Step 2: Set the default Microphone.

    a. go to Start and click on Control Panel.
    b. click on her, then a new window will open.
    (c) in the new window click on the "recording" tab and right-click in the window and click on Show disabled devices.
    d now check if the Microphone is listed there and right-click on it and choose Activate.
    e. Select the Microphone, and then click "set as default"

    Reference:
    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/record-sound

    Thanks and greetings
    Umesh P - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • microphone internal non-functional / sound card?

    I have a gateway all-in-one and there were no problems during the past two years, that I have owned this. Now, I tried to us on Skype (I use it everyday for my business) and the microphone is released. I checked the audio settings and it says my sound card is not detected and I don't have a microphone. This computer has a microphone built into it so I never need to use a USB microphone. What happened and how do I get my mic on?

    Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  • microphone captures all the sounds around him

    When I'm on steam or just using my headset when I talk, I hear other sounds around me how can I fix problem cause it's hard to play games on my laptop cause my choice of microphone, all the sounds around me. my lap top is a Lenovo 2013 windows 8-os h.d. 427 GB not touch scree. Please help asap thank you

    Hello Mary,.

    Thanks for posting your question on the Microsoft community.

    Thank you for details on the issue.

    This problem can occur because the parameters or corrupt device drivers.

    I suggest you Start convenience store audio and check if that helps. Please follow these steps:

    a. press Windows + C keys and click on Search.
    b. type Troubleshooting in the search box, click on it in the search results.
    c. click on "display all" and then click on 'Audio'.
    d. click on 'Next' and follow the on-screen instructions.

    Please also updated audio driver from the site Web of the manufacturer of the computer and the check.

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • 21 "iMac 2010 with el capitan making a buzzing sound and won't start not

    I have a 2010 21 "iMac running EL capitan who today suddenly makes a gurgling noise and he wouldn't do anything so I turned it off and tried to put it back on and it continues to make a buzzing sound, as soon as I press the bottom of the power to the rear it hums 3 times then stops and emits a 3 stops... on a black screen. All tips thank you

    Three beeps usually indicate a problem with the RAM.

    See > Startup on computer - Mac Support Apple tones

    Sometimes, modules dispose and sometimes the modules go bad. Personally, I would check and/or replace the RAM modules.

    If you cannot or do not know how to install or check the RAM for yourself...? Next, you need to contact your Apple Store or FSAA and book a service appointment. See > https://locate.apple.com/country

  • Why is my iPod Touch 5 making a buzzing sound?

    My iPod is not playing music or make sounds. When I try to play music nothing happens and when I try to play a sound effect, like a ringtone, it is it buzz. I tried to remove my case and nothing happened. I also tried unplugging my headphones to see if they were the problem and nothing happened then either. Please help me! What should I do?

    It's an iPod Touch with 32 GB of storage 5 and I had a little more than two years. Thank you!

    First of all, check if the mute is enabled. You can open the control center and press the mute icon, or switch on the side of the iPod. If this does not work, you should try to update, or bring it to the Apple Store, where they can fix.

Maybe you are looking for