need to record the data every second

Similar Questions

• Windows Millenium every time I start it needed the date every time

  whenever I start need to put the date and time on it

  Hi Alexander,.

  Unfortunately, Windows Millennium Edition has reached end of support:

  http://www.Microsoft.com/Windows/support/endofsupport.mspx

• Tecra M5 does not record the date and time - battery RTC or CMOS checksum is inconsistent

  My Tecra M5 PTM50E reverend new does not record the date and time. I loaded RTC battery for 8 hours when electricity is on in the said user's manual. I don't know where is the problem. The BIOS settings are respect after power is on.

  When I change any value in the BIOS, the changes are saved properly but date & time system restored to their value 01/01/2000, 00:00 every time when I get out of turning off more of 2-3 min. Message "RTC battery is low or CMOS checksum is inconsistent.

  Press [F1] to set Date/time"does not appear when I power on the computer. Any suggestions?

  Hi guys

  Usually this problem appears only if the CMOS (real time clock) battery is empty or corrupted.
  The real time clock battery powers the internal clock in real time and calendar. It also maintains the system configuration. If the RTC battery is completely discharged, the system loses these data and the real-time clock. In this case, the message RTC battery is low or CMOS checksum is inconsistent appears.

  So I see only two possibilities:
  Either you will charge the battery for real-time clock, or you ask the technician for replacement.

  Generally, the battery must be completely charged after 8-9 hoers but try to connect the laptop to the power adapter for a long time.
  If it will not help solve the problem if you contact the ASP for the RTC battery replacement.

• Need to reset the date and time

  My system has decided that it is Jan.4th 2004 and everytime I turn it on, I need to reset the date and time. How can I cure this?

  Packard Bell's Web site does not recognize the 'ALT' CO2 as a model.  Despite this, however, PB seems only to provide a 'generic user guide"which is not described the replacement of the motherboard or the battery at all.  In fact, the only thing he has to say about batteries is be careful how get rid you of them.

  Your computer is a laptop or Desktop/Tower computer?

  If you have a desktop/Tower computer, you can look here--> http://www.uktsupport.co.uk/pb/mb/pbmb.htm and see if you can identify the motherboard used in your computer.

  However, if you have a desktop/Tower computer, the best thing to do is to unplug your computer from the network and, taking the precautions perfectly static electricity, open the box and inspect the motherboard yourself.

  A newish mother on the above site, http://www.uktsupport.co.uk/pb/mb/cosmos.htm, shows the battery on the center line vertical and more to the left.  It's just below the 3 PCI slots.  If you have something like that, a Visual inspection should be enough to see how to remove it.  The type of battery will be engraved on the top of the battery.  In the photo, it looks like a model CR-2032, but there are several models of battery on this size.  Battery CR-2032 (or equivalent) is available in almost every pharmacy chain in the United States as well as online and stores like Radio Shack.

  The page for an old motherboard, http://www.uktsupport.co.uk/pb/mb/450.htm, indicates that the battery is a '3.0V DC Lithium soldered to the motherboard"and if that were the case, it would probably be something that you wouldn't do yourself.  However, this thread is to think that all you have to do for this particular mobo is actually finding the right type of support plug-and - battery.

  If you have a laptop, things can get quite a bit more difficult.  If you can find a different model for your computer name, you may be able to find the manual here--> http://tim.id.au/laptops/packardbell/ , but some of these manuals can not explain clearly how to get to the CMOS battery.

• my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  HI - try the following steps:

  On your iPhone close application of activity and also, if it runs in the background, the health app (you can close open apps, including the app shows):

  -Double-click the Home button, and then drag upward on each of the app previews to close.

  It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

  If this does not resolve the problem, try next disconnect and rematching of your watch:

  -L'app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.

  -Choose to restore the watch (backup restore) when provided the opportunity during the whole.

  -Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

  - Pairing your Apple Watch and Support Apple - iPhone

  - Set up your Apple Watch - Apple Support

• Could not initialize and I need to recover the data on the hard drive.

  Original title: computer MOM will not start and I need to recover the data on the hard drive.

  It's an old computer and I do not know what version of Windows it was running.  I guess I need a bootdisk of exploitation, but where can I download that?  Or would it be easier to pull and make a secondary drive in my computer that I just replaced?  It works under Windows XP.

  Hello

  If the old system does not start could be the hard drive. Put the hard drive in another computer as a 2nd drive and then access the files. If you use a computer XP, Vista or Windows 7, you should be able to access the files, unless the drive has failed.

  You can save your files by putting the drive in another computer as a 2nd drive (better) or a USB external drive case and then save up to removable media such as CD, DVD or other USB drives. Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data. (This will not work if the hard disk is defective or other issues preventing the system from booting from the CD/DVD drive.)

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  Hello

  Let us perform the steps below and check out them.

  a. click "Start," "Control Panel", then "Add or Remove Programs". In the box "Currently installed programs", find the name of your wireless router. Click on the name of the software, and then click 'remove '. Click 'Yes' when prompted to confirm.
  b. click "Start" then "run". Type "Services.msc" and click "OK". Select 'Wireless Zero Configuration'. Click on 'start '.
  c. click 'Action', 'properties '. In the drop-down menu "Startup Type", click on the arrow and select 'Automatic' to assign the commissioning of automatic Wireless Auto Configuration. Click on 'OK '.
  d. restart your computer.
  e. right click on "Wireless connections" icon Select "View available wireless connections." Click on "change the order of preferred networks. Select the name of your network, and then click "Properties". Erase the old key and enter a new. Click the checkbox next to "Automatically use that key." Click on 'OK '.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I need to allow the data controllers audio multi media that I need to find out how to access services running on your computer, I need to allow for this program and also Windows media center point final

  I need to allow the data controllers audio multi media that I need to know how to get to ser

  I need services running on your computer allow this program and also Windows media center point final. OK here is the problem have no sound on my computer, it says drivers are not installed, it indicates one or more programs need to be activated. It is said window media center end point should be activated. It is said he can not activate because no driver I have download the drivers yesterday and he always says the same thing, I have problems in trying to solve this problem, but don't know how I need help ok it tells me that there is no driver for my multimedia audio controllers. I have download then and he says the same thing, he repeats to me also to activate the multimedia audio controllers, I need to know how to get to the program that has all the services of the computer, so I can allow these things that need to be activated I do not know how attend you this program thank you for your help.

  The following articles can help me.

  http://www.ehow.com/how_6533261_install-multimedia-audio-controller.html

  http://www.TomsHardware.com/Forum/57964-3-enable-multimedia-audio-controller

• need to update the date of the end of the user using the API of the IOM

  We have a requirement where we need to update the date of the end of the user. The details of the user as usr_key, number of days to extend (such as 30 days or 60 days), and affects manager is provided by SOA (maybe by BPEL). In the java class, I need to add the number of days of the closing date of the user and then update the table of the usr by IOM API method - usrMap.put ("USR_END_DATE", updatedEndDate);
  
  I wrote a small program, but it has erros. Please help me in this situation.
  ' public boolean updateEnddate (String usrKey, String managerKey, String NombreJours) {}
  Boolean result = false;
  String NombreJours;
  int totalNumUsers = 0;
  HashMap usrMap = new HashMap();
  usrMap.put ("Users.Key", usrKey);
  usrMap.put ("USR_MANAGER_KEY", managerKey);
  try {}
  DateFormat sdfSource = new SimpleDateFormat("yyyy-MM-dd");
  Date date = sdfSource.parse("USR_END_DATE");
  SimpleDateFormat sdfDestination = new SimpleDateFormat("dd-MMM-yyyy");
  String userEndDate = sdfDestination.format (date);
  tcResultSet = this.usrIntf.findUsers (usrMap) users;
  totalNumUsers = usersList.getRowCount ();
  If (totalNumUsers > 0)
  for (int i = 0; i < totalNumUsers; i ++) {}
  usersList.goToRow (i);
  updatedEndDate = userEndDate + NombreJours;
  usrMap.put ("USR_END_DATE", updatedEndDate);
  this.usrIntf.updateUser (users, usrMap);
  result = true;
  }
  on the other
  result = true;
  }
  
  
  
  
  Thank you
  Kalpana.

  Calculate the new date

  /**
  * This method is used to obtain the new date after adding x-days
  @param strDate - date today
  @param daysToAdd - x-days
  * @return Nouvelle_date - date after the addition of x days
  */
  private String incrementDate (Date strDate, int daysToAdd) {}
  Start date
  Logger.info("NotifyLastDayOfService::incrementDate(): entrez»);
  SimpleDateFormat sdf = new SimpleDateFormat ("yyyy-MM-DD 00:00:00");
  Dim str As String = sdf.format (strDate);
  Calendar c = Calendar.GetInstance ();
  try {}
  c.setTime (sdf.parse (str));
  } catch (ParseException exception) e {}
  e.printStackTrace ();
  }
  c.Add (Calendar.DATE, daysToAdd); number of days to add
  String PROMOTIONDate = sdf.format (c.getTime ());
  System.out.println ("calculated End Date:" + PROMOTIONDate);
  Logger.info("NotifyLastDayOfService::incrementDate(): sortie»);
  return Nouvelle_date;
  }

  This should solve your problem :)

• SQL queries for reports help: need to reverse the data in the column in columns [O

  Hi all
  
  I'm looking for help in writing SQL, where I need to reverse the data in the columns column.
  
  My data in DB is as below.
  
  VALUE OF NAME OF MONTH
  Jan-10 M1 5
  Jan-10 M2 8
  Jan-10 M3 9
  Feb-10 M1 4
  Feb-10 M2 6
  Feb-10 M3 2
  M4 10 Feb 10
  M1 10 Mar 21
  Mar-10 M2 6
  
  Power required for the declaration will be like:
  
  
  MONTHS M1 M2 M3 M4
  Jan-10 5 8 9
  Feb-10 4 6 2 10
  21 Mar-10 6
  
  How can I do this using SQL. [ORACLE 10g]?
  
  I can make use of server Oracle BI also.
  
  Please help me on this...

  I think this is wrong forum to ask this question. You want to do it in OBIEE or at the DB level. In oBIEE you can do in a table privot view.

  Thnaks,
  Knani

• Need to reset the Data Warehouse

  Hello
  
  I need to reset the data warehouse so that I can start my first ETL process. However, I am not able to do DAC customer worm 7.9.5. When I click on 'Tools'-> 'management of ETL"->"Reset Data Warehouse"nothing pop up to do not know why, all other links and windows opens, with the exception of this. How can I solve this problem?
  
  Is it possible for me to do the reset manually?
  
  I checked on the internet and found AS below: -.
  
  D4 how do you run a full load (incremental)
  A: reset DataWarehouse. Just truncate the table S_ETL_REFRESH_DT in the repository of the dac
  
  So in our case, to truncate table will then be W_ETL_REFRESH_DT rite? Please confirm. We have planned to operate the ETL at 18:00 today.
  Y at - it all the other tables I need to truncate this way?
  
  Thank you
  Saran.

  Hello

  I worry if this window does not work correctly, you should probably work out why, I use 1.5.0_17 jdk in our environments (with apps 7.9.5) and that works fine, I suggest to try another version of the JDK and see if that fixes the problem.

  Kind regards

  Matt

• Need to view daq reads per second but only to record a reading every 10 minutes. I would also like to record the date and time, at the same pace. Need help

  Need to show daq reads per second, but only to record a reading every 10 minutes, need help

  You are also looking to taste to 1 Hz data acquisition?

  My approach would be to use the DAQ acquisition to time your loop display reading each acquisition, then use the loop counter to control the logic of your writing to file.  For 1 Hz and 10 minutes write I would use 'quotient and remainder' I / 600; If rest = 0, then write the data point.

  For the date and time, under Calendar palette use the time get in seconds food a DateTime Format to a string.

• Recording of data every hour, labview stops responding when the program stopped

  Hello. I'm doing a labview program to read the data and recording to a PDM file every hour for as long as it runs. First of all, I wanted to test it on every 15 minutes to work the bugs how. I made the attached VI and simulated data. It works fine but when I press the stop button to stop the program, the mouse cursor becomes the "wait cursor" and it remains like that until the program says "(ne répond pas) ' and then it crashes." Needless to say that the data is not recorded or corrupt. Do not do this with shorter time intervals (say, record data every 15 seconds). Is the long time period why its happening? Is there a better way to address the issue? Thank you!

  
  

• How to record data every second and present them in a table

  I got a set of data of an instrument and the acquired data to an AI, and I want to compare them in a table.

  Position of time (from AI) frequency (from Instrument) value of Q (of the Instrument)

  0.00

  0.10

  0.20

  0.30

  In the future, I want the table excellent export file.

  Could someone help me with it?

  No, you don't understand. If you have a flag outside the while loop, it will be not updated before the end of the loop. It must also ensure that the data type is correct when you move outside of the loop and I don't think that you did exactly what meant Dominic. I suspect that you wired out of 2D data, and that would be a mistake.

  Below is a simple shift register to create the data for the table.

  

  You should also check the free LabVIEW tutorials.

• Need to record the timestamp after activation...

  Hello world! I am currently working on a .vi for some fire tests and I need help, try to understand this.

  I have some smoke detectors in place. The tension extends from-10,4 V to 10.4 V and I use FieldPoint

  When the voltage is at 10.4 the detector makes no noise, or, when the detector is less than 10,4 V turn off meaning that it detected smoke.

  This decline occurs when I need to be able to record the timestamp and display it on the front panel. I thought of ways to do it, but I can't think about all the right ways.

  If anyone has any suggestions that would be greatly appreciated.

  Thank you

  -Tanya

  Hi tanyasue327,

  Assuming you are using the FP Read VI in order to acquire the tension of your FieldPoint, you should be able to use the output from 'timestamp' read FP to get the time associated with the value being read. "" The 'timestamp' output will be in a double data type, but you can use the ' timestamp' feature in the functions ' programming ' Timiing palette to convert this DBL to a Time Stamp data type. ' ' Then you can view this at the front panel through a time stamp indicator and/or write to deposit using the screw found in the functions file IO ' programming ' palette file IO.

  I hope this helps!

  Aaron P

  National Instruments

  Technical sales engineer

  http://www.NI.com/support