Migrate to new server hides

Similar Questions

• Update 10 gr 2 DB to 11 GR 2 while migrating to new server with the same operating system

  Hello
  
  I need to upgrade and migrate as well a 10.2.0.5 single-instance ASM no database 11.2.0.1 on a new server. Source and target texts OS is Solaris 10 (OS version identical on SPARC 64-bit server is started), but the target server is upscale. DB size is about 1 TB. Only concern is that the storage in the existing configuration will be used with the new server as well.
  
  Who will be the best way to do the upgrade and migrate with minimal downtime?
  
  Thank you
  Chaouki

  PL see your partners post - DB migration with movement of storage for the new server.

  Move the 10.2.0.5 database and storage on the new server, then install 11 GR 2 on the new server and perform the upgrade according to the upgrade Doc

  http://docs.Oracle.com/CD/E11882_01/server.112/e23633/TOC.htm

  HTH
  Srini

• TMS Migration to new server

  I'm moving our TMS existing 13.2.2 to a new server. One of the first steps is to copy the TMS encryption key. The instructions for doing this are: TMS Tools/Security Settings/encryption code. My problem is that when I open the TMS tools I don't have an option to select security settings. Is this something that is not available in article 13.2.2. If so, how do I find my current 13.2.2 encryption key

  I intend to upgrade to 14.X once the TMS existing 13.2.2 is moved.

  Looking through the TMS 13.2.2 Release Notes, the bottom of pg 3, they removed the option key encryption tools TMS.  Looking at the details of the CSCua72784bug, it is said:

  Encryption keys are not used by Cisco TMS until version 14. The option has no effect in 13.2.x and can be ignored.

  So that you can likely TMS 14.x upgrade and then go through the process of encryption key during the installation.

• Migration to new server vCenter ESX continuously.

  What would be the recommended steps to migrate seamlessly from one ESX host to a new vCenter Server?  I succumbed to find any documentation on this.  For some reason any I think remember me that with a previous version of Virtual Center (1.x and 2.x) that the host had to be in maintenance mode before it could be removed from the management server.

  I need to move the ESX 3.5 and 4.0 hosts to a new management 4.0.1 vCenter server.

  James Wood, VCP

  Senior Systems Administrator | Arizona Department of Transportation | Phoenix, Arizona

  You can simply disconnect and remove the host.  Then add the host in the new environment. This will affect any of your guests running. If your VI3 hosts, make sure that you have the available license server.

• My account is migrated to a new server, so I had to recreate the same account in Thunderbird, but I can not delete the old one - they appear together now.

  My account is migrated to a new server, so I had to recreate the same account in Thunderbird, but I can not delete the old one - they appear together now.

  If there is no email from the old account that you want to keep, move them in local directories first.
  Tools > accounts settings
  OR
  Right click on the email account in the fodler pane, and then select "settings".

  Select the account you want to delete.
  Click on "Actions account."
  Select 'delete account '.
  Click OK

  See the image as an aid:

• The steps required to perform a migration to a new server vCenter using distributed switches?

  We are currently on version 5.1 of vCenter and ESXi 5.1 on all our guests.  We use a vDS on our current server vCenter and will need to migrate to a new server vCenter soon.  Is there a documentation about the steps to migrate to a new server vCenter using switches distributed?  We hope to achieve this goal without any downtime.  The problem is that we need that VDS on our 10GB network for the aggregation of links.  If having to migrate guests at standard switches before moving them to the new vCenter server, there will be problems of network performance.

  Because information about your environment are stored in the database of vcenter al you should just be able to stand up the new vCenter server and that it points to the existing database

• Migrate DB composer view existing to a new server of DB

  I need to move our current database view composer from its current location (oldserver1) to a new location (newserver1), while maintaining the existing View composer service. It of just a matter of the DB Backup, restore to a new location, create a new ODBC and then change the settings for the DB composer within the view administrator? The function of composer should not need to be back in place, right? In addition, composer uses the port 18443 by default, but the new database uses port 1433 and it's the last DB that will need to be migrated to the new server (that is, there are other DBs residing on newserver1).

  So that you do not move the service shouldn't you need to reinstall or change anything within the opinion as the configuration for the service views.     The 18443 is see how connect to the service not the database, so you should not change this either.

• R there are certain applications in essbase. How do I know which is unicode and Nonunicode, so that we can migrate to a new server.

  We need to migrate from old to new server, so is there a chance as change properties where we can know wheather the application is unicode or nonunicode, so that we can make similar in the new server applications by using the migration wizard, first by making applications same dummy and then use the wizard to migrate.

  You change the properties in the database and not on the application level, try at the application level.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Migration of instance new server Unix AIX11i / 10g

  Hi all

  We intend to migrate our application/database to the new server. Please let me know how to save/fast time of this migration.

  I went through the document below, but it seems that this will consume more time.

  10 g Release 2 process Import/Export for Oracle Applications Release 11i [Article ID 362205.1]

  
  

  Application: 11i

  DB: 10G

  Platform: AIX
  

  Kind regards

  MD

  Option 2: What backup should be restored? Do you mean restore backup DB with APPL_TOP, COMM_TOP & OA_TOP? We need to copy anything else here? and do we not have any document to this option?

  Restore all files from node level database and the application without exception.

  Option 3: To copy the files, we need to copy db_top, data_top, appl_top, comm_top and oa_top. We need to copy anything else here? and do we not have any document to this option? I hope we can run level dbTier/apps adcfgclone giving the source xml files.

  Copy all the files mentioned in the doc of rapid Clone. If you chose to go with this approach, then you need not file context source as quick Clone will create new ones for you (must be identical to the source ones).

  Thank you

  Hussein

• 9.0.2.0.8 zone v1 migrate to 11.2.0.3 new server

  Hello
  I'm going to migrate my current db 9.2.0.8 (version of zone is 1!) to a new server 11.2.0.3, so I'm wondering if I should upgrade version of my current 9iR2 to version 4 time zone! Before update
  BTW, my new server for a zone schedule v14.
  Thank you

  Hello
  Yes, you can upgrade after upgrade of database time zone
  Zone upgrade, you'll find instructions to
  Actions for the DST updates when upgrading to or the application of the 11.2.0.3 Group patches (Doc ID 1358166.1)
  Actions for the DST updates when upgrading to or the application of the 11.2.0.3 Group patches (Doc ID 1358166.1)

  Thank you
  Krishna

• Migration of VCenter 4.0 to 4.1 on the new server - database upgrade problem

  Hello

  I am trying to migrate from a 32-bit W2K3 vCenter Server 4.0 to 4.1 running on a new server W2K8 R2.

  The servers have different hostnames and IP addresses.

  The datamigration tool ran on the existing server and registered the relevant question of config. I run it on the new server, and he acknowledges that there is data on migration and launch the installation program. This will go through the first steps and connects successfully to the db SQL 2005 (which is on a separate machine) via the DSN. Then, it generates an error:

  "vCenter server does not support the upgrade of database version 2.5u5 or below." Please upgrade the database to a supported version and try again".

  Thus, the vCenter database is in an old 'format '?

  How can I update manually?

  Thank you very much

  P

  Welcome to the community.

  VCenter 4.0 DB is different from 2.5, for its strange.

  Check the DSN configuration if you point to the correct DB.

  André

• Export/migrate my BC site to a new server

  Is it possible to export/migrate my BC site to a new server? (I bought a new domain that I would like my muse created adobe site)

  Thank you

  Remi

  You can export the site directly from Muse in HTML and upload it to your server.

  Useful links:

  http://www.Lynda.com/Muse-tutorials/exporting-your-site-HTML/89048/104791-4.html

  http://helpx.Adobe.com/Muse/topics/exporting-publishing.html

  Thank you

  Sanjit

• Migrate to the new server vCenter hw

  I make plans to migrate all my my old hardware of server vCenter ESX hosts to a new (and much faster). Both vCenter servers are version 4. To delete a my old vCenter ESX host, I need to put it in maintenance mode. Maintenance mode means turn it off or by moving my VMs to other hosts.

  Is there a way to move my ESX hosts to the new server vCenter without voltage VM?

  Hi bjornl,

  If you need to keep the virtual machines running on the host computers, while removing a cluster host, data center or same vCenter, and then select the option 'Disconnect' first. The host shows as grayed out and disconnected. Once in this state you can 'remove' the host of your first vCenter.

  Create your new data center and then "Add host" Cluster in the new. Everything will be powered on your virtual machines.

  The only issues I've had with this is if the original or the new cluster using vMotion improve compatibility (EVC). This aspect must correspond to both ends. Once you do this, it works fine.

  Hope this helps,

  Dan

• Apex 4.0 to 4.1 on the new server migration translated application problem

  Hello
  
  I have a translated application works well on an apex 4.0 Server and want to upgrade to 4.1 using a new server.
  
  I did what I do normally, export schema and application, and then import the schema and the applications on the new server.
  
  This does not work for the main application, but it does not work for the translated application.
  
  If I run the application right after having established import, changes to the login pages between two languages that I use, but when you try to connect with the second language, it gives me the following error (112 is the main language and 113 is the translated application)

  Error     Error processing authentication.
            ORA-06550: line 2, column 37: PLS-00103: Encountered the symbol ".113" when expecting one of the following: ( ; is with authid as cluster order using external deterministic parallel_enable pipelined The symbol ".113" was ignored.

  If I have "seeds" and then "publish" the application in the menu of globalisation so the second language does not work at all (it continues to display the main language in the selection of the translated application).
  
  I went through a lot of threads and it seems to a problem with the translated applications.
  
  Is there a valid way to make the translated application work for this migration?
  
  Teo

  Hello Teo,

  export your 4.0 system XLIFF file development. Also, make sure you import your application with the same application id in the 4.1, otherwise all the internal IDS will move.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• application server oracle migration to a new server with SSO

  Application server: 10.1
  repository database: 9.2.0.6
  
  Old OS: Tru 64
  New operating system: Solaris
  
  We just want to migrate to the new server. We're not modernize our versions of oracle. We continue to get username / password is wrong when we try to use single sign on with the new repository. When contact us the Oracle support we work around the race. They are simple and there is no documentary research he actually did this or knows how to do a migration.
  
  Is someone did a migration of the repository with single sign on? What metalink document did you use?
  Is it possible to simply export/import data?

  you might be falling into this scenario.
  the version of your database is the same, you have found the similar error stack, on executing the script of ssomig.bat even.

  Please see this note on Metalink2: Doc ID: 430523.1

  '' Cause. ''

  The 10.1.2.02 standards body. ssomig script uses the import/export utilities in its $ORACLE_HOME, 10.1.x. The SSOMIG script assumes that the metadata repository database is a version that uses the same current version of SSO import/export utility. In your case, this is not true.

  This causes a problem when the source repository of metadata is 9.2 versions. In a database import/export utility perspective, this is an unsupported configuration, a newer version of export cannot be enforced against an earlier version of the database. An earlier version of export can only be run on a later version of the database. It is documented in the Guide of the database utilities.

  Solution
  To implement the solution, please perform the following steps:

  On the source server
  1. run the House against the 9.2.x 101202 fight database catexp.sql.
  2 copy files/directories SSO and Perl 101202 House Home 9207
  3. run the ssomig-export of 9207 House
  4 copy the ssomig.dmp resulting and the ssoconf.log to the SSO target
  5. run ssomig - import.
  "

  ******************************

  If that does not solve your problem, then look in this note.
  DOC - ID: 372328.1

  AMN