Software upgrade - redeem code?

Similar Questions

• Error message: Windows could not open possibly due to a hardware or software upgrade with a black screen and white on Windows XP starts.

  Original title: suddenly Windows XP does not open

  After using the computer someday, he would not start the next time I lit. Windows tried to start but failed and went to a black and white screen saying windows could not open possibly due to a hardware or software upgrade and invites me to try opening windows normally, safe mode, using the last well-known congig, etc... Every choice has ended up doing the same thing, windows tries to start and end up back in the black and white screen.

  Hi Brian,.

  1. you receive messages or error codes?

  2. did you of recent changes on the system?

  You can read the following article and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  Black screen on startup

  Hope this information is useful.

• Please help KB 976370-Upgrade error code-80073701

  Please help KB 976370-Upgrade error code-80073701

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Problems of bluetooth of Q10 Q10 BlackBerry blackBerry since the software upgrade

  I have a BBQ10 and a Sonic Chevrolet with mylink. They have paired up to this Monday night everything has worked very well, and then I had a software upgrade on my BlackBerry. It installed just fine no problems there. Now when I try to make/receive calls while using bluetooth in the car my phone must be using speakers. Handset does not work, nor does the bluetooth. The first time I start the car upward and the pair of devices that I can get the bluetooth to ask me ' what u want to do' I can get all the way to connect the call. As soon as the call is connected it tells me that it is private mode. This is the point where only the speaker on the phone itself will work. I can't talk via bluetooth or "combined" speaker only or I can't hear people, but they hear me. I know that's not a problem with the mylink by car I've matched my MOM to "BOLD" and everything works as it should. Suggestions?

  Problem solved. Name of the phone has changed. Deleted the pairing between the phone and turned car restarted bluetooth phone car and turn it back on. Repair cameras and seems to be fine now

• How to keep the content of persistStore after the software upgrade?

  I use persistObject to store a variable in the program, once I changed some work and update the new version of the device, I found that the historical data are passed. How to store history data after the software upgrade? my software is auto-start at the start of the unit, in order to update you have to restart the device.

  If the size of the object you store changes, and then it gets deleted.

  If you change the name of the package where you saved the object, then it will fade.

  I usually have with ropes to keep them always upgrades throughout.

• BlackBerry Z10 problems after the software upgrade

  After the software upgrade on my z10 I not receive notification for my text, whatsup and other notifications in my hub. Pls help

  I would try to reset your Hub first.

  Open the Hub and from the upper right corner, with the fingers sliding down to the center of the screen five times.

  You will see quick white screen, then a black screen with the text that the hub is set to zero.

  If after a day which not resolves your notifications, remove the twitter account of your settings > accounts, restart the BlackBerry, and add the new account.

• problems with rv042g after the software upgrade

  After the software upgrade it reboot the router on every 45 seconds

  I tried this tool from Cisco RV0xxV3_FirmwareRescueUtility_v4.0.0.7 Web site without success, the problem is there, is one way that you can get the router up and running again?

  Can I run a TFTP server and download new software, or I ther a FirmwareRescueUtility for rv042g?

  Mogens Demmark

  The first firmware comes with RV042G is 4.2.0.03, so the firmware utility rescue v4.0.0.7 would not work.

  Given that your will to power cycle automatically RV042G every 45 seconds, and the problem has not disappeared after that you did a reset to factory default, the unit needs a new firmware downloaded. Please, try the following steps.

  1. disconnect the power cable to the unit.

  2. hold the reset (using a paperclip) button, while plugging in the power cable.

  3 look at the DIAG LEDS.

  4. release the reset button when you see the DIAG led are flashing.

  5. a flashing DIAG indicates that the unit runs in start mode, and a server tftp on the device is waiting for a picture of fresh firmware to the address 192.168.1.1.

  6. set up your PC with an IP address in the subnet 192.168.1.x, e.g. 192.168.1.100 and specify as default gateway 192.168.1.1.

  7. try to ping the unit with 192.168.1.1, and you should see a response from the unit.

  8. run a program client tftp (with a command line) and push an image good firmware, for example

  TFTP-I 192.168.1.1

  If the procedure above does not resolve the problem, contact the support center for RMA.

• Smartphones blackBerry device software upgrade

  Software upgrade system could be installed on my computer, but apparently something wrong with the Desktop Manager. He doesn't want to upgrade. Once earlier I was able to update via the Desktop Manager but lately it seems that something has gone wrong with it. Can someone help me? Thank you very much.

  If you have installed the software of another carrier, you need to delete the vendor.xml file located in "C:\Program Files Research In Motion\AppLoader.

• BlackBerry Smartphones Software Upgrade

  Please I will like to know if there is any software upgrade for smartphones Blackberry 9700 and how do the upgrade if available!
  Thank you!!

  Very well!
  It will give a shot!
  Thanks for the help!

• I used ny redeem code and it worked but its still saying my subscription has expired. The new plan is on my page and my old plan should I trade sort who is active?

  I used ny redeem code and it worked but its still saying my subscription has expired. The new plan is on my page and my old plan that I have Exchange somehow it is turned on

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -If you have more than one email, but of course you use linked to your subscription

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

• I have problem install photoshop5.5 and 6.0 software upgraded. The software, check error error message a future version of photoshop or ImageReady qualification has not been detected.   Please try again or cancel the installation if you have valid c

  I have problem install photoshop5.5 and 6.0 software upgraded. The software, future error message

  Error checking version of photoshop or ImageReady qualification has not been detected.   Please try again or cancel the installation if you have a valid copy of photoshop or ImReady that was detected.   Please call Adobe Customer Service.    . Someone help me please

  Phillip winter

  If I'm just remember, you need to enter your serial number of photoshop 5.5 when you install the upgrade photoshop version 6.

  The number that is on the upgrade to photoshop registration card 6 does not work for the installation of an update to photoshop version 6.

• Smartphones blackBerry device software upgrade problem

  Hi all

  I have a Blackberry 8310. He was originally AT & T service, but he now has the T-Mobile. It is unlocked and currently leads the software 4.2.2.170.

  I'm moving to 4.5. I downloaded the software from T-mobile, here for the 8320. They have no 8310 software, and told me that it shouldn't make a difference:

  http://www.t-mobile.com/bbupgrade/

  I followed the instructions here:

  http://www.BlackBerryFAQ.com/index.php/How_do_I_upgrade_the_OS_on_my_BlackBerry%3F

  (I tried method 1 and method 2)

  However, it will not install little matter what I do. I even tried using CrackMem.

  Get to step 6 of method 2 for example, I'm never invited to install the upgrade. When I look into the application loader on BB Desktop under applications to update or install new applications, the software update is never there.

  No idea why the upgrade won't install? Is it because the phone's ex - AT & T?

  One last thing - it was originally hooked up to BES and so had a top COMPUTER policy. I wiped by using method 2 here:

  http://www.BlackBerryFAQ.com/index.php/Remove_IT_Policy

  Any help would be appreciated.

  Hi and welcome to the forums!

  One that you said that the software and the model doesn't matter, said you bad.

  Well, software loading 8320 in to a 8310 photo an accident of room StarTrek carrier... same results.

  Go to the AT & T software download site and get the right device OS for the 8310.

  When you go to install it, you need to remove the provider. XML file. This step is listed in your procedure

  I have the number of site and the version to download for you at the bottom of the post.

  When you start the download of software peripheral BONES of AT & T, save the file to disk, do not run.

  When the download is complete, then go to the directory on the PC you have loaded to and run the

  self-extracting file. The software will be installed in the directories in the files of the Office Manager

  If the application loader will find it.

  Follow each step exactly as written now from the first step of the procedure of FAQ.

  Thank you

  Bifocals

  https://www.BlackBerry.com/downloads/entry.do?code=577BCC914F9E55D5E4E4F82F9F00E7D4

  BlackBerry Handheld Software v4.5.0.152 (Multilingual)
  Package Version: 4.5.0.152
  Composed of:

  • Applications: 4.5.0.110
  • Software platform: 2.7.0.90
  • File name: 8310M_PBr4.5.0_rel152_PL2.7.0.90_A4.5.0.110_AT & T .exe
  • File size: 89,91 MB

• 4400 wlc 4.2.176 to 4.2.205 software upgrade

  Hello

  I have 4400 wlc and image backup running as 4.0.206.0 and 4.2.176. Because of certain reservations in the current 4.2.176, we expect to update with 4.2.205.

  WLC >

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 cm 5.4pt cm 0 5.4pt ; mso-para-margin : 0 cm ; mso-para-marge-bottom : .0001pt ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;} Main boot image... Code 4.2.176.0 (active)
  Backup boot image... Code 4.0.206.0

  I have here are doubts before moving to upgrdation:

  I have it here's the image that has been downloaded from the site of cisco

  Air-WLC4400-K9-4-2-205-0.AES (38 MB file approx.)

  1, but I could see a single file over in the cisco site, which is AIR-WLC4400-K9-4-2-205-0-ER.aes (file 4 MB approx.). I put in the root directory of the TFTP?

  is it necessary to copy the mentioned so 4 MB file?

  2 as show images of starting backup as a 4.0.206.0, what will happen to this file, if I'm upgrading to 4.2.205

  Is what is in the wlc as a backup image?

  3. are there additional things are needed during the upgrade from 4.2.176 to 4.2.205?

  Please suggest me before moving on the same...

  It would be appreciated.

  Hello

  answer your questions:

  1, but I could see a single file over in the cisco site, which is AIR-WLC4400-K9-4-2-205-0-ER.aes (file 4 MB approx.). I put in the root directory of the TFTP?

  is it necessary to copy the mentioned so 4 MB file?

  the 4 MB file (which has ER), is the file of the boot loader.

  It is not necessary to apply it, but it is recommended that you also upgrade to this boot loader after the WLC image upgrade. (as mentioned in the release notes)

  http://www.Cisco.com/en/us/partner/docs/wireless/controller/release/notes/crn42205D3MR4.html

  .Aes ER files are independent of controller software files. You can run any controller software file with any file from ER.aes. However, to install the latest software startup file (4.2.205.0 ER.aes) ensures that changes made to the boot software in all files of the boot software ER.aes past and present are installed.

  -Do not install the 4.2.205.0 software controller file and the startup file software at the same time ER.aes 4.2.205.0. Install a single file and restart the controller; install the other file, and then restart the controller.

  2 as show images of starting backup as a 4.0.206.0, what will happen to this file, if I'm upgrading to 4.2.205

  Is what is in the wlc as a backup image?

  Yes, he'll stay there as backup image.if you want to change it, you must interrupt the boot on console (ESC) process, start the secondary image and do the upgrade again to the secondary image.

  3. are there additional things are needed during the upgrade from 4.2.176 to 4.2.205?

  no extra steps, don't just make sure you use good TFTP as (TFTPD32)

  Here are the release notes for 4.2.205 for your information...

  http://www.Cisco.com/en/us/partner/docs/wireless/controller/release/notes/crn42205D3MR4.html

  Kind regards

  Talal

  =========
  Please note the answers that you find useful and mark as answer - when is it :-) - so that others can easily find

• 3005: upgrade the code to the 4.0.1 3.6.7.D

  current software/boot code:

  Bootcode Rev: Version 2.5.Rel June 21, 2000 18:57:52

  Software version Rev: 3.6.7.D April 3, 2003 12:56:29

  I put the startup code to v4.0 before upgrading the software? If so, what are the measures? Please notify.

  No, the startup code should never need to be upgraded. We have 3000 running in the lab here with old boot code Altiga 1.1 on them, running the 4.0 software.

• Why is my Apple remote desktop not send software upgrades as it should?

  Apple Remote Desktop Help?

  In apple remote desktop there is command-line unix where I can send the command softwareupdate - install - all, and I do as user root on an administrator account. My problem arises when I send the software update and ARD never Specifies if yes or no updates have been installed successfully, it just says: Update software tool. I know that it is not to install the update either, because when I look at computers I see pending updates. I'm new to the apple support and appreciate any help in this matter. Thank you

  have you tried:

  Send the command as root

  the "softwareupdate d-i - a" command?

  Try issuing the command to one computer at a time. If you issue it to 100 computers. Your network can choke on the bandwidth required to download all the updates to those. Keep in mind that softwareupdate is for upgrades of the OS; It will not install the updates of pages or other app store apps.

  If the command works, you'll probably want to restart the computer. If everything is working properly.