USB WIFI for old desktop PC

Similar Questions

• No adapter USB wifi for 10.11.5?

  I had a problem for a year with my MBP 15' mid-2012 which keep lack of Wifi hardware.

  I tried several cables and cards to Air two BT2.1 and BT4

  Cable Apple part No.: 922-9750

  AirCard 2.1 BCM94331PCIEBT4AX

  AirCard 4.0 BCM94331PCIEBT4CAX

  Also reset SMC and NVRAM

  Also erase and install on regular and the recovery of the Internet

  I've seen several post on the web

  and no official solution to the problem of APPLE

  My MBP is out of warranty and logic board set me back $ 600 +

  Funny is that my LV works very well!

  I prefer to buy a usb wifi dongle to pay $$$ for repairs on the machine that be other than "NO PORTABLE" (read Ethenet) works flawlessly.

  Anyone with any info will be greatly appreciated.

  And APPLE if there is an official solution considers that is OQ.

  Have you tried the

  EDIMAX EW - 7822UAC AC1200 dual band USB wireless

  http://www.Edimax.com/Edimax/merchandise/merchandise_detail/data/Edimax/global/w ireless_adapters_ac1200_dual-band/ew-782...

  http://www.Edimax.com/Edimax/download/download/data/Edimax/global/download/for_h ome/wireless_adapters/wireless_adapters_...

• 64 bit Windows7/8/8.1/10 USB drivers for Palm Desktop

  Thank you people much more to Aceeca.com (Palm OS Garnet NEW manufacturers), the USB drivers for Vista, Windows 7 and 8 Win 64 bit operating systems are available.  There are many users Palm Desktop 4.x strives also to the declaration.
  
  I have synced my TX my Vista64 laptop computer bits and Windows 8.1 HP spectrum X 2 hybrid successfully through my USB cable.
  
  The drivers are located here:
  
  Aceeca Driver Downloads

  (NOTE: as of today, 01/08/2016 Aceeca site to be down for 'construction'.)  Drivers can also be found here: http://www.palmdr.com/windows-7-64-bit-usb-drivers)

  Installation instructions for Windows 7 (from Aceeca) are included in the download.
  
  Basic instructions:
  
  1 download the drivers and extract them in the same folder.  Remember the folder that you extracted to.
  
  2. try to HotSync your device.  It will fail.
  
  3. open the Device Manager and look for the yellow Triangle next to the other "Acceca" or "'Palm device ' in the"Other devices"section."
  
  4. right click on the device and choose "Update driver software".
  
  5. choose "Browse my computer for software" and guide them to the folder that you extracted the drivers Aceeca.
  
  6 choose 'Next' in the driver and then file location window tell him 'Confidence always Aceeca Ltd. software', then click on the button "install".
  
  7. I received an error message (Vista64) who told me "the drivers have been installed, but the device could not be opened." I realized my TX had expired, and fell asleep.  I tried a HotSync and it worked!

  Good luck!

  NOTE: Palm Desktop 6.22 may only multimedia show and install.  Here's how to fix this:

  If Palm Desktop 6.2.2 shows only the media and installation, try this: right click on the shortcut for Palm Desktop, and then choose 'run as administrator '.  Other modules should appear.

  To Palm Desktop run as administrator every time in Windows 8 / 8.1:

  Close to Palm Desktop, if it is open.  (This is a very important thing to do when you use 6.2.2 - it has been known to lose data when a computer is shut down without closing the program!)

  Right click on the desktop icon of Palm in the metro screen, then choose "open file location".  You will now see the actual file for the shortcut.

  Right-click on the file "Palm Desktop" shortcut, then properties.  Now, choose the tab compatibility at the top.

  At the bottom of the Compatibility tab is a checkbox: "run this program as an administrator", click OK.

  Try to open the Palm Desktop, all parties must appear.  You can see a box opens when you close the program asking "did the program runs correctly.   I chose 'Yes', and it has been working fine since then!

  If you are using a much older PalmOS device and try using Palm Desktop 4.x, you will need this additional patch Pimlico Software:

  Palm HotSync configuration

  WyreNut

  Forum member bobboffin has added this message:
  
  "After you try your first HotSync and failing (as expected) you may be unable to find any trace of the device in Device Manager, making the next step very difficult. It is me, and after some research, I discovered the following trick that allows Device Manager to display hidden and devices not present.
  
  Open Notepad and paste the following two lines are:
  
  Set DEVMGR_SHOW_NONPRESENT_DEVICES = 1
  Start devmgmt.msc
  
  Save it as SetDev.bat in My Documents.
  
  Open My Documents in Windows Explorer and double-click SetDev.bat. Device Manager opens.
  
  On the view menu, select Show hidden devices.
  
  You can now see in the other position of the device with a yellow triangle against it.
  
  You can now proceed to install the drivers according to the instructions.
  
  Note that the driver supports most versions of Palm OS. "I actually use an Aceeca Meazura 1000 rugged PDA running OS 4.1 - bobboffin.
  
  I hope this helps!
  
  WyreNut

  pattirclark wrote:

  
  

  SUCCESS... After writing my last response indicating no connectivity, I tried a last time and success for the Palm Palm devices and synchronization with 64-bit Windows 8 71 22.  Thanks again to WyreNut for all the support that I know that this Forum is an advantage for those who have limited computer knowledge and detailed suggestions has worked perfectly...

  Thank you again...

  And thank you! pattirclark!  You are the first person to report success with drivers Aceeca and Windows 8!

• Need USB drivers for old Equium L40 - 10U PSL41E running Vista 32-bit

  Hi all

  I think that my USB driver is corrupted. I found the ChipSet, LAN and BIOS drivers for my old PSL41E Equium L40 - 10U running Vista 32 bit. However, I have not found the USB drives I need. USB drivers are contained in the ChipSet, BIOS or LAN driver?

  If not, where can I find and download the USB drivers for my old old Equium L40 - 10U PSL41E running Vista 32 bit?

  Thank you! -Le Cannet

  Here is where I found the drivers (but with no mention of USB drivers):
  [Drivers Equium L40 - 10U PSL41E | http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK&selCategory=8 & selFamily = 391 & selSeries = 326 & selProduct = 752 & selSho rtMod = 541 & language = 13 & selOS = 26 & selType = all & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 8 & pa ge 1 = & startPage = 1 & prevCl = true]

  > Are contained in the ChipSet, BIOS or LAN USB drivers driver?

  USB drivers are part of the Windows operating system.
  The USB ports should work after the installation of the Windows operating system and, therefore, there is no such thing as a USB driver for the USB 2.0 standard.

  In addition, the chipset driver must be installed.

  I checked the proposed link in your ad and here, you can download the Intel chipset utility.
  The update of the BIOS is also available

• USB Wifi between host (Win7) and comments (Ubuntu)

  Hi all

  I learn some stuff of WiFi security, and I installed Ubuntu in my VMWare Workstation 11 environment. My host OS is Windows 7, which is connected to my home network via Wifi

  Now, what I need is in the OS (i.e. Ubuntu) invited, I should be able to allow wireless access (so that I can run Wifi network scans etc.). I filled my network and laso used NAT, that give me access to my home network via my host, but they appear as wired connections in Ubuntu. If I understand correctly, this is possible by using a USB WiFi dongle.

  I bought a USB WiFi dongle now (it should arrive in a few days), but I don't know how can I get my Ubuntu OS guest to use this USB Wifi adapter while keeping my OS host on the built-in Wifi adapter.

  Simple I plug in the USB network adapter in my laptop and it will be recognized in Ubuntu or whatever I need to do some settings in VMware?

  Thanks in advance

  I got this job, post my answer for posterity

  I bought a TP Link WN823N USB Wifi adapter.

  (1) keep your host Wifi on. Plug the USB, let it download the drivers
  (2) once installed, turn on your virtual machine
  (3) open VMWare, right-click on your VM-> removable devices
  Here, you should see your USB adapter. Select Connect (disconnect from the host). He will now connect the adapter USB Wifi for your Linux VM and alto - it should work!

  What it does is essentially the WiFi adapter will be connected to the virtual machine and disconnected from the host and the host can continue to use the built-in WiF

• Acer 'UWA2', or equivalent USB WiFi Dongle for K137?

  I am interested in buying the Acer WiFi "UWA2" USB dongle for use with the projector K137 as stated in the manual, but am unable to find anywhere to purchase. I found the pattern on shop.digitec.ch but I did not trust this retailer.

  Is anyone aware of a place I could buy this accessory or another compatible USB WiFi dongle from? Thanks for the help!

  I'm sorry, but no, I do not mean that there is a built-in WiFi receiver. You asked questions on an Acer UWA2 USB Wifi dongle, and I have been informed that there is not one currently available in the United States for the purchase.

  We should offer the MHL Acer wireless adapter to the United States for use with the projector, but I don't have a time of availability of this card.

• Office Pavilion - 400-540hk: unable to retrieve files from the old desktop USB HARD drive

  My old desktop (model: CQ4128HK) can be power on. So I bought a new desktop computer (model: Pavilion Office 400 540HK). I have a lot of important files in my old office, so I bought a SATA-USB enclosure and connect my old hard drive to the new office. However, after connecting the old HARD drive, I can't find my files or windows folders; Instead, I see that a single drive with folders named "Backup-xXXx" or "WindowImageBackup".  Please suggest how to recover my files on the old HARD drive. They are very important. Thank you.

  Hello

  Please try this first: bring the box (old HDD) and connect it to a machine not HP to see how it goes. I remember I have one similar problem in another day; reason: the old HDD still has a "signature" as a boot device.

  Kind regards.

• USB WIFI adapter

  I have an old HP desktop computer for 6 years with Intel Core 2 [email protected] GHZ with 4 GB of RAM. And I was wondering if I get a USB WIFI adapter that will work with this computer?

  When you request support, please provide the complete product of the HP computer in question number. HP/Compaq made thousands of computer models which are all different. Without this information, it can be difficult, even impossible to help you solve your problem.

  The above requested information on the side, back, or bottom of your computer.

  A USB 2.0 802.11 b/g/n wireless adapter should work on your computer.

  Please click the White Star of KUDOS to show your appreciation

• HP Pavilion ZT 1000 wireless card or usb wifi?

  I have an old 1000 ZT iv had a new present, I don't think that it has wifi or wireless internet. I m woundering if getting a usb wifi is good or get the wireless card would be best? I need the computer connecting to the wifi at school and is everythign nowadays wireless

  IS that the model HP Pavilion ZE1000-BI? I can't find a ZE1000-IV.

  If so, the site does not give the specs, but it offers a driver wifi for XP.

  But if your laptop doesn't have WiFi, then your only alternative is to use a USB Wifi adapter.

  Virtually all of them are now compatible with b/g/n standard.

• HotSpot Z10 using Z10 blackBerry for my desktop

  How to use the Z10 hotspot for my desktop computer?  can I use the USB cable or is it purely as wifi?

  You can use the Hotspot, cable USB or Bluetooth. Here is my post on the interent on all three speeds.  http://supportforums.BlackBerry.com/T5/BlackBerry-Z10/Z10-Internet-tethering-hotspot-vs-Bluetooth-vs...

  To activate the hotspot, go to (get down from the top) settings, network connections, select Mobile hotspot.

• I want to give my wife my old iPad

  I want to give my wife my old ipad. She does not yet have an Apple ID.

  How can we keep (our town) favorites/bookmarks, preferences, applications, etc. for its simple beginning?

  Hello. Visit this link: what to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

• How to install the USB WiFi adapter?

  I've received a USB WIFI adapter and do not know how to set up or even knowing if it is attached.

  New hardware has been installed on the plug-in. Switch turned on, but there is nothing that lets me know he's working.

  Hi garyhenrymacphail,

  Hmm and what should I say now? I also put t how to configure your USB WiFi adapter because I don t know which you have, what laptop and operating system.

  The spirit normally each USB WiFi adapter, you also get a manual how to install it. Alternative, contact the manufacture of this adapter for more information.

• ACCESS INTERNET ON H P TAB 7 TAB (VOICE) VIA A USB CABLE FOR MY COMPUTER NETWORK

  I CAN'T ACCESS INTERNET ON H P TAB 7 TAB (VOICE) VIA A USB CABLE FOR MY COMPUTER NETWORK. PLEASE HELP ME.

  Hi AR7, welcome to the Forums of HP. I understand that you can not connected to the Internet. HP offers no support for this configuration, as a result, here's the method to connect to a WiFi network.

  Connect to a wireless (Android KitKat, Jelly Bean)

• USB 3.0 on desktop release

  When HP released USB 3.0 on desktop computers?

  DSC, it is a volunteer help forum.  Many of us do not work for HP.  Therefore, it would be preferable for you to use the Service to HP customers for the answer to your question.

• BSOD when putting in an Inspiron 1100 USB wifi adapter

  When you use a cat5 connection, it works fine.  Much less the 100% of the svchost CPU, I connected via the Task Manager.  The KB update did not help.  Minor problem.

  The major problem is that I get several BSOD when I plug the USB wifi adapter.  Mainly of 0 x 00000050 0x0000008e, 0x000000c2 and 0x000000f4. I have reinstalled twice in the driver package.  The adapter is compatible XP.  I tried both USB ports.  This is the second card, I tried from different manufacturers.  I scanned for viruses and malware.  To make this usable machine, there must be wireless.  Any help is welcome.

  Please follow our instructions to find and download the files, we need to help you fix your computer.  They can be found at here

  If you have any questions regarding the procedure, please ask