Migration PeopleSoft of DB2 UDB (LUW) DB2 z/OS, database and perform the upgrade of Application

Similar Questions

• Need to find a way to understand how DB2 connect to Oracle and mirroring of data etc.

  Hi, gurus,

  I just take over a source project which is the ICOMS as400 db2 database. Seems data mirro that CDC is used to replicate from DB2 to oracle.

  I am very new to this CDC datamirror, more I am new to figure out how db2 connect to oracle, it is only through db link or what? or is it tnsnames entry?

  I wish someone in this forum can point me in the right direction.

  Thanks in advance.

  Hello

  What do you not sure about?
  If Oracle can be the site of conduct, you can use the gateway for DRDA database and we can help you with that. If you need assistance on setting up DataMirror CDC to connect to Oracle, then you will need to contact IBM because it is one of their products.

  Kind regards

  Mike

• failure of migration on wifi. error message. programs do not work. anyone else having the same problems?

  failure of migration on wifi. error message: migration quit unexpectedly. Apparently, the migration is yet complete, but with a lot of mistakes. many programs on the new computer do not work. anyone else having the same problems? never had any problems with apple before. Maybe it's my last mac.

  Migration via wifi is a bad choice, physically connect the two PCs with an ethernet cable is the best solution. Start the computer in recovery (command-R) and erase the boot partition. Then reinstall Mac OS X and migrate again using ethernet. Some programs such as MS Office may still have a problem and need to be reinstalled.

• Performing the migration of the first deployment of Collaboration CUCM and IM + P again

  Hello

  We used the server first deployment of Collaboration to create virtual machines, run the upgrades and migration of 9,02 10.5 CM and IM + P.

  The migration was properly executed and CM and IM + P came as a cluster.  We could save phones and test.

  These servers are not in production.

  Can run us the migration task to these servers to update their information?

  No, you will need to remove these servers and run the migration all again.

• How can I migrate JUST a BONE from a HARD for one SSD drive, by the way, the HARD drive is a laptop and I use the SSD on a new office, I just built.

  I tried to start with my computer desktop laptop HARD drive, which of course, did not work.

  and I can't connect several hard drives or SSD for my laptop, how do I migrate JUST windows 7 and not the rest of my hard drive to my new SSD?

  Install Windows 7 on an SSD will require a "clean install", using your original Windows 7 installation DVD.  Please review: Windows 7 and SSDS: secrets and tweaks of the development of installation

• I installed Windows Live Mail and now am trying to migrate mail from my laptop which has been using Vista and Windows Mail.

  I just bought a new desktop computer using Windows 7.  I installed Windows Live Mail and now am trying to migrate mail from my laptop which has been using Vista and Windows Mail.  I need help please.

  The Vista system export your contacts and send to CSV files, then import them into Windows Live Mail.

  Good luck.

• Migration has erased my Adobe CS5 and now the serial numbers does not work to reinstall

  CS5 Web Premium worked fine on El Capitan until I migrated.  Then he gave me the screen to enter the serial number of my product or purchase.  I entered the serial number and he said that it was not valid for this product.

  I spoke with a representative of Adobe yesterday who gave me a link to download the suite again and use my serial number to activate.  I downloaded it 5 times and every time it says installation file is corrupt and eject the disc.

  I spoke with a representative of Adobe a few minutes ago and he informed me that I can't contact a representative directly on my problem and I had to come here to get answers.

  Remarkable software.  Questionable tech support up to this point.

  Does anyone know how can I do in order to get CS5 running again?

  Thank you.

  Here's my chat with an agent of Adobe yesterday:

  ...

  Malick: You want to activate the product, correct?

  Malick: We are still connected?

  Jennifer Davis: Well, I had a product that has already been activated. Then I upgraded to El Capitan and migrated my old files on and now it gives me a screen of Adobe Photoshop CS5 Extended Trial. I have my serial number.

  Malick: Please provide the product serial key.

  Jennifer Davis: (provided serials)

  Malick: Please allow me 1-2 minute (s) review the details of your account.

  Jennifer Davis: OK. Thank you

  Malick: Jennifer, you pull a software license option?

  Jennifer Davis: Your file was uploaded successfully: Screen Shot 2016-07-30 at 7.07.13 PM.png.

  Jennifer Davis: I'm not sure what you mean. I sent you a screenshot.

  Malick: Jennifer, the key to this series is of Adobe Web Premium cs5

  Jennifer Davis: Yes

  Malick: and you have downloaded the wrong product is photoshop

  Jennifer Davis: I don't understand.

  Malick: Jennifer, I provided you a link please visit the link and select Adobe Web Premium link

  Malick: then downlaod it and launch it and use serial keys accordingly

  Malick: https://helpx.Adobe.com/Creative-Suite/KB/CS5-product-downloads.html

  Jennifer Davis: OK. This should restore my activation?

  Malick: Please uninstall the previous

  Malick: and then install it

  Jennifer Davis: Where should I go to uninstall?

  Malick: product launch go to menu help-click Disable or disconnect

  Jennifer Davis: I can not launch the product because it goes right to the screen right, I emailed you.

  Malick: Alright

  Malick: then click on the product

  Malick: Sorry link *

  Malick: and download the product

  Malick: Select Adobe Web Premium link

  Jennifer Davis: Also, it will interfere with my installation of Creative Suite CS4? I noticed that I can not open Photoshop CS4 now because it goes to CS5 rather.

  Jennifer Davis: I am the download link now.

  Malick: No, it won't create any problem with cs4

  Jennifer Davis: When I click to open CS4, need me the same screen that I sent you.

  Malick: This link is cs5 and serial key is also cs5

  Jennifer Davis: Yes, but when I open any CS4 product that has also a CS5 of the same product, it does not open. Need me this same screen CS5.

  Malick: Jennifer, cs4 is produced different.

  Malick: Can you provide a serial CS4 key

  Malick: ?

  Malick: 

  Jennifer Davis: I understand that CS4 is a product different from CS5. It is also a separate issue I mention.

  Malick: Please provide cs4 serial key.

  Jennifer Davis: I download the CS5 link you sent as we speak. I insert the serial number for this product once it is downloaded. 

  Malick: Alright, so should I stay connected?

  Jennifer Davis: However, I also have the question of where to uninstall the CS5 Web premium. I can uninstall each component in the file by using the backout package. 

  Jennifer Davis: Yes, please.

  Jennifer Davis: A new question, which I have, is that I can not open my CS4 products if it also has a CS5 of the same product. For example, I can't open Photoshop CS4 because I have photoshop CS5. 

  Malick: No, there should be no problem with cs4.

  Jennifer Davis: When I click on Photoshop CS4, it opens the screenshot I sent you earlier.

  Malick: Jennifer, to check your question I need a serial key of cs4 please provide me with the serial key.

  Jennifer Davis: Where can I find?

  Jennifer Davis: As a side note, I found out where to uninstall them CS5.

  Malick: There is no cs4 in your account

  Malick: You have any alternative e-mail?

  Jennifer Davis: I don't think I ever recorded. Where can I find it on my computer?

  Jennifer Davis: (e-mail supplied)

  Malick: No, it's no cs4 under him only acrobat and cs5 is here

  Malick: You have the invoice of the product?

  Jennifer Davis: Nope. I got it for several years, however. I check with my husband now.

  Malick: well, let me know

  Jennifer Davis: Your file was uploaded successfully: Screen Shot 2016-07-30 at 7.39.57 PM.png.

  Jennifer Davis: Also, for some reason any download from the link you sent me stopped and said that I didn't have the permission to return to so I had to restart.

  Malick: Please restart him.

  Jennifer Davis: Since approximately 08-09

  Jennifer Davis: I had CS4 since about 2008-09.

  Malick: Jennifer, without serial key that I can not help you need to provide the invoice if you need of a serial of cs4 key

  Jennifer Davis: Is not on my computer anywhere.? Some programs work and some aren't.

  Malick: Jennifer, without serial key is not possible to provide any information

  Jennifer Davis: I understand. But what I'm asking, is to find the key to series on my computer since I was still a bit of the product operation?

  Malick: No, you can't find serial key system.

  Jennifer Davis: is there any other information that could lead to my serial key?

  Malick: We can help you if you have a valid invoice of the product.

  Malick: or you must contact your dealer for advice

  Jennifer Davis: Okay. So, how can I get my CS4 products rerun?

  Malick: Jennifer, please contact your dealer regarding this issue.

  Malick: You have downloaded cs5?

  Jennifer Davis: thank you very much for your advice, but that was more than 15 years ago. I have no idea who my dealer was.

  Jennifer Davis: , I'm working on CS5. He has 41 minutes go.

  Malick: Jennifer, I'm leaving your case contact us view file number 0219302274

  Malick: and please follow the instructions I provide allows you to install cs5

  Jennifer Davis: Okay. Thank you.

  Malick: If you encounter a problem, please contact us abck.

  Malick: Thanks to contact Adobe.  We are available 7 days a week, 24 hours a day. Bye!

  Tell everyone you know who owns a Mac, including Apple employees... Migration of Mac and Time Machine NOT FUNCTION correctly with the Adobe program activations due to hidden folders are not included when Migration or Time Machine make their copies

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

  Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  - and more help in http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html

• My computer crashed and after the purchase of another, I used the Migration Wizard to copy all the files to the new computer.  Everything was going well until I tried to launch LR6.  It was two weeks ago and a search for many pages of the Adobe Web site. 

  My computer crashed and after the purchase of another, I used the Migration Wizard to copy all the files to the new computer.  Everything was going well until I tried to launch LR6.  It was two weeks ago and a search for many pages of the Adobe Web site.  I think I've exhausted all the remedies listed without success codes error A12E5 to questions cloud creative, Manager of Application and error 1: Configuration problems.  I'm ready to reformat my computer and try again with Time Machine.  Help would be greatly appreciated before I waste more time on this task. Any further suggestions?

  Migration of Mac with Time Machine WILL NOT WORK with the Adobe program activations due to hidden registration files

  Sign out of your account... Uninstall... to run vacuuming...

  -non-Cloud programs, to disable the service before uninstalling

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and before reinstalling is often necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account... Reinstall

• Migration DB Manager updated and reinstalled the plugin works only half

  Has decided to migrate my db update today to a sql server Manager, we virtualized.  Everything went pretty smooth.  I had to reinstall the plugin due to a new certificate running if after doing all this and reconnected all the plug-in loaded correctly.

  When I go to analyse if I let 'patches and extensions' and 'upgrades' checked the plugin breaks and I have to wait a bit and reactivate it.  If I just scan for 'patches and extensions' it works fine and if I just scan for "upgrades" it breaks.

  My SQL DBA says I can only hit a database and no other connections try to do, but maybe we missed something?

  Someone had a problem like this before?

  Thank you

  VMware, called today and basically just had replace me my database as the patch taken in charge.

• I recently used Migration assistant to transfer to a new macbook pro and when I try to use Photoshop I get an error message telling me to download and install App Office creative cloud so I didn't and it launches the application craps out and gives the sa

  I recently used Migration assistant to transfer to a new macbook pro and when I try to use Photoshop, I get an error message telling me to download and install App Office creative cloud so I do and it begins to it out craps and gives the same message over and over.

  Hi Paul,.

  Migration wizard does not work in the case of Adobe applications.

  Please, try the following steps:

  • Uninstall Adobe CC (Creative Cloud help |) Uninstall the creative Office Cloud app)
  • Reboot the computer.
  • Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop

  Kind regards

  Sheena

• I recently installed the trial version of Adobe CC a few programs on my old 'C' drive instead of my new drive "F". The old 'C' will drive disappeared after as I migrate and get the new 'F' drive at the speed. What should I do?

  I recently installed the trial version of Adobe CC a few programs on my old 'C' drive instead of my new drive "F". The old 'C' will drive disappeared after as I migrate and get the new 'F' drive at the speed. What should I do?

  Hi Dan, try to run the cleanup (helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html) tool to completely uninstall CC to your computer, and then reinstall the desktop app: creative.adobe.com/products/creative-cloud

• After the migration of ESXi 4.1 to 5.0 Update 1, ESXi containing the missing data store

  I intend to upgrade to an ESXi 4.1 production host, but I want to run through an upgrade of test on a separate machine. I created this using a virtual machine and the upgrade went well. However, now when I insert my vSphere client, I don't see the data store that contains data to my VM.

  Before migrating to 5, I had 2 drives, a disk of 4 GB for ESXi, and a 40 GB drive for the data of the VM installation. I could see and access times stores via the 4.1 vSphere client, but once the upgrade only the VM data store is available. Is there a reason that this is the case?

  I've updated but has not changed the partitions of data store. I have selected to migrate and keep the VMFS store, which was VMFS-3. I also tried to add the store drive 4 GB with the customer data, but an error message: "the selected disk already has a vmfs data store or the host cannot perform a conversion of partition table.
  Select another disk.

  I found this article on error message: http://KB.VMware.com/kb/2000454 , but I never actually removed from the data store. With the help of the 5.0 ESXi update I can see the VMFS store on 4 GB drive, which should have about 3.2 GB of available disk space (the rest being used by the hypervisor).

  Recommended someone else try esxconfig-volume - the list, and then use the output to a mount (http://communities.vmware.com/message/1666168#1666168), but the list command had no output at all.

  I searched through the forums and Google but you saw nothing.

  ESXi 5 has a different architecture, and I think that the problem is the size of the disk (too small) and the partition of scratch required.

  Have a look here:

  • http://pubs.VMware.com/vSphere-50/topic/com.VMware.ICbase/PDF/vSphere-ESXi-vCenter-Server-50-installation-Setup-Guide.PDF (page 153)
  • http://communities.VMware.com/message/1848769
  • http://KB.VMware.com/kb/1033696
  • http://blogs.VMware.com/ESXi/2011/03/OPS-changes-part-5-scratch-partition.html

  HTH

  Sam

• I just bought a new iMac and used the Migration Assistant to transfer my files. At first everything worked, but now a week later, I get the message that the application manager is missing, and I can't Photoshop and InDesign to start. I don't want t

  I just bought a new iMac and used the Migration Assistant to transfer my files. At first everything worked, but now a week later, I get the message that the application manager is missing, and I can't Photoshop and InDesign to start. For my personal use, I don't have a need to reach creative Cloud. You have any suggestions for a workaround?

  Try installing Adobe application Manager down the link and check

  Adobe - Adobe Application Manager: for Macintosh: Adobe Application Manager: thank you

• 30EA2 - No. databases available at the stage of Capture with the MS Access Migration

  I am trying to import an Access 2007 database by using the Migration Wizard. But when I get to step 5 (Capture), no database is listed in the section 'Available databases'. I have created a connection to the Access db and can see objects in ot of SQL Developer.
  
  What Miss me?
  
  Can I use the SQL Developer Microsoft Access exporter to create the desired files. But I do not know how to integrate this into the process.
  
  It seems the only available migration technique is to click on the MS Access connection and then click on "copy to Oracle.
  
  I use SQL Developer 3.0.02 and MS Access 2007 (although I tried with MS Access 2000 as well).
  
  Published by: KenDoesntKnowItAll on 20 December 2010 13:36

  Hi Ken,

  Cradle of the last sheet code developing sea jan 12 - in my view, there is little or no substantive changes required for the release of the adopter later than at the beginning.

  1/create and populate/associate one repository: connection (with sqldeveloper specific tables)
  Create the connection to the new schema
  Right-click on the connection-> rtepository-> associated migration reposiory Migration
  2/create a login for the online move data
  3/create a destination oracle schema
  4/kickoff of the exporter:
  Tools-> migration-> Microsoft Access exporter-> (choose the version)
  The Microsoft Access exporter you choose Exit to SQLDeveloper (which is
  -a xml for the metadata file and
  -possibly move the dat files for the data in the table offline)
  and you can choose the microsoft access file
  -the access file you need to modify the access file to allow access to the metadata needed to create the xml file: see before the migration of Microsoft Access Help.
  5 / the kickoff of the wizard
  Tools-> Migration-> migration->
  in the wizard
  Then-> choose repository-> then connection-> the name of the type on the top and a new directory (or a directory previously used for this purpose) on the bottom, it's a base directory for example creation generated script output and possibly given offlline move scripts-> next-> offline, choose your xml file created by the Microsoft Access exporter (it must filter down xml files to make visible the xml files (, the file selector)-> then-> (note contains selected databases ) next-> then->
  Choose the destination oracle schema
  [I guess it comes to your own instance of XE small scratch - otherwise, you'll need to make sure that you grant privileges to this scheme, in my case that a schema has been created, called ]
  [suggest drop oracle targets option if you've run through it before]
  -> datamove online, choose source (access) and the destination schema (oracle)
  [suggest data truncated if you have lived this before]
  -next-> finish

  This kicks off you could get errors in the cmd window you launched it in by
  CD sqldeveloper\sqldeveloper\bin
  . \sqldeveloper
  or in the logging pane.
  There is a .sql file generated (a subdirectory off) the output base directory.

  (1) SQL Developer 3, I don't see the possibilities to specify one file, xml or otherwise, during the migration Assistant before step 5. Can you be more specific on where you're talking about choosing a file?

  ("To pick up in access file is an .xml file of the exporter instead of a .ocp file (you must change the file type in the file dialog box) (the main file seems to default to the .xml)" ")

  You can choose the option offline (as indicated in the instructions above), which will then choose a file (by default .ocp but a .xml filter files is also available)

  -Turloch
  Team SQLDeveloper

• IBM DB2 as external database for device and Windows based Server vCenter vCenter?

  IBM DB2 AS DATABASE EXTERNAL TO VCENTER DEVICE AND WINDOWS BASE VCENTER SERVER IS SUPPORTED OR NOT?

  Post edited by: a.p. - updated the title (in capital letters)

  You will find an overview of the databases supported at http://partnerweb.vmware.com/comp_guide2/sim/interop_matrix.php by selecting "interoperability Solution/database.

  André