Migración vCenter 2.5 U6 a vCenter 4.1

Similar Questions

• Migración VCenter Server Appliance

  Is, buenos dias, creamos UN laboratorio para experience con 5.5 vSphere vCenter Unit 5.5, el tema y're realizamos Migración of the Máquina virtual del vCenter, en esta oportunidad migramos data store (local del ESXi-> shared storage). Máquina estaba burning y mirabamos el proceso connected al vCenter device desde vSphere Client, in an approximately en UN 20% of the task the conexion perdimos momento y no idea if tenemos el proceso aun continued fallo, el tema o are accediendo al ESXi as aloja directly the MV no permite reiniciar the Máquina y aun continued in el local data store.

  Por favor ayuda!

  Saludos

  Hola,

  por lo that comment seems that the Migración del fallo por algun reason vcenter tarea.

  Of todas maneras, you can see las tasks that estan ejecutando en el servidor esxi este following KB:

  VMware KB: Collection of information about the tasks in VMware ESXi/ESX

  Prueba a reiniciar los management agents, you can sea of ayuda:

  VMware KB: Restarting management on an ESX or ESXi host agents

  Kind regards

  Pablo

• Migración vCenter 5.5 has 6.0

  Hola is colegas.

  We are planning our vCenter 5.5 actulizar 6 y posferiormente los hosts realizando estos pasos:

  1. Law, el vCenter dejando las bases en el external to SQL Server.
  2. Act Los officers led vCenter en los hosts 5.5 current.
  3. Hosts the Liberar los unos, para luego formatearlos para instalarle ESXi 6.0 cero.
  4. Add el nuevo 6.0 formatted el vCenter ESXi hosts.

  Excesivo los pasos 3 y 4 hasta restore todos los los cluster hosts a 6.0

  Ustedes is imaginan otra manera hacerlo? tiendo are lo be replaced by Recomiendan VMWare.

  Any of ustedes lo realizó esta manera? any you can share some experience.

  MUCHAS gracias.

  Is,

  Addition of the arriving hacer con los pasos that comment antes.

  Act in y el del Update Manager dimos en el porque fallo Problemas SQL Sysadmin permissions con el SQL Server quedaba 2 problems in SQL Server 2008 R2 than necesitaba tener el SP3 wont el y el usuario vCenter. Don't con permissions than especifica el instalador no production.

  Con el vSphere Client cuando breakfast el buscador MV, worm 2 adjunta 1 ver imagen imagen, y is soluciona TR ingresar usuario is clave para el connection sin el checkbox "use Wiundows session credentialsl.

  What no ver como arriving to soluciona, are el boton para revertir el instant as in any MV selecionen el boton esta activo, against esta noted that habla del problema. client vSphere 6 - return to bug the snapshot

  Any novedad the comparto.

  Saludos thanks por su tiempo.

  Martin Morana

• VMotion of vcenter server

  Hola a todos...

  Queria preguntaros por el procedure... is that no tengo claro training...

  Tengo una instalacion con esxi 5.0. con virtualizado of vCenter. El esta compuesto por different networking switches distributed. El caso are Necesito UN mover el vcenter United Nations don't cluster nuevo as no tiene compatividad CVS por lo no puedo mover Máquina en caliente... what prodecimiento should seguir para mover el vCenter al nuevo cluster?

  Gracias por todo

  Saludos.

  Hola,

  Claro are realmente las back options son buenas las back first, lo suyo are the first that are only guaranteed going to you a poder hacer lo dedicate sin problema y What're realmente're Pena TR utilizamos los rocking distributed. A falta del vCenter segunda if Heartbeats are una opcion not solo as el tema no esta in tener mas tarjetas para add a los estándar sino en migrar hacía todo, Máquinas Office ago switches y tarjetas physical.

  Cuando migra is a distributed switches lo suyo're keep the structure of standard por switches if any the we need of nuevo in algun momento. If conservamos, a caso como el tuyo what hariamos con una minima servicio lost are migrarlo nuevo todo a los rocking estándar para leave como lo antes migrar a los rocking distributed only. UNA vez esta todo con los estándar puedes realize las operaciones necessary con el vCenter y una vez a terminado vuelves a perform the physical cards Migración y Máquinas Office a los switches distributed. Been hay than planificarlo adecuadamente para realize the Migración of forma over-tightened, con minimum lost of servicio y no perder el the Red of management in any momento y tener siempre cierta unit, para ello lo mas seria por dar unit start spending has the Red of management con los rocking estándar antes touch nada in los distributed TR absolutamente todo lo tienes Los distributed. Think it una buena practica keep siempre con unit management red con switches estándar para siempre available tenerla in aunque is caiga el vCenter.

  Respecto del procedure ten in a hotel than en cierto tipo Medio Ambiente, sober large las todo y con mas passes distributed el vCenter very crítico y hay than garantizar una 24 x 7 availability is often operaciones no should be necessary, only plots the propia should doing una Máquina fallos o parada del vCenter. In any case alguna vez no estara in available there para esos casos tenemos las comentadas options back.

• Alerted vcenter Service Health

  Hola,

  Instalar UN ESXi5.1 u1b Acabo y el configurado he SSO con UN openldap 2.4, is apparently running the authentication correctamente esta.

  Solo than he detectado Québec tanto in the vsphere client com el customer web site, el apartado vcenter health me appears a warning in el apartado 'Trust followed Ldap domain changes', captured Editor

  Estoy realizando Migración of 4.1 has the 5.1 con vcenter cero nuevo, y este con WARNING 4.1 only me appears.

  Con el Vsphere client if uso the option use "session of windows credentials" don't me real, pero the same sesion July los datos manualmente TR, desconozco TR can be alguna Relación con lo anteriormente EDI

  Gracias

  Hola,

  Solved, el equipo no is there of forma correcta al dominio y no podia recover users correctamente

  Saludos

• Problema con en Vcenter Converter Vsphere 4.1

  Buenas tardes foro:

  Tras ser seguidor este foro asiduo me he did a participar in con el the cuestion of siguoente:

  Tengo una pequeña infrastructure montada con back servidores Esxi4.1 y una cabina iSCSI, esta esta based on vSphere 4.1 Essentilas more instalacion y hasta ahora todo worked perfectly. Put problemas han started try realize PSV conversiones al con el Vcenter Converter.

  MI servidor Vcenter donde esta el esta in una VM mind en propia infrastructure converter wont y cuando beginning el proceso Migración P2V of any physical todo comienza well, continuo con equipo el Assistant, is instala officer converter Máquina fisica en el y cuando comienza importación propiamente dicha host chosen al migrar y tras crearse the VM in el comienza el proceso y al 1% to para , da error y borra VM created.

  He visualizado los that connect already el converter (los transcontine in formato .zip) pero no veo nada por lo me gustaria saber (supongo if) alguien este foro you can escahrles if a vistazo y comentarme than you can estar fallando.

  The rest of the infrastructure fuciona correctamente y por ultimo qe decir the VM in the what instalalo Vcenter are Nations United W2008 Standard x 64.

  Gracias por todo y saludos.

  Hola peti_opc:

  Échale a vistazo al ultimo hilo you puse. Revisando los newspapers he comprobado than tienes problemas con los certificados SSL. Como you dijo, ojea el hilo earlier than you have a user that explica como solucionarlo.

  A greeting.

  --------

  José Luis Gómez Ferrer de founder Couto of PiPo e2H Blog: http://blog.e2h.net

  If upon that esta otra respuesta utility fue, por favor any o da el voto. Gracias.

  If you find this or any other useful answer, please consider awarding points. Thank you.

  

• VCenter 4.1 nuevo is you can in SQL2008R2?

  Hola y buenos dias, tengo una duda con respecto a version of database than voy a usar con el vCenter.

  Hasta ahora estaba en en el vcenter local y he ido actualizando por las different vcenter versiones y ESX than llegue hasta has the 4. In este punto como mi vcenter estaba en UN W2k3 32 bit I made the Migración como me recomendo jose arcos con el datamigration procedure y fue maravilla, ahora estoy in 4.1 are

  Posteriormente is full the database than hay local del vcenter espress y también otro compañero me dio the lo cual estoy grateful pauta.

  Durante varios meses he trabajado asi sin problemas large, (the fact that el number vcenter hacía referencia al viejo del me ha powered algun lost pero muy unburied) aun asi he vueltas a montar UN 0 virtual Center nuevo estado dandole, (para what no quédé referencias obsoletas don't con respecto a infaestratura vieja), are me puedo enabling el lujo perder Quebec information in the Hay BD.

  Hace poco rises a cluster activando EVC following el documento vmware el nuevo y los uno not welcome me already moverlo.

  Tengo mantenimiento con esto intento open a incidencia raiz is vmware y me encuentro con respuesta as no cumplo don't con las normas of BD (tengo 7 host y unas 65 vm) y me say what no solucione until este tema no me atienden.

  Sin comentarios.

  Bueno pues vale, in the empresa tengo el server of DB en SQL2008R2 corporatido donde estan todas las BD, miro the vmware documentation en y no veo referencia an esto

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1022104

  MI pregunta... aren't esta soportado el SQL2008R2? No vaya a ser as haya algun documento mas reciente than por lo as the sea me lo haya pasado por alto.

  PD: don't con respecto al ESX than no podia are mover is cual are el problema el nuevo cluster lo he prepared para poder hacer vmotion y este servidor're a 5450 X y el resto X 5560 y X 5660. Y a los mas nuevos el x 5450 dferencia if you VT pero without Hyperthreading.

  Gracias of photos there a greeting

  Hola irasines:

  Está soportado, puedes comprobarlo in el documento vSphere compatibility tables page 11. Need in version 4.1 U1 estar solo

  A greeting.

  --------

  José Luis Gómez Ferrer de founder Couto of PiPo e2H Blog: http://blog.e2h.net

  If upon that esta otra respuesta utility fue, por favor any o da el voto. Gracias.

  If you find this or any other useful answer, please consider awarding points. Thank you.

  

• How to stop a particular vCenter alerts

  Hello

  I know that I have asked a few questions simple and stupid these days, but believe me, I got this tool foglight for installation in our environment that I have no idea, but no other no appointment... must be done. so tried my ways.

  Scenario 1:

  I have 3 guarded vCenters currently in my FVE 8, we will do a normal maintenance on a vCenter, how can I stop all alerts for this specific vCenter. What I have to edit each rule or is it possible to stop the agent that collects the data... something like that.

  Scenario 2: I want to add a new environment of vCenter for my tool existing Foglight, how this can be achieved.

  Your prompt response will be highly appreciated.

  Thank you

  Kind regards

  Learn 2 eager

  Scenario 1 - you can create a power failure for alarms http://edocs.quest.com/foglight/5611/doc/wwhelp/wwhimpl/common/html/frameset.htm?context=forge&file=AdministrationConfiguration/SettingUp_Ref.41.php&single=true

  Scenario 2 - you need to check if you are sized to the guarded vcenter added primarily for your follow-up global is not affected by the added objects/metric/alerts. Regarding the addition of a vcenter, you do this in the virtual environment dashboard > Administration tab.
  Follow these instructions http://edocs.quest.com/foglight/571/doc/wwhelp/wwhimpl/common/html/frameset.htm?context=cartridgeInf&file=vFogStorage-install/1_GettingStarted.28.php&single=true

  Hope this helps

  Golan

• VMware vCenter plugin to MD-storage arrays - error

  Hello community,

  I need your help by installing the plugin vCenter for MD3620i.

  After installing it, I can't use the plug-in in the vSphere client error:

  The following error occurred during the download of the plugin script of
  vCenter-IP-address/.../Configuration.xml:
  Request failed because of a logon failure. (Unable to connect to the remote server)

  What do you think could be the reason for this error?

  Thank you!

  Hello

  I have the same problem. The solution is here

  austintovey.blogspot.fr/.../Dell-MD-Storage-Array-VMware-vCenter.html

  Best greetings

• vFoglight unable to connect to vcenter after disabling sslv3 7.0

  Y at - it a patch for vfoglight 7 which allows for connectivity to vcenter TLS?

  After you disable SSLv3 in vcenter, foglight is unable to connect.

  [Quartz [0] - 90] ERROR com.quest.agent.esx.task.RelationsTask - error when running: ERROR: VI SDK invoke exception: javax .net .ssl .SSLHandshakeException: remote host closed connection during handshake

  java.rmi.RemoteException: VI SDK invoke exception: javax .net .ssl .SSLHandshakeException: remote host closed connection during handshake

  at com.vmware.vim25.ws.WSClient.invoke(WSClient.java:183)

  at com.vmware.vim25.ws.WSClient.invoke(WSClient.java:125)

  at com.vmware.vim25.ws.VimStub.retrieveServiceContent(VimStub.java:1409)

  to com.vmware.vim25.mo.ServiceInstance. (ServiceInstance.java:85)

  to com.vmware.vim25.mo.ServiceInstance. (ServiceInstance.java:69)

  at com.quest.vmware.api.connection.VIService.connect(VIService.java:60)

  at com.quest.vmware.api.connection.VIService.login(VIService.java:82)

  at com.quest.agent.esx.task.ESXAgentTask.connect(ESXAgentTask.java:178)

  at com.quest.agent.esx.task.ESXAgentTask.run(ESXAgentTask.java:116)

  at com.quest.agent.esx.ESXAgent.runTask(ESXAgent.java:407)

  at com.quest.agent.esx.ESXAgent.esxRelationsCollection(ESXAgent.java:469)

  at sun.reflect.GeneratedMethodAccessor42.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at com.quest.glue.core.services.EquivalenceInvocationHandler.invoke(EquivalenceInvocationHandler.java:70)

  at com.quest.glue.core.agent.AgentInteractionHandler.invoke(AgentInteractionHandler.java:186)

  to com.sun.proxy. $Proxy55.esxRelationsCollection (unknown Source)

  at sun.reflect.GeneratedMethodAccessor42.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at com.quest.glue.core.agent.scheduler.CollectorCallback.invokeCollector(CollectorCallback.java:162)

  at com.quest.glue.core.agent.scheduler.CollectorCallback.execute(CollectorCallback.java:130)

  to com.quest.glue.core.scheduler.quartz.QuartzScheduler$ ScheduledTaskSequentialJob.execute (QuartzScheduler.java:716)

  at org.quartz.core.JobRunShell.run(JobRunShell.java:202)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:895)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:918)

  at java.lang.Thread.run(Thread.java:662)

  2015-09-01 15:25:31.798 ECHO FATAL [Quartz [0] - 90] com.quest.agent.esx.task.RelationsTask - the agent could not establish an SSL secure connection to the VirtualCenter.  Please check your configuration of the agent in order to ensure a connection correct information has been entered.

  2015-09-01 15:25:31.798 ECHO

  Thank you

  Hi JLAPRADE,

  I read a similar case, it seems that the problem could be solved either:

  1) that allows SSLv2Hello to vCenter, or

  (2) upgrade to the latest Foglight/Agent managers to the latest version.

  Regarding the #1 option:

  Client configuration file updated the vpxd.cfg in vCenter. It's the line that needs to be changed:

  TLSv1

  To add the SSLv2Hello Protocol, the client he added after a comma:

  TLSv1, SSLv2Hello

  This solves the problem for this client, but you can check with VMware.

  If the problem persists after trying these solutions or if you have problems, their implementation, please open a request of Service (SR) with the support and mention this thread.

  This is where an SR can be created: support.software.dell.com/create-service-request

  Concerning

  Gaston.

• Problem with OpenManage integration for vCenter - OMSA status: update required

  Hello

  We have a problem with the configuration of OpenManage integration on a vSphere 5.5 U2 Cluster. We have deployed IMO for vCenter v 2.3.0 build 290 aircraft, and we have installed manually OMSA VIB v7.4.0.2 on our 5.5. U2 ESXi hosts.

  The question we face is respect for vSphere host - when we start the Wizard "Fix Non compliant vSphere Host" it displays the correct version of the OMSA - 7.4.0.2 but OMSA status is "required update".

  Whe test us the connection to hosts using "Test the connection profile", it hangs at 0% and will be never finished.

  Also in the OpenManage integration in vSphere Client "Frimware" tab option is grayed out.

  Please indicate how we can make this work?

  Concerning

  Milan

  Well, I did some research more and found that ESXI 5.5 U1 and U2 don't are not supported by OMSA right now.

  FTP://FTP.Dell.com/manuals/all-products/esuprt_software/esuprt_virt_solutions/Dell-Mgmt-plugin-for-VMware-Center-2.3_Release%20Notes_en-us.PDF

  ESXi 5.5 U1 and U2 are supported only for the OMIVV on the servers of 12th and 13th generation who are capable of out-of-band management and require no OMSA must be installed on the host system. We intend to add a supported of the OMSA version at a later date.

  Thank you

• Error 2000000 charge Assembly of the OMIVV 3.0 and 6.0 vCenter

  We have recently installed vCenter 6.0 in our laboratory. I downloaded the OVF OMIVV and deployed a new instance of the device. (I experimented with 2.3.0 in the past, but has never run, just so threw it out). The connection to the vCenter took place without a hitch, but the web client shows a dialog "Error 2000000" whenever I click on through the interface. When I used the first Setup Wizard, I was able to enter all of the passwords, but the list of guests was empty, even though this vCenter has 8 fasteners. Without being able to choose a host, I was not allowed to go forward through the wizard.

  It seems that this error has been reported in older versions, but it is slightly different in OMIVV 3.0, so I thought I should start a new thread. It is said:

  An unknown exception has occurred and has been recorded in the extended papers.
  Severity: CRITICAL
  Error: 2000000
  Date and time:
  Details:
  An unknown exception has occurred and has been recorded in the extended papers. If the problem persists, restart your device. If this does not resolve the problem, contact Dell technical support.

  Things I've tried:

  -Enable and disable the web proxy settings (no change of behavior)

  -Unplugged then replugged the vCenter in the administration several times

  -Make sure the vCenter and OMIVV device are on the same network, with no firewall between

  Re-recorded the vCenter using the domain name FULL official, such as name-> digital-> name in same name results returned

  I downloaded the package support and looked through the logs, but do not see anything obvious. I'd be happy to start over and upload files or a clean log file if it would help.

  Tips on where to go from here?

  Joseph Jackson,
  Computer services
  Carnegie Mellon University.

  Hello

  Of course relates to the certificate that changed for personalized certificate.

  Please follow this KB

  vCenter # validation error server certificate in VMware vCenter Site Recovery Manager and other solutions that run on a separate system
  KB.VMware.com/.../2109074

  We are going to redirect to thw KB which depend on your type of (distinct from the PSC or Embedded) infrastructure deployment.

  Now we're working for one of my clients.

  Good day.

• Space free divergence, esxi/vCenter Storage Manager

  This data shows 231GB free in vCenter store and 760 GB free to HDS (see table)

  How can he show more free to HDS in vCenter? Given that HDS does everything by Thin Provisioning?

  I feel that I'm missing something hahaha

  I mentioned to the Compellent support too, the guy had a look and couldn't see quite why and he will discuss with others and get back to me.

  I don't know that it must be something simple that I'm missing?

  

  Using VMDK provisioned end or thick?

  If you have created your virtual machines with thick VMDK, you VMDK which is great in VMware, but will be considered void by the HDS. HDS didn't write zeros and will show the free space.

• Volumes vCenter and VMware virtual multiple servers

  I have a band EQ that allows storage of two vCenters. I have VVols work on vCenter #1, but cannot create vCenter VVOLs #2. I found this general post online and wonder if I can give you only a single container & VVol of total and that's why I can't create my second vCenter VVOLs?

  Today many suppliers do not support a single storage container that includes an array of entire storage.

  Today most of the suppliers are supported unique endpoint of Protocol for the entire storage table.

  vSphere-Land.com/.../Comparing-Virtual-volume-vvol-Limits-to-vmfsnfs-Limits.html

  Please specify the fact that.  I suggest that you open a support case.  May be that the supplier of VASA was not record correctly.

  Don

• How to change the MOB OpenManage integration for vCenter Server registration

  A few months back, I've updated our installation of the vCenter for v2 plugin, now called OpenManage integration for vCenter Server. When you perform the upgrade, we have kept the old base done vs a new installation. During the upgrade process, we deployed the new device under a new name of the computer.

  Everything works well except that we noticed an annoying thing. Registration of the plugin is the former name of the server instead of the name of the new server-oriented. It is validated by looking at the web page MOB: http://vcenter Server/fmt drilling then down through:

  Content--> Extension Manager--> extensionList ["com.dell.plugin.OpenManage_Integration_for_VMware_vCenter"] --> server--> URL string

  The configuration of the appliamnce shows the correct new name of the device and the administration console is accessible via the new name for the device. The only place where we see the old name of the device is in the MOB config.

  We tried to remove the plugin and added, but still cannot change the value of server URL to reflect the new name of the device. Until we solve this problem, I work around the problem by keeping just the DNS entry for the old name of the server in DNS.

  Anyone know who to change the property MOB for the URL of the server?

  I solved the problem.

  I found the following article that shows how to upgrade the extension. I just cut and paste into my current values with the URL of update and now all is good.

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=2060127&sliceId=1&docTypeID=DT_KB_1_1&dialogID=236869583&StateID=0%200%20236885165