Migrate data every upgrade since OS9, should I perform a clean installation of El Capitan?

Similar Questions

• My 2 TB TC is full and will not back up. Yet, I have only 1 TB of data on my laptop. Note that I've reformatted the laptop since the last backup with a clean installation of El Capitan.

  My 2 TB Time Capsule is full and will not save. Yet, I have only 1 TB of data on my laptop. Note that I've reformatted the laptop since the last backup with a clean installation of El Capitan.

  I bought a 2 TB external hard and have used Time Machine to back up. But I also use my time Capsule, which I save wireless.

  Any suggestions on getting my TC back up?

  One suggestion would be to copy all existing backups that are now on the Time Capsule 2 TB hard disk. Then, clear the TC and start over again with new backups.

  A more expensive option... assuming you want to keep all old backups on the TC... would be to add a new TC and start backups goes in this direction.

  Another option... If you do not need to keep all old backups now on the TC... would be to erase the TC and start over again with new backups. The benefit of doing this would be that no new material will be necessary, but the downside would be that you lose your old backup history.

• I have an ISO of Windows 7 instsaller file. Can I use it to upgrade a machine as opposed to a CLEAN INSTALLATION of Vista?

  Upgrade Windows Vista to Windows 7

  I have an ISO of Windows 7 instsaller file. Can I use it to upgrade a machine as opposed to a CLEAN INSTALLATION of Vista? In other words, the Windows 7 ISO disc gives an option to upgrade only?

  Hello

  read this tutorial

  How to do a upgrade install Inplace of Vista to Windows 7

  http://www.SevenForums.com/tutorials/1818-upgrade-install-Windows-7-a.html

  _____________________________________________________________

  and the link below is to an instance of installation of Windows 7 for any other questions about the installation of Windows 7

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

• Should which driver I perform a clean installation of Win 7?

  I want to do a fresh install of Win7 using a win7 disc I have.
  Need to find the number of WIn7 first, but will have a look later.

  What I need to know, is what drivers do I need? I'll put them on a USB stick before wiping the hard drives. Are there useful to have Toshiba's useful things? Only purchased yesterday and not impressed so will start from scratch without a lot of the junk. I don't want to get half way through so and it will not work and end up with a useless laptop.

  Popular tips

  Edit: think also to pass an ssd hard drive of a pc that I rarely use and what to put here. no problem this?

  Post edited by: will_s

  > What I need to know, is what drivers do I need?

  First of all you should always put your laptop model because it is essential info.

  In General, you need essential as drivers: Wlan, LAN, chipset, display, touchpad, etc.
  Also I recommend that you install the VAP (value added package) that is needed to be able to control the FN and multimedia keys.

  On the European driver Toshiba page, you will find details about monkey tools in the more information column

• I'll be able to perform a clean install of Windows 7 (Vista Upgrade Option)?

  I was wondering if I would be able to perform a clean installation of Windows 7 with "upgrade drive" we are is sent when Windows 7 is released October 22, 2009. I had read that we will be able to upgrade the sense we will keep all our old stuff, however I just want to perform a clean install without all the garbage that comes preloaded on the computer when you buy it.

  Yes, you will be able to clean install with upgrade disc. Generally, everything you had will go into a folder named windows.old, if you have backed up everything you can delete this folder but if not only get what you need, then delete. This issue will take place. The folder contains all the files you had, the programs, but you can not open them or he'll tell program not found and the files of vista or xp. I hope this helps. Just at the moment where you see the menu level or custom installation, click Custom install and who should be the ability to clean the facility.                  OS: Windows 7 Professional. PC: HP DV4t.

• install Oracle 12 c and migrate data from 9i to 12 c on Solaris

  HI: this is a primary control to check IAM step by step.  I need to migrate the server Oracle 9i (Solaris) to 12 c (Solaris) to the customer request. I have the instruction of installation YES from the team, the draft plan is:

  1. install Oracle 12 c binary on Solaris Server

  2 exp/imp, method to move data to 12 c 9i.

  Should I create a database "empty" by script until I use the exp/imp method to migrate data from 9i?  Or, is it better to use the option 'create the single database instance' in YES during the installation of 12 c, then exp/imp?  How about the "plug-in database" or the "CBD/PDB' concept to 12 c?  It's still new and I am not master familiar with it, that I have to use all "CBD/PDB' 12 c or not?

  Any problem that I need to know?

  Thank you very much!

  You have your point of disagreement, but it is the best approach of guys Upgrade Oracle, google for Mike Dietrich blogs on updates. And your concern that make upgrades does not allow you to practice, well, you could easily make a few tests on my upgrade on a test environment, I really don't agree with your point here...

  Sorry - but I agree with the ground.

  Anyone who still uses 9i has some questions SERIOUS architecture dealing with totally outside the DB and data. There is just too much features auxiliary available (e.g., ASM, GRID, EM) which did NOT exist in 9i or substantially changed.

  It is also a non-starter, IMHO, not to recommend as an upgrade to 11g without even knowing the 9i version that uses OP. A direct upgrade to 11g is NOT possible since the first versions of 9i. So if such a version uses OP they couldn't make a direct upgrade anyway. They will need first to upgrade to the last version 9i and then level it to 11g. Then, they should adapt to 12 c.

  Then you must take account of the need for BACKUP:

  1. PRIOR to starting to do something

  2. AFTER the upgrade to 9.2.04

  3. AFTER the upgrade to 11 g

  4. AFTER the upgrade to 12 c

  Compare that to the approach of that ground is recommended to use export/import. There is NO need to save the source DB at all since the process will NOT change. Simply a backup after upgrading to 12 c.

• try to migrate data from a macbook pro to another using thunderbolt cable.  Cable is not recognized, why?

  replace a 3 years old macbook pro with a new - try to migrate data using thunderbolt cable.  When the cable is plugged into laptops, its not known how to fix this?

  The two Macs have a Thunderbolt port?  The old Mac may have a mini displayport that is used for video only, but accepts a Thunderbolt since video Jack mini displayport is a subset of Thunderbolt.

  In addition, you use a bolt of lightning and not a cable mini displayport? They look alike at first sight, but Thunderbolt should have an icon of lightning on each card.

  Also, if you look in System profiler

  OS X: about system information and System Profiler - Apple Support

  under lightning shows as being connected?

• Need assistance to migrate data from XML to oracle table.

  Hey Odie,

  Im trying to insert data from an xml file into a table.

  My XML file is as follows.

  <? XML version = "1.0" encoding = "UTF-8" standalone = 'yes' ?>

  - < TransferXML >

  < BatchName > HJ69240 < / BatchName >

  < BatchStatus > Park < / BatchStatus >

  - < SubBatch >

  < SubBatchName > UQ80288 < / SubBatchName >

  < SubBatchStatus > project < / SubBatchStatus >

  - < SubBatchDetail >

  < Ingredient > I3308 < / > of theingredient

  < DispensedQty > 0,0 < / DispensedQty >

  < MDispensedQty > 4.0 < / MDispensedQty >

  < / SubBatchDetail >

  - < SubBatchDetail >

  < Ingredient > I3261 < / > of theingredient

  < DispensedQty > 0,0 < / DispensedQty >

  < MDispensedQty > 3.5 < / MDispensedQty >

  < / SubBatchDetail >

  - < SubBatchDetail >

  < Ingredient > I3235 < / > of theingredient

  < DispensedQty > 0,0 < / DispensedQty >

  < MDispensedQty > 0,5 < / MDispensedQty >

  < / SubBatchDetail >

  - < SubBatchDetail >

  < Ingredient > I3142 < / > of theingredient

  < DispensedQty > 0,0 < / DispensedQty >

  < MDispensedQty > 0,2 < / MDispensedQty >

  < / SubBatchDetail >

  </SubBatch>

  - < SubBatch >

  < SubBatchName > ZB97913 < / SubBatchName >

  < SubBatchStatus > incomplete < / SubBatchStatus >

  - < SubBatchDetail >

  < Ingredient > I3309 < / > of theingredient

  < DispensedQty > 0,75 < / DispensedQty >

  < MDispensedQty > 0,0 < / MDispensedQty >

  < / SubBatchDetail >

  - < SubBatchDetail >

  < Ingredient > I3436 < / > of theingredient

  < DispensedQty > 0,0 < / DispensedQty >

  < MDispensedQty > 0,05 < / MDispensedQty >

  < / SubBatchDetail >

  </SubBatch>

  <Final>false</Final>

  < / TransferXML >

  
  

  
  

  With the help of your previous posts I've migrated data from this xml file in a table that works perfectly well. But these data repeats instead of giving 6 lines that his return 12 lines guide please.

  
  

  CREATE TABLE XXBATCH AS

  SELECT A.BatchName, A.BatchStatus, B.SubBatchName, B.SubBatchStatus, C.Ingredient, C.DispensedQty, C.MDispensedQty, A.FINAL

  OF (XMLTable ('/ TransferXML'))

  from xmltype)

  BFILENAME('APPS_DATA_FILE_DIR','HJ69240.) XML')

  nls_charset_id ('AL32UTF8')

  ) COLUMNS

  BatchName VARCHAR2 path (99) "BatchName.

  , Path of the BatchStatus VARCHAR2 (999) "BatchStatus.

  Path VARCHAR2 (99) final 'Final')),

  (XMLTable ('/ TransferXML/SubBatch '))

  from xmltype)

  BFILENAME('APPS_DATA_FILE_DIR','HJ69240.) XML')

  nls_charset_id ('AL32UTF8')

  ) COLUMNS

  Path of SubBatchName VARCHAR2 (99) "SubBatch/SubBatchName".

  , Path of the SubBatchStatus VARCHAR2 (99) "SubBatch/SubBatchStatus".

  (B)

  (XMLTable ('/ TransferXML/SubBatch/SubBatchDetail '))

  from xmltype)

  BFILENAME('APPS_DATA_FILE_DIR','HJ69240.) XML')

  nls_charset_id ('AL32UTF8')

  ) COLUMNS

  Path of the ingredient VARCHAR2 (99) SubBatchDetail/ingredient"."

  , Path of the DispensedQty VARCHAR2 (99) "SubBatchDetail/DispensedQty".

  , Path of the MDispensedQty VARCHAR2 (99) "SubBatchDetail/MDispensedQty".

  (C)

  I didn't test your query, but apparently it's because you have access to the same file three times instead of spend one XMLTable to another correlated nested groups.

  Better, this should work:

  SELECT A.BatchName

  A.BatchStatus

  B.SubBatchName

  B.SubBatchStatus

  C.Ingredient

  C.DispensedQty

  C.MDispensedQty

  A.FINAL

  FROM XMLTable ('/ TransferXML')

  PASSAGE xmltype (bfilename('TEST_DIR','HJ69240.xml'), nls_charset_id ('AL32UTF8'))

  Path of COLUMNS BatchName VARCHAR2 (99) "BatchName.

  , Path of the BatchStatus VARCHAR2 (999) "BatchStatus.

  , Path VARCHAR2 (99) final "Final."

  , Path of XMLTYPE «SubBatch» SubBatchList

  ) AT

  , XMLTable ('/ SubBatch')

  PASSAGE SubBatchList

  Path of COLUMNS SubBatchName VARCHAR2 (99) "SubBatchName".

  , Path of the SubBatchStatus VARCHAR2 (99) "SubBatchStatus".

  , Path of XMLTYPE «SubBatchDetail» SubBatchDetailList

  ) B

  , XMLTable ('/ SubBatchDetail')

  PASSAGE SubBatchDetailList

  Path VARCHAR2 (99) ingredient of COLUMNS "Ingredient."

  , Path of the DispensedQty VARCHAR2 (99) "DispensedQty".

  , Path of the MDispensedQty VARCHAR2 (99) "MDispensedQty".

  ) C

  ;

  Post edited by: odie_63

• How only migrate data between SQL Server 2008 Oracle 11?

  According to our requirement, we only have to migrate data from a SQL Server database to an existence
  Oracle database user.
  (1) I tried to do with the wizard of Migration SQL Developer 3.0.04, but find a problem.
  My SQL Server database name is SCDS41P2 and my Oracle database user name is CDS41P2;
  When I used SQL Developer move offline data by the Migration Wizard, I found all the oracle user
  name in movedata files who obtained by running the Migration Wizard
  is dbo_SCDS41P2. If the Oracle user name is not the same as my Oracle username existed.
  the data cannot be moved to my user Oracle existed when I run oracle_ctl.bat in the command line window.
  So I had to change the Oracle username in all the movedata files, but it is difficult to change because there are a lot of tables in
  databases. So could you please tell me how to get the movedata files which is the name of user oracle in them my
  WHEREAS Oracle user name?
  
  (2) I also tried to use the "copy to Oracle" to copy the data to SQL Server database tables
  the user database was Oracle. When you click on 'copy to Oracle', I selected the option 'Include data' and 'replace '.
  But I found some tables cannot be copied, the error info is as below:
  SPSSCMOR_CONTROLTABLE table failed. Message: ORA-00955: name is already used by an existing object
  
  Could you please tell me how to deal with this kind of mistake?
  
  Thank you!
  
  Published by: 870587 on July 6, 2011 02:57

  Hello
  After following with development the following should work too-

  1 use the migration option to capture and convert the SQL * database server
  2. go in SQL * Developer and remove the converted model.
  3. click on the captured model and choose 'convert '.
  4. click Next and you should get a screen with 2 options - "Data Type Mapping" and "Object Naming.
  5. choose "Object Naming" and scroll down the list until you see the name of the user who will be transformed. For example, in my test, I got the names scott_test and dbo_test - where the owners are 'scott' and 'dba' and 'test' was the name of the database.
  6. change the name of oner_database to just owner - scott_test to scott
  7 complete the conversion process and the owners must be created without the name of the database.
  8. you should now be able to generate the SQL * scripts of charger with only the name of the owner in the CTL files.

  Please try this and let us know if it works for you.

  Kind regards
  Mike

• What is the best strategy to migrate data from Windows to one Mac to another? I use Parallels Desktop to run Windows on my current Mac but want to use Bootcamp on my new.

  What is the best strategy to migrate data from Windows to one Mac to another? I use Parallels Desktop to run Windows on my current Mac but want to use Bootcamp on my new.

  If it is only the data (not apps) I use Dropbox. It turned out to be the best way to move things between the side Mac and the bootcamped Windows of my iMac side. I don't see why it would not work to move data from a virtual machine installation of Win to a BootCamp installation.

• Recording of data every hour, labview stops responding when the program stopped

  Hello. I'm doing a labview program to read the data and recording to a PDM file every hour for as long as it runs. First of all, I wanted to test it on every 15 minutes to work the bugs how. I made the attached VI and simulated data. It works fine but when I press the stop button to stop the program, the mouse cursor becomes the "wait cursor" and it remains like that until the program says "(ne répond pas) ' and then it crashes." Needless to say that the data is not recorded or corrupt. Do not do this with shorter time intervals (say, record data every 15 seconds). Is the long time period why its happening? Is there a better way to address the issue? Thank you!

  
  

• I need my Vi to save only one point of data every 30 seconds

  Hello

  I have trouble getting my VI to make only one point of data every 30 seconds. I collect a couple and the temperature. If you take a look at the queue of lvm, you will see that I have two data points every 30 seconds. I want only the VI to take one. I can do this by going to the DAQ assistant and change the mode of acquisition of N samples 1-sample (on request), but if I do this I am not able to see my couple of graph in real time.  In addition the VI takes data about every 30 seconds. Is there a way I can strengthen this also?

  1. change your graph of couple to be a graph.  A graph has a history associated with him, so he keeps old values in a circular buffer for you.  A chart shows just the last thing written in it.

  2. change your sample of Compression to be 64.  It is currently set at 30, which means that you will end up with 2 samples in your data.  That's why you write 2 samples when write you it.

• is this a correct way to write data every time the loop is executed?

  I created a VI, and my goal is to save data every time the loop is executed. So far, I only learned to write binary file... I wish I could write numeric value directly...

  The only problem is that I am not if my method is correct, because I'm afraid that each time that the loop is executed, the previous binary data will be replaced... I don't want that occur.

  Do you think that my logic is appropriate in what concerns the registration data?

  Thank you!

  Your logic is fine. You replace data because the file pointer will be that your data is written. If your program stops, and then you restart, and you want the data to add to the file, you can use the file value position VI and the pointer value 0 bytes of the end. set this position once, after you open the file (so out of the loop) and then data will be added.

  If what you mean by "write a number directly," is to write something in a human newsfeeds format, you can use writing to text file instead of writing to a binary file. Then, use the VI format string or fractional number string VI to convert your double into a string and write it.

• need to record the data every second

  Hello

  So far so good with writing this simple .vi. I just have a problem. I need to record data every second. I use FieldPoint for thermocouple output signals. MAX is reading everything very well (I'm ambient recording, it is fondant between 80-83, so I put my stop for 83) and I can usually run the program for 5-10 seconds before my structure case is set to false and stops the .vi. When I open the file, I get data decimated. I tried a delay time and always the same. Not only she is decimated, but it does not record every second but between 5 to 10 seconds.

  How can I fix?

  .VI attached as well as the data element

  Thank you very much

  
  

• I'm trying to migrate data from a server to a new one with the file permissions of the files of users and records lost.

  original title: robocopy

  I'm trying to migrate data from a server to a new one with the file permissions of the files of users and records lost. So far, that's what I did, I used \\server1\share \\server2\share/sec /mir robocopy and robocopy \\server1\share \\serve2\share/e/s /copyall. It seams like they copied all files with the permissions of the user for the files, but not files. For example, if a user makes a folder with the files in the folder appear them have permissions appropriate for them but not the root folder or subfolders, they did... How can I fix this and what is the difference between / s /mir and/e/s /copyall?

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/