migration of APs to the 5508 controller 4402

Similar Questions

• 2602AP will not register with the 5508 controller

  Hello all-

  We have a 5508 controller that manages the HA to about 20 branches - each branch has its own subnet. We have a single branch (subnet) with new 2602 AP who will not register with the controller. All communications to that subnet appear normal and there is no ACL in place between the AP and the controller. The AP is able to resolve the IP address of the controller via DNS and start the registration process, but then timeout. We have installed 2602 AP successfully to other areas of the branch and they fit without any problems - it is a problem only in one branch. I have attached a few debug messages below for a single point of access (it's a production environment, so I analyzed useless info) and also included messages from the console to a different access point (the console AP messages are the same). There are currently 9 AP here and none of them will record this. Any ideas?

  Capwap debug events:

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9 has: Discovery d1:10 request 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9 has: d1:10 join priority Processing status = 0, priority 1 of incoming Ap, MaxLrads = 300, joined Aps = 272

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:39:32.992: 44:2 b: 03:9 has: d1:10 DISCOVERY LWAPP APPLICATION received at 68:ef:bd:8e:48:6f on port "13"

  * spamApTask0: 14:39:32.992 Dec 11: Discovery 44:2 b request: 03:9 has: d1:10 elements in LWAPP of AP supporting CAPWAP

  * spamApTask0: 14:39:42.903 Dec 11: connection of DTLS 44:2 b: 03:9 has: d1:10 not found, creating new connection for 10:29:9:190 (44306) 10:5:13:4 (5246)

  * spamApTask0: 14:57:52.301 Dec 11: DTLS closed connection events receivedserver e8:ba:70:dc:d1:c0 (10:5:13:4 / 5246) client (10:29:9:190 / 44306)

  * spamApTask0: 11 Dec 14:57:52.301: e8:ba:70:dc:d1:c0 no entry there for AP (10:29:9:190 / 44306)

  * spamApTask0: 11 Dec 14:57:52.301: e8:ba:70:dc:d1:c0 entry no. AP exist in the temporary database for 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9 has: Discovery d1:10 request 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9 has: d1:10 join priority Processing status = 0, priority 1 of incoming Ap, MaxLrads = 300, joined Aps = 272

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.916: 44:2 b: 03:9 has: d1:10 DISCOVERY LWAPP APPLICATION received at 68:ef:bd:8e:48:6f on port "13"

  * spamApTask0: 14:57:53.916 Dec 11: Discovery 44:2 b request: 03:9 has: d1:10 elements in LWAPP of AP supporting CAPWAP

  * spamApTask0: 14:58:03.824 Dec 11: connection of DTLS 44:2 b: 03:9 has: d1:10 not found, creating new connection for 10:29:9:190 (44306) 10:5:13:4 (5246)

  Debug Capwap errors:

  * spamApTask0: 11 Dec 15:17:33.715: e8:ba:70:dc:d1:c0 abolition PT 10.29.9.190 which has not been surveyed

  * spamApTask0: 11 Dec 15:17:33.716: e8:ba:70:dc:d1:c0 DTLS connection has been closed

  Debug Capwap Details:

  * spamApTask0: 11 Dec 15:24:29.419: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:24:35.542: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:24:41.555: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:24:49.555: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:25:29.420: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 15:25:29.420 Dec 11: connection of DTLS 44:2 b: 03:9's: d1:10 0x1a1703c8 closed by controller

  * spamApTask0: 15:25:29.421 Dec 11: msg closed connection CAPWAP DTLS

  Journal of the Console from the AP:

  Translate "CISCO-CAPWAP - CONTROLLER.ad.pps.k12.va.us"... the domain server (10.29.8.3)

  * 00:00:57.511 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings. [OK]

  * 00:01:10.511 Mar 1: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 16:05:56.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

  * 16:06:17.495 11 dec: % CDP_PD-2-POWER_LOW: all disabled radios - NEGOTIATED WS-C3560E-24PD (68bc.0c03.8015)

  * 11 Dec 16:06:28.231: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2051 retransmission count Max reached!

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  * 16:06:55.999 11 dec: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.5.13.4:5246

  * 16:06:55.999 3 dec: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

  * 16:07:06.367 11 dec: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 16:07:07.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

  * 11 Dec 16:07:39.151: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2051 retransmission count Max reached!

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  * 16:08:06.999 11 dec: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.5.13.4:5246

  * 16:08:06.999 11 dec: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

  * 16:08:17.367 11 dec: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 16:08:17.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

  *Dec 17 15:53:47.463: %CAPWAP-3-ERRORLOG: Selected MWAR 'IRC-WLC-5508'(index 0).
  *Dec 17 15:53:47.463: %CAPWAP-3-ERRORLOG: Go join a capwap controller
  *Dec 17 15:53:47.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246
  *Dec 17 15:54:23.131: DTLS_CLIENT_ERROR: ../capwap/base_capwap/dtls/base_capwap_dtls_connection_db.c:2051 Max retransmission count reached!
  

  Get much better.

  WAP has selected the 5508 with good firmware.  WAP sends a JOIN request to 10.5.13.4 but cannot recover anything.

  Firewall?  Routing loop?

  What so-called "remote site", how is it connected to your office?  Dark fiber?  INTERNET SERVICE PROVIDER?

  You know what?  Can you post the output in the following commands:

  1 WAP: sh of stocks;

  2 WLC: sh sysinfo

  Nuts, I should already posed for these info before.

• Successor to the 5508 controller?

  Hello

  I am currently using some 440 x controllers and I guess it's almost time to upgrade. I don't really want to buy a 5508, just because it is already > 4 years and so probably not very future proof (we have a 5-year window). On the other hand, the controller of 5760 seems to miss several features and has not even more since WLC 8.0 has been released. Currently, I'm also quite confused on the controller of Cisco strategy...

  Anyway, did anyone of you has heard a successor 5508 or what's going to happen with the two not synchronized release threads (ios and wlc based)?

  Thank you

  Patrick

   Anyway, has anybody of you heard about a 5508 successor or about what will happen with the two not synchronized release threads (ios and wlc based)?

  The answer is 'yes '.  The long answer is "talk to your Cisco AM / SE" and NOT to your authorized dealer/seller of the Cisco.

  The new materials are planned for mid - to end-2015.  That's all what I can say with respect to the subject of what is going to replace the venerable 5508.

  Now, the time to strategy.  Cisco SALES' mantra since always this: IF, for example, the 5508 announced today, users have about three to five years to find financing to replace them.   Here's the deal: the wireless IOS, not aircraft operating system, does not do well.  Not at all.  So that alone dictates the WISN/5508-2 is going to be around for a few years.

  Now, your biggest concern isn't when the EoS will be announced to the 5508/WISN-2.  Your biggest concern is your APs.  Have you read / seen the Release Notes for the firmware 8.0?  All APs 802.11 g only, as the 1130 and 1240, will be NOT permitted features 8.0.  They can join a controller with firmware 8.0, but they will have no 8.x features enabled.  So my hunch is this: the next major release, perhaps 8.1, all non - CleanAir APs, such as the 1040, 1140 won't 8.1 features enabled and the list will light.

• Migration 1240 APs from a controller to a new controller

  Hi guys,.

  I want to install a new controller 4404 and I just want to move the access points that are associated with my current controller to the new controller once installed.

  The plan is to change the DHCP server once my new WLC is ready and change address IP 43 option of the old controller to the new controller. This seems simple enough for me.

  BUT,

  I know that flash LWAPP on the AP sometimes gets stuck, and all access points are drilling above the ceiling and would be a nighmare to lower the ceiling and console in each of them.

  If at the initial plan of simply by changing the option of server DHCP 41 in the new work of WLC IP address OK, or do a big risk for getting low ceiling tiles and all that jazz?

  Please can someone advise me?

  Thx a lot indeed.

  Ken

  Hi Ken,

  First of all, if both controllers to run the same code, there is no program flash. Yet, the APs tend to remember the previous controller, that they were connected, so you might see APs taking time Looong to join the new controller, but they are expected to join later in any case.

  Some other ways to do it:

  -my favorite: Add the new controller to the same group of mobility than the first and let them know each other (add each IP and MAC controller to another). Then define this new controller the PDC on all points of access, restart them.

  -Variant: If you use WCS, use a model to push the APs for the new controller.

  -If you change the controller, set up a new one with the same IP addresses as the old (and of course to remove the old before you plug in the other).

  -You can also put one of the APs in the same subnet as the other and use OTAP for others to join.

  Don't forget that option 43 is just one means, among others, for the AP to the discovery of controllers as much as she possibly can before choosing which is best to join. Change option 43 will not remove the info on the former Comptroller of the memory of the AP, then it might be more effective to push toward the new more gently... but the technique 43 option should work even when...

  HTH

  J

• The 1142n controller code

  Just got some 1142n points. We have a controller 4402, but also a WISN. All controllers are running 4.2.176 code. I know, I need to run code 5.2 to the 1142n support. There are currently two versions of the posted 5.2 code. 5.2.157 and 5.2.178. I thought keeping the WISN 4.2 code and just upgrade the controller 4402 5.2 code to support APs 1142n. The 4402 controller is in a group of mobility with the WISN. If I run mismatched version code is it best to break the 4402 to its own group of mobility or just ensure that the APs on the 5.2 4402 have never the WISN as a secondary residence.

  I was under the impression that 5.X code was not stable enough to start production. With the 1142 s, we have little choice. Is stable enough to operate on all the controllers of 5.2 or do I have to wait on that for the WISN.

  It should be good. If you have problems, you can always restore your FW.

  Make sure that you run also true bootstrap (4.2.112.0) emergency release version plus (5.2.157.0 ER).

  The difficulty of your case is when you run the new codes on a WLC in order to support the PA 1140, what will happen if this controller fails? The AP would find the next controller and unfortunately it runs an unidentified code then 1140 would probably go... nuts?

• Problem upgrading controller 4402

  I've updated all our 5508 controllers without problems, but when I try to upgrade our controller 4402 I get error "Failed storing Flash TFTP!".

  Tftp tried different programs including the tftpd32 and tftpd64 on the local network.

  The current Firmware is 7.0.98.0 update to 7.0.240.0

  I looked for answers, but everyone says to use tftpd on LAN which I do.

  Update *.

  Even if copied to the controller and extracted firmware, it seems that my error was due to a corrupted file.

  I downloaded the firmware again and it worked successfully.

  Thanks sprocket, is that simple, repeated measures for each file.

  Tell me, I just download the TFTP file and I see the message on the controller, is - right below? Should I just wait to complete the installation?

  "TFTP receive full... extraction of components."

• difference between the operational status of APs to the TOP and REG (registered)

  Hello guys,.

  I want to know what is the difference between the operational status of APs to the TOP and REG?

  Thanks in advance

  A radio operating state is up/down.  REG AP means that the PA has joined with success the controller.  The AP must be in the State REG (registry) radios appear.

  -Scott

  Please evaluate the useful messages *.

• 5508 controller

  Having a problem with Apple Airplay, that I'm not sure whether or not our 5508 controller is the culprit. We have several Apple TV devices on our network. No Apple device can detect the Apple TV via AirPlay. Wireless to the devices themselves are good, but the communication between the two is not working.

  Well it will just work, there are some things that need to be configured on the side and wireless.  Here are a few documents that should help you:

  http://www.Cisco.com/en/us/products/HW/wireless/ps4570/products_tech_note09186a0080bb1d7c.shtml

  http://www.Cisco.com/en/us/docs/wireless/technology/Bonjour/Bonjour_Deployment.html

  Thank you

  Scott

  Help others by using the rating system and marking answers questions as 'response '.

• 5508 controller & redundancy network/path

  I read in other threads that it is possible to use several Interfaces AP (disabled LAG) and have a port connected to a switch and the second trunk port connected to a second switch, with two switches in question connected with each other and running HSRP (our two 6500 hearts). My understanding on 5508 controller is very limited and I have just thrown into this, because it is a "high priority" project and is said today to sketch something for a meeting later, but if I connect it all together, it's then not create a loop? I guess my question is, is the data/network traffic through the 5508 in a trunk (port1) to another (port2) and I'll finish by fighting errors on my carrots, that data would be to pass a downlink of reference1 to port1 (for example), then again down port2 and on another soul?

  I read through the version 6 of the document as we speak, but it is not particularly clear on the delivery of the goods.

  Thank you!

  Alan

  Correct... you cannot divide ports if the WLC is configured for LAG.  For your use, with 6 AP, then Yes, I don't see why using a port connected to different switches will cause performance problems.  If it is a trial and you later decide that you will have 2 WLC, then connecto a swithc and develop WLC to the other switch and use LAG.

  Scott

• Satellite Pro M70 - ist is possible to change the craphics controller?

  Is it possible to change the graphics controller to my Satellite Pro M70...
  If so, where to buy a new one?

  THX

  Hello

  Well, in general it s is not possible to replace or update the graphics card.
  But I compared a Satellite Pro M70 unit because this series of laptop was delivered with different hardware configurations and I found that these installed graphics cards:
  Mobile Intel 915GM Express Chipset AlvisoGM 8 MB to 128 MB shared video memory
  ATI MOBILITY RADEON X600SE 128 MB of video memory
  ATI MOBILITY RADEON X 700 256 MB of video memory

  However, in my opinion you can not change the graphics card

• migration assistant for only the user folder

  I'm helping a student who left a Time Machine backup College but suffered a hard disk failure in his MacBook Pro here. We can't clone or make a backup hard drive TM or run the recovery partition. All we could do was to copy the user on an external hard drive folder.

  Apple replace the drive under warranty and installation of system software. When we reboot the machine that is repaired, we will be able to use setup assistant/migration assistant to transfer the folder to the user as it will not be recognized as another backup Mac or MC? Otherwise, what is the best way to get it on the laptop and recognized as a user it?

  (She needs to work on its data before returning to the University is not an option to wait until she is back with his backup TM)

  As far as I know the Migration can be done with just the folder of the user. What I would say is that you copy the text of the drive backed up by a folder. In other words, open the two folders of Documents and copy the text from the backup folder of Documents to the Documents from the computer folder. This, for everything except the library. Most of what is in the library will be restored as the computer is reconfigured and the applications are put back in place.

• Satellite 2710 XDVD: the graphics controller hardware specification

  Can someone tell me about specific electrical equipment of the graphics controller (manufacturer, type, etc.)?
  And what kind of changes are in the BIOS version 7.60?
  Can I install more than 192 MB of RAM?

  Thank you very much

  Post edited by: philips

  Hello

  in the specification of this machine, I found that there a Trident Microsystems Cyber 9525 graphics card.
  And he says that the laptop can not use more than 192 MB of RAM.

  Good bye

• Satellite C660-117 - where to download the Ethernet controller driver?

  Hello.

  Can someone please help with my laptop? Here's my laptop specs:
  Model: Toshiba Satellite C660-117
  Part number: PSCOLE-00Y00JEN
  Serial number: XA458343K

  I have just rewiped my laptop with Windows 7 Ultimate. I use the laptop on a wireless connection. In Device Manager, I have an exclamation mark next to the Ethernet controller. This prevents me from going online.

  Can someone direct me please the link to download some driver I need?

  Thank you much much in advance.

  Dennis.

  Hey Buddy,

  Controller driver Ethernet can be both: WLAN or LAN card. All the drivers and tools can be downloaded from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  You have installed Windows 7 Ultimate, but may I ask why you haven t used the Toshiba with Windows 7 Home Premium recovery disc? On this disc are all the drivers and tools are installed because it s a picture of factory for you don t have stress with driver and installation tool.

• Satellite A100-773 - how to install the Ethernet controller driver?

  Hello

  I reinstalled Win Xp Prof on my satellite A100 - 773 (PSAA9E) and have a problem with the Ethernet controller. In Device Manager, the controller is marked with a yellow '?'.

  I use this driver http://de.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=DE&selCategory = 2 & selFamily = 2 & selSeries = 153 & selProduct = 624 & selSho rtMod = 444 & language = 17 & selOS = 10 & selType = all & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 12 & electedLanguage s = 17 & type = all & page = 2 & ID = 55434 & DISO = 1 0 & driverLanguage = 42

  Install it on the Device Manager and right click on ethernetcontroller - installation driver. This is the message that no driver is found (in the right! folder) nothing can be installed...

  I also remove ethernet controller, so that windows automatic reseacht for this, but nothing works.

  I don't know what I can do

  PS: Chipset utilities are installed

  Hello

  I can post a link where you can download the driver but I put t know what driver is missing now. Do you mean the WLAN or LAN card? What is the device?

  Please check the vendor and device ID to identify which device needs a driver. Go to Device Manager > right click on Ethernet controller > properties.
  There you should find some information like PCI\VEN_xxxx & DEV_xxxx
  With these codes you can look here to identify the device: http://www.pcidatabase.com/

  After this verification, the page of Toshiba to download a driver.

• Upgrading the graphics controller on Satellite A30-404

  I have a Satellite A30-404 with a relatively weak Intel® 852GME Graphics controller, some people say that you upgrade this computer laptop isn´t possible since the graphics controller is onboard, but after some research on www.intel.com I came to the conclusion that this chip after all is not onboard but is a slot to order ATI or Nvidia a better graphic chip trough. but iam still not sure if the chip is integrated or not so I wanted to know if this is possible

  Hello

  On the net I found detailed information on the graphics chip:

  Intel 852GME graphics controller
  Montara GT code name
  Yes engine 2D
  Yes 3D engine
  64-bit memory data Bus width

  But as far as I know it s not possible to update the graphics card.
  If you want you can ask to view ASP.

  Good bye