Microsft #8 ISATAP adapter... This device does not work because windows cannot load the drivers for this device Code 31... ??? Can anyone help I just use computers don't understand them...
I tried to update the drivers but it says that I have installed the last...
See this:
On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
http://support.Microsoft.com/kb/932520
You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.
You can uninstall and windows should reinstall on reboot, but you can install it yourself.
How uninstall/reinstall Isatap
http://www.ehow.com/how_7567513_reinstall-ISATAP.html
If you cannot connect to your network, you have another problem.
Try to manually update your (wireless) network adapter. Go to the support site for your computer manufacturer and download the latest driver:
How to upgrade Windows Vista drivers
http://pcsupport.about.com/od/fixtheproblem/HT/updatedrvvista.htm
Tags: Windows
Similar Questions
-
And it displays the following message: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». I tried all the tricks troubleshooting to no effect. I uninstalled and reinstalled and look for the updates to install. What should I try next?
http://support.Microsoft.com/kb/314060
Your CD or DVD drive is missing or is not recognized by Windows or other programs
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: where can I find these adapters
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
Control Panel - Device Manager - do a right-click on the two - UNINSTALL - REBOOT
Nothing else to do, Windows will do the rest. And you can ignore errors if
you want and on some computers, it will always be there but don't cause any trouble.On a Windows Vista-based computer or on a Windows Server 2008-based computer, the
Map Microsoft ISATAP appears with a yellow exclamation mark next to it in device
Manager and you also receive an error message
http://support.Microsoft.com/kb/932520I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
I replaced a heatsink and fan in a laptop of friends. The laptop works fine now. In Device Manager, however, I'm getting a code 31 for the Microsoft 6to4 adapter. Is it because this person uses several networks? Is it because I'm connected to my home network? Or I did something wrong during the reassembly? Someone of you know this?
If you experience any problems you can ignore it.
See these:
Microsoft 6To4 card issues
http://www.ehow.com/way_5602460_microsoft-6to4-adapter-problems.htmlOn a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
http://support.Microsoft.com/kb/932520/en-us -
Windows cannot load the drivers for the network device, Code 31
A few days ago, my computer was working very slow... I turned off twice and he turned his back. The letters on the screen were enormous when windows restarts. I turned off and did a diagnostic system before windows starts and everything was fine. The computer is restarted my network cards were missing. I get the error: this device does not work properly because Windows cannot load the drivers for this device. (CODE 31). (Module Aetheros 802.11 a/b/g/n dualband wireless network and Realtek PCIe GBE Family Controller).
I have downloaded device drivers (windows could not find them on my system) using a laptop and copied computer on a disc. I tried to install and I got an error message indicating that windows has failed. I did a system restore to a point a few days before I started having problems. Windows cannot successfully go back to the restore point. I spoke with a technology computer and HP tech. HP technology seems to think that windows is damaged and I need to remove and reinstall it on my computer. I spoke with computer technology in my area, and he seems to think that my hard drive has failed, however I can still run photoshop and backup my system.
Does anyone have any ideas before I m computer local tech. 3 year warranty just expired February 1, 2011. Don't you know.
Hi TeresaPacy,
1. don't try to install new software or hardware on your computer recently?
You try to run a SFC scan to check the corrupted system files.
You can read the following article to launch the SFC scan:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Regarding errors of network adapter, you can consult this article:
http://TechNet.Microsoft.com/en-us/library/cc725584 (WS.10) .aspx
-
My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »
Is anyone know how can I access my hard drive again?
Thank you
Hello
You has made changes to the system before the error appearing? Cancel the changes.
(1) in Device Manager > right click on the driver, and then select uninstall
Reboot and Windows will reload the driver
(2) remove the upper & lower filters that cause errors in Code 31
http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm
Access the manufacturer's Web site and search for updated driver
-
Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.
Jake
Hey Jake,
Follow these methods.
Method 1: Follow these steps:
(a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.
(b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.
(c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:
Remove or reconfigure newly installed unit.
Restore a version prior to updating the driver.
Use system restore to undo the Device Manager recent related changes.
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
(d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Method 2: Update the latest graphic drivers.
Updated a hardware driver that is not working properly
-
Hello!
I have problems connecting to my network. I stay in a House (not my own) and I can't connect to the network in this House. When I choose the option 'connect to a network', nothing happens. I followed the instructions to display the "Device Manager" and watch the 'map', and he said:
"This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »
When I click on this button, nothing happens... Should I simply wait for Microsoft to return to me - or is there something else I need to do?
Thank you!
Hello
You must get the drivers latset for m computer support site.
Delete the "false: entry in Device Manager and install the new drivers."
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I've updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.
Thanx
Hi rui2010,Place your machine in a clean boot State to see if another application is in conflict with the modem.If this fails, I recommend you reach out to the community Hauwei for assistance:Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
Hello
Have you tried to update the drivers as suggested by Basith M?
Method 1:
You can run the fix provided in the link and check out them.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/GP/hardware_device_problems
Method 2:
You can also try the procedure described in the link to troubleshoot driver issues.
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
See also the proposal contained in the link and check.
On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
http://support.Microsoft.com/kb/932520/en-us -
Original title - USB - IF xHCI USB Host Controller
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
I have a permanent error on my computer and when I run the troubleshooter I get the above message. It says Windows cannot load the driver.
Hello
USB devices remove all you can - restart the computer - is still there, the error? If it isn't
It is related to one of the add-in devices that you removed. If she is still there, then, the question is
either a device internal who can not remove or physically with the USB bus itself.
If it was not there, add devices at a time until it is displayed - keep in mind that it is
possible that there are two (or more) devices in conflict over the issue. Once you
identified the check of the aircraft with the help of the manufacturer.1. to find the control panel - device - device - right-click on it - uninstall - Manager then
Restart the computer to see if it clears.2. same place - double click on the device - driver tab - driver update - to see if that helps.
3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
online documentation and drivers, diagnostics and ask questions in their forums on all known
questions. Update the Bios and chipset or other USB drivers.=====================================
If necessary, we will use these additional troubleshooting methods:
How to fix Code 31 errors
http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htmI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
-
My cd rom device does not work because its configuration in the registry is damaged, (error Code 19). Tried all the easy solutions (update - was active), any ideas? Thank you
Hello
· What is the accurate and complete error message?
· You will remember to do recent changes on the computer before this problem?
I suggest you follow the steps mentioned below:
Method 1:
Race fix from the following link and check if the problem persists:
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
Method 2:
If the previous step fails, follow the steps in the link:
http://support.Microsoft.com/kb/929461
Method 3:
If the previous step fails, follow the steps in the link:
http://TechNet.Microsoft.com/en-us/library/cc772156 (WS.10) .aspx
-
Original title: WAN miniport driver
A yellow sign appears on MINIPORT Wan (IP), MINIPORT (IPV6) AND WAN WAN MINIPORT (NETWORK MONITOR) for this reason I have not access to internet to throw bluetooth tethering that even he does not connect. In the properties of the driver, it indicates:-this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
I use windows 8 in my sony vaioMODEL - SVE15123CNWHi Praveen,
Perform the steps suggested by Nirmal S from the link below and see if it helps.
Answer please if you have any questions.
-
can u help me quickly?
Hello
-For how long have you had the problem?
-Did you change your computer, after which the question began?I suggest that you uninstall and reinstall the drivers for video card and check if that helps.
-
The Windows Installer does not work. Try to install the drivers for the HP laptop.
Original title: win installer
In my victory 8 on Setup window does not work and my laptop is hp 1000-1040 core i 3. and I need all the drivers for my computer hp 1000-1040 core i3 laptop. years me please I wait your answer me...
If you do not already see this:
http://WWW8.HP.com/us/en/support-drivers.html and follow the Instructions and download and install all the drivers/software for windows 8. Hope this helps and if you need another post to help and we will be happy to help you.
The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum
"When we try to take anything by itself, we find that he hitched to everything else in the universe." -John Muir
Maybe you are looking for
-
Cannot move the bookmarks in the bookmarks toolbar... I get the slash instead
When I try to drag a web address in the bookmarks toolbar... I get the circle with a slash in there... I can't add all the bookmarks in the bookmarks toolbar. This never happened in older versions of the combustion chamber, only in version 31. Any he
-
I have an A61E, which is still in use. To add the WIFI feature, I was watching a USB 2.0 WIRELESS 802.11 adapter specifically ac. Would this work?
-
My ati mobility radeon HD 5000 series graphics card is not detected when I upgraded to windows8
Hello I have a hp pavilion dv6t-3100 entertainment notebook pc. recently, I bought windows8 and updated. System couldn't mobily detect ati radeon HD 5000 series (microsoft corporation - WDDM v 1.20) I'm getting the device as a status This device cann
-
import the shared library function name change
Hello I used 'Import Shared Library' to create a lvlib, but he changed function name, for example to Z2onj() on(), so created VI does not work. It has this error: Call library function node "libname.": Z2onj: function not found in the library Details
-
Problem backup a table using a shift register
In the attached VI I'm build a table 1 d of channels, then try to record using a shift register. For some reason any is not backed up my data and I don't understand why. Thank you.