error after creating a console service on vSwitch1 for iSCSI
For iSCSI, I created vSwitch1 and put a NETWORK card and assigned IP address 10.1.1.1 and 10.1.1.2 default gateway on this (photo 0).
on iSCSI host 10.1.1.2. The two connenct directly.
VSwitch0 192.168.1.201, gateway 192.168.1.254 default with another NETWORK card
Click on property for vSwitch1-> add-> service console
put the IP address 10.1.1.1 and subnet
and not changed Service Console Default Gateway (photo 1)
Finally, get an error message (on photo 2) and the new Console of Service cannot be built.
So changed Console Default Gateway to 10.1.1.2 Service (photo 3), got an error message too
George,
You can have the same IP addresses on the Service Console and VMkernel port!
Network for software iSCSI Storage configuration describes how to configure iSCSI.
André
Tags: VMware
Similar Questions
-
Error created another Console service, unable to connect to the host by vSphere vCenter
After creating an another Service Console unable to connect to the host by vSphere vCenter. How can I remove the now Service Console or make the old one further work well?
Thank you.
George
This KB will show you the steps to re-create the Service Console, but you'll need to console or ILO access to the ESX host.
http://KB.VMware.com/kb/1000266
If you have found this device or any other useful post please consider the use of buttons useful/correct to award points
Twitter: http://twitter.com/mittim12
-
R6034 error after installing update KB890830, KB2419640, and KB2478935 for Windows Vista
R6034 error after installing update KB890830, KB2419640, and KB2478935 for Windows Vista
This message is pop:
Microsoft Visual C++ Runtime library
Runtime error!
Program c:\windows\helppane.exe
R6034
A request made an attempt to load the wrong C runtime library
Please contact the support team of the application for more details
This message appears as soon as the machine restarts
Happens if I try to run Skype
There is no problems until the updates have been installed
This problem is urgent that this computer is used for a company
Thank you
David SchlachterHello
In addition to the suggestion of J W Stuart MVP I ask you to re - install the Microsoft Visual C++ 2008.
Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86) for 32-bit editions of Windows
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a5c84275-3b97-4ab7-A40D-3802b2af5fc2&displaylang=enMicrosoft Visual C++ 2008 Redistributable Package (x 64) for Windows 63 bit editions
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd2a6171-e2d6-4230-B809-9a8d7548c1b6&displaylang=enThen uninstall and reinstall the software Skype and check.
I hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
I have a need to call a web service from an APEX application, so I thought I'd try to experience everything first call a web service that is accessible to the public from W3Schools. The URL of the WSDL that I use is:
http://www.w3schools.com/webservices/TempConvert.asmx?WSDL
The 1st thing I try in APEX is to create a Web Service based on the above URL reference. Problem is that I get the following error:
ORA-29273: HTTP request failed ORA-12535: TNS:operation expired
Any ideas?
I even tried with some other URL WSDL and always the same exact error.
Thanks in advance.
Hello
Maybe your database server have firewall that blocks to internet connection?
Kind regards
Jari -
I uninstalled Blackberry Podcasts a few days ago, and then re-installed. After that, I am now presented with this error message at the launch of the app: "Podcasts service does not support your carrier on this device" I tried several times to uninstall/reinstall. This error message is not sensible for me because it was working fine when I had installed originally there. James.
I'm located in the Canada. Installation of the v1.5.0.47 (unreleased/non official) solved the problem. Not clear what it is, maybe the official version was incompatible with my new Blackberry 9900.
-
Error after creating a LOV on EmployeesVO for DepartmentId attribute
Hi Experts ADF,JDev version 11.1.1.7.0
I have an EmployeesVO. And I did the DepartmentId as a list of values, under UI tips that I have selected DepartmentName.
When execution of the module of the application when I change another value of LOV. The system hangs forever.
is this a bug of 11.1.1.7.0 version?
Please advice accordingly.
Thank you
Animesh
Hi Anne,.
I think you are wrong in your PB-primary and foreign key relationship, so that the erroneous association and links created by Jdeveloper while creating tables business components. Remove all associations and links. Remove all your application data model. And create LOV on departmentID.
Add from your application data model.
Thank you
Fouzia
-
Windows does not start after the installation of Service Pack 3 for Windows XP
Hey guys I have a question I received this automatic update (Windows Service Pack 3) I am running Windows XP Media Center Version 2002, the problem I have is after installation of the update my computer guard stop and windows not not start, I had to go back to my computer to a safe point (usually before the update) and I say usually because I already tried to install this two update times with the same result.
I hope you can help me I really need your help, I'm totally distraught and I received the update to install it but I'm afraid to install fearing that my computer will not start.
Thank you.
Hi Crickets1,
1 did you receive an error during the shutdown process?
I suggest that you refer the below Microsoft article and try the steps mentioned to do before you install Windows XP SP3.
Steps to take before you install Windows XP Service Pack 3
http://support.Microsoft.com/kb/950717
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Error code 80070005 when installing Service Pack 1 for Windows Vista.
Original title: error code 80070005.I tried everything but... Please help!HKLM\software\Microsoft\Windows\CurrentVersion\Component Servicing\Retry Agent of baseHKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\SqmHKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP1-KB936330~31bf3856ad364e35~x86~~6.0.0.18000HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP1-KB936330~31bf3856ad364e35~x86~~6.0.0.18000\InstallCounterThe most common problem for the denial of access is usually anti virus software or some other programs interfere with the update process.
Download the complete file and install: -.
See this article for information: http://support.microsoft.com/kb/947366
Resolution 3: Close or disable any applications that may be running, restart the computer, and then install the service pack. -
Windows error system32\rtkrnlpa.exe. loading service pack 3 for windows xp
I get a windows/system32/rtkrnlpa.exe is open, or inuse by another application when I try to download service pack 3 on windows xp?
help please
Hello
1. have you connected external devices other than the keyboard and mouse?
2. what security software is installed on your computer?
I would suggest trying the following methods and check if it helps.
Method 1:
Disable temporarily the security software and then try to load Service pack 3 and check if the problem persists.
Follow the steps to temporarily disable the security software:
a. right click on icon antivirus on the left corner of the taskbar.
b. click Exit or settings and temporarily disable the security software.
Warning: If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2:
Put the computer in a clean boot state, and then try to load Service Pack 3 and check if it works.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: once you have completed troubleshooting try the steps to configure Windows to use a Normal startup state.
See also the following Microsoft article.
http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3
Hope the information is useful.
-
Power options do not work after the installation of service pack 3 for Windows XP.
I just reinstalled the SP # (for the fourth time) by micro dirs, now power options do not work on my XP
"CASE # 1160-173781" ive just "REINSTALLED" SP3 on my XP HOME for the 4th time according to the instructions of Microsoft 'INDIAN-TECH? NOW MY POWER OF DAMNNED OPTIONS DO NOT WORK GRRRRRRRRRRR. SP3 IE8 ARE NOT DESIGNED FOR HOME WINDOWS XP SOFTWARE! and hard - to - go * if im going to pay for them fix THEIR MESS! everyone in firured here a way to solve this problem? I FIND A LOT OF QUESTIONS IN THE FORUM THING, B U T, "NON!"
This link shud hlp sup:
http://fivepercent.us/2008/08/15/Windows-XP-standby-and-Hibernate-problem-update-82008/
http://fivepercent.us/2008/06/06/Windows-XP-standby-and-Hibernate-problems-solved-Finally-i-hope/
-
Any suggestions on how to restore this function?
Please click the small arrow to the left of the search box, and select the icon or tile. Who help me?
-
Error in creating the Service for the Service of Bussiness name
Hi friends
I create a custom for Service of Bussiness Service program that is used to download data from spotbilling to the BCC. The CM_Sbm_Upload service program consists of ID programs CIPBSEGP, CIPMMRDP, CIPTSATP com. When I give it to the bussiness service I get the error message
Service missing metainfo for "CM_SBM_UPLOAD."
pls help me solve this problem.
Thanks and greetings
Jean JacquesHello
I have the same error during my development of a maintenance of page service.
Please check if the cm.jar is correctly deployed in your splservice.ear and also all other deployment directories.
You can find them in the window out of eclipse after executing the script "Deploy CM".When the cm.jar is deployed, check if the annotations are correct.
My annotations are which looks like this:
/** * Perform Batch Add. * * @PageMaintenance (secured = false, service = CMIMDIMP, * body = @DataElement (contents = { @DataField (name = CM_SIMULATION) * , @DataField (name = XML_REQUEST)}), * actions = { "change" * , "read"}, * modules = { "foundation"}) */
To connect to a Service on Page, you must first create a service program and the name of 'service' of the service program must be
the name of the annotation of service you specified in your Page Maintenance Service, in my case "CMIMDIMP".There are no validation when registering the issuance of service, validation occurs when you save the business.
BTW. JD - gui.exe allows you to decompile the file cm.jar, but you will not see the annotations!
I use 7 - zip to view the ear file. -
Hi Experts,
I am looking for a best practice to make the error handling in the MAF.
Currently my application is using AMPA and call the REST service.
However, I would like to know how to handle this kind of error
1. the device is not connected to the network (can we personalized it?)
2. the device is connected to the network but cannot call service
3 and the other exceptions of the asynchronous call to the AMPA
In addition, how to mark a method call in the exception handler?
referring to this http://multikoop.blogspot.com/2014/02/adf-handling-exceptions-from_14.html in ADF tf we mark as exception handler.
Best regards
Hendry
Hendry,
You have several options. It depends on how you want to handle exceptions:
-If you just want to hide the mistakes of web service end-user call, you can set the showWebServiceInvocationErrors property in the persistence - mapping.xml to false (you want to generally this set to false, by putting your application in production, the default value is true, because during development, it is more convenient to directly see the errors of appeal WS)
-If you want to display a custom error message, you can create a subclass of RestJSONPersistenceManager, register for this subclass using the property "remotePersistenceManager" in persistence - mapping.xml and override the handleInvokeRestServiceError method.
It depends also how you want to process POST/PUT/DELETE requests that fail. Do you want the AMPA runtime register this request as pending for the runtime synchronization action automatically tries to return the claim later? Or you just want to display an error message to the end-user with a text like "try again later?
Steven Davelaar,
Oracle Mobile A-team.
-
Can I create a second service console in ESX 2.5.5?
Can I create a second service console in ESX 2.5.5?
Yes, I did in ESX 3. +, but I can not find/check it's ok in ESX 2.5.
Procedures, orders or comments appreciated.
ALL POINTS WILL BE AWARDED.
No, you can not - the service in ESX 2.x actuallys console loads before the vmkernel and has control over its own NETWORK card and the physical memory - in esx 3.x (vSphere) the VMkernel charge first and provides these resources to the service console allowing you to create several service console ports -
If you find this or any other answer useful please consider awarding points marking the answer correct or useful
-
I tried that at this link:
http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/error-after-fresh-install-of-Windows-XP-Pro/a617bb44-9944-4338-b82e-c18372ad986f?page=4&TM=1313954410562In particular, I tried everything (except #7-la destruction - because I just destroyed yesterday... LOL)
1 reset
2 Run Installer Windows Update Agent method 1 here: http://support.microsoft.com/kb/943144
3 run the difficulty of method 2 here: http://support.microsoft.com/kb/943144
4 run the difficulty from here: http://support.microsoft.com/kb/971058
5 reset
6 try Windows Update
7 if it does not, repeat steps 1-6 before using your preferred method of destruction of the computer.I have a completely fresh installation. I reformatted yesterday installed the operating system, which comes with 3 SP.
I used the Dell site to get the rest of my drivers and then began the process of trying to update. Immediately, I got the error above.
According to that link above, 'FinnGange @ & anyone else having a similar problem: to avoid confusion, please start your own, new thread on YOUR specific problem and your computer. " Indicate your current version of IE, and the full version of Windows.
So, here is my new thread! :)
I am running XP Pro 2002 SP3 and IE8
Please help me with this problem.
Thank you
Kris
2 Run Installer Windows Update Agent method 1 here: http://support.microsoft.com/kb/943144
If you go to that page and made scroll to Method1, you will see there are three installers. Which did you use?
Also, what is the make, model and model number of your PC? Is your Windows XP 32-bit or 64-bit?
Did reboot you after you run the Update Agent Installer?
Dump you all your IE8 temporary Internet files and cookies?
Maybe you are looking for
-
Hello The company that I work for gave me a laptop Satellite A30. Now my system broke down and I need to restore. However, I wasn't able to find a recovery to original Windows XP Home edition CD. Please, tell me, is this kind of restore CD provided w
-
Whenever I'll sign my Skype chat, I can connect fine for a few seconds, then it seems to start me back to the login screen. I now tried the update but no luck so far.What is happening and what I try next?
-
A color box control are editable so that only 4 colors can be selected.
Hello I wanted a color box to be used as a control so that when left clicked, there are 4 colors that they can select which will dictate what will do the program. Currently, make a left click on the color box brings a variety of colors, and the only
-
"Office Home and Student" (3 licenses home pc)
We HAD to reinstall vista on my wifes laptop. I got a copy of "Office Home and Student" (home 3 pc licenses) on this laptop. If I reinstall, it will use a different install lic. # or use the lic. # He had on first installation?
-
battery for Compaq laptop problem
I just upgraded to windows 8 to 8.1 on a compaq CQ58 laptop. I've also updated to HP support assistant. On startup, I get a message telling me that the battery must be replaced because its capacity is very low... I have read suggestions on checking a