MIDI keyboard entry out of semitone (gray 3/oxygen 49 MainStage)

Having a problem where my midi controller (version M-Audio oxygen 49 gray) is read by MainStage 3 (3.2.4) half-step out (C3 poster and sounds like B2, D3 as c# 3, etc.).

13 "MBP running 10.10.5, 2.7 GHz Intel Core i5, 8 GB RAM, 128 GB solid state

Function "Patch transpose" MS is set to 0

Setting is at 440

44.1 sampling rate

It happened all of a sudden and applies to all saved concerts as well as newly opened empty concerts. Music entry is read correctly. The keyboard is equipped with no hardware to adjust the setting or the sampling frequency. It was working fine until this point. Any help is greatly appreciated!

You have another audio application running? Already happened when I opened the logic, which was fixed at a different sampling rate. Try closing all applications, to reopen the MainStage and if the problem persists, open the MS preferences and change the sampling frequency.

Tags: Professional Applications

Similar Questions

  • Very important question! Why my Apple wireless keyboard better and much stronger than my midi keyboard?

    I have a Yamaha psr-330 midi keyboard

    I have an Akai mpk261midi keyboard

    I have an Alesis v61 midi keyboard

    they all sound the same in Logic Pro X, I can barely hear the sound of the piano, the pressure sensitivity is out of whack, I basically just plug and play midi keyboards and use software instruments without changing anything in Logic Pro X... why does my little Apple Wireless (bluetooth, remember) clearer keyboard better, more responsive and much stronger than any general midi keyboard? its embarrassing to say the least!

    I have the volume to the maximum one time and even raised the gain on the software instrument "Piano Steinway tail" and still barely, I could hear a noise...

    Please help me I have no other solution... IV ' e tasted its best thanks to a computer keyboard dang, how is this possible?

    How can I get my midi keyboards sound as good as my computer wireless keyboard?

  • How to connect an old Fatar SL880 Mid-keyboard directly on a mac?

    Hello world

    I inherited an old midi keyboard Fatar SL880. There is no USB port, only two midi-out. I would like to connect directly to a mac and do work with some sounds. Does anyone know how to do this please?

    Thanks for your time,

    Richard

    Post edited by: blaneyart
    Sorry, I made a spelling error that would have changed the meaning of the question, Richard

    two outputs to midi? or an output midi and mid in?

    device & http://www.Sweetwater.com/Store/Detail/MIDIExpand?adpos=1O1 & Creative = 55226083081 c = & matchtype = & network = g & gclid = CMbllNaUqM4CFYiBfgodzK0Aig

  • can I play the guitar and midi keyboards at the same time?

    IM using the 3 main stage, I would like to play guitar and midi keyboards at the same time. I know that I can have more than one keyboard will at the same time, but I can't understand how to play the guitar too. I use a core Alesis 1 plug the guitar and a Keith McMillen 12 Step midi controller, he reads both just fine alone, but they play together. How can I get there? In addition, Im using a MacBook Pro OS X El Capitan.

    Thank you

    Mike

    You add a bunch of audio channels and affect the Core 1 Alesis entry?

  • I am trying to use the speakers on my midi keyboard as the default output for Windows 7 device

    I am trying to use the speakers on my midi keyboard as the default output for Windows 7 device. I have a midi keyboard Casio CTK-3000 and you want everything to sound out the two speakers on the keyboard.

    You can not.

    You can exchange midi data between the keyboard and a PC via the USB port. But not strong like the keyboard is not an audio device and therefore doesn't have the proper drivers.

    MIDI is not good in itself, it's just that a series of statements sent to a electonic module that transforms these 0 and 1 for sound samples. This isn't the same principle as an audio card/device.

    See you soon,.

    Jerry

  • Pitch bend wheel on my pc - 300 midi keyboard Roland. The Modulation part works but when I try to pitch bend a note using the same logic of wheel just plays a continuous note. Can someone give me some advice please? Thank you

    Hi, I have a problem with my pitch bend wheel on my pc - 300 midi keyboard Roland. The Modulation part works but when I try to pitch bend a note using the same logic of wheel just plays a continuous note. Can someone give me some advice please? Thank you

    It's a delicate issue... like some patches cannot stipulate pitchbend...

    But to quickly test your pitchbend wheel actually works properly...

    Download the free lunch monitor...

    Snoize: MIDI Monitor

    Run and see if it sees pitchbend data sent by your keyboard... and therefore by logic.

  • How can I download more sounds to be used with a MIDI keyboard?

    In my class of contemporary music at school, we used a little Garageband and there was a lot more categories and sounds to play with the MIDI keyboard. I also want more sounds, particularly the category of instruments in the world that I have not the 10th of Garageband, the same used copy to school, I tried to restore Sound Library several times and there is no change. So far, I have 14 categories for instruments and there was much more to my school.

    Thank you!

    The world instrument sounds are part of a Jam Pack. The metaoutil must be purchased at eparately, but is more sold by Apple. You can buy however by purchasing Mainstage. It will be install all the Jam Packs five inthesame folder, where the sounds of GarageBand are installed, so you can use tem with GarageBand.

  • How Casio CTK 710 USB MIDI keyboard work in Windows Vista?

    Original title: Vista compatilbility issues

    How do you solve compatibility Vista to Casio CTK 710 USB MIDI keyboard?

    Hello

    1. He worked in the earlier version of the operating system?

    It may or may not work, but you can try to download and install drivers XP for Casio CTK 710 USB MIDI keyboard and run them in compatibility mode and check if the problem persists.

    If the problem persists, contact the manufacturer to better help.

  • Alt/option key disables the keyboard entries

    Hi-

    It seems that if I press the ALT (option) 5 times quickly, it disables my keyboard. It seems also occur that if I hold down the option for an extended period of time, often while I use Photoshop.

    It stops completely from all entries to the keyboard, essentially breaking of the keyboard until I press it a lot again to make it work. I can't find out how to disable this in keyboard/accessibility settings, so I came here to help.

    -Sometimes, with built-in MBP & my bluetooth keyboard, this is not specific to a keyboard. Seems to be a computer problem.

    Thank you!

    Are you still using 10.6.8 Snow Leopard?

  • For MacBookPro vintage keybord Roland MIDI keyboard driver

    Hello to all the Apple community,

    With apple for years, I'm currently looking for solutions match my vintage midi Roland Keybord

    for my MacBook Pro to play in garageband.

    This midi Roland Keybord is a vintage model (90 or less)-c' is the KS Pro 88 model.

    Professional and full of incredible sounds. He used to work until I changed the OS to El Capitan.

    Apple is full of solutions and the amazing community members. Maybe you have a few pieces of advice or solutions,

    This music instrument of Roland to Apple links, I'll be recognizing and rewarding for those who have the key to this.

    Spend a beautiful summer, looking forward to reading you

    Best

    Niko79

    Hey there Niko79!

    Welcome to Apple Support communities, and one was happy too! GarageBand is an amazing place where we can all get creative and publishing wonderful content. I, too, have an amazing keyboard. Mine is an older Yamaha that I tried to connect with my Mac. In most cases, all that is needed is an update of the driver from the manufacturer. Here is the GarageBand help information:

    Be sure to follow the instructions supplied with the keyboard, which may include the installation of the driver appropriate to your computer. Check the Web site of the manufacturer for the latest version of the driver software. If you are using a MIDI interface, remember to follow the instructions provided with the interface.

    Due to the specificity of your device, the best solution would be to join Roland Support to confirm if such update is for OS X 10.11.6 El Capitan.

    Roland support

    Best regards

  • Satellite C660-2DV - double keyboard entry & do not delete

    Hi guys

    I have a laptop C660-2DV PSC1LE and I have problems with the double entry and do not delete the letters too.
    I have searched forums and have tried the updated bios according to Toshiba, but the problems persist.
    I am running Windows 7 ultimate 64-bit and all windows updates are

    Any help will be greatly appreciated because it is really annoying to the family the laptop almost unusable.

    This post took almost 5 minutes, on the right an editing tool,

    Have you noticed the same problem with keyboard using an external USB keyboard?

    Please check because very often, these problems were caused by a malfunctioning internal keyboard.

  • Keyboard comes out on my new Thinkpad Edge

    My wife has just received its new Thinkpad Edge (0196-26U 13 "screen, Intel processor, matte black). While not as energetic as our boosted T61 or T400, it is much lighter and adapts to its needs.

    Most of the keys on the keyboard feels good, but our model seems to have a flaw. The upper right corner of the keyboard tray pops out regularly. I can click it back in but there is a visible bulge and with a slight flex of the body it comes out back. In addition, the right side of the END key is depressed compared to the rest of the keys.

    I provide Lenovo today to inquire about a replacement part.

    Anyone else having this problem?

    Received the replacement keyboard today (the day after). It was a simple swap out. The original was clearly misrepresented in the upper right. The replacement unit has a millimeter to give in the same corner, but the framework comes out with an audible 'click'. Not perfect but does not interfere with my typing.

    The keyboard is attached to the frame by tabs at the front and two screw centered on a third of the way left and right. This keeps most of the keyboard firmly in place, especially in the middle where you press the small head of gum. The corners are only kept pressed by the rigidity of the frame of the keyboard. Thus, given any incompatibility with the chassis, there got to be some give.

    That's life I guess.

  • software midi keyboard?

    Hi, is there a program I can use to play a keyboard usb Akai through an imac g3 with 10.4?  I need love features as Ableton Live provides - just a way to make his background!  Thank you!

    Hi Radford,

    You probably already have it...

    In utilities > Configuration Audio and Midi > Midi tab, see if you can set up there.

  • How to DISABLE the keyboard entry Alt + NUMPAD digital ASCII.

    Hello

    The default behavior of Windows 7 (and as far as I know all the previous versions) is to enter the ASCII codes to the ALT keyboard + keypad. For example, Alt + 230 will produce "µ". If NUMLOCK is turned on or not makes no difference. In addition, this applies only to the NUMERIC keypad, not the 'normal' arrows

    This behavior interferes with an app I use (specifically, both the application and Windows seem to react to the keystrokes, which is annoying).

    Does anyone know how to disable this method of entry completely?

    Thank you

    -phil

    I don't think that there is a way, I'm sorry.  AFAIK this is the keyboard itself sends ASCII of Alt and number codes.  http://Twitter.com/graymalkinsblog http://practicalhardware.blogspot.com/

  • Why can't get my Midi keyboard a touch ION 49 to work with windows 7

    Now, I tried a few weeks to get the window to see the keyboard with various music software.

    I plug it via Midi or via the usb port and it will not appear as a DVICE connected to my PC.

    There should be no plug and play no need for drivers of devices

    Any help would be appreciated.

    I have installed and reinstalled the software and even tried to connect to a laptop without a bit of luck.

    I know that the device works because it was connected to my brothers PC!

    have concert of window 7 4 RAM and a 500 GB hard drive.

    Thank you

    George Henshaw

    Henshaw

    So, what software are you talking about?

    You realize that you will need a DAW and a soft-synth to use the keyboard without a Midi sound Module?

    If W7 does not recognize the keyboard here is the dramatic thing to make last ditch attempt.

    Go into Device Manager and uninstall all USB ports. Then restart. Let W7 do its thing and then connect the keyboard. He finds? BTW, doing this means that if you have any other USB device, you must let W7 "drivers".

    See you soon,.
    Jerry

Maybe you are looking for

  • My Canon MP980 will not print 10.11

    I just bought two sets of very expensive cartridges for my printer Canon MP980 to print some important documents. Guess what? Is no longer, it will print in El Capitan. It shows the document sent to the printer and the arrows go awry, but nothing hap

  • 15z beats Special edition: whenever I turn on my computer,.

    Yesterday, when I turned on my computer, I got a black screen that had white text. He read in this format: Hard drive error Run the hard drive Test in the diagnostic system. Hard disk 1 (3f1) The F2 System Diagnostics For more information, please vis

  • How to make a screenshot of a game of Chess Titans?

    I play a game of chess with a friend using CHESS TITANS and you want to send a screenshot of the Council for her.  How can I do this?  I use Vista 32. Thank you! original title: HOW can I TAKE of CAPTURE of the SCREEN A CHESS TITANS?

  • W8 2000 HP recovery using factory disks

    I have HP 2000-bf69WM with the W8. Failed hard drive. He passed one of the two tests of system bios and a failure. Sounded good in the docking station but tumbled when tried to access data! You had to buy new HD (WD Black) and ordered HP recovery dis

  • Updated BlackBerry Z10 10.2.1.537

    Downloaded via link, bombed twice now to 68 and 66% during installation. Think I should try OTA? Am installed, while it took 3.5 hours, now when I call any number in my contacts list, my answers ex wife phone