Migration vCenter database of the local instance to a remote server
Hello
My vCenter database is installed on the local server with the vCenter server. When installing without DSN was created because the local database. Now, I need to create a dedicated server to host the database but can't find where, in the current installation, I would like to change to vCenter point to the new location.
I read these KBs
KB.VMware.com/kb/7960893 - movement of the SQL Server to vCenter database
KB.VMware.com/kb/5850444 - migration vCenter Server on a different host machine
KB.VMware.com/kb/1003928 - troubleshooting the database data source used by the VirtualCenter Server
Problem is that (1) there is no DSN, (2) the registry key is not there either, and (3) I cannot find what to change in the vpxd.conf file
I am able to "migrate the database" and "can create a new dsn to point to the new location.
So, the question is where can I find the current configuration of the database\dsn.
I hope that's clear
Hi VMGenie,
The reason why it does not appear THAT DSN u is because your machine VC can be 64-bit and the vCenter uses 32-bit DSN settings.
Open the C:\WINDOWS\SysWOW64\odbcad32.exe folder for this exe... it should show u the DSN settings.
Please consider clicking correct or helpful if this information is useful.
Tags: VMware
Similar Questions
-
Hi, I'm a newbie to Vcenter. I just found out that I am not able to connect to the vcenter installed on the local host after restarting the Windows 2008r2
Hello Cy1989,
Check the items below in your vCenter server.
1. check that VMware VirtualCenter Server service is started otherwise starts pls start...
2 Vefiry VMware VirtualCenter Management Web Services is started otherwise start pls start...
3. check that the configuration of the ODBC Data Source (DSN) used to connect to the database for vCenter Server is correct.
4 Vefiry database are running and all required database services are running...
-
How to use refcursor type returned from the remote database in the local database
Can anyone say is how they use the refcursor use type returned from remote database in the local database using dblinks.See MOS ID 750126.1 doc ORA-24338 when trying to return a Refcursor over a database link.
-
Re: migrate our database of the ERP of Solaris Sparc 64 to Linux x86_
Hello
We migrate our database of the ERP of Solaris Sparc 64 to Linux x86_64.
Please suggest a few docs.
Kind regards.I assume you're on R12 since you want to migrate the crux of application layer for 64-bit Linux (which is certified for the node on R12 but not 11i application layer), so please refer to the documentation on this topic - Re: someone at-migration/upgrade R12.0.6 on Solaris to R12.1.3 on Linux?
Thank you
Hussein -
Copy the packages to the database on the local computer
Hi all
Y at - it Anyway to copy all the packages in the oracle database on the local computer? I have a lot of packages I need to take a backup every time, but I don't want to spend a lot of time to open each package and save on my computer.
Please advice.
Thank you
KKallround automations product?
There is an export of the objects option in the Tools menu.
-
script to find the local TSM and TSM remote is activated on the esxi host
Need to generate scripts to find on which esxi host in the vcenter is enabled for Local TSM and TSM remote...
Hello, nareshunik-
Thanks to the handy Get-VMHostService cmdlet, you can quite easily get this info:
Get-VMHost | Get-VMHostService | ?{"TSM","TSM-SSH" -contains $_.Key -and $_.Running} | Select VMHost,Key,Running
The result is something like:
VMHost Key Running ------ --- ------- myHost01 TSM True myHost02 TSM True myHost05 TSM True myHost05 TSM-SSH True
TSM is the local service of TSM or "ESXi Shell", and the TSM - SSH service is "SSH". How does do for you?
-
Migration of the APEX data to the local instance
Hello
I want my data in all the tables in my schema exported from the apex.oracle.com app and imported to another local instance, on a regular basis. Utility-> data loading/unloading feature Apex provide this functionality via XMLs but the process is manual and needs to be done table-wise and not schema-wise. I'm not sure of the CREATE DATABASE LINK function in this case, can it be useful? No other work around? Help, please.
Thank you
MaryHello
Yes, he is always there - I just tried. Are you clicking on the link or copy and paste it in the address bar? Sometimes, if you do this, you get leader / characters.
Andy
-
How to change vCenter database from the default location to another drive?
Hello
I installed vc with sql 2005 express, now my vCenter server c:\ is almost full
is it possible to move my vCenter database to a different drive
concerning
Maniac
It's really interesting!
Please try with a graphical interface. Right-click the DB-> tasks-> out-> select 'Drop connections.
Then "Check" "Drop Connections" and click OK.
Share the results...!
See you soon,.
VJ
-
Problems using the local test on a Mac server
I defined a local test for my website server: connect you using Local/network; file server: / Users /... / FPPATesting /; Web URL: http://localhost/FPPATesting/; For model server: No. The site is hosted on a server of InMotion.
I see that my local server folder was automatically filled with site files, but there are many missing, although the index.shtml file is there. If I drag the index.shtml file in the test folder in the field URL of Safari, it shows pretty much as it should, except that my Include files were not loaded. the Include files are in the folder test, but they aren't repeated. I get the same result if I choose Preview in Safari. And in this case, the files are all taken from the test folder; If the test server seems to be recognized by Dreamweaver.
Curiously, if in the test folder, I open the file index.shtml, in Dreamweaver, Live View in Dreamweaver displays a seemingly complete site - almost. It is not complete because there not all the image files for the site. But the Include files have been included.
So my problem is from my test server. I thought that call for a preview in one of the browsers show me the full site. Would it because I chose a server model "None"? I didn't know what else to use, as I am not including any content database. What should I do now?
This can help working with server-side includes in Dreamweaver.
-
How to reset the Local administrator password in Windows Server 2008
Original title: reset Local Administrator
How can I reset all my password of Local administrator using a GPO on windows server 2008
Hey isaberthe,
Just for future reference, all the problems of Windows Server goes to TechNet forum. Microsoft Answers support only consumer related research. You can find professional support services in TechNet forum.
Here is the link from TechNet:
Windows Server forums
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Is faster than the local AIR IOS app remote SWF SWF because I can ' t use the unloading code.
Are faster than the local SWF on AIR IOS app remote SWF because I can't use the code to unload on IOS of AIR.
my local code:
Stop();
import flash.net.URLRequest;
import flash.system.ApplicationDomain;
import flash.system.LoaderContext;
import flash.filesystem.File;
import flash.filesystem.FileMode;
import flash.filesystem.FileStream
go_level_2.addEventListener (MouseEvent.Click, Level_2);
function level_2(event:MouseEvent) {}
var loader2:Loader = new Loader();
var loaderContext2:LoaderContext = new LoaderContext (false, ApplicationDomain.currentDomain);
var file2:File = File.applicationDirectory.resolvePath ("level2.swf");
loader2. Load (new URLRequest (file2.url), loaderContext2);
addChild (loader2);
}
Because it works for me, because I can't unload the SWF app file en becomes slow, I'll put the SWf file "s on a remote location.
But I can't imagine what is happening when I loaded the SWF file remotely. It remains on the server, or it remains on my application when I unloaded it, and the app gets also larger. I hope you can help me because I went on the internet for a week and do not now how to go further.
I had a similar problem, but not on iOS.
Maybe my solution might work for you too, however.
The problem was this line:
new LoaderContext (false, ApplicationDomain.currentDomain);
Do not reuse the same field of application, or you will never be able to get rid definitions and thus the SWF loaded.
Instead, make a new child application domain for the current domain, keep track of it and it has as well as the rest of the SWF file when you are finished.
Example:
var loader2:Loader = new Loader();
var appDomain2:ApplicationDomain = new ApplicationDomain (ApplicationDomain.currentDomain);
var loaderContext2:LoaderContext = new LoaderContext (false, appDomain2);
var file2:File = File.applicationDirectory.resolvePath ("level2.swf");
loader2. Load (new URLRequest (file2.url), loaderContext2);
addChild (loader2);
Then
function finishLevel2(event:Event):void
{
var loader2:Loader;
loader2 = Event.Target.Loader; loader2.parent.removeChild (loader2); loader2.unloadAndStop ();
appDomain2 = null;
}
Note that the definitions of the classes of the loaded SWF file will be available in the new application domain.
-
Cannot share local printer with a remote server via RD?
I'm on Server 2003 at both ends of that connection. The local printer is a network printer in my office.
Research on the Internet gives to think I should be able to go to Remote Desktop-> Options-> local resources and enable printer sharing by clicking on the "Printers" box under "automatically connect to these devices the when connected to the remote computer.
However, this doesn't give me access to my local printer when I'm in a remote desktop session. What Miss me?
http://TechNet.Microsoft.com/en-us/WindowsServer/default.aspx
Repost nicely in the Forums to correct server at the link above.
Here is the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
Load the Web site to a remote server in Dreamweaver CC 2015
Dreamweaver CC 2015, what are the steps to load your site (folders and files) to a remote server specific? I've already implemented the information on each site server. And I am able to connect to the remote server. I just can't understand how to load the sites on the server.
Thank you.
Hello
Please see the links below which explains how to define a site, server and how local files to the server.
Publish your Web site. Adobe Dreamweaver CC tutorials
https://helpx.Adobe.com/Dreamweaver/how-to/publish-manage-websites.html
Please do not hesitate to get back to us if you need help for the same.
Concerning
Vivek
-
Multiple databases on the same Instance SQL vcenter
I know that this is possible, my question is for the cumulative jobs created specfic (I think during the schema updates).
I asked our DBA to create a vCenter Lab DB and a Lab DB update on our SQL2008 Server Manager using the scripts described in the ESX and vCenter Server Installation Guide (I'll use new unique Lab DB names and Lab DB SQL users). This SQL server instance already has a production DB, and DB Manager production update vCenter.
My question is what is happening with the schema updates when I leave the installation of the laboratory to the schema updates.
- I should do something before installing vCenter to avoid potential conflicts on the side DB?
- Will be the schema updates are trying to recreate the jobs of rollup and fail, breaking existing jobs, or something else?
I'm looking for good practices so that when I install the lab, the environment of existing production DB (including rollup jobs) are not affected and cumulative Lab new jobs are created to function properly.I'm not a DBA, so if I'm far away feel free to correct me.
The installation creates the names.
- I should do something before installing vCenter to avoid potential conflicts on the side DB?
-
need to understand the administration of the database on the local computer at home
I loaded Oracle 11 g EE at home and it works well, but I'm not too familiar with administering a d.b.
I try to install The Express Applicationand need to know where to put things, etc.
I so need to run the following command to install the APEX and have a few questions...
@apexins.sql tablespace_apex tablespace_files tablespace_temp images
Example: @apexins.sql SYSAUX SYSAUX TEMP is
tablespace_apex is the name of the storage space for the user of the Oracle Application Express application. - I should just do this USERS?
tablespace_files is the name of the storage space for the user to Oracle Application Express files. - USERS?
tablespace_temp is the name of the temporary tablespace and tablespace group. - TEMP?
images is the virtual directory for the images of Oracle Application Express. To support future upgrades Oracle Application Express, set the directory of the virtual image that / i /. - what I have to do something to ' set the directory of the virtual image that / i / "?
WM Peck 1958 wrote:
I loaded Oracle 11 g EE at home and it works well, but I'm not too familiar with administering a d.b.
I try to install The Express Applicationand need to know where to put things, etc.
I so need to run the following command to install the APEX and have a few questions...
@apexins.sql tablespace_apex tablespace_files tablespace_temp images
Example: @apexins.sql SYSAUX SYSAUX TEMP is
tablespace_apex is the name of the storage space for the user of the Oracle Application Express application. - I should just do this USERS?
tablespace_files is the name of the storage space for the user to Oracle Application Express files. - USERS?
tablespace_temp is the name of the temporary tablespace and tablespace group. - TEMP?
images is the virtual directory for the images of Oracle Application Express. To support future upgrades Oracle Application Express, set the directory of the virtual image that / i /. - what I have to do something to ' set the directory of the virtual image that / i / "?
If your goal is to get an environment APEX upward and running for purposes of personal training, then simply use the proposed default values.
The directory of the virtual image is configured by the installation process.
Maybe you are looking for
-
When the HD 5650 graphics drivers will be updated?
Where can we get an update on the graphics drivers for HD 5650? StarCraft 2 does not recognize my grahpics card. I can play the game, but some graphics settings are forced low, as the effects of lightning...
-
Pre-installed activated windows 7 says not installed
It says this when I try to activate the key for office 2010 (family and student edition) when I check back it says active.I gave microsoft - you don't have to meet. Already returned card not activated, but it is now.Pls help.
-
EAP-MSCHAP v2 - Netgear WN3100RP
Dear community, I need to know is possible somehow to set up a network known with the known username and password known on the Netgear WN3100RP? I would boost the signal WiFree located, but I found no option to give my user name password &, he would
-
use offline) on my Macbook Pro and I phone 5?
Apple music can be saved (offline) on both my Mac book & I phone?
-
Call settings options not available in A6000 +.
I couldn't find the options call A6000 parameters +. Call settings Call waiting Call forwarding Call barring