Mid-2015 iMac restart in Windows Installer 10

Similar Questions

• Installation of Boot Camp utility stopped working after that Win 10 Pro was made.  Installer got stuck on step 'realtek' audio  I restarted Windows, but Boot Camp does not resume or restart the Windows installation process-side utilities?

  How can I get the Boot Camp utility to install entirely in Win 10 Pro?  After winning 10 Pro was finished installing, the installation of Boot Camp process began but eventually got stuck at halfway through (for 20 minutes) on stage 'Realtek Audio.   A restart of Windows has not triggered a recovery or re-starting installation of the Boot Camp utility.  Windows, it works, but I have no utilities 'Boot Camp' and can not find any Boot Camp file stored on the side of Windows again.

  Please see Bootcamp 6.0 driver install interrupted for resolution.

• El Capitan 10 BootCamp Windows does not restart in windows install

  MacBook pro (mid-2015) 15 "i7 2.5 16 GB of ram running OS X El Capitan 10.11.4

  After installing windows (download from Microsoft) 10 per boot camp, he didn't restart windows install, just run OS X, BOOTCAMP partition exists, but it's just blank, even trying to hold 'control' even if there is no drive restart it to another macintosh

  and here's the output for "diskutil list" Terminal and "diskutil list sc.

  Perform the following two procedures and restart your Windows installation.

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

• Windows Installer does not.

  How can I fix the problem of having my Windows Installer not installed correctly?

  Hi Thomas,

  Thanks for posting your question in the community of Microsoft Windows. I understand that you are facing problems with Windows Installer. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this problem.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. What is the error message that is accurate or complete?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  3. when exactly you receive the error message?

  4. do you have problems in installing or uninstalling any software application?

  Please follow the steps below and check if that helps.

  Method 1:

  Unregister and register again the installer of Windows:

  (a) click Start, click run, type MSIEXEC /Unregister. and then click OK. Even if you do it right, it may seem that nothing is happening.

  (b) click Start, click run, type MSIEXEC/REGSERVER, and then click OK. Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass. After you run this command, the operation is complete.

  Method 2:

  Restart the Windows Installer service:

  a. click Start, click run, type services.msc and press on Enter.

  b. right-click on Windows Installer and click restart (if reboot option is not highlighted, click on Start).

  For reference:

  Error "Windows Installer service could not be accessed" occurs when you try to add or remove a program in Windows XP or Windows Server 2003:

  http://support.Microsoft.com/kb/315346#Method2

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Windows Installer 4.5 installed it on Windows Vista

  Original title: defective Installer

  Ultimate home, update 2, 64-bit Vista. Have a defective installation program and install download of 4.5. Said there is not enough storage, but there are 129 available concerts.

  Hi rdr2345,

  1. are you referring to Windows Installer?

  2. Why do you want to install Windows install 4.5?

  3. What is the complete error message you receive?

  4. where did you downloaded version of Windows install 4.5?

  You do not have to install Windows install 4.5 version if you have Windows vista service pack 2 installed on the computer.

  If you still want to install it, then I suggest that you restart the Windows Installer on the computer and check if it works.

  (a) click Start, click run, type services.msc in the Open text box, and then click OK.

  (b) in the list of Services (Local) , right-click on Windows Installerand then click restart.

  Windows install 4.5 Redistributable

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• iMac 2015 Unable to Boot Camp and Windows Installer

  I've been back and forth with a Service guy to customers by phone, but thought I'd throw so the question in the case to see if there were others who have experienced similar problems and might be able to help.

  I have an iMac, retina 5K, 27 - in, end of 2014. It allows to launch the Boot Camp with Windows 8.1, which I put in place about 1 year ago. It worked very well. But then, I decided to try to upgrade to Windows 10 about 3 weeks, which is not well. Decided to erase the partition via the wizard Boot Camp and re - install from scratch.

  Now, I can not install Windows at all. I've tried everything. Using another ISO downloaded from the Windows website. Check disks using first aid. Last night I even totally erased the readers (via the terminal in recovery mode, with the help of the man of CS) and made a "Reinstall internet" of the operating system and then tried in boot camp. Without success.

  I tried to call Microsoft too, but their position on the whole thing is "this is on a Mac, this is the problem to Apple. Bye. »

  Appearances, Assistant Boot Camp is successfully created a partition. The system resets the Windows installation each time and I spend the flow rate of the installation until I get to the section "where you want to install Windows? I select my Bootcamp partition, format and then click Next. That's when I get the error message "we could not create a new partition or locate an existing one. For more information, see the Setup logs files. »

  If I quit the installer and restart on the side OSX, I see that the new partitions is to Windows NTFS, so it seems ok. I am completely puzzled and frustrated as * at this stage.

  Any thoughts? Ideas? Help? Please?

  Data sheet:

  iMac (retina 5K, 27 inches, end of 2014)

  4 GHz of Intel Core i7 processor

  16GB 1600 MHz DDR3 memory

  AMD Radeon R9M295X graphics 4096 MB

  What are the external devices connected to the iMac during the installation of Windows?

  See also Boot Camp: "we could not create a new partition or locate one" alert during the installation of Windows 8 - Apple Support .

• I have iMac 5 k mid 2015 upgrading memory

  How to upgrade memory on iMac 5 k mid 2015 10.11.3 el capitan bones of 27 inches

  Installation video are visible by clicking on

  http://eShop.MacSales.com/installvideos/iMac-27-inch-5K-late-2015-memory/

• iMac (retina 5K, 27 inches, end of 2015) randomly restarts without errors

  My iMac has been randomly restart itself (about once per day) when it is idle.  Everyone knows the same problem?  I found a YouTube video and that's exactly what happened to my iMac: https://www.youtube.com/watch?v=ka7lUIeiH5E

  I attended once - the computer was in (not sleeping) with the screen off, nothing CPU/GPU intensive market.  I suddenly heard a chime and saw that the computer restarted itself.  I logged.  There is no window pop up.  I launched the Console and did not see anything unusual before the reboot.

  More information:

  1. The computer is idle when restart occurs.  Nothing on the computer indicates overheating.  Display is off (for inactivity) and fan is quiet.
  2. There is no trace of the software stop, panic the kernel or crash.  System log shows the normal activities, and then a sudden entry BOOT_TIME, as if someone pulls the power cord.
  3. It is not a failure, because the computer must be turned off if this is really a power failure.  "Start automatically after a power failure" is not checked.
  4. It started happening after I came back from a trip and upgraded my iMac to the latest Mac OS X five days ago.  This computer was purchased in October and I had never seen anything like this until a few days ago.

  Comments on the YouTube video suggests a total prosthesis, but I hesitate to do so if it turns out to be a software/firmware problem that can be fixed. -The computer is heavy and the closest Apple Store is not very close, not to mention the efforts of backup/restore.

  Thank you

  Seems to be a problem with 10.11.4. No doubt you did not have this problem before installing 10.11.4

  Further discussion on this issue here: 5 k iMac restarts on its own after you install 10.11.4 unexpected restart

  I think it is highly unlikely that it is material, as all signs point to a software problem (no problems before the update to 10.11.4 and everyone does the same behavior (unexpected random reboots) and the error code ('previous stop cause - 128' - which nobody seems to know what that means exactly) after updating to 10.11.4.) In any event, hardware problems usually come right out go the box or after tinker you with the machine somehow like the installation of ram, add devices, etc. and later, you start to experience unexpected behavior. None of this seems to happen with this issue.

• How to install windows 7 on a mid-2015 rMBP?

  Hello! I have a problem, try to install Windows 7 Pro x 64 via Boot Camp on a mid-2015 rMBP. The laptop came with El Capitan preinstalled that BCA 6.0.1 who does not choose any OS prior to version 8 of Windows. And I really need a Windows 7 for reasons of the software company. Is it possible to persuade the laptop to accept Windows 7 without invoking Voodoo weird software? Certainly, I scoured the forums before posting here, but has not found a solution to my problem.

  Thanks in advance,

  Andy

  If you really need W7 on this particular model, it requires a little bit of Voodoo if Bootcamp is a must. The simplest solution is to use virtualization, and create a virtual of W7 machine.

• How can I stop my computer restart during the installation of Windows updates?

  My laptop Dell Inspiron 1501 problems of marketing, past the login screen. However once I managed to get it on it works fine.
  I get messages saying my computer needs to reboot to install updates - but I'm afraid that I won't be able to restart once it has been automatically disabled.
  These updates sometimes, in the middle of the night when I am not able to postpone updates - how can I activate the restart automatic offf?

  In addition to Robear comments-

  HOW to: Configure and use automatic updates in Windows XP
  http://support.Microsoft.com/kb/306525

  Using Windows Update in Vista
  http://www.Microsoft.com/Windows/downloads/windowsupdate/learn/windowsvista.mspx

  Change how Windows installs or notifies you of updates:
  http://Windows.Microsoft.com/en-us/Windows7/change-how-Windows-installs-or-notifies-you-about-updates 
  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  If you want more control, set the parameters of AU to your needs, for example, might be for you not to tell that. TaurArian [MVP] 2005-2010 - Update Services

• Windows installation encountered an unexpected error. Check that the installation sources are accessible and restart the installation. "The error code is:"0xE0000 100. "

  My antivirus and windows firewall was also automatically disabled and I was not able tun back on

  So, I tried to reinstall the windows operating system 7, but when I try to install, I get an error saying:

  Windows installation encountered an unexpected error. Check that the installation sources are accessible and restart the installation. »

  The error code is: "0xE0000 100."

  I think that some virus or malware is rampant in my installation of windows system. So, I want to know there is a way to solve this problem...

  Ideas or suggestions that anyone has would be greatly appreciated!

  Thank you!

  See if this post has resolved your problem: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/error-code-oxe000100-windows-installation/aea498e2-09c3-43aa-bfa5-c06e68b1ea0c

  J W Stuart: http://www.pagestart.com

• Windows installation was not successful. Your previous version of Windows is being restored. Do not restart your computer during this time.

  Windows installation was not successful. Your previous version of Windows is being restored. Do not restart your computer during this time.     I have a small Toshiba laptop which has installed Windows 7.  I uninstalled my Norton (that I was instructed to do so by a friend); tried to reinstall Windows 8; and got the same message.  Any suggestions?

  Hi Dreah117,

  Thanks for choosing Windows 8!

  I understand that you get this error trying to upgrade to Windows 8. Its good that
  you have removed your anti-virus software are there is a possiblity of it
  causing problems with installation

  I have a few questions about your system

  1. what operating system (OS) you upgrade?
  2 what is a 32 or 64 bit OS?
  3. you try to install a 32-bit or 64-bit of Windows 8?

  You can try these methods to see if it solves the problem

  Method 1:
  Run the upgrade wizard and check to see if your system is compliant with the minimum requuirements.

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  Method 2:
  Disable or uninstall a software such as CD/DVD burning utility or third-party disk utility to defragment programs such as perfect disk / Daemon Tools

  (a) in the notification area, next to the time looking for icons of software disk utility

  (b) pass the mouse over it to check the name

  (c) right-click on the icon and select "Exit/Disable" or a similar option.

  Method 3:
  Make sure your computer is updated through Windows Update.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Update

  Method 4:

  Disconnect all unnecessary external devices such as printers / joysticks etc.

  Method 5:
  Put the computer to boot is a way to solve problems

  http://support.Microsoft.com/kb/929135

  Note: Please follow step 3 on the link if upgradation fails to return your system to a normal startup.

  We know what's going on and if we can be of any other assistance.

• I have the last El Captain MAC update fom and an iMac Mid 2015 retina but Lightroom refuses to use the GPU indicating a display error. Has anyone else experienced the same question?

  I have the latest update of El captain and an iMac Mid 2015 retina but Lightroom refuses to use the GPU indicating a display error. Has anyone else experienced the same question?

  I also got an iMac mid 2015 27 "retina and not have problems. But I have another option 'see the add screen pictures"deselected it's the ravages of a single reading. See screenshot of my graphics card.

  

• Installation and layout - by the end of 2015 iMac 27 "5K of RAM

  Ordered a new mac (end of 2015 iMac 27 "5K retina) with 8 GB of ram (2 x 4 GB).  I bought from another 2 x 4 GB of ram to do the 16 GB mac. What is the optimal layout for the 2 pieces of stock and 2 additional parts:

  1, New1, Stock 2, 2 new stock or

  Stock 1 Stock 2, 1 News 2 news

  Or it does not matter? Does it affect the double channel because they are 2 pairs?

  Thank you

  It's incredibly simple, install new RAM in the empty slots and that's all you need to do. Nothing to worry about at all!

• HP Pavilion g6-2330dx Notebook: keep displaying the "Windows Installer" dialog box and pressing OK button to restart over and over again

  Hello

  I tried to update my laptop Win8 to Win10, but before that Win 8 must be upgraded to Win8.1 then Win10. Unfortunately, I encountered the problem after you install the free upgrade to WIn10.

  I decided to use the system recovery and the source is from my USB.  (I created the USB key recovery).  The restoration was completed and started making configuration suddenly my laptop just because of the excessive heat caused my laptop stop does not complete the installation of windows 8 and finished to get the dialog box of "Windows Installer".

  I inserted the USB key, but it seems that its not reading. I tried F2 - mode of the system, but it only shows the Bios and other tests not the usual display of F2.  I haven't tried F11 and same thing no chance.

  My question is, how do I make my laptop back to the operating mode as the way to reinstall the entire operating system and HP Recovery Manager or HP configurations.

  Do I need to buy a CD of HP recovery my laptop?

  I have HP reactions appreaciate or someone who is ready to help and assist.

  Thank you in advance.

  Screen of the image below:

  

  Hi there @KierV,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I read your post on the Forums of HP Support. I understand that you had initially a question of upgrading Windows 10. After the upgrade, you have tried to restore on Windows 8 (previous version), and now you have issues going back.

  I did some research for you. I'll provide you with some troubleshooting documents that I had found.

  The first document is called a troubleshooting (Windows 8) HP system recovery problems. If this does not work, please follow this document called recover your computer from a USB flash drive. Please follow the troubleshooting steps in this document to see if you can get the USB recovery media you created to operate.

  If the USB key that you created still doesn't work after you troubleshoot, you can either you make on the Order Recovery Media-CD/DVD/USB and drivers HP Pavilion Notebook PC g6-2330dx Page or you can use the following link to create yourself a file number, then give us a call:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  
  File number and phone number are displayed.
  
  They will be happy to help you immediately.

  If you want to try to restore Windows 8, Windows 8.1 upgrade and then upgrade to Windows 10 once again, please read this document called upgrade to Windows 10.

  I hope this helps!

  Have a great day!