Microsoft ACPI Control method battery compatible not reinstall.

Similar Questions

• Compatible Microsoft ACPI control method battery is missing

  My computer (Acer Aspire V on Windows 8) suddenly began to turn whenever it was unplugged and does not turn on unless it is plugged. Battery icon saying "plugged in, but do not load.

  Everything I read said to try to uninstall and then reinstall the Microsoft ACPI control method battery driver in Device Manager, however mine is missing. The only option on the batteries in the Device Manager tab is the Microsoft AC adapter driver. When I click on "Search the hardware changes" or try to reset the computer it will not reinstall a new driver for the Microsoft ACPI compliant control method battery. How can I find/reinstall this driver?

  If the battery is about 1 year before, I think that's the problem.

• Compatible Microsoft ACPI control method battery

  I uninstalled acciendentally Microsoft ACPI compatible control method battery now my battery icon is gone. No idea how to solve this problem?

  Hello

  Try a system restore to a point where he worked.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  GOLD:

  Then restart:

  1.
  New control panel - Device Manager - Batteries? If so see 2 below - otherwise, click in the box of WHITE/WHITE
  in the device manager - then click ACTION to restart the computer - Scan for hardware changes - top of the page and if necessary, see 2.

  2.
  How to enable or disable the Notification area system icons in Vista
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Try to uninstall the Microsoft compatible control method battery driver ACPI

  Separated from this thread.

  I'm trying to uninstall the Microsoft compatible control method battery driver ACPI.  When I right click the icon and click on uninstall, it won't uninstall after restart or stop.  Is there another way to uninstall the drivers?

  Hello

  Thank you for visiting Microsoft Answers.

  According to the description, I understand that you are not able to uninstall the control method compatible with Microsoft ACPI Driver of the computer battery.

  I certainly understand the inconvenience caused to you and I'll do my best to help you.

  In order to understand the issue more clearly, please provide me the following information.

  1. Why you want to uninstall battery compatible with Microsoft ACPI Driver control method?

  2. Are you facing any problem with battery Microsoft ACPI compatible method?

  I want to provide you with the information that the compatible Microsoft ACPI control method battery component supports Advanced Configuration and Power Interface (ACPI) control method battery, include an interface to control method of code ACPI Machine Language (AML) between the battery and the host computer.

  It cannot be uninstalled.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Microsoft ACPI compliant control method battery problem shows "plugged in, not charging." Help, please.

  Dear Sir

  I'm having a strange problem. My laptop (HP DM3) shows "plugged in, not charging". I searched on the net and according to some expert instruction, I took out the battery, plugged, booted my laptop computer and since the Device Manager I uninstalled Microsoft ACPI compliant method control pile driver, then off, UN-pluged, inserted my battery, and then restarted again. My battery has shown that charge but after awhile it automatically installed stack method compatible ACPI Microsoft and my problem was back. Please give me a solution for this problem. I'm having extreme difficulties for her. Your kind response to the question mentioned will be highly appreciated.

  Concerning

  Mohapurush

  Hi Mohapurush,

  Compatible Microsoft ACPI control method battery component supports the Advanced Configuration and Power Interface (ACPI) control method battery, include an interface to control method of code ACPI Machine Language (AML) between the battery and the host computer.

  You can use any type of communication interface supported by ACPI and any type of battery because the battery interface is fully accessible by the AML code control methods.

  Battery monitoring and management are available only on compatible computers ACPI and APM-enabled. Windows can handle the batteries that have a smart battery subsystem interface or interface of battery method of control on ACPI computers. Windows can also monitor several batteries.

  I recommend you contact the manufacturers of the system and check the settings on your computer.

  HP Support Forums: http://h30434.www3.hp.com/

  See the following article for more information.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00821536&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=4221619

  Battery method control compatible ACPI Microsoft

  Keep us informed on the status of the issue.

• Method for controlling battery Microsoft acpi disables my battery on update.

  Hello

  
  I work with a Lenovo Y530 computer laptop (ab00216104). After a few years, the battery ceased to maintain a charge so I ordered a new third party like Lenovo temporarily stopped selling them. The new battery worked fine at first but, after a few minutes I get the message "battery plugged in, does not support" of the battery lower-left icon. It just stops charging the battery, but it will take place off the coast of the battery until it is unloaded. At first, I thought it was a bad battery however by many trial and error, I discovered the battery works fine. Let me explain.

  If I uninstall "control method battery compatible acpi Microsoft" in the Device Manager and reboot my computer with my card wireless off then the battery will work perfectly. It is not up to what I connect to the internet that it suddenly stops to load again. It is in the case once my computer is able to access to the internet and update of "control method battery compatible acpi Microsoft" that the problem occurs.

  As much, as I know there is no way to prevent it from updating once he establishes a connection and no way for "rolling back drivers" as long as this option is grayed out. I would be very happy any advice on this situation, thank you.

   

  Hello

  I suggest you to perform the following methods.

  Method 1:

  To enable or disable Windows Update driver manually on a single computer to research

  1. Click Start, right-click computer, and then click Properties.
  2. In the tasks list, click Advanced system settings.
  3. On the System Properties dialog box, click the hardware tab, and then click Windows Update driver settings.
  4. Select never check for drivers when I connect a device.
  5. Click OK twice, and then close the System dialog box.

  Method 2: install the latest drivers for chipset for laptop and the Coachman.

  If the problem persists, contact Lenovo support for assistance.

  Hope this helps!

• Microsoft ACPI Control compliant method battery M

  There is barely 20 minutes after battery fully charged. can it be fixed rather than buy a new one? I especially take the outlet which I have learned since then are not good.

  Hi Mauri,

  Thank you for visiting Microsoft Community Forum

  According to the description, the battery only lasts for 20 minutes after a full charge. I will definitely help you.

  1. What is the brand and model of the laptop?

  2 have you made any changes to the computer before the show?

  Battery problems are often associated with the battery itself. If you encounter this problem, you will need to contact the manufacturer.
   

  Install the latest drivers for chipset for laptop and the Coachman.

  If the problem persists, contact the manufacturer support.

  For more information:

  Solve battery problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-battery-problems

  Note: The steps apply to Windows 7

  Solutions to common battery problems

  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  Battery saver

  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  Let us know if you have other questions about Windows in the future.

• Satellite L30W - battery will not charge

  I have the new L30W 2-in-1 computer laptop,

  I used it the other day the power supply unplugged and since I put rear adapter in and since then the battery has not only increased the load and continuously says 69% (blocked, do not load).

  don't know how to solve this problem or too to get a precise reading of load

  Try this:
  Go to Device Manager and uninstall Microsoft ACPI Control method battery compatible you will find battery area (to extend this)
  Reboot the laptop.

  We greatly appreciate your comments

• New Windows 7, when it is plugged in, battery does not charge.

  I just downloaded Windows 7 Professional for my laptop, Acer Aspire 5535, and when I plug it in, it is said that it is plugged in, does not support.  It is stuck at 96% and go any higher.

  I rebooted, it disconnected, let him go down to 1% and hip again, and it will not load.

  Thank you!

  The following has worked for me.  I installed a new spare battery less than a week ago.  today I received the message "plugged in, not charging" which is generated by the Microsoft software, called 'Battery method control compatible ACPI Microsoft.'  I disabled this software and the battery started to load.  I have powered down, removed and re-installed just battery to make sure it was properly installed, rebooted and activated the software 'Compatible Microsoft ACPI Control method battery'.  everything seems to be back to normal.

• Satellite L50 - A - 19 p - 0% battery and not charging

  Hello
  Since this morning, I have problems with my laptop battery.

  Even with the domain controller is connected, the suspension of the battery at 0% not charging and after a few seconds, Windows goes to sleep by itself.
  I tried to start Windows in safe mode and the battery seems to work without even plugged DC so at 0%.

  Now I use the laptop without the battery and only with DC power.

  Is there something I can do to solve the problem?

  Thank you!

  Try to uninstall the ACPI compatible control method battery.
  This can be found in the device-> battery Manager

  Once the compatible ACPI control method battery driver disappeared (uninstalled), click on the 'Action' menu at the top of the window and select Scan for hardware changes.

  This should reinstall the removed driver...

  But if it does not solve the problem of battery, keep off compatible ACPI control method battery.

• Control method compliant ACPI Microsoft battery Driver

  My battery does not charge.  I know well uninstall the Microsoft ACPI Compliant control method battery Driver as a solution.  However, when I right click the icon and click on uninstall, it won't uninstall after restart or stop.  Is there another way to uninstall the drivers?  I've tried several iterations when that I start without the battery, battery, etc.  Nothing works.  Any help would be greatly appreciated!

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing. I want to ask you the following questions.

  1. What is the brand and model of your system?

  2. When was the last time it was working fine?

  This occurs generally when either the battery is bad or when there is a conflict with the ACPI driver. Try the following methods and check if you're able to reinstall the ACPI drivers.

  1. click on start and type device in the search for field, and then select Device Manager.

  2 expand the batteries category.

  3. under the batteries category, right-click in the list of Microsoft ACPI compatible with battery control method and choose uninstall.

  WARNING:  Do not remove the Microsoft AC adapter driver or any other compatible driver ACPI.

  4. on the Device Manager Taskbar, click Scan for hardware changes.

  You can also select Action > search the hardware changes.

  Windows will scan your computer for hardware which has not installed the drivers and will install the necessary drivers to manage the battery power. The computer should now indicate that the battery is charging.

  In addition, I also suggest you to update the system BIOS. You can do this, either by contacting the material supports for your computer or by downloading and installing your own from the manufacturers of the Web site.

  Warning in the BIOS: Change BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk. 

  Hope this information was useful. Return with the required information, so that we can research more on the issue and help you solve.

  Thank you

• MICROSOFT SAYS MY SYSTEM IS COMPATIBLE BY FAR, BUT FOR SOME REASON, THIS MODEL OF DELL DOES NOT ACCEPT IT.

  HELLO, I TRIED TO UPGRADE TO WINDOWS 10 MONTHS NOW. MICROSOFT SAYS MY SYSTEM IS COMPATIBLE BY FAR, BUT FOR SOME REASON, THIS MODEL OF DELL DOES NOT ACCEPT IT. I HAVE A DELL STUDIO 540, X 64 BASED PC. PLEASE HELP, I REALLY WANT TO TRY WINDOWS 10.

  Original title: WIDOWS 10 UPDATE

  If Dell has said that it is not compatible, I wouldn't do it.  Dell needs to have the drivers and software for it or it is not working properly.  I would make sure you call, email or web-chat with Dell and ask them first.

  If you really want to try anyway (at your own risk), you can, but I suggest that do you a full picture of backup of your computer in order to "undo" that and go back to the way you are today if something is wrong or you don't like it.

• I tried to reinstall microsoft 6to4 adapter #2 and need me addition inherited material steps, but it will not reinstall

  and need me addition inherited material steps, but it will not reinstall why it shows up.

  Its a hidden device. According to Device Manager menu click on "see the hidden devices. It should show up under network adapters.

• Battery is not charging

  My laptop will not charge even though it shows that it is connected to the AC and my battery is fast running down. connections are oks. Any solution?

  Hello

  It may be worth trying.

  First, stop the laptop, unplug the AC adapter unplugged, remove the battery and then press and hold the power button for a minute.

  Now, plug in the power adapter and start the PC without the battery inserted, start Notepad, open windows control panel, open Device Manager, expand the entry for the Batteries, do a right-click on the Microsoft ACPI compatible with battery control method and select Uninstall - do uninstall not something else here.  When the uninstall is complete, shut down the PC, unplug the AC adapter, reinsert the battery and then start the PC on just the battery.  Windows will automatically reinstall the driver - leave Windows running for a few minutes. Shut down the PC again.  Now plug the power adapter (with the inserted battery always) and start the PC to see if the battery now charging correctly.

  Best wishes

  DP - K

• Pavilion DV4T-1400 battery does not charge

  I was getting the flashing battery light on the battery then buying a new.  That solved the problem for about a week and now he's back.  I've updated the BIOS, tried to close, pulling on the battery, now the power button then reinstall and restart, but nothing changes.  I blew the dust just in case it was due to overheating.  Still no change.

  Is there another way to solve this problem?  I usually keep the laptop plugged in anyway so I'll just continue to do unless there is no other solution unless this means that HP is on its way.

  Hello

  First, stop the laptop, unplug the power adapter, remove the battery and then press and hold the power button for a minute.

  Now, plug in the AC adapter without the battery inserted, start Notepad, open windows control panel, open Device Manager, expand the entry for the Batteries, click right on and the Microsoft ACPI compatible with battery control method and select Uninstall - do uninstall not something else here.  When the uninstall is complete, shut down the PC, unplug the AC adapter, reinsert the battery and then start the PC on just the battery.  Windows will automatically reinstall the driver - leave Windows running for a few minutes. Shut down the PC again.  Now plug the power adapter (with the inserted battery always) and start the laptop to see if it helped the issue at all.

  I wait to hear from you.

   

  !------------------- Please click on the star of CONGRATULATIONS on the left to say 'thank you '. Check the box "Accept as Solution" if she answers / solves your problem. Thank you-----------------------------------------------------------------!

  I am an employee of HP.