Microsoft Windows 2008 R2 failover clusters

Similar Questions

• Microsoft Windows 2008 r2 cluster on Vsphere 5.0 u1

  Hello

  Can we configure the Windows 2008 r2 cluster in two different ESX clsuters, is - it possible?

  Kind regards

  Surya

  Yes... cluster in the box works very well... only thing needed to deal...

  -Scsi bus sharing must be phyical...

  -rdm must me mapped on vm with the same scsi id.

  -all rdm LUN must be shared by host esx...

• Siebel 8.1.1.11 on Windows 2008 32-bit

  Dear all,

  We intend to improve 8.1.1.5 8.1.1.11 and currently on Windows 2008 32-bit.

  Siebel 8.1.1.11 will work on Windows 2008 32-bit for HER, SWSE, etc.?

  The "Certifications" tab does not have Microsoft Windows 2008 32 bit as an operating system supported. This means that we cannot spend our 8.1.1.5 existing on Windows 2008 32-bit to 8.1.1.11 unless we move to Windows 2008 64-bit?

  But "Siebel Support for Windows 2008 () ". DOC ID 781428.1 "( )" indicates that Windows 2008 32-bit is supported for 8.1.1 or.

  Thank you

  Lino

  Hello Lino,

  Thank you for using Oracle communities.

  Regarding your query on 8.1.1.11 with Windows 2008 32 bit. You can always 8.1 patch1.11 atop 8.1.1.5 and application will work fine.

  Problem here is that Windows 2008 (32-bit) is end of life (EOL) of microsoft. So Siebel will always work for Siebel 8.1.1.10 and 8.1.1.11 (including Patchsets) Siebel and Oracle supported on a technical level, but we don't plan to list the versions of Windows on My Oracle Support certify once can no longer get support from Microsoft.

  Visitors can run Siebel 8.1.1.x on Windows 2008, 32-bit, but we dealt only with issues related to the Siebel code and can not help in Microsoft problems, since we are unable to get help.

  So since you are running on W2008 32-bit 8.1.1.x pre-8.1.1.11 version then you might well spend Siebel to 8.1.1.11 and stay on the subject.  (As it was in the old SRSP will who honor us)

  But of course, you will need to plan to move forward on W2008 R2 version.  This version is ONLY for 64-bit as matrices a with R1 W2008 32-bit line.

  Note: there is a hard stop on the end of this year with the Innovation Pack 2014 (aka Siebel 8.1.1.14): as we will be upgrading all the compilers and relying on Win 2008 R2, we can support 64 bit OS only at this time (because 32-bit OS will not exist for this and future patches). However, the Siebel application will be a 32-bit application.

  I hope it helps.

  Best regards

  Chetan

• Hyperion works with Windows 2008 R2?

  I want to install software Hyperion on 64-bit of windows 2008 R2, installation is ok, but what configuration occurs. I want to know: is Windows 2008 R2 is fully supported by Hyperion.

  Hello

  From 11.1.1.3 version that he didn't is not supported, this will to 11.1.2 and 11.1.1.4.
  Good read on my oracle support (Hyperion taken 11.1.1.2 supported on Windows Server 2008 [860132.1 ID] or what products v11.1.x Hyperion Enterprise Performance Management (EPM) on Microsoft Windows 2008 will be supported? [REF 981551.1])

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Creating a failover cluster Windows 2008 on ESX 3.5

  Hello

  I would like to create a cluster Windows 2008 on ESX 3.5.  As I understand it browse the forums supporting parallel SCSI as a type of shared bus was abandoned for Failover Clustering in Windows Server 2008.  To enable clustering, you need to use iSCSI on a target server.  Additional costs of license option for the introduction of a target server.

  Is ESX 3.5 update to support Windows 2008 failover clustering?  If so, when?

  Is there another solution that involves no additional cost?  I watched StarWind but the free version does not give us enough resources that is necessary.

  How ESX 4.0 supports Windows 2008 failover cluster?

  Thank you

  Brian

  In ESX 3.5, you can do a 2008 failover cluster with a software initiator in the node Windows 2008.

  For ESX 4 no problem.

  See also: cluster in a VMware environment software

  André

• We license from microsoft windows server 2012 and I want to install Windows server 2008. Is this possible?

  Hello

  If we have the license microsoft windows server 2012 and I want to install Windows server 2008.

  Is this possible?

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• microsoft study guides in 2008 will work with windows 2008 r2 admin review

  I want Server Windows 2008 r2 review. Microsoft has what looks like a great learning/exam prep guide)
  MCITP Windows Server 2008 Server Administrator Core Requirements: Self Paced Training exams 70-640, 70-642, 70-646 Kit
  My concern is that this guide was conducted in 2008 I read in places that the material is not uptodate with exams. Any suggestions?

  Hello

  You can check this link. Alternatively, you can browse the Windows Server Forums for more information.

  I hope this helps.

• Can I use ASM / ME to windows server 2012 file server failover clustering?

  Hi all

  Can I use ASM / ME to windows server 2012 file server failover clustering?

  We can use it with exchange, sql, sharepoint,..., but I can't find any document for file server.

  Thank you.

  HIT / working ME with CSV W2K12/R2, W2K8 CSV volumes cannot bear not to cancel the MAPPING is the main difference.  But HITTING / will allow ME to create the active copies and replicas of volumes CSV

  Yes the cluster file shares are supported with SUCCESS / me.    If you think about it, SQL, Exchange are indeed a "sharing".   Because it is an NTFS volume with services that run against her.  SQL, Exchange or fileshare services.

• Microsoft Failover Clustering - issue of persistent reservations

  Hello

  I am trying to set up a fresh Win 2008 R2 failover cluster on my 5.0 ESXi hosts and unfortunately the verification of the cluster fails with an isssue of persistent reservation.

  I follow all the kb articles and white papers correctly build 2 VM of the client as follows:

  Windows 2008 R2 Enterprise SP1

  NIC for public traffic

  NETWORK map for the private heartbeat traffic

  Disk EagorThickZero for system

  RDM added in physical compatibility mode

  Controller SCSI (1:0) used in physical mode for both nodes

  Storage matrix that I use is a 5300 VNX

  I have Powerpath 5.7 running on each host ESXi

  Does anyone have an idea where this problem?

  I have attached the below error message.

  

  Hello

  The two guests are running on the same host? Have you tried posting when they are running on different hosts?

• Cannot import Microsoft Windows Server 2008 R2 with Hyper-V virtual machines to VMware ESXi 4.

  Hi team,

  I use VMware vCenter Converter Standalone to import certain Microsoft Windows Server 2008 R2 with Hyper-V virtual machines to VMware ESXi 4, using another Windows Server 2008 R2 as the machine Agent Converter. Well, the agent connects to the Windows VM source very well (I used the net use command to create a line of conduct...), perhaps no chance to connect to the computer target VMware ESxi 4 and make the converter doesn't work...

  Following is the error message:

  "Unable to connect to the host specified" from the converter agent machine. " It is perhaps because the host is not available on the network, there is a problem with the network configuration or management on this host services do not react. Check all components of converter to be able to connect.

  So, my question is; is it possible to create a work around (like the net use Windows command above) to make possible the connection of the converter Agent on Linux VMware ESXi 4 machine Windows machine, to directly import the virtual machines of Windows Hyper-V to Linux VMware?

  Thanks in advance,

  It's even easier than that

  Use this: http://www.winimage.com/

  Which will convert *.vhd *.vmdk, so you don't need to do all this... Of course, another way is to start the machines, leaving them on Hyper-V and go through the network and process virtual machine as physical machines and do a P2V on the network...

• E-business Suite Release 12 certified with Microsoft Windows Server 2008 R2

  News :)
  
  now R12 certified with Microsoft Windows Server 2008 R2 x 64 bit.
  
  You can find more details here...
  
  http://blogs.Oracle.com/stevenChan/2011/01/ebs12_win2008_r2.html

  user13767670 wrote:
  is this means that we can directly install the EBS 12.1.X on the Microsoft Windows Server 2008 R2. ?

  I do not. As mentioned in the blog...

  Oracle E-Business Suite Release 12 (12.1.1 or later) is now certified by Microsoft Windows x 64 (64-bit) on the levels of the application and the database through a certified migration of an existing installation of version 12.

  Thank you
  Hussein

• Replication Failover clustering & Hyper-v on a two-node cluster

  Hello

  We have two identical servers.  One to use as a main server, which houses two virtual machines.  The other should be used as a back up in case the main server is not somehow.  We planned on using a solution of third-party software to back up our virtual machines and launch them in the event of failure of the principal server.  However, we discovered just gave the failover clustering in Windows Server R2 2012.

  We have tried to set up a cluster 2 nodes, with our virtual machines properly replicated to the backup server.  Excited by the present, we tried then to simulate failure of the primary server (by pulling on the cable network).  We were a little disappointed to find that the backup server is not automatically run virtual machines.  We did a survey and read than a solution of two nodes requires storage space for additional network (in addition to our two servers).

  I wonder if that's okay?  In other words, a two-node failover cluster requires separate network storage space.  If this is not correct, can someone point me to a set of instructions to correctly configure a two-node failover cluster that will automatically launch the virtual machines on the server backup (in the case of a failure of the principal server).

  Thank you

  Mike Goldweber

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Cannot install 3 WMF on Windows 2008 SP2 computer

  I have a system running Windows 2008 SP2 Enterprise edition OS. I try to install windows management framework 3 so I can get running powershell 3.0 on it and unable to do so. When I run the installation of 3 WMF, I get a message "the update does not apply to your system". On the WMF page, it lists this version 3 can be installed on windows 2008 SP2.

  The system has .NET 1.1, installed 3.5 SP1 and 4.5.2. I don't see WMF in the Windows Update list on the server. Suggestions that more I need to install or uninstall?

  Thank you.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows 2008 server v2

  Hi all

  Can you help me with this? a windows logon has been deployed on my windows 2008 Server v2. and when I tried to log on to the server as admin, I get a message 'security policies on this computer are set to display information about the last interactive logon. Windows could not retrieve this information. Please contact your network administrator for assistance. Now, I can't log on to the server and everything I tried but to no avail. I can only log on locally as administrator on a client system if the virtual machine is stopped.

  Anyone can help the possible solution?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Update MBAM 2.0 to 2.5 on Windows 2008 R2 MBAM

  Hello.

  I hope someone out there can help you, we have recently tried to upgrade an instance of MBAM version 2.0 to version 2.5 and have received the following message is displayed:

  "This version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program. »

  The upgrade was performed on an instance of Windows 2008 R2 64 bit and we are work struggling on why this product could not recognize the operating system? Especially given that all the prerequisites were followed to ensure that we could run the upgrade.

  Thanks in advance,

  Tim

  Wrong forums. Message here:

  TechNet - Windows Server - Microsoft forums