Similar Questions

• The upgrade to ESXi 4.1 with storage iSCSI software to ESXi 5.5

  I intend to upgrade ESXi 4.1 with which I have attached to ESXi 5.5 iSCSI software storage

  I've updated all my guests who were on the SAN storage with no problems.

  I would like to know that if it there's nothing I should take care before I update the host connected iSCSI to ESXi 5.5, as for the hosts with SAN attached storage I made to remove the cables of SAN before upgrading the host.

  Also, if all known problems, you will be informed during the upgrade to ESXi 4.1 to ESXi 5.5 with iSCSI Software storage, please let me know?

  If there is no different process to upgrade coz in ESXi 4.1 I do not see this link ports of iSCSI vmkernel ports software iSCSI but I know in ESXi5.5 we have to or I just launch a procedure of standard upgrade via the Update Manager and everything will be taken care?

  Thanks in advance

  With ESXi prior to version 5, linking ports had to be done via command line. However, if it has been configured correctly, you should be able to upgrade to ESXi 5.5 (assuming that the host has not been previously updated since version 3). BTW. the last time that I disconnected the host of storage for an upgrade has been with ESX 3.0.

  André

• vDS and iSCSI VMKernel

  It is preferable to use Standard switches or switches for iSCSI VMKernel ports vDS?  What is the best way to go?

  Is there documentation describing the process somewhere?

  aacjao wrote:

  Could it facilitate the management of use vDS rather than this configuration on each host?

  For iSCSI vmkernel will not really facilitate the management that you would have to create "virtual interfaces" unique for each host, so it will be more or less the same amount of work.

  aacjao wrote:

  Y at - it literature all about putting this in place on vDS?

  The official manual on iSCSI has only documentation on how to implement on vSwitches standard: http://pubs.vmware.com/vsphere-50/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-50-storage-guide.pdf - page 76.

  On how to configure Vmkernel interfaces on a distributed switch, you might see this manual and page 32.

  Most of the best practical information on the web around iSCSI and VMware are around the ordinary vSwitches - that might make it easier to install and troubleshoot.

• initator iSCSI Software

  Hello

  is there a way to activate the Initator ISCSI software on a host ESXi 4.1?

  I was playing arround with the orders-Get /-Set-VMHostHba, but it dosen´t work.

  Another problem is that I identify the number of the vmhba cause I m using models of different hardware, I tried the following command:

  $iscsi = get-VMHostHba - VMHost $vmHost | where {$_.} {Model - like "adapter software iSCSI"} | Select device but $iscsi always returns "null".

  It would be great if sombody can help me this two probs bit.

  Thanks in advance

  Odd, works for me.

  Have you made a

  Get-VMHostStorage $vmHost | Set-VMHostStorage -SoftwareIScsiEnabled $true
  

  to enable iScsi?

  What is this returns everything that said "IScsiHbaImpl"?

  Get-VMHostHba -VMHost $vmHost | %{$_.GetType().Name}
  

  Do you see an HBA with a status of "independent"?

  Get-VMHostHba -VMHost $vmHost | Select Name,Status
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• error after creating a console service on vSwitch1 for iSCSI

  For iSCSI, I created vSwitch1 and put a NETWORK card and assigned IP address 10.1.1.1 and 10.1.1.2 default gateway on this (photo 0).

  on iSCSI host 10.1.1.2. The two connenct directly.

  VSwitch0 192.168.1.201, gateway 192.168.1.254 default with another NETWORK card

  Click on property for vSwitch1-> add-> service console

  put the IP address 10.1.1.1 and subnet

  and not changed Service Console Default Gateway (photo 1)

  Finally, get an error message (on photo 2) and the new Console of Service cannot be built.

  So changed Console Default Gateway to 10.1.1.2 Service (photo 3), got an error message too

  George,

  You can have the same IP addresses on the Service Console and VMkernel port!

  Network for software iSCSI Storage configuration describes how to configure iSCSI.

  André

• What is my access code for the software updates

  What is my access code for the software updates?  It seems to be a six-digit numeric code, but I have no recollection of anyone establishing.

  Take a look at this thread, what is the password for software update

• looking for financial software for my macbook pro

  I'm looking for financial software for my macbook pro.

  One option that works well for me it is Banktivity (until recently, it was named iBank). Very good software and great support. https://www.iggsoftware.com/banktivity/

• How to use PowerPhotos to perform a migration of Aperture for photo

  We are running Yosemite and openness. We have about 10 Aperture libraries, some libraries have about 6000 images.

  We have the Photos app on our Mac but don't use it yet.   What workflow we should follow to upgrade to El Capitan and migrate from Aperture for the Photos using PowerPhotos.

  I have been informed that we should first upgrade to El Capitan.   But I don't know how to use PowerPhotos to help us in this migration.

  I read on the PowerPhotos site below.

  "If you have a lot of existing iPhoto or libraries to open that you want to migrate Photos, PowerPhotos will help automate your migration if you do not have to spend time to care for children of this long process."

  It's a good question for FatCat (authors of PowerPhotos) support or study Chapter 7 of their manual - https://www.fatcatsoftware.com/powerphotos/Help/table%20of%20contents.html

  LN

• is there a new anti virus for mac software

  is there a new anti virus for mac software

  Mac do not need antivirus help.  Period.

• Received a flashing alarm indicating that I had a virus on my MacBook pro.  Could not get rid of it, until I did a hard reboot.  Deemed scan of Malware for Mac software?  All this experience?

  I just got an alarm flashing indicating that I had a virus on my MacBook pro.  Could not get rid of it, until I did a hard reboot.  Deemed scan of Malware for Mac software?  All this experience?

  These alarms are generally scam popups loaded from the Internet and is not caused by malicious software, but you should always look for other odd behavior or unexplained slowness.

  (140573)

• HP Pavilion 15-ak085na: could not find the WiDi WiDi/Pro Intel® for Windows software

  Hello

  When I install the "Intel® WiDi/Pro WiDi Software for Windows" software downloaded from https://downloadcenter.intel.com/download/25153/Intel-WiDi-Pro-WiDi-Software-for-Windows , he said:

  

  While they inspected the processor competebility intel I can see that it supports the wireless display.

  Can you please help me to be confirming that my dosent computer laptop 'HP Pavilion 15-ak085na' have support for wireless display or point me in the right direction to download the software.

  Thank you very much

  Youssouf

  Hello:

  You need a PC with an Intel HD graphics card that meets the specifications of widi

  You need a PC with an Intel processor that meets the specifications of widi

  You need an Intel wireless network adapter that meets the specifications of widi.

  Your PC should have all 3 of these items to run Intel Widi.

• Is it possible to connect my Mac mini to my Mac Pro laptop using the memory on my mac mini for installing software Ableton as I don't have 3 GB available on my Mac Pro.

  Is it possible to connect my Mac mini to my Mac Pro laptop using the memory on my mac mini for installing software Ableton as I don't have 3 GB available on my Mac Pro.

  I want to download Ableton software, but it requires 3 GB of free memory that I have available on my MacPro laptop not because most of it is used for my library of music because I'm a DJ.

  I'm not sure how I can do it or not at all.

  Thank you very much.

  1. a Mac Pro is not a laptop. Its a big desktop computer.  You probably have a MacBook Pro, which is a laptop.

  2. No, you cannot share the memory (live RAM) or storage (disk space, which is not memory) like that between computers.

  However, it is very very bad practice to have so little storage space available for your computer.   If you have less than 3 GB, you should seriously consider an external drive. and unload some files on the outside. Its best not to leave your hard drive to go below 10 GB of free space because it can seriously affect your computer's performance.

• an error occurred when checking for a software update

  My iphone6s when I check for the update, dosent work and say:

  an error occurred when checking for a software update.
  Please help me
  

  Greetings harera22dec,

  Thank you for using communities Support from Apple!

  I understand that in trying to upgrade to the latest version of iOS on your iPhone, you get an alert that says: "year error occurred while searching for an update of the software.»

  To begin troubleshooting this situation, I would first work through the steps in the section on your iPhone, iPad or iPod touch in the following article, and then try the update again.

  On your iPhone, iPad or iPod touch

  If you cannot connect to the iTunes Store on your iPhone, iPad or iPod touch:

  1. Make sure that your date, time, and time zone are correct. Tap Settings > general > Date & time. Time zone can list another city in your time zone.
  2. Make sure your iOS software is up-to-date. Tap Settings > General > software update to check for updates. You can also connect your iOS device to iTunes and click on search the update on the summary page of your device.
  3. Check and verify that you are in range of a Wi - Fi router or base station. If you use the cell service, make sure the cell data are lit settings > cellular. If you are connected to cellular data, large items can not download. You may need to connect to the Wi - Fi to download applications, videos and podcasts.
  4. Make sure you have an active Internet connection. Check your device Manual for Internet connectivity.
  5. Check if other devices, such as laptops, are able to connect to the network of Wi - Fi and Internet access.
  6. Reset the wireless router by turning and then again.

  If there is still a problem, learn what to do if your device connects to a Wi-Fi network.

  If you cannot connect to the iTunes Store - Apple Support

  If the problem persists, try updating your iPhone from another network or from iTunes on a computer than this article implies.

  If you receive a message that says: "year error occurred downloading iOS ', try again later. If this happens again, try to update your device using a different network or use iTunes to update your device.

  Get help with updates of live iOS - Apple Support

  Have a great day!

• Is it possible to get a Certificate from Microsoft or official recognition from Microsoft for my software?

  Hi all, I'm Lee. It's nice to meet all of you here.

  I have a question that I actually have to ask here since I can't really find an answer Google search or in this forum.

  Here's the situation, my business has intensive software that is developed with Microsoft Visual Studio and coded with Visual Basic.NET. He works alongside the databases from Microsoft SQL Server Management Studio as well. All this time, that this software is published and provided to clients, we do not have a recognition of Microsoft or certification on this software.

  So here's the question: is it possible to ask for an official certification or recognition from Microsoft for this software?

  I have this software recognized by Microsoft to create a recognition wider and easier for potential customers to my business. Although my company offers, and sell this software for many years already, it seems to us that we have this software officially recognized by Microsoft in order to obtain the trust of potential customers.

  So far, I discovered this inscription as an application developer is as close as one but y at - he developed a guide to get there?

  Thanks for anyone who can guide me from here.

  Thank you

  Lee

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Why are there no update in September for Malicious Software Removal Tool?

  Why are there no update in September for Malicious Software Removal Tool?

  Hello

  My guess is that it is usually released the 2nd Tuesday of the month which is tomorrow 13/09/2011.

  For anyone needing a link - it is also available via Windows Update.

  Microsoft® Windows® malicious software removal tool (KB890830)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">