Satellite Pro NB10 limited wifi connection
I use Satellite NB10 Pro with version 1.20 of the BIOS and windows 64-bit of 8.1. I have trouble with several times the limited wifi connection. When I remove the driver and reinstall it, it works again. Pilot already updated, but keeps same problem. Tried several Satellite Pro NB10 same problem. Any suggestions?
For most of the WLan connectivity issues are related to the IP attribute the problems.
Usually the IP address is assigned automatically using DHCP service.
In case this question would appear once again, you can try to refresh the IP address.
Start the console (black DOS window) using the command: CMD (type CMD in search)
Then use the command: ipconfig / renew
If this question would never happen again, I recommend you to reset the WLan router.
I have a laptop Toshiba Satellite Pro NB10-A-100 and I want to enter the BIOS Setup and I can't.
What is the key combination to get?
Thanks in advance.
Perform a complete shutdown in Windows 8 - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
Restart your computer and try to use F2 or F12. If you use F12 there should be opportunity to enter the laptop configuration settings.
Please test and send feedback.
Please help me to solve this problem from my computer, that my hp Pavilion 15 p184ca is now limited WiFi connection after my window 8.1 for windows 10. hope you guys can help me and I know that many more hp customers are waiting for your response to my problem. Thanks in advance guys
Please install WIFI drivers and restart the device
computer new laptop will constantly limited wifi connectivity after a few minutes. He has done this since I first started the laptop.
Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook 13-s195nr and problems with wireless disconnection. In Device Manager, click network adapters. Find network adapters, your wireless network and on the right, click on it and then go to the power management tab and uncheck sur-autoriser computer to turn off this device to save power.
Here is a link for troubleshooting wireless connection, if you need.
Some say that this download will help fix this Microsoft Fix it.
Please let me know how it goes.
You can say thanks for trying to help by clicking on the Thumbs Up below!
My apologies if I get some of the jargon wrong, but I'm pretty useless when you want IT emits.
I have a Satellite Pro A200 and had problems connecting to various wifi connections.
The computer could see the wifi connection and connect to it, but I wasn't able to connect to the internet.
The question of the Office was arranged by our IT support guy (security settings on the new router we too complex for my PC or something like that), but he has not been able to solve the problem of not being able to connect to my iphone to use the 'hotspot' via the wifi function.
Someone there knows a way to solve this, or is it a simple fact of the laptop is too old and really need to update?
Thanks for any help that anyone is able to give.
> Someone know a way to fix this or is it a simple fact of the laptop is too old and really need to update?
This isn't a question of the age of the laptop
As far as I know not that support all mobile operators
You should first ask your mobile operator if you can use the tethering service.
If this would be supported in my mobile operator, then connect the iphone to the laptop first
So that you have two options: you can use the BT connection (in this case check if computer laptop also supports BT) or via a USB cable that came with the iPhone.
(PS: as far I know to attach is supported by iOS3.0 and higher)
After that the iphone was connected to the laptop, you must activate the tethering on iphone.
Under settings of-> network, you should see the option internet tethering it must be enabled.
Now you should be able to see that in the Network & Center sharing control panel.
can someone there help me please?
I have a Satellite Pro L300 and it does not connect to Wifi after hibernation.
The only way to do it is to restart the pc.
I m using a Satellite L300, which should be similar to yours and I peut t noticed this problem. WiFi works perfectly without any problems.
In any case, I would recommend updating the driver WLAN and the BIOS. The two you can find on the Toshiba site:
http://forums.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
In addition, you run the factory settings or you have installed a different version of Windows?
I just bought a laptop Satellite Pro C660-2JR for my daughter, the unit works fine on lan cable, but not connecting not wireless.
Wireless indicator shows an intense tone, but when I click on connect after that 10 seconds, it says connected failed.
The network settings are correct (I checked with two other computers that connect without problem), the pc is running x 64 win7. on the toshiba site there is no drivers listed for the local network, I downloaded and installed the drivers from realtek realtek Web site, but no difference.
Is this a problem with x 64?
I've tried the recovery disks
Can anyone help?
On this virtual path, it is not easy to say what the problem is, but there must be a problem with the WLAN settings I guess. What else? Your laptop can detect your router. Question is: what router do you have, what WLAN standard do you use, and you have WIFI password or not.
Have you tried to reboot your router and check again?
When you unlock your router you have the same problem?
I just buy a Satellite Pro A300 with Vista, but when he falls asleep or I close the lid, wake him up he cannot connect to the internet (Wi - Fi) until I reboot. I get an error message that I have "limited connectivity" to my wireless network. Can anyone help?
As a solution, I recommend updating the BIOS and then update the WLAN card driver.
I recently reinstalled Windows XP on my Satellite Pro M40, which eliminated all drivers for WIFI etc.
I tried write the drivers on the toshiba site on drive on this PC and then install on the other PC, but still have no connectivity...
Some unknown device is listed in Device Manager?
I'm not 100% sure but I think your M40 Atheros WLAN card inside. Please visit http://aps2.toshiba-tro.de/wlan/?page=downloads and try to download and install WXP driver Atheros WLAN Card.
I have a short model "Toshiba Satellite Pro L300-156" (PSLB1E).
The system state is:
I used the recovery CD (to install Windows XP and other software on this CD).
I've upgraded to the latest version of the BIOS (1.50, 10/07/2008) for my laptop and I downloaded all updates for Windows XP.
I installed the latest WLAN driver for my WIFI (Realtek RTL8187B) card.
The problem is still there:
Every 12 hours (exactly on the minute!) drops connections.
Not only the Internet, but the local connection.
It is even a kind of matrices.
Both a connection to a local computer and "mIRC" (ssh/telnet-program) to "PuTTY" (program-chat-IRC) says "network error caused abortion of software".
These ping connections not, they die instantly in a tenth of a second.
I guess it can be caused by a 3rd third party tool that was installed on your laptop.
I mean it of really strange that disconnected EXCATLY after 12 hours of use.
"I have goggled a bit for the message: network error: Software caused connection abort."
And found that this error is displayed if the Windows network code decides that your network connection is dead. This will happen when you remove the cable network Ethernet-connected computer, or if Windows has any other reason to believe the entire network has become unreachable.
I think you should check the settings of your WLan router. My router refresh / disconnects after 23,59 hours to ensure that the IP address has changed.
I have a Satellite Pro c660 and bought a copy of windows 64 bit with him - the laptop come with many software from toshiba on what I wanted really, I therefore installed windows 64 bit (fitness in the process).
After the Installation I had some problems connecting to my wireless home (he was missing drivers, but have now install) but finally got it works.
After having taken it round my friends last night, I could not connect to its wireless - the password has been good and I could see the network, but he just kept constantly defect - its network was on it, because his cell phone he was performing. -The only difference between its network and the spirit (that I can see), it's that she was using the TKIP encryption to connect, while I was using AES (my network card is Atheros). -Even when I tried to configure a network profile and have it automatically connect (using the same information she used, including the TKIP encryption) - it was always not.
The ideas people? More missing drivers?
PS - I really don't want all that toshiba nanny software on the laptop.
Thanks in advance!
> Any ideas people? More missing drivers?
If you can see the Wlan network then it means that the WiFi adapter driver is correctly installed and the problem is between the router configuration problems WiFi and wireless network card.
Are you abele to connect to other networks wireless at home?
Please disable encryption settings in the Wlan router and try to connect to the Wlan that is unprotected.
But note; This must be done only for testing purposes!
You should also check if the MAC address filtering is disabled in the settings of the router.
My Satellite Pro L300D loses the wifi connection at random times and I have to turn off the network for the L300D BT box to connect again. Throughout this, my other laptop Toshiba works fine on the network, as does my PC, so the network is fine.
It's incredibly frustrating because I have a new baby and get NO SLEEP - I just need the L300D blasted to work!
Any help would be good and would save me lose any more hair.
one of the two: or the Ruter have electrical problems, but you said that another computer is not working properly, so it must be a physical problem with the unit your problematic computer wireless, if wireless is the drop of water at all times, you must check this problem with a service provider.
If you don't know where you can find one, visit this Web page to locate your nearest Prov. Serv.
I hope this helps.
/ * HEAVY METALL. \
Even though my work laptop has a switch (power) wireless and DIRECTED on the side (under the floppy drive), it does seem to pick up a wireless connection, or have wireless options on the corresponding section of the control panel.
Is it a hardware problem (that is to say he is ready wireless, but has not installed) or a Windows problem?
The WiFi card is optional on the Satellite Pro 2100.
In this case, it is possible that your device has all switches but no card WLan.
I recommend you to check the Device Manager. There you should find the WiFi card network card is installed.
Newbie on your site so thank you in advance for your answers ;-)
Picked up a Toshiba Satellite Pro A40, completely formatted and installed a legal XP Pro.
Trying to connect to the internet using a Netgear wg511 card works on my other laptop, it will not connect even though I installed the driver for it?
It comes up with 'limited or no connectivity problem occurred because the network has not assigned a network address of the computer.
Any ideas please?
First of all, you must update the WLan driver.
I put t know what wireless network card has been installed, but you can find WLan card details in Device Manager-> network adapters.
In addition, I recommend to disable all the security settings on the router and then try to connect to the wireless network.
If you will be able to connect to the Wlan, you can enable security settings (Wlan encryption, mac address filtering, firewall, etc.) again.
Last but not least, you can try to use this command in a DOS (CMD)
Ipconfig / renew
Salvation in the Forum.
I have problems with a satellite Pro M70, about gaining control of wireless connections.
When I scan with "The Radar" I have ConfigFree for available wireless accesspoints, I get several points available, but it is not able to connect to one of them. I can read their status and see their marker of WEP encryption.
When I try to connect to one of them, I get a pop-up dialog, that said (translated from Danish) 'suppliers another software is in control of the wireless network card. When you try to configure a connection through the classic way to windows, windows States that "windows is not able to configure this wireless connection - if you have another program to manage wireless connections, you must use it". I guess it refers to ConfigFree...?
Is the unnamed "other provider" associated Windows or perhaps associated McAfee (Security Suite 2007)?
If you are familiar with this problem or something like that I'd be please to know.
Also - where can I enter keys for WEP encryption for my friends in ConfigFree WLAN routers?
> Trying to make a connection through the classic way to windows, windows States that "windows is not able to configure this wireless connection - if you have another program to manage wireless connections, you must use it". I guess it refers to ConfigFree...?
It should not be a ConfigFree. According to you, an Intel ProSet utility or a Client Atheros wireless network adapter might be controls the Wlan configuration!
Please check if one of the two control the WiFi network tools and turn off!
> where can I enter keys for WEP encryption for my friends in ConfigFree WLAN routers
You should have three different tabs in the utility Configfree.
The second device settings provides the list of devices, and you should see the wireless network connection.
Choose and use the button network connections.
There you should find some encryption settings!
Also check the profile settings tab and the option called security settings
Maybe you are looking for
I want to print directly from my desktop Windows 7 (64 bit) on a network of HP printer WITHOUT the USE of an OTHER COMPUTER. I looked in the Web Jetadmin product, but from the technical description, I understand that print using Web Jetadmin on Windo
I need some advice of what can be done with my problem. I bought a new laptop Toshiba model as in the subject, and the laptop is no longer. I went to the service provider authorized to claim my warranty. The people there took my laptop and after two
You can provide a link to the motherboard for a (HP Pavilion 21-h116) sheet. Thank you
I got a G575, and I am now deciding to buy an iPad. However, my mother would use my G575. However, the cover is covered in stickers and the WASD keys on my keyboard are slightly less resistant than others. Is it possible to get these parts? A compute
1 all sorry for my English. I have files with data. In this array of strings, I have 2 columns with date and time. I want to show these data to the XY Chart with time and date on some of the DBL and X on Y. I tried to do it by myself, but cannot add