Microphone wireless stereo Headset & USB Bluetooth adapter is not working

Similar Questions

• USB Bluetooth adapter works only on windows 8

  Hi, I have a PC running windows 8. My hama-USB Bluetooth adapter does not work. I mean, I have it plugged in, the drivers have been installed automatically, I even installed the drivers on the disk. The bluetooth adapter is displayed in my devices, but I can't use it at all, if I am looking for bluetooth, it shows me nothing useful.

  Thank you very much

  Philippe

  Hi, I also had the same problem. Found the solution by downloading and installing "Bluetooth Stack for Windows by Toshiba" of

  http://support.Toshiba.com/support/viewContentDetail?ContentId=3461138

• Found usb bluetooth adapter in 626 x box? Where the application overview?

  I just bought a replacement to my 2009 Enterprise edition ReadyNas Pro success. I have contributed the most to the RAM and upgraded the processor in the old horse in 2009 and it has been amazing ever since, but recently the lower power supply fan seized completely it is time to retire the old box and upgrade!

  So, I bought a 626 X last week and it's currently sitting in my living room. I'm waiting for an update of backup on USB to finish at the old box, then I'll change the disks of 6x2tb of place in the new unit and restore the backup.

  Unpacking of the new kit, I found a USB bluetooth adapter that is stuck inside the box. Around the navigation, I found mention of a 'insight' phone application that uses bluetooth. I can't seem to find it either in the app store of apple or android and I saw other a designate as beta.

  Anyone has any info on this app or what can I do with the bluetooth dongle?

  Hi Cpitchford,

  Application overview is not yet officially published, please wait.

• Satellite A660 - Broadcom internal wireless adapter does not work

  Hi all

  My first post to this forum - I have a new laptop of Toshiba Satellite A660 - only had for about 4 weeks and it turns out be a disaster for me...

  Firstly - I spend weeks getting everything on and configured as I want - then the hard drive begins to die...

  I just returned it service center Toshiba and NOW wifi has stopped working...
  Internal broadcom wireless adapter doesn't work - but according to windows and built-in Diagnostics it works...

  HOWEVER - when I try to use wireless with the built-in adapter may not detect all wireless networks...

  I then plug in my adapter netgear usb wireless backup and I can pick up and connect both of my wireless home networks...
  I am moving abroad in a few weeks and need to know that my laptop will work/be reliable and not have any problems-if anyone can help me with this, it would be much appreciated.

  John.

  Before starting the scan for available wireless networks you have activated WLAN card correctly?
  Orange is WHAT turned on WIFI?

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• Wireless network adapter does not work on my Satellite A200

  Hello

  My wireless network adapter does not work under Vista. If I press FN + F8 nothing happens. Wireless communication is always offline.

  What can I do?

  Details:
  Typ: Atheros AR5008X Version: 7.2.0.164
  Laptop Satellite 200
  PSAE6E

  Please help me!
  Thanks in advance!

  Phil

  BIOS bug? I don t think so

  First of all, you must make sure that this isn't a hardware problem. In this case, insert the Toshiba Recovery CD and reinstall the operating system of this device. This will outline the laptop to factory settings. Notes; This would format the whole HARD drive.

  After the new installation, you must activate the WLan switch on the side of books, and you can then use the switch button FN + F8 to select the WiFi network.

  I assume that you have already configured your Wlan router. So the same settings such as the SSID, encryption of WLan, etc. must be defined on the laptop too.

• Satellite Pro L40 - wireless adapter does not work - Vista

  I recently had some problems with my laptop.
  A couple of weeks, I put in a disc of OpenSuse.
  It's not stable anything, but locked me out of my original Vista operating system.

  I reinstallled Vista Home Basic, but there are a few problems.
  Mainly, my wireless adapter does not work.

  When I flip the button to turn it on nothing happens and it is not recognized in Windows.
  I installed Atheros Driver, but still nothing happens, light is not yet.

  Any advice?

  Hello

  First check the device-> network adapters area manager
  You see the WLan card? Or the unknown device appears?

  If there is an unknown device, then the WLan driver has not been installed correctly or you tried to install a driver badly these two options are possible.

  Remember that your wireless network card? Maybe it was a Realtek WLan card?

  If it's a Realtek WLan card, try the WLan driver from the Realtek website and look for 802.11 g (RTL8187B) chip or you will simply check the page of the European driver Toshiba too the Realtek WLan driver also appeared on the Toshiba page

• Cannot install WIndows XP SP3 - wireless adapter does not work with any package of service beyond 2.0

  original title: wireless adapter does not work with any package of service beyond 2.0

  I have an AirLiink 101 wireless adapter.  Anyone know how to change the service pack 3.0 for me to update my Windows XP?   Can not install 3.1 without losing wireless connection.

  Thanks for any help.

  If you are on a wireless connection, try to switch to a wired connection and try the download with Internet Explorer.

  UTC/GMT is 06:49 on Wednesday, April 11, 2012

• WUSB600N wireless adapter does not work if hooked up to Windows startup

  I have the adapter WUSB600N wireless, and I use it with Windows 7 Ultimate 64-bit. I use the latest available driver, 3.0.10.0. When Windows first starts, the adapter does not work properly and is unable to connect to any network, regardless of how long wait. If I unplug it and plug it back after that Windows is already running, I don't have this problem. This does not work when the "reboot" of the machine; only when turning the power off and then on again.

  Do you have an error message when attempting to connect to the wireless network?

  Try to uninstall and reinstall the wireless card and see if that helps you.

• Wireless adapter does not work.

  Original title: wireless

  I install win7 in my fujitsu siemens AMILO Li 1718 model system, all the drivers are installed but I have problem with my wireless, wireless is not see the amything all available wireless driver is installed courrently can someone help me solve this problem

  Hi Amy,

  It seems that your wireless adapter does not work.

  There is no Windows 7 drivers for your model. You can check this link for simple information.

  http://support.TS.Fujitsu.com/download/ShowDescription.asp?SoftwareGUID=689AC3EC-583D-4B7F-8D1A-CED2F9D7EED8&info=FTS

  I suggest you to visit the above link and download Vista drivers for your wireless card. Install them in compatibility mode.

  Refer to this link: make sure to run older programs in this version of Windows.

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  If the problem persists, I suggest you contact Fujitsu support:

  http://Forum.TS.Fujitsu.com/forum/viewforum.php?f=89&SID=1856691d77caf93b0cf1e8058e951cd4

  I hope this helps.

• Want a Smart Touch 23-065: I've upgraded to Windows 10 and now my bluetooth devices do not work

  I have a Smart Touch 23-065 envy that I have upgraded to Windows 10 and now my bluetooth devices do not work. They are detected, but not pair

  OK, line background peripheral bluetooth is not supported until the vendor provides a Windows 10 driver which is not yet and my never be available. Suppose if I want to use bluetooth, I'll have to get a usb adapter

• Windows 7 message pop-up cigarette... "local area connection adapter does not work correctly. Problems related to the pilot experience or material"what the devil does that average and that the devil can do?

  When I logged on this morning, Windows 7 gave me the following message... "The connection to the local network problems hardware or driver. For connection to the local network adapter does not work correctly. "My Windows offered solution was go using Windows.  Help

  Hello

  Try to uninstall and reinstall the network adapter drivers.

  Download the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  ---------------------------

  Computer network health.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Windows 95 Ethernet adapter does not work

  Hello

  I have created a machine virtual windows 95 and followed the instructions exactly in the link below.

  Documentation for VMware for Windows 95

  However, the network adapter does not work.  I have the latest version of VMware tools installed, but it does not seem to include any network card driver.

  I tried to download the driver for AMD PCNET Family Ethernet Adapter (PCI and ISA) from the AMD website, but that doesn't work anymore.  I have a virtual machine running Windows 95.  However, he created an image of a physical machine.  The ethernet adapter works fine on this machine, but there is no driver installed - does not require a apparently.

  If anyone has an idea on how to make the ethernet card works, I would be eternally grateful!

  Here is the configuration I have for the Windows 95 VM I created:

  . Encoding = "windows-1252".

  config.version = '8 '.

  virtualHW.version = "6".

  scsi0. Present = 'TRUE '.

  memsize = "64".

  ide0:0. Present = 'TRUE '.

  ide0:0. FileName = "7Win95.vmdk".

  ide0:0. DeviceType = 'disk '.

  IDE1:0. Present = 'TRUE '.

  IDE1:0. AutoDetect = "FALSE".

  IDE1:0. DeviceType = "cdrom-raw"

  floppy0.startConnected = "FALSE".

  floppy0. FileName = "a":

  floppy0. AutoDetect = 'TRUE '.

  ethernet0. Present = 'TRUE '.

  ethernet0. ConnectionType = "nat".

  ethernet0.virtualDev = "vmxnet.

  ethernet0.wakeOnPcktRcv = "FALSE".

  ethernet0. AddressType = 'generated '.

  Sound.Present = 'TRUE '.

  sound.fileName = "-1".

  Sound.AutoDetect = "TRUE".

  roamingVM.exitBehavior = 'go '.

  displayName = "7Win95."

  guestOS = "win95".

  virtualHW.productCompatibility = "hosted".

  extendedConfigFile = "7Win95.vmxf".

  IDE1:0. FileName = 'D: '.

  floppy0.FileType = "peripheral".

  floppy0.clientDevice = "FALSE".

  IDE1:0.startConnected = 'TRUE '.

  ethernet0.generatedAddress = "00: 0C: 29:66: ff: 4 d.

  tools.syncTime = "FALSE".

  UUID. Location = "56 4 d f3 c8 9 c 66 1 0 b - df 02 c3 6 3rd b 66 c ff 4 d.

  UUID. BIOS = "56 4 d f3 c8 9 c 66 1 0 b - df 02 c3 6 3rd b 66 c ff 4 d.

  cleanShutdown = 'TRUE '.

  Replay.Supported = "FALSE".

  ide0:0. Redo = «»

  Replay.FileName = «»

  vmotion.checkpointFBSize = "21102592".

  ethernet0.generatedAddressOffset = '0 '.

  USB. Present = "FALSE".

  pciBridge0.present = 'TRUE '.

  pciBridge0.pciSlotNumber = "17".

  scsi0.pciSlotNumber = "16".

  ethernet0.pciSlotNumber = "32".

  sound.pciSlotNumber = "33".

  Try changing line ethernet0.virtualDev = "vmxnet' to 'vlance.

  Once the AMD driver is installed and running, THEN you can try to change the vmxnet driver, by repairing the VMware Tools on the guest.

• Satellite L50 - C - 1 L 2 - USB 3.0 does not work correctly

  Hi, the new Satellite L50 - C - 1 L 2 has maybe a problem of USB 3.0. All the componetens that I connect to USB 2 works correctly. But some of these plugged into USB 3 doesn't work. A driver from Microsoft for USB 3.0 extensible Hostcontrolller v 1.0 is installed, no more. I cannot find any USB 3.0 driver in collection of driver of Toshiba. What can I do? They are a special USB 3.0 driver?

  Greetings, Michael

  im not toshiba but tell me how you know that your usb sata 3 do not work, you should have a usb 2.0 port and two usb 3.0 ports, if you use the usb 2.0 to usb 3.0 port device you will get only 2.0 speeds. USB 3.0 is backward compatible with usb 2.0 even peripheral id usb 3.0 according to manufacturer and specs of the device and how to use it. lets say spec is of high quality and again then you transfer files small speed should be fast that belong to 3.0 speeds but if you transfer large files then your currency becomes warm or hot and gets corrupted performance speeds down you can even get up to usb 2.0 speed and maybe that's why you think that your USB 3.0 ports do not work correctly , I hope that its clear things that worry you.

• AC adapter does not work with the Qosmio F50-111

  Hello world

  I bought a Qosmio F50-111 this morning.
  The power adapter does not work on my computer (no led lit when connected), but he's working on a Satellite A300 for a working partner.
  And his power works on mine.

  I would like to know if people here have a Qosmio F50-111, the model of power that I have a model 3290-3AC3... I would like to know if it's good.

  Thank you all

  Before you expect an answer here, contact your local dealer and clarify this situation. You can also contact the nearest authorized service provider. They can say with certainty if the power adapter is one that suits or not. If you have the wrong I'm sure you get the right one for free.