Microsoft Safety Scanner crashes when you perform a full crawl

Similar Questions

• Microsoft Office regularly crashes when you perform a save as on a network location mapped

  Microsoft Office regularly crashes when you perform a save as to any place of the network off the internal hard drives on my laptop. The version is 14.0.6112.5000 (64-bit).

  The question seems to relate to a problem with the Windows Explorer, I find that if I first open the folder by browing through Windows Explorer crash is much less likely to occur. It is not always, but usually after the 4th or 5th attempt I can save the document. Once I made the first save as a new document, I didn't backup after problems.

  This happens only with the Office suite of products - I have no similar problems with third-party programs.

  What is happening is the Save dialog box under opens, but when I try to navigate through the program crashes. I can usually (but not 100% of the time) scroll to reach readers intgernal, but almost always crashes when you try to reach the network mapped drives unless I have already sailed on these places by car outside the word.

  It is a relatively new problem. I did a clean install of Windows 7 (x 64) on my laptop in November 2011, everything was fine until April. My thought is that a .dll file is corrupt, or there could be a problem of accidentally unplugging a smartphone or Tablet without ejecting it first.

  Suggestions are greatly appreciated, I really don't want to go through the hassle to do a clean install and then restore all my programs again.

  Thank you!

  Julie

  I think that the first thing would be to try a repair.
  Start > Control Panel > programs and features > click on your Office installation > click Change > repair

  I hope this helps.

• Flash 11.8 beta crashes when you exit the full screen

  Flash 11.8 beta plugin crashes when you exit the full screen.

  * The crash of the plugin that brings in ComodoDragon 26.2.2.0 and Firefox21.0

  * The accident occurs in Flash 11.8 beta only

  * Flash Player 11.7.700.202 not crushed.

  * The accident happens on Wndows7x64 and WndowsXPx32 as well

  Steps to reproduce:

  1. install the Flash Player 11.8.800.50

  2. run ComodoDragon 26.2.2.0 or Firefox21.0

  3 open http://www.youtube.com/watch?v=55s3T7VRQSc

  4. click on the icon at the bottom right of the video fullscreen

  -observe the Flash video becomes fullscreen mode

  5. press ESC to exit full screen

  -observe the Flash pluin crashes

  Actual results:

  The Flash plugin crashes

  Expected results:

  The Flash plugin should not fall down.

  The video should play continue.

  Hi, it is already known.

  https://Bugzilla.Mozilla.org/show_bug.cgi?id=869838 = adbe 3556886

  https://Bugzilla.Mozilla.org/show_bug.cgi?id=772097 = adbe 3550712

• Lightroom 3.2 crashes when you perform a filter text library on all photographs

  I have LR 3.2 running on Windows XP on an Intel Core 2 E8500 with 4 GB of ram.  I run a catalog that contains a little more 51 000 photos (especially RAW images).  Whenever I select all THE PHOTOS (in my menu catalog drop down to the left), go to the library filter, choose TEXT and type a keyword to search to refine my pictures down, LR spontaneously blocks... everything I get a message Microsoft asks me if I want to send a report to Microsoft and when I click on 'no '. LR just closes.  Sometimes, when I re - open LR and perform the same task immediately, all right.  But lately, he arrives again and again even after I restarted LR again and again.  It is simply unacceptable that I constantly need to search my entire catalog to find pictures with keywords depending on the project, I'm working on that.  My catalog is too large?  Finally, I optimized my catalog on 08/10/2010.  This seems like a bug to me.

  Sorry if this is a problem already discussed... I ran a search and did not find discussions about this.

  Sorry if this is a problem already discussed... I ran a search and did not find discussions about this.

  http://forums.Adobe.com/message/2986231?TSTART=0#2986231

  http://forums.Adobe.com/message/2954754#2954754

• When you perform a full backup in Windows 7, is also trying to save the destination drive

  Hello when I do a backup on my computer he wants to save the destination for my backup disk. I use the Windows 7 professional 64-bit operating system. I know that he cannot back up the drive on which the backup happens. How can I prevent that from happening.

  Hi FrancisEarley

  Yes, the backup can not be performed if the destination drive is selected in the backup list, if it is selected, then be sure to uncheck this drive and then proceed to the backup or if you want to include this backup disk, and then you must select a different destination location.

  For example, you can't back up the contents of drive E: to drive E:

  You can follow the steps of manual backup and verification-

  (a) open Backup and Restore.
  (b), select 'Configuration Backup' or 'back up now '.
  (c) and then in the list to save drivers deselect the destination drive, if it is present in the backup list and move forward with new steps to perform the backup.

  Refer to the below help links -.

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  http://Windows.Microsoft.com/en-us/Windows7/how-does-Windows-choose-which-files-to-back-up

  http://Windows.Microsoft.com/en-us/Windows7/where-should-I-save-my-backup

  I hope this helps.

• Error code 0 x 80042407 when you perform a full recovery Vista

  Hi, I made the backup of my operating system on more than one device, a 360 GB USB HDD, one a 640 GB SATA HARD drive internally and the other on a 2 to external HARD disk.  My new HARD drive is a 640 GB drive. I get this error msg any device I use for recovery complete. I don't know if I have the experience to do things in the command prompt if someone can help me?

  Hello

  I suggest you follow the steps mentioned below.

   

  Step 1:

  Disconnect the external hard drive, i.e. 360 GB USB HDD (hard drive) and 2 TB of HARD drive.

  Step 2:

  Run the clean command. Follow the steps mentioned below.

  a. Click Start and type cmd in the start search box and right-click on the cmd present in the menu.

  b. click on run as administrator.

  c. type the following commands as follows.

  DiskPart

  List disk

  Select disk 0 (if drive 0 is listed)

  Clean

  d. check if you are able to recover the system.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to run Microsoft Safety Scanner, I get an error signatures are not signed error code: 0x8050A005.

  When I try to run Microsoft Safety Scanner, I get an error that the signatures are not signed (x8050A005)). Can someone help me with this?

  I suggest the Windows Defender update and run full system scan with it. Windows 8 build already with Windows Defender, which is anti-virus and Anti-Spyware.

• Windows crashes when you use any application and stops in hibernation mode

  Hello people who might be able to help me,

  I come back from summer vacation and turned on my computer with windows 7 at first all seemed fine until I wanted to open an application. Opening was always very well, but when I did something on this subject, it crashed. Also my PC then stops in the hibernation mode. I can access internet, but nothing else. Then I tried to recover my PC. It turns out I have no recovery points and can only restore factory mode that sucks. Now that was new, since always, before I could restore my PC to a previous session without making any restore points. What can I do to restore my PC and ban these errors?

  Hello Nicolas,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1 did you receive no error message or code when the application or the system crashed?
  2. What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur because settings to corrupt, or because of the presence of unused files in Windows. This can also occur due to the presence of any virus or malware.

  I appreciate the fact that you want to restore your computer. However, until you do, I suggest you to try the following methods and check if it helps.

  Method 1:
  Resolution of performance problems and check.
  Reference:
  Open the troubleshooter of Performance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Please also run convenience store power.
  Reference:
  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  If this does not help, use method 2.

  Method 2:
  Microsoft safety scanner run and check the issue.
  Reference:
  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Microsoft safety scanner saying TrojanClicker:Win31 / Yabector.A is partially removed

  Said Microsoft security scanner that trojanclicker:Win32 / Yabector.a partially removed.  How to completely remove the thing.  Must be simple enough for me to be able to manage it.  Help!

  Hello

  You do not specify your version of Windows. This troubleshooting should work with Windows 7
  Vista or XP.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of the malware: Vista is similar to Windows 7, XP use RUN rather
  Start - Search and there is no RUN AS ADMIN option.

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

• Window and the mouse crashes when you try to close the windows

  Original title: window crashes when you click on the red X

  I use Windows Vista Home Premium (64-bit platform).  Just recently, when I right click on the red X in the upper right to close a window, the window and the cursor freezing for about fifteen seconds.  The window then closes, and the slider works normally.

  This happens to my office, although my laptop (same operating system Vista, except for the 32-bit version) works normally.  I use CCleaner on a regular basis, and I have the latest version of AVG anti-virus and Microsoft Security Essentials installed.  This Setup has worked well for over a year.  This problem appeared only in the last 24 hours.

  Gordon

  Houston, Texas

  Hello, Mr. the President Y. K..

  First, as soon as the computer and then restarting it later in the day, the question has not repeated itself.  I had read on Google that people with this problem a couple of years, were not so lucky.

  I have not addded any software, except to perform Windows updates usual a week ago.  The suddenness of the appearance of my problem led me to believe that these patches were probably not at fault.  When I went to log on to this second time, I had planned to restore the system to a previous backup to see if that gave me work around the problem.  However, it was not necessary.

  No error message appears when the problem occurred, and the problem was if I was in the office or on the Internet.  Nevertheless, I intend to register your comments useful diagnosis for later use, and for your efforts, thank you very much!

  Kind regards

  Gordon

• I have error vowsem216dll come often when you turn it on and when you perform updates

  I have error vowsem216dll come often when starting up and when you perform updates today has 32/ntdll.dll error. How do I sort them?

  Many had / have Windows 98 so far.  He may not be able to access most of the internet, but it works.

  You upgrade the computer to another operating system platform?

  Windows XP is more supported by Microsoft but as long you are able to locate the drivers/software to operate, do. Windows 8 is developing so I wouldn't waste my money on Windows 7 right now.

  Restart the computer and the logo of the manufacturer, start typing F8

  Select Mode safe mode with networking

  Download the following tool and run a full system scan to exclude the malware.  If your system is infected your anti-virus software will have been compromised.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  You receive messages such as:

  Rundll32 - this program has performed an illegal operation and will be shut down.

  RUNDLL caused a General Protection Fault in module MMSYSTEM. DLL to 000's: 00000032

  Search for a file located in c: \ windows------vowsem 216.le dll

  After that the file is associated (application/program)

  The only reference I can find about vowsem216dll is on yahoo or pharmaceutical products of brand vowsem responses

  http://UK.answers.Yahoo.com/question/index?QID=20081001095149AAvpVDo

  Start > type MSCONFIG

  Search for list of vowsem and uncheck the box

  Click on apply, Ok

  Restart the computer

  Check do not show me this again in the Configuration window.  It will show at startup, and except if you check the box to not show it will nag.

  Click Start > run

  Type System.ini

  Click OK

  Search for mmsystem

  If this line does not exist, add it.  Save and close the System.ini

  Restart the computer

• My MMC crashes when you try to add the Certificates snap-in

  My MMC crashes when you try to add the Certificates snap-in

  Error: Microsoft Management Console has encountered a problem and needs to close.

  When to see the details, it shows a mfc42u.dll error.

  Hey Sankar,

  Try Mircosoft Fixit: http://support.microsoft.com/gp/slow_windows_performance

  You will need to authenticate Windows.

• Other download links for Microsoft Safety Scanner?

  I tried to download Microsoft Safety Scanner http://www.microsoft.com/security/scanner/en-us/default.aspx for more than a dozen times now, but still it is interrupted. I have more virus in my computer, it's just that I think that my Internet connection is too slow. My cousin asked me help on how to get rid of a bunch of virus on his computer at home, that I offered help by using the Scanner, as I do for my friends over the past two months. (I never asked them for anything in Exchange). Do you have any other download links for Microsoft Safety Scanner? I can't try to download. I tried to go outside in cafes Internet just for the download, but its still the same and even worse, computers on these places are full of virus. Other links? Torrent or maybe? (they never get interrupted).

  PS.
  Do you know how to get rid of the trojan dropper and startpage? Theyre the virus which has been troubling my cousin for a while now...

  http://answers.Microsoft.com/en-us/protect/Forum/protect_scanning/help-me-i-cant-complete-the-download-of-the-safety/a4f5cd65-3192-450F-A038-861c15acb831

  I. - delete your temporary files

  Click Start > all programs > Accessories > System Tools > Disk Cleanup

  II. - have your system scanned as a result of security/antivirus installed.

  III. - run this tool from Kaspersky: how to remove malware belonging to the family of Rootkit. Win32.TDSS

  http://support.Kaspersky.com/viruses/solutions?QID=208280684>

  IV. - download, install, update and run both of these tools to a-squared free scans:

  MalwareBytes anti-malware (MBAM)

  http://www.Malwarebytes.org/products/malwarebytes_free>

  SUPERAntiSpyware (SAS)

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html>

  V-1. open IE 32-bit (only) to https://consumersecuritysupport.microsoft.com/

  2. click on I think my computer is infected

  3. on the resulting page, click on run the Microsoft Safety Scanner

  4. Select appropriate service bit

  Download - 32-bit

  Download - 64-bit

  then click CONTINUE

  VI. - http://safety.live.com.

  VII. - https://support.microsoftsecurityessentials.com/ and select the link that says - I think my computer is infected

  UTC/GMT is 08:40 on Friday, March 16, 2012

• Microsoft safety scanner shows Trojan:WinNT / Alureon.S only partially removed

  Having the virus that made the laptop unusable. Microsoft safety scanner ran and he removed three other viruses but it's only partially removed but doesn't tell me how to get rid of completely. Under XP. Apreciate any help.

  Having the virus that made the laptop unusable. Microsoft safety scanner ran and he removed three other viruses but it's only partially removed but doesn't tell me how to get rid of completely. Under XP. Apreciate any help.

  Honestly, this is not the appropriate forum to deal with malware as serious as Alureon and its variants. I would recommend that you post your question in the support section of the malware from the forum on the link below. Alueron is a rootkit malware and should be treated using the interactive help trained. The forum is completely free, although you must register to post. This requirement prevents "spamming" and drive - by display.

  Repair-Bots online

• Backup Windows XP does not seem to be clear the attribute archive when you perform a normal backup.

  Backup Windows XP does not seem to be clear the attribute archive when you perform a normal backup.

  I do a backup of the 'Normal' at the beginning of the month.  Then, at the end of the first week, I do a "Differential" backup (using the same "backup job" but change to type "Incremental".)

  Well the difference is huge and to study, I see that a lot of files that I don't know that I didn't take the week since the 'Normal' backup have the Archive attribute set.

  Is the 'Normal' compensation not the bit mode backup of archive?  Another thing would be randomly set the attributes to archive?  Is there a ghost in the machine?  Inquiring minds want to know.

  Hello

  Differential backup marks files as having been backed up (in other words, archive attribute is not cleared). This is normal.

  For more information please visit:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/types_of_backup.mspx?mfr=true
  http://msdn.Microsoft.com/en-us/library/aa174458 (SQL.80) .aspx
  http://msdn.Microsoft.com/en-us/library/ms345448.aspx

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]