Satellite C660-2DV - double keyboard entry & do not delete

Hi guys

I have a laptop C660-2DV PSC1LE and I have problems with the double entry and do not delete the letters too.
I have searched forums and have tried the updated bios according to Toshiba, but the problems persist.
I am running Windows 7 ultimate 64-bit and all windows updates are

Any help will be greatly appreciated because it is really annoying to the family the laptop almost unusable.

This post took almost 5 minutes, on the right an editing tool,

Have you noticed the same problem with keyboard using an external USB keyboard?

Please check because very often, these problems were caused by a malfunctioning internal keyboard.

Tags: Toshiba

Similar Questions

  • Satellite C660 - new internal keyboard does not work

    Hello

    I'm completely stuck I have a portable satellite c660 keyboard did not work.
    So I bought a replacement keyboard and installed and checked in the Device Manager and it says it is there and works correctly, but the replacement keyboard still does not work.

    I updated the bios and uninstalled the keyboard drivers and reinstalled them that I've done everything I can think off to try and get this new keyboard working but I am having no luck and could so with some assistance.

    Have you ever checked if the USN external keyboard works properly?

    I ask because in the case where the external keyboard does not work properly, the internal keyboard problem could be related to faulty keyboard controller (motherboard) or a problem of system m.

    In case the external keyboard would work properly, you had any luck with the new keyboard. It might be possible that the new keyboard is malfunctioning.

  • Satellite C660 - is don't turn does not on

    Hi all

    Just got a new laptop Satellite C660-PSC1LA-00J001, which initially had 2 GB of ram in the shop, but has been improved with another 2 GB to 4 GB (upgraded in-store). Have unpacked box and the connection of all the cords power supply etc., power button and a red light entry the. After that a little more an another green light came. After a few other time two lights are green. However, the screen remained black. I left it like that for two years and a half hours recommended to set the duration, but it did not a thing since. I tried to turn it off by holding the button for a few seconds, but it still doesn't react.

    It sounds like this problem is to do with the new ram module that has been placed in it? I don't know that I'm confident enough to begin by removing and trying again or not. Shall I take back to the store? Or maybe you guys ideas to try. I don't want to destroy the laptop when I have not used yet. I know a little about computers but did not trust in case of problem with my limited knowledge. Any ideas greatly appreciated.

    Hello

    The initial configuration is possible if your computer starts correctly and Windows should be started. If you n t see anything on the screen it seems to be a serious malfunction of equipment.

    Anyway, these things shouldn't t happen on a new laptop and in your case I return the phone and ask for a replacement model. I m that the seller has other C660 models in range to take another one that you can be happy with your new Toshiba computer ;)

  • Satellite C660-28 d - keyboard and touch pad problems

    Hey guys,.

    In the past months, my laptop had become almost unusable.

    It began with the key odd work stoppage or becomes difficult to use, but now it happened to many of them and last night my touch pad stopped working all together.

    I'm not really a tech head and fight with it.

    I have a Toshiba satellite C660 28 T.

    Any help would be thank you very much.
    Maybe even a factory reset?

    I don't know how to proceed.

    Concerning
    Paul

    Hello

    With regard to the problem of keyboard:

    From my point of view of the few sounds of keyboard described as a material problem internal related dysfunction... probably in order to solve this problem, the keyboard should be replaced... just to make sure that your internal keyboard is affected, please join the external USB keyboard and check if it works properly.
    If you see any problems, the problem is no doubt by a malfunctioning internal keyboard and as mentioned earlier, you will need to replace the keyboard.

    Regarding the touchpad:

    I'm not sure if the two issues are interrelated, but the touchpad can be disabled by using the function keys... I recommend you to check this... (function key details are also in the user manual)... you can also try reinstalling the touchpad drive.

    Tip: this forum contains many discussions about similar problems... so I recommend you to read the recommendations posted in this community.

  • Satellite C660-115 - error message "Gfxui works not" at startup

    I got a Toshiba Satellite C660-115 Windows 7 and at startup I get the message ' gfxui works not ", can I ignore what my laptop seems to work ok.

    It is a problem with the GUI GUI Intel.
    You need to reinstall the Intel graphics driver.

    Visit the page of the Toshiba UE driver and download and save the correct Intel driver

  • Re: Satellite C660 - 1 M 0 - battery does not work long

    I have a new Satellite C660 - 1 M 0, and after using it for a week, the battery does not as long as compared to the first time that I used it.

    I heard that a charge of initial battery life of 8 hours is required before the 1st use. Is this true?

    Hi richardvdoran,

    The battery time depends on usage and what you do. For example if you run a large number of programs and work with a high CPU utilization low autonomy and requires AC adapter / CC soon. Also surf the Internet needs battery power.

    You can improve the battery life if you use the eco mode power plan. This will reduce the brightness and other things to improve the battery life.

    First battery charge time may be 8 hours but that's different and according to other things.

  • Satellite C660 - 1 M 0 - FN does not work

    I have a laptop Satellite C660-1 MB. My FN key does not appear on the top of my screen.
    I tried to uncheck that the "function key all disable them" under the map flash but it still does not.

    I hope you could help me guys.
    Thank you.

    It works in the home premium to Windows 7. Will this fix if the system restore is installed?

    The menu Flash card may appear at the bottom or top of the screen. It depends on the settings you can change in the settings of Flash Card Toshiba (all programs-> Toshiba-> Utilities)

  • Re: Satellite C660 - 1 CL-wireless button do not work running 8.1 Win

    Hello

    my wireless button does not work. I have windows installed 8.1,
    I have vap and installed flash cards and still does not.

    Any suggestion?

    As much as I know the Satellite C660 can't win 8.1
    This means that the drivers and Toshiba tools are not released to win 8.1.
    I think you can use Win 8.1 but be aware that there is no guarantee that you can use all the features of the special specifications.

    > I have vap and installed flash cards and still does not.
    I doubt that this is correct since VAP don t exist to win 8.1
    Toshiba system driver is the successor of the VAP in case you use Win 8.1

    However, try to install the driver of Toshiba and Toshiba function Key Utility system to win 8.1
    You can download this software that has been released for other series like Sat C870 for example.

  • Satellite C660 - the disc drive tray opens not requested

    When I start to read a disc in the disc drive of my Satellite C660 drawer opens each time.
    Who knows how to solve this problem?

    To be honest I do not understand what bin do you mean exactly.
    Can you please tell us what disc you want to play and can you pleae make a screenshot of this plateau.

    It will help me to understand what you mean exactly.

  • Re: Satellite C660 - after the BIOS update can not connect to Internet

    Hello
    I've recently updated my BIOS on my Toshiba Satellite C660 1.70.
    Everything goes well, but when I rebooted and tried to connect to the internet, he could not.

    I thought that there was a temporary error, but it's been 3 months and it has still not repaired.

    Can you help me? Thank you!

    Have you tested with WLAN and LAN connection?
    Have you noticed the same problem using two connections?

  • Re: Satellite C660 - 1 3 - number "plugged in, not charging."

    Last year, I bought a portable Satellite C660 - 1 to 3 of the United Kingdom; even today, I'm using the factory settings and running the operating system originally installed Windows 7. Here's the question I started yesterday face to leave:
    -Even when the battery is connected and the laptop running, the power meter shows a decline, with the notification level "plugged in, not charging." The orange LED keeps blinking

    -However, when I completely stopped the laptop, without touching anything anyone (not even touch the adapter or the power cord), the orange LED indicates the battery charging process stops flashing and becomes stable

    -Turn the laptop, for about 1 minute or so, the battery seems to be loading (message of orange LED flashes do not and "clogged, load"). However, soon again the orange LED starts flashing and the message of nuisance comes once again to the top

    A number of things:
    -the battery seems to be working well and load properly when the laptop is stop (in fact, until a few days back, the battery used to show 02:30 hours of time available on 100% charge level)
    is there a problem with the operating system? no idea on that

    can experts help me solve this problem? I really don't want to approach the Service because of the long distance involved.

    concerning
    -Biren

    Hello Biren

    Not sure if I can help you but I would like to give you some advice.

    (1) check if your BIOS is up to date. If Toshiba driver European page provides a newer version, then update the BIOS. In addition, set the default BIOS by pressing F9 and save modified pressing F10.
    (2) try to calibrate the battery. To calibrate the battery you completely discharge the battery and charge it again. Repeat 2-3 times in the line.
    (3) remove the battery and the AC adapter and press the power button / stop (30 sec long) and then connect the two parts and check if the LED begin to blink.

    Finally, I think that the laptop needs to be tested using new, good battery to work. But if the issue still persists, then I guess that your motherboard might be affected.

  • Satellite C660 - 2 EV starts plus-Boot not found Bishop

    I don't know how but my grandson has seriously broken the Satellite C660 - 2 EV

    Boot from the disk - Boot Mgr not found

    Boot from the recovery partition - Boot Mgr not found.

    Boot from an installation (generic) Windows 7 disk - boots, begins to install, finds, he does not have a required driver (but don't tell me what it is). Allows me to access the drives C:, D:, E:, and X:

    Boot from recovery Toshiba DVD. White bar gets about 25% on the whole of the screen then stops with "You have removed a USB support during installation" (or something like that, laptop currently in pieces).

    Removed and replaced the memory and DVD player. Removal of the HARD drive connected to my PC via the USB adapter and scanned the two visible partitions (300 GB each) at the level of bad sector. No problems.

    Help! I'm out of options.

    Laptop must be functional (basically) as it starts from DVD (non-Toshiba).

    HARD drive seems OK when verified externally and start (Non-Toshiba)

    What remains?

    Everything that you have done is good, and I would do the same tests.

    The value of the default BIOS and test it with another HARD disk, if you can get one for testing purposes.
    I can't say for sure, but somehow, I feel THAT HDD is the troublemaker.
    Try installing the DVD of initial recovery on the new HARD drive.

  • Satellite C660 - 23 M: Volume OSD works not under Fn Key + 2 or 3 using Win7

    I have a satellite C660 - 23 M and have recently reinstalled Windows 7 to get a clean install without bloatware.

    I installed the utility Support Flash Cards and value-added products and, on the whole, the functionality of the keys Fn + F OK work and give an OSD appropriate, so that we can see what happens when you use key controls.

    Unfortunately however, Fn + 3 (the volume) and Fn + 4 (increase the volume) everything works properly with regard to actually proceed with a reduction or increase the volume control, do not show a suitable simultaneous OSD that allow to confirm the effect and adjust the level of the volume actually set.

    Can anyone help with a fix/solution please?

    Maybe stupid question now, but worked it as you wisch with Win7 preinstalled original?
    I ask this because on my NB520, I use the same combination of keys, but volume OSB is not displayed on the screen.

    I can just see this symbol in the taskbar to change.

  • Some of the Satellite A660 - 11 M keyboard keys do not work

    Hello

    My Satellite A660 - 11 M keyboard does not work properly. Some keys type, others type the wrong letter/number.
    Replace the keyboard usually solves the problem? Keyboards are available for this model?

    Furthermore, juice was accidentally spilled on it weeks, so I guess that's the cause of the problem.
    Thanks in advance.

    Hello

    Yes, maybe the question is related to the spilled juice.
    I don't think that the replacement of keyboard can help you

    The new keyboard can be ordered from a Toshiba ASP in your country.

    You will find here all ASP world-wide:
    http://EU.computers.Toshiba-Europe.com-> support download &-> find an authorized service provider

    Welcome them

  • Satellite A200 - 19K: double keyboard lights up and the mouse no longer works

    Hello

    I just brought a notebook a200 19 k and the double keyboard lights up and the mouse no longer works.
    I can't find why it does this in the manual and what is the purpose of light with symbols on it.

    The symbols have a purpose. Thank you very much

    Hello

    As far as I know that not all mobile A200 were shipped with this function called TouchPad/Dual Mode Pad touchpad

    The dual-mode tablet buttons provide many different functions such as:

    1.) button to -> it toggle cursor mode and the mode button.
    When you switch the button mode button flashes blue and the mouse does not work

    (2.)-> volume button increases or decreases the volume of the speakers and headphones

    (3.)-> e-mail button starts you mailbox to receive and send emails

    4.) button ConfigFree -> starts the ConfigFree tool

    5.)-> Windows Vista Photo Gallery button starts the Windows Vista Photo Gallery

    The other three buttons to the bottom of the trim can be configured with different functions.

    Please refer to the properties for pad synaptic dual for more details!

Maybe you are looking for

  • I want to top it keep my old passwords, locked out of Bank

    My machine keeps my old password. I'm locked out of my Bank. They send me a new password, but I get locked again because it has kept the old one. John Calthorpe

  • HP 450-a114: adding ram for pc slimline hp 450-a114

    I have two ram slots on my motherboard, but only one at a time working with RAM. They both work when used by themselves. But when I add ram to the second, it won't start. Wants to repair itself in a message, but never don't fix. Maybe im not giving h

  • Updated bios bad Thnikpad T510

    I run the windows bios update application and go further for the same time, when I get back computers was stacked with big THINKPAD bios image, I have rebooted but nothing still stuck on THINKPAD, I can go change bios and records everything, blue but

  • How can I connect HP 3200 laser scanning service to my PC

    I want to turn my scanner on my printer to my PC how can I do? * original title - I have a hplaser3200 printer. This printer fax scan service, so how do I hook up the service to scan to my PC? *

  • Can not hear the sound of the UFO PROJECT PART6

    Hello, I am one of those who learn After Effect by your training material on the Adobe Web site.How to add video special effects | Tutorials Adobe after effects CCI don't hear the sound of the PROJECT PART6 UFO. WHAT SHOULD I DO?The speaker and the t