"Microsoft Update" critical updates will not be installed.

Similar Questions

• Microsoft Update will not install error 0 x 643 net Framework 1.1 service pack 1

  error 0 x 643 microsoft net franwork 1.1 service pack 1 is not installed

  See: When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0, or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install '1603'

  If always, the update will not be installed after passing by all the methods shown, contact MS as described at the beginning of the article:

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  MowGreen MVP Data Center Management - update of safety Consumer Services

• For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported

  For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported. Fix - it crashes too much with the line "invalid command line" when I try to run it.

  Hello

  1. this problem occurs only with this particular update?

  2 did you change on your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can reset the Windows Update components.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 2

  You can read the article.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 3

  Step 1:

  Place the computer in a clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. click Startand then click run.

  b. type msconfigand click OK.
  The System Configuration utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and servicesand then click OK.

  When you are prompted, click restart to restart the computer.

  
  Step 2:

  Download and install the update from the link.

  Update security for Windows XP (KB2719985)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30282

  See also:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

• Security update will not be installed. Patch KB2604092

  KB2604092 update will not be installed. Automatic updates constantly bring this patch even after download. How can I disable this "appear"?

  Hello

  (1) is limited only to this particular update?

  Please check the update history if the update is installed, otherwise check the error message and provide us the same.

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  If the update is installed successfully, you can check the link below:

  http://support.Microsoft.com/kb/910339

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Note: Note: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  If the update is not installed you may read the following article and check.

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

  I hope this helps.

• Security update will not be installed.

  I'll have to update and install my automatic updates as a security update will not be installed. All I get is "Security Update for Windows XP Media Center Edition 2005 Update Rollup 2 X 86 Edition (KB2628259)" not installed. Anyone has a solution, please?

  Ian

  Ian

  I don't know the answer. It follows a quote from KB2628259.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For more information about how to contact your local Microsoft subsidiary for support questions with security updates, visit the Microsoft International support Web site:

  http://support.Microsoft.com/common/international.aspx?rdpath=4 (http://support.microsoft.com/common/international.aspx?rdpath=4)

  North American customers can also obtain instant access to unlimited free support by email or unlimited individual chat by visiting the following Microsoft Web site:

  http://support.Microsoft.com/OAS/default.aspx?&PRID=7552

• For Windows Vista (KB2419640) security update will not be installed keep getting CODE of ERROR 8E5E0147. Operating system MS Windows Vista Home Basic 32-bit SP2

  For Windows Vista (KB2419640) security update will not be installed keep getting CODE of ERROR 8E5E0147. MS Windows Vista Home Basic 32-bit SP2 operating system.

  Help, please

  Thank you

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Microsoft Update will not work

  Microsoft Update will not run through Internet Explorer.

  I seem to encounter two different errors and there seems to be no trend about which error appears where or when or why.

  One is 0x800A138F: the site has encountered a problem and cannot display the page you are trying to view.

  I don't remember exactly what it was or said, but it was similar.

  I tried the solutions so far:

  -restart the computer, internet, etc.

  -added the Windows Update and Microsoft Update for Trusted Sites (I did years ago)

  -reset of Trusted Sites as the Internet zone settings

  -connected Microsoft Fix - It here: http://support.microsoft.com/mats/windows_update/en-us

  -a attempted to run the windowsupdate.diagcab from here: http://support.microsoft.com/gp/windows-update-issues?wa=wsignin1.0

  As with many other users of this forum, I can't run this .diagcab file. Looking at the many messages on this file, no one has yet solved anything. It seems that Microsoft has yet to recognize or acknowledge that they're providing a tool that is unusable. I hope I've provided enough information to lead to a resolution. I also sent a report through the Fix - It tool when it has not changed anything.

  Hello

  Please go to the Microsoft Community Forums.
   
  You did changes to the computer before the show?
   
  I suggest to refer to the links and follow the steps in the articles:
  Error message when you search for updates on the Windows Update site: "0X800A138F: there are no updates available at this time."
  http://support.Microsoft.com/kb/326253
  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
  Note: You should not turn off Windows Firewall unless you have another firewall enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
   
  I hope this helps.

• Unable to use wireless internet. In addition, my windows update will not be installed.

  Original title: extended error code = Oxfof4

  I have a couple of different symptoms. My laptop acts like it doesn't even have wireless capabilities although the exact model the same sitting next to her was a strong wireless signal (I still had internet capability on this laptop also). In addition, my windows update will not be installed.  I checked "Event Viewer" in system tools and have all sorts of errors. Error service Control Manager, "Warning b57w2k", code error Windows Update Agent and more. Still, the laptop doesn't move and accesses files, but no internet. I scanned with AVG and Malwarebytes 0 infection. Uugh!  Any suggestions?

  Many laptops have a switch that turns on or off the wireless radio.  This can be a physical switch somewhere on the laptop or a combination of the Fn key and one of the F keys.  Read the user manual for the laptop for more details.

  The warning includes "b57w2k" seems to be linked to a Broadcom NetXtreme 57xx Gigabit Controller (not wireless, wired).  You can click the copy (just below the up/down arrows) on the property sheet for the event and paste the content in your next post here.

  In general, the report that you have 'all kinds of errors' in Event Viewer is not very useful.  We do not understand what you're watching.

• Install a microsoft update WILL NOT

  For two weeks I was faced with an update from microsoft that will not be installed. That's my faithful old XP.

  The small yellow shield indicating that an update, KB2656353 to be more precise could not be installed...

  only this one, I get used to the shield warning... !! The answer came to me through

  PC'ers useful, but it says that I have to find, uninstall and then reinstall the three services packs and then, and

  only then this update will have. I don't know is what a service pack or where to find a. I do enough

  good on computer maybe I severe dyslexia and her take my 45 minuets just for this deal.

  I guess I'll have to find a service online, I hope, or a professional come to my house to fix my old

  young girl... ! I'm home bound as well and my computer is a salvation for me in many ways. I can't wait that my

  particular problem is rocket science so difficult to repair. I was hoping a link or something can handle.

  Lady... !!

  Duplicate of http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/security-update-for-microsoftnet-framwork11sp1/c052b893-3ed2-4f63-a5f8-60b5efac5da2 (March 3, 2012)

  And http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/a-windows-update-wont-install/a4ced591-c173-451f-bff7-452cd033ed21 (March 2, 2012)

• Safety Office KB2509461 number update will not be installed. Any suggestions?

  Custody of Microsoft Update tries to install the security update KB2509461 number, but it will not be installed. I disabled my antivirus and antispyware, firewall. Any suggestios?

  You have Microsoft Office on your computer?

  I had the same problem of automatic updates now download and install this exact update and fails every time.  I think that the reason why it's a failure, it's that I have Microsoft Office on my computer, so it cannot update what either.

  I'm not quite sure how to do stop.

• automatic security patches/updates will not be installed

  I have several updates automatic safety that will not be installed.  I tried to intall them separately and even disabled my firewall, but they won't install always.  I'm having problems to open my mail in Hotmail as well and have tried all of the fixes suggested in the success of wihout forums. These two problems may be related?  I have installed Mcafee and it's date-said I have no viruses.  Can anyone help?

  Hello

  · What are the security updates that you are trying to install?

  · What is the error message or error code you receive when you try to install the updates, and also when you try to open a mail?

  · Do you remember all the recent changes on the computer before the show?

  The question doesn't seem to be intertwined.

  Search for the installation error code that your computer has saved when the Windows update installation failed. To do this, follow these steps:

  a. Click Start, click all programs and then click Windows Update or Microsoft Update.

  b. on the Windows Update Web site or on the Microsoft Update Web site, click on view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  (c) in the status column of this window, find the failed to install update and then click on the red X.

  (d) a new window opens that displays the installation error code.

  You can check the link below: how to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation: http://support.microsoft.com/kb/906602

  For the problem with windows Live, I suggest you to post your query with the required information in the Windows Live forum. Please visit the link below to find a community that will provide the support you want. http://windowslivehelp.com/

• kb2539636 security update will not download/install automatically

  Download Vista security
  I have a laptop with vista family premium, sp2, 32-bit windows. I need to download kb2539636 security update. It will not download/install automatically. The MS website shows three different files for this download. They are: a 64 x, an IAH64x, an x 86. Since I was a 32-bit system, no sounds just. Which one should I download?

  Hi Ranchman,

  x 86 is commonly used instead of 32-bit (and no, I don't know why)-if it's one you need for a 32-bit system.  I looked up the update here: http://support.microsoft.com/kb/2539636.  Then I went to http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=27017 and I think that what you want is NDP40-KB2539636 - x 86 .exe.

  I hope this helps.

  Good luck.

• K82833941 security update will not be installed. What should I do to install it?

  Received a notice to update windows and all updates but K82833941 updated. I tried several times to update, but receive a notice that it could not be installed.

  Uninstall the .NET Framework 1.1. Then download the .NET Framework Cleanup Tool
  In the drop-down list box, select 1.1 and clean.
  Reinstall .NET Framework 1.1
  Download and install. NET Framework 1.1 Service Pack 1
  Visit Windows Update or Microsoft Update and let it install the rest of the 1.1 updates, including KB2833941.

  Check if it is installed and report.

• I just bought a used with xp on it computer, after that getting hook up to the net microsoft update will not work.

  He said that what ep is running on another computer or block by microsoft. How can I resovled this.thanks andrew

  Hi ford30705,

  1. What is the full error message that you receive?

  2 are you able to access all other websites properly on the computer?

  Windows Update will not work if the copy of Windows XP is not enabled on the computer.

  Type the command at the command prompt to find out the status of activation on computers below.

  oobe/msoobe /a

• Update Windows on Windows 7 remains at 0%. Updates will not be installed.

  Windows 7 update does not install updates.  It is said there are 35 updates installed.  The Update window remains at 0% for hours.  I tried to FixIt - no result.  I checked, that is to say, that everything is as it should be.  This computer is a system that adjusts only once a month.  Should I do a clean boot?  I really don't want to reinstall Windows 7.  Any help would be appreciated.

  You receive errors related to updates?

  1. Open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. In the left pane, click view update history.
  3. Find an update for Windows that has failed to install, and then double-click the update to view more information.
     Updates that have failed to install will display failed under status, next to the name of update.
  4. In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.

  Follow the links in the Windows Update dialog box under more information or help and Support to resolve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  If your computer is experiencing problems find and install updates of the operating system, try using the troubleshooting Windows Update tool to solve the problem. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services run properly

  Windows update General troubleshooting

  Suggestions:

  Make sure that the following services are started.

  1. Click Start, type services.msc, press on enter, and then click Services.

  Double-click on these "Windows Update Service", "Cryptographic Service" and Background Intelligent Transfer Service"and under the general tab, verify that the service has not been disabled in the Startup Type box. If the Service has been disabled, then set to automatic.

  1. Perform a clean boot to start Windows using a minimal set of drivers and startup programs. A clean boot helps eliminate software conflicts. Then try to install the update from the download file that the problem may occur because of a conflict of third party software.

  The following link has steps showing how to perform the clean boot:
  http://support.Microsoft.com/kb/929135

  The purpose of a clean boot is trying to find out what service/program is causing a problem.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  Important - step 7: reset the computer to start as usual

  1. Download the update and install the update manually
     http://www.Microsoft.com/downloads/en/default.aspx

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.