Microsoft has never issued an update for the Win7 disk defragment utility?

Microsoft has never issued an update for the Win7 disk defragment utility?  Thank you.

Original title: Win7 updates

To my knowledge, the Defragmenter from Windows 7 has not been maintained since the liberation.  You have a problem with it?

Tags: Windows

Similar Questions

  • Microsoft has a driver that works for the Vertical Mouse 4 change?

    Agency admins allow for some drivers.  My mouse is now since 2006.  It is unlikely that they will download from the company.  Microsoft has a that can change its functions?

    When you hit the back button accidentally, the work is lost.

    Agency computer is an HP laptop with dock, running Windows 7.

    Hello

    To check the availability of the driver for your mouse on your computer, please follow the steps below:

    1. In your Start menu, select Control Panel.
    2. Find and select the mouse.
    3. Click on material.
    4. Click on Properties.
    5. Select the driver and click on Update Driver...

    This should start the update of the driver available for your mouse.

    Let us know how it goes.

  • Why the Time Machine has been slain in 'update' for the days?

    My time Machine apparently has been "frozen" in the update mode days.  The last update indicated was four days; for at least two days the backup flash drive was quickly / blinking constantly as it does by updating. Icon Time Machine on Finder devices activity showed the constantly rotating circle ("update"). Time Machine preferences update status bar has been frozen at about 2% of the way across.

    FYI, a few days ago, a break of a few seconds completely stops the iMac - this time could possibly coincide with the beginning of this "freeze".

    I cut and restarted does not.  Your advice will be welcomed-thanks

    a few things could have happened, but is not limited to a failure or a bad drive.

    I reboot, check the source disk and make all necessary repairs with disk utility.

    If the problem persists, you can also check the disk of destination for damage.

    On what your source disk to destination and how the destination disk is connected to your mac? If it's USB it's thanks to a keyboard or a hub? If so plug it directly into the built computers USB port and do not deviate in a chain of USB devices such as a hub or keyboard.

  • I get the error 646 while installing updates: ___Update et seq. for __Security of Microsoft Office Word 2007 (KB974561) update for the 2007 Microsoft Office System (KB973704) __Security update for Microsoft Office Excel 2007 (KB973593) ___Please help. ___

    Hello

    I'm on Win Vista Home (32 bit) Balto.  Only new things I did was install a recorder sony cd/dvd player and also a D-link (DIR-655).

    I tried several times install the identified updates and always "646" error message appears each attempts failed.

    Help, please.

    nxtr

    With respect, do you than all the other threads in this forum about the error 646 & updates updated Office?

    for example, http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • A security update for the 2007 Microsoft Office System (KB976321) __Update to filter junk e-mail in Microsoft Office Outlook 2007 (KB981726)

    Update of security for Microsoft Office System 2007 (KB976321)
    Update for the junk e-mail in Outlook 2007 (KB981726) filter

    I have problems with the loading of these two updates on my computer.  Whenever I try, I get an "update failed" notice.

    These are the two only updates with that never got hurt.  I have a notebook hp compaq with Windows Vista.

    Flawed updates or am I doing something wrong or need to change a setting somewhere?

    Thank you, Bob

    http://www.Microsoft.com/downloads/en/default.aspx

    Put the KB numbers in the search at the above link > download them manually.

    If this does not solve it:

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • I have recently installed Windows 10 free update.  Now I am unable to delete .pdf files and get the invalid error message "Function MS-DOS."  It has never been a problem with the previous Windows 8.1.  I contacted Microsoft technical support and I was tol

    I have recently installed Windows 10 free update.  Now I am unable to delete .pdf files and get the invalid error message "Function MS-DOS."  It has never been a problem with the previous Windows 8.1.  I contacted Microsoft technical support and they told me there is a problem with the .pdf application and I need to contact Adobe Acrobat. This can be corrected?

    uninstall any version of acrobat is installed.

    clean by Download Adobe Reader and Acrobat tool - Adobe Labs

    Restart your computer.

    delete all to delete pdf files.

    If this fails, it is a problem of ms.  If this attempt is successful, then reinstall your acrobat.

  • Microsoft has stopped issuing licenses for windows 2008R2 Enterprise edition?

    Please specify if Microsoft has stopped issuing licenses for windows 2008 R2 64-bit Enterprise edition.

    Kind regards

    Aravind.

    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.msdn.Microsoft.com/forums/en-us/home

  • Updates for the 2007 Microsoft Office Suite (business)

    My updates of Windows there are two available, when important updates downloaded and installed, Windows Update tells some updates have not been installed.  Failed: 2 updates.  Code 80070641 Windows Update encountered an unknown error.  The Microsoft® 2007 Office Suite Service Pack 2 (SP2)

    Download size: 207.4 MB

    You may have to restart your computer for this update is taken into account.

    Update type: Important

    Service Pack 2 provides the latest updates to the 2007 Microsoft Office Suite.  This update applies to Microsoft Office Project, Microsoft Office SharePoint Designer, Microsoft Expression Web, Microsoft Office Visio and Visual Web Developer.

    More information:
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=B444BF18-79EA-46C6-8A81-9DB49B4AB6E5&displaylang=en

    Help and Support:
    http://support.Microsoft.com/?ln=en-us

    and:

    Update for the junk e-mail in Outlook 2007 (KB968503) filter

    Download size: 3.3 MB

    You may have to restart your computer for this update is taken into account.

    Update type: Important

    This update provides the filter of junk e-mail in Microsoft Office Outlook 2007 a more current definition of which e-mail messages should be considered junk e-mail.

    More information:
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=04C02D0A-B1AE-4097-9643-81968081DD9C&displaylang=en

    Help and Support:
    http://support.Microsoft.com/?ln=en-us

    Now, I've exhausted my options here, can someone please inform me as to how I can solve this problem?  I respectfully request for a known solution, not what you think will solve the problem.  My OS is Vista Home Basic 32-bit.

    Thanks in advance to anyone who can solve this problem.

    Hi sallampat,

    Thanks for posting the Answers.Microsoft.Com Community Forum.

    I suggest start in a cleanboot, then try again your updates.  Download updates to a folder on your desktop, then start in a clean boot, then try the updates.

    We will follow the following steps

    1. start the CheckSur tool by - http://support.microsoft.com/kb/947821

    2. download the updates you referenced from this site: http://www.microsoft.com/downloads/details.aspx?familyid=04C02D0A-B1AE-4097-9643-81968081DD9C&displaylang=en and http://support.microsoft.com/kb/953195 download them and put them in a folder that you create on the desktop of your system.

    3. start your system by using the cleanboot procedure described below;

    To perform a clean boot on a computer that is running Windows Vista, follow these steps.

    1. Click Start

      type msconfig in the Search box and press ENTER.

      If you are prompted for an administrator password or a confirmation, type the password, or click continue.

    2. On the general tab, click Selective startup.
    3. Under Selective startup, clear the Load Startup items check box.
    4. Click the Services tab, select the hide all Microsoft Services check box, and then click disable all.
    5. Click OK.
    6. When you are prompted, click restart.
    7. After the computer starts, start the program or game and see if the problem is resolved.

    (Here is the article from the base of the boot process minimum - http://support.microsoft.com/kb/331796 - after troubleshooting is completed, use the steps listed in the knowledge base article to restore your system back to the normal mode).

    4. when your system is loaded into a clean boot - run an update at the same time in the folder that you downloaded on.

    After completing updates or to work on the updates that your system to a normal operating state, following the process of clean boot above, but turn on where to disable services were selected previously.  (The KB describes the entire process.)

    Please keep us informed on this issue if more information is required.

    Kind regards

    Debbie
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Update for the application manager has failed. Impossible to reinstall. Cannot use my apps. Get the 43 error message when I try to re - install. Is it possible to fix this problem without a wipe and load?

    Update for the application manager has failed. Impossible to reinstall. Cannot use my apps. Get the 43 error message when I try to re - install. Is it possible to fix this problem without a wipe and load?

    Error 43 https://forums.adobe.com/thread/2070909

  • Where update my credit card information. My credit card has changed and I don't know where update for the monthly plan.

    Where update my credit card information. My credit card has changed and I don't know where update for the monthly plan.

    Br25,

    For assistance to change the credit card on your account, please visit this link

    -https://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting-cr creative - cloud.html

    (1) connect to www.adobe.com. The sign in link is on the menu at the top of most pages.

    (2) (if you are connected from other pages of the adobe.com website, click on your name in the top navigation bar).

    (3) in the navigation pane or a context menu, click on manage account.

    (4) according to Plans & products, click on manage the Plan.

    (5) under payment details, click on Edit payment details.

    (6) make appropriate changes in the Edit popup payment method and then click Save.

    Please note:

    Your billing address and credit card must be in the country of the version you purchase.

    Guinot

  • It will never be a 3D for the Qosmio F750 update?

    Don't you think that it will always be an update for the use of 3D with games or other applications beside using Kevin screenmode and iz3D utility?

    I've heard rumors that Toshiba is planning something for the 4th quarter...

    > Do you think that it will always be an update for the use of 3D with games or other applications beside using Kevin utility screenmode and iz3D?

    + Qosmio F750 portable free glasses 3D - content taken in charge and software +.
    http://APS2.toshiba-tro.de/KB0/TSB1A037N0000R01.htm

    3D still images (planned to be supported)

  • Excite the situation of update for the AT10LE - A-> Pro

    Hello

    I was wondering about the status of update for the Toshiba excited Pro.

    _Specifically: _

    -It's going to be an Android 4.3 or 4.4 update? After all, it's a tablet of the premium segment, and I expect the usual level of support. Another manufacturer usually release one or two updates.

    -is yet to come miracast? He promised during the liberation, but then he got the silent about it.

    -the problem of thermal regulation has finally been resolved? Again, this is not rocket science, other manufacturers seem to be able to produce pills that work without overheating.

    -It will never be a way to root it or unlock the bootloader?

    I'm sorry if this seems critical, but given the reviews I had read, I think that these issues are very relevant.

    Updates for both devices excite Pro 3 G and WiFi were released last week.

    Excite Pro AT10LE - A WiFi-> update V4.3.001120220.05
    Excite Pro 3G AT10LE - A-> update V4.3.201121220.35

  • NET framework 3.5 service pack 1 & net framework 3.5 family update for the net version 2.0 to 3.5 (kb951847) x 86(update1 of 1)

    NET framework 3.5 service pack 1 & net framework 3.5 family update for the net version 2.0 to 3.5 (kb951847) x 86(update1 of 1)

    Hello

    1. what exactly is the problem you are having?

    2. do you have an error code?

    3. do you get an error message?

     
    I suggest you install the standalone product of the update and check if it helps.

    Microsoft .NET Framework 3.5 Service Pack 1
    You can download the stand-alone version of the link below: Microsoft .NET Framework 3.5 Service Pack 1:
    Microsoft .NET Framework 3.5 Family Update for Windows XP x 86 and Windows Server 2003 x 86
    http://www.Microsoft.com/en-US/Download/details.aspx?ID=10006
     

    For reference:

     
    When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".

    http://support.Microsoft.com/kb/923100
    Problem installing .NET Framework 3.5 or 3.5 SP1 on checked, or pre-release versions of Windows Vista or Windows Server 2008:
     
    I suggest you to give us more information about the issue to have a better understanding.
     
    I hope this helps.

  • Where can I find the update for the windows platform. In addition, MSN Plus Live does not work.

    Original title: confused

    OK im a little confused.

    where can I find the update for the windows platform.

    I want to download the new msn, but I do not have windows update of the platform and can't find it anywhere.

    also my more live msn! has not worked.

    Help, please. Thanks x

    Hi Meg,
     
    Try to move to the next step to get updates for Windows Vista platform.
     
    The platform for Windows Vista update can be downloaded from Windows Update. To obtain these updates, follow these steps:
     
    1. Click Start, click all programs and then click Windows Update.
    2. in the navigation pane, click Find updates.
    3. when updates are found, click on view available updates.
    4. Select the package update that you want, and then click on install.
     
    For more information, see: http://support.microsoft.com/kb/971644/
     
    Regarding MSN more Live and MSN, your question would be better suited to Windows Live help community. Please visit the link below to find a community that will provide the best support.
     
    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Update error... I tried to update for the month and each time it fails

    I tried to perform updates for the month and each time it fails.  I get the same error message... Code 646 WIndows has encountered an unknown error.  I did troubleshooting and you are unable to find assistance.  I don't know much about the workings of the computer, but I know that I should be able to perform these updates.  I think I need it too.  I have 9 at this stage that it cannot load.  Help, please!

    I tried to perform updates for the month and each time it fails.  I get the same error message... Code 646 WIndows has encountered an unknown error.  I did troubleshooting and you are unable to find assistance.  I don't know much about the workings of the computer, but I know that I should be able to perform these updates.  I think I need it too.  I have 9 at this stage that it cannot load.  Help, please!

    This link leads to a response from Bobby Mi, moderator.
    Date: July 6, 2010
    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/18449f60-C149-4EAF-B8E6-a2880cd7232b

    Bobby Mi response will lead to this tutorial from Microsoft Support:
    http://support.Microsoft.com/kb/2258121

    Hope this can help solve your problem.
    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

Maybe you are looking for