Microsoft Sync Center with Windows server 2003 and Windows 7 questions.

Similar Questions

• I have VSS enabled on my server sp2 Windows server 2003 and out of no where the tab versions previous disappeared...

  I have VSS enabled on my server sp2 Windows server 2003 and out of no where the tab versions previous disappeared for all users when you access from anywhere.  I deactivated and reactivated the snapshots and it won't come back please advise...

  Hello ErekBye,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows Server 2003 and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Best regards

  Matthew_Ha

• Cannot install KB979909 and KB979906 for Windows 2000, Windows Server 2003 and Windows XP

  Original title: Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 security update for Windows 2000, Windows Server 2003 and Windows XP x 86 __Microsoft .NET Framework 1.1 SP1 (KB979909) update for Windows 2000 and Windows XP (KB979906) __KB979909)

  I was warned, I got updates, I clicked on install

  he installed an and failed both

  I can't determine how to solve this problem, and the little shield that warns me still here says I need to update

  the explanation refers to the sp?

  IM unaware of what these elements affect

  See the RESPONSE message in this thread: http://social.answers.microsoft.com/Forums/en/vistawu/thread/5dc22ff1-ba9a-4a3a-9f19-49e85908c4c9 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows XP Setup: Netframework 2.0 SP2 on Windows server 2003 and generic process for win 32 services

  I have Windows XP. Since May 15, when I open and close my PC, the same updates seem to be installed: Netframework 2.0 SP2 on Windows server 2003 and Windows XPx86 KB2804577 and successfully installed several times per day, approximately 33 in total so far. Is it OK? How can I stop it?

  In this time (also some time before)

  When I open my PC a pop up displays: generic process for win 32 services... to allow or not allow.

  Then: I have not authorized it.

  I will allow, when he will appear again?

  and that's why the same safety NET Framework 2.0 appears again and again, when I open and close the PC?

  What should I do?

  Kirsten

  Dot Net 2.0 has an update to 'fix' his kb928365

  Also, the 2.0 is old enough, have you tried to update for .net 3.0 or 3.5

  Try this link to update 2.0, youre problems will probably end.

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=21

  Also, once installed, go to windows update...

• reinstalled Windows Small Business Server 2003 and Intranet failed during installation

  I had to reinstall Small Business Server 2003 and I can't after setting up where Exchange, etc. are installed. It passes through Exchange perfectly and blocks on the Intranet tools on Disc 3. I use the "fixed" CD because the 3 original drive was corrupted when we bought SBS2003. Our version is the original pre-service pack 1. Is there anyway to download a disk image 3 where my disk is damaged? It seems good, no scratches, scratches or dirt.

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Mouse Vista freeze for mobsync.exe (Microsoft Sync Center)

  Hello

  My Vista system had mouse freeze for 10 or 15 seconds every few minutes for some time now, too long for me to start simply undo the restore points. I read what is on the net about others who have had the same problem and tried many patches, but without success to get rid of or even change the problem.

  I have a MS optical blue USB mouse, running on an ultimate Vista update install on a Dell workstation. Gel mouse is often coincides with the hard disk activity, so I tried to decommissioning and anything that may run intermittently the hard disk in the background, but once again without any effect on the problem of indexing.

  Recently, I brought up the Task Manager and left open. A few minutes later when gel mouse happened again, I saw "mobsynce.exe" appears in the list of processes, and then disappear a few seconds after the mouse resurrected itself. That's what happens whenever the mouse crashes, at least on my system.

  I had never heard "Microsoft Sync Center", and read on this subject on MS gave me not a lot better understand why it's popping in and out, as if it were. I tried to turn off all the files and readers, without changing the frequency of freezing.

  MS wrote of Sync Center can not be disabled or uninstalled. I have not all attached to my machines, I know mobile devices. I am on an intranet home, and I have the HP MediaSmart Server on this network, as well as some other machines.

  In Sync Center, I have nothing that could be stopped to be synchronized, no evidence of errors, etc. Its only function on my system, seems to be to freeze my dozens of mouse of times every day.<|:-)>

  Anyone know about this feature from the center of synchronization and how to behave and leave my mouse only or even what the devil Sync Center is supposed to be for? Is there something to do with it being a USB mouse that makes the Center Synchronization think to check for "synchronization"?

  As part of the 'trying everying that everyone has suggested on the net regarding the mouse Vista freezing problem', I have installed/uninstalled drivers for this mouse mouse, but also using some generic driver for Vista is here. No change to anything. I have not tried switching to the a PS/2 port, but only because what I read just said he is indifferent to the problem.

  Thanks for your help with this.

  Ian J.

  For all the world's information...

  I rebuilt the USB stack and introduced to the mouse backwards to a USB mouse. I experienced the same problem as before, gel apparently slightly worse, which makes the mouse unusable. The only solution that worked in my situation is plug the USB mouse with a PS2 port adapter and use it that way. There are still sometimes 'breaks' but not gel, and they may have other causes.

  Ian J.

• Net work with Win Server 2003 Logon

  I have a problem to connect to a running with Win Server 2003 Net Office job, my OS Win - 7 professional 64-bit desktop above. Then the system Win-7 sailed into this network and integrated into the field of the system?  are there procedures that could help maintain the system in his?

  This issue is beyond the scope of this site (for consumers) and to make sure you get the best answer, we need to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Server 2003 and black screen after startup

  I created a P2V using Symantec Recovery 2010.  I made a few of them in the past, and this is the first time I had no problem.  The complete p2v without no problem, generate a large vmdk file.

  1. create a new virtual machine in VMWare Workstation 7.1, by selecting the Server 2003, 2 cores, 4 GB of ram (even as a physical host).  Turn on and you get the screen Server 2003 and after that, you get a black screen.

  2. I tried F8 for Mode safe on the 2003 Server screen.  It works and I am able to start under server 2003 in safe mode.

  3. when the black screen comes up, I can see a lot of action hard disk for a few minutes and then it stops.  I let it sit for a few hours without change.  I also tried to reboot a few times to see if it changed anything.

  4. my ditch last effort was to create a whole new p2v, which has exactly the same problem.

  Any other ideas?

  You may need to disable the hardware is no longer available via safe mode

• Windows Server 2003 and MSXML 6.0

  I need to install MSOffice 2010 on a server that is running Windows Server 2003 SP2, unfortunately I encounter the error:

  The installation program is unable to act because of the following error:

  The installation of MSOFfice 2010 requires MSXML version 6.10.1129.0 to be installed on your computer.  Install this component and restart the installation.

  Fairly straightforward error message, I have so from Microsoft Core XML Services (MSXML) 6.0 Service Pack 1 and went to install this.

  Unfortunately, I encountered a problem when trying to install MSXML6.0, which is:

  This installation package is not supported by this processor type, contact your product provider.

  I guess I'm trying to use an incorrect version of the MSI, but I can't seem to find anything other than:

  msxml6_ia64.msi

  msxml6_x64.msi

  msxml6_x86.msi

  Who all seem to not what I'm looking for, I tried google MSXML 32 bit but without much luck.

  I was wondering if thing exists or if anyone has any advice that could help me please?

  Thank you very much for looking.

  Kind regards.

  Hello

  The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Office 2010 - planning, deployment and compatibility TechNet Forums

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Quosmio G20-106: issue of Windows Server 2003 and the Fn keys +.

  I installed Windows Server 2003 on my Quosmio G20-106.

  After I installed all possible drivers and saving Toshiba download area, I have still 3 features in the "Other devices" section: eHome Infrared Tranciever, network card and the PCI device.

  In addition, Fn + keys do not work, I can not change the brightness.

  Any ideas?

  Hello

  Well, as far as I know the Qosmio G20 was delivered with Windows XP MCE.
  I found the drivers on the Toshiba site, and it seems they are designed only for Win XP and Win XP MCE. In this case, it is possible to s as the FN keys and other devices don't work.
  Nevertheless, it seems to install the LAN driver and modem driver.

  I found on the Web from Toshiba site a FAQ How to identify an unknown device
  Please visit this site:

  http://support.toshiba-tro.de/KB0/TSB57014E000QR01.htm

  Good bye

• -name of the server is not accessible you could are not allowed. I used windows server 2003 and windows xp as a client, the error is delivered in windows xp

  -name of the server is not accessible you could are not allowed. I've used windows server 2003 server and windows xp as a client, we use workgroup

  comed in the client error when we open the Working Group

  Hello

  Questions like these are much better handled in the TechNet IT Pro Forums.

  My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads
  Jack-MVP Windows Networking. WWW.EZLAN.NET

• What product Vmware is the best for several Windows Server 2003 and 2008 implementation

  Hi all

  I am just wondering that if I installed VMware on Windows Server 2003 Standard Edition and Windows Server 2003 Enterprize edition on VMware I was able to use more Ram installed, our server have 48GB of Ram but Server 2003 Standard allows only 4 GB max to use, to save money, I was wondering just if I can use the way I mentioned above.

  Looking at it, I think you have a misconception about the limitations of VMware, RAM and operating system. Your problem is that you see no more than 4 GB of RAM on your x 86 Server 2003 install? This is a limitation of the operating system - to use more RAM you need an operating system that can deal with the RAM.

  • If you install VMware Workstation on Windows Server 2003 standard x 86 edition then you will only be able to use the 4 GB of RAM, Windows Server 2003 Standard x 32 can process.

  • If you install VMware Workstation on Windows Server 2003 standard x 64 edition then you will be able to use the 32 GB of RAM that Windows Server 2003 Standard x 64 can process.

  • If you install VMware ESX, you can adjust your full 48GB of RAM and install multiple instances of Win 2003 Svr Standard, each of which can address 4 GB of your memory live available.

• Which laptop model can be installed in Windows Server 2003 and PIA?

  People,
  
  Hello. The PIA (Weblogic and Tuxedo and SQL Server) and the PeopleTools are compatible with Windows Server 2003 or 2008. But it is not compatible with Windows 7. Because my HP laptop is installed with Windows 7 and can not be installed on Windows Server 2003 or 2008, I need to buy another laptop to install Windows Server 2003 or 2008 PIA and PeopleTools.
  
  I need to know what model of laptop computer can be installed on Windows Server 2003/2008 and double boots several operating systems. Everyone installs Windows Server 2003/2008 and PIA in any laptop? Please tell me the model of the laptop.
  
  Thanks in advance.
  
  Lucy

  Any modern laptop with lots of RAM (> = 4 GB) and hard disk space, within capablities of 64-bit virtualization should be well.
  Even if you have Windows 7 OS to host, you can still install a virtual machine software installable on top of your operating system (for example, VMWare), then install an operating system supported as a virtual machine (called guest operating system). You will work on this virtual machine, exactly as it was a server, waiting for your host what OS is also running, no need to dual-boot.

  Nicolas.

• I just bought a Microsoft Surface Pro with Windows 8, and the cursor will not appear at certain points in time

  I recently bought the Microsoft Surface with Windows 8 Pro is installed, and sporadically the cursor disappears.  It doesn't matter if I use internet, Outlook or any other program.  Any ideas how to fix this?

  Clues in the present?

  The mouse cursor over where the Surface Pro and drift
  http://www.surfacetablethelp.com/2013/02/surface-Pro-mouse-cursor-unresponsive-and-drift.html

• Need space for the test environment for windows server 2003 and sharepoint 2010 online

  Hello

  We are currently running in the locked-down environment and looking for an online service that would allow us to put in place about 4 servers Hyper-V or VM (2003) and implementation of SharePoint 2010 and SQL Server 2008 on them... Where EV may seek to purchase/rent the space for it?

  Thank you very much for your time and your answers!

  Hi Volodymyr G.

  I suggest you to search rental / purchase of space on the server.