mini iPad Watch Flash then plugged into 240v outlet but power guard falling %. What could be the cause of this?
My question is General, my girlfriend overseas has my mini iPad 1st gen... it must have the last update, but I'm not sure that the wifi is bad enough, that some applications does not yet update 100%. Anyway, is his problem, and I can see it on find-my-phone app... When you plug the iPad it shows the symbol with the lightning, but the % of power is not on the rise, more often she gets, especially if it is used. She uses the system load of 5 watts. I bought a charger wall 12 watts for her, but she won't get it for a few weeks. The voltage is 220-240. I wonder if she can be a dirty plug in the iPad itself or can the points of tension also be a problem, they are known to have brown-outs, so that little said that power is incompatible. Sometimes at night it gets a load complete another time it's half are charged. I'll add other devices using the same power source is fully charged. We used apple cords and after walking both strings have the same question. or it shows it is charging but decreases or it does not show only be charged at all. We will only on the symbol with the lightning to discern whether it is supported or not, but some other posts, I read that may not be a good indicator as she is in charge State. Quite frustrating, any advice would be helpful!
I'll have him get the socket cleaned today to see if that helps... Next step will replace the decision-making load inside the iPad, I'm really trying to avoid this, it is almost 3 years, so maybe that's the problem as well.
Howdy there Wildmain,
It sounds like the mini iPad GFs constantly recharges on its own even with different cables. There could be a variety of factors here, so I would use the next section of the following article to help you troubleshoot it or whether it may be necessary to service on the device:
If your device doesn't load or loads slowly
If you have very low battery and you plug in the power, a black screen or with a red battery may appear for a few minutes. Charge your device for half an hour. If it still doesn't load, follow these steps:
- Check your charge cable and USB damagedadapter *, such as rupture or bent pins. Do not use damaged accessories.
- Remove all debris from the charge on the bottom of your device socket, then firmly plug your cable to charge your device. If the port of loading is damaged, your device probably need service.
- To a power outlet wall, search for closed connections between your charge cable, USB adapter and outlet or try another outlet. For a computer, verify that it is not in mode 'sleep', then try every USB port on the computer.
- Restart your iOS device. If your device does not illuminate or still does not, know what to do.
Thank you for using communities of Apple Support.
This happens on my computer laptop computer grandsons used mainly for school, can not connect to the school if windows is bypassed.
Welcome to Microsoft Community where you can find the answers related to Windows.
According to the description, it looks that you are facing a problem connecting to Windows, it would be great if you can answer these questions to help you further.
1. have you made changes on the computer before this problem?
2. you receive an error message or error code?
3. are you able to boot computer?
4. What do you mean by "windows install, then go by disconnecting guest?
I suggest to start the computer in safe mode and check if the problem persists.
If the problem does not persist in safe mode, and then perform a clean boot in order to check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts. Follow these steps to start the computer in a clean boot.
How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135
Note: once you have completed troubleshooting, perform the steps in the step 3: to reset the computer as usual.
We would be more than happy to help you if the steps above did not solve the problem.
but the charges when it is connected to the power supply Anker. Using iOS 8 now. Tried to connect it to a laptop and PC, two different outlets, two different adapters Apple iPad, a car adapter, three different cables, and I get the same result. no load or no Flash. It seems to be a very slow load when it is connected to the power/computer Jack. The iPad acknowledges that the cable is connected but does not load properly. This started happening about 3 hours ago.
I spoke to Apple support, and the diagnosis showed that the battery was fine and not depleted and I had the old iOS. That could be what is causing the problem and if so... Why now? I can't upgrade to the new iOS until I reached 50% since it does not record it is plugged into an outlet.
In general, the load on the computer USB is slower that a wall jack - however in your case you indicated that even the outlet wasn't au. Well, if you can get the iPad to 50% and update the iOS - it is certainly useful to see if he can solve your problems. The other option would be to go back to iTunes and do a factory restore
A few weeks go, my pc suddenly buzzed and then stop. Since then, after that it's over a short period, it will switch off itself. It could be the cause, or what should I do?
A few weeks, my computer started buzzing and then stop. Later, I started again in safe mode. I started again with safe mode several times. Now I start it in normal mode, but it still turns off after a while, even if it sounds no more. What could be worng? What should I do? I have Norton antivirus and it does not say that he has a virus. Also, I've scanned with Microsoft and they say that it is virus-free. I am at a loss.
He continue to work OK in safe mode, or it shuts down in safe mode as well?
If it continues to operate in safe mode or if she stays working long enough in 'normal' mode, then try a clean boot and see it works OK under that.
It is possible that the system hardware fails somehow, so it is advisable to back up your data IF you can maintain your PC long enough in Mode safe.
phone was low load and I let it run out, but when I plugged in the charger all that I get is a blank screen and flashing light. How he goes again please.
Have you tried to remove and reinsert the battery while your device is connected to a charger? If not try and see if it blinks.
Laptop: Toshiba Satellite L855.
I had a power supply problem and I describe below.
It all started in a morning, laptop has not powered, so I plugged it in to the power source, necessary to wait 30 minutes for the power button to work, the next morning same thing happened. Tried removing the battery, same problem appear.
If the stop of the GET of the laptop then turn on it works, the problem occurs when it is shut down for a period of time.
I left a night the laptop plugged in, it started normally, seems that there is something that has become warmer so pc can start.
Can someone tell me what this 'something' may be? It can be replaced? What is the real problem?
It is not easy to offer a good explanation why this happens. Fact is that work well electronic power is responsible for power supply for laptop s.
I can't tell if something must be more hot or not, but this case should be checked and reviewed by Toshiba service provider.
Believe me, in this case there not much you can do about it. You can just do a few tests, but no more than that. I highly recommend you contact the nearest Toshiba service provider in your country and ask for help.
Let the technicians to control your machine.
Out of curiosity: is the warranty still valid?
I imported all my photos in photo library on macbook OSX capitan. The photos were additional emissions not duplicated using power foto and gemini. This in the photo library. After checking, I have 48,000 photos, 80,000 duplicted >. After that completely eliminate the unwanted duplicate photos I import to LR6 by drag and drop the trump card in the library. Then all photos, including the deleted ones appear.
Any solution or another way to import? photo for mac contains all my data being sought.
This file did you import into Lr?
And I would say you will find the duplicate in Lr, note the file name and then search the photo library to see if you have multiple instances of this photo. You cannot use Spotlight; you will need to use another utility like find easy.
But you are right; If you have deleted them permanently from the "recently deleted" album they should be in the trash; you could confirm that as well.
And use 'Show in Finder' alleged images duplicated in Lr to see where the copy is stored; that should also give you an idea of why it did not work.
I started assuming that it was a Flash issue. I returned 10.3 and always occur. Thought it was a problem with Waterfox. I uninstalled and switch to Firefox. I have a maximum of 5 tabs open and accidents are produced independently of what are Web pages in tabs. Here are the reports.
683e5c85-65b4-44f6-9e8d-35d6e76f2d9d1/28/201312:28 PM bp-e9e49fb1-7364-424f-ba20-14db821301281/28/201311:14 AM bp-1cc60fce-33d7-450b-a969-9890521301281/28/201310:42 AM bp-d65bba4b-e5e1-4ea0-8bc3-ab8d921301281/28/201310:03 AM bp-5907205b-3cc1-442d-8f0a-7d18a21301281/28/201310:03 AM bp-a6a18ff8-518d-4d0d-9416-2ad2421301251/25/20134:31 PM bp-13f1690a-a410-418e-9721-2cac121301251/25/20134:15 PM bp-c031b849-cc5e-48ca-b2f2-a7d2221301251/25/20134:15 PM bp-7c4a5200-b3c5-4d32-8563-4ecf221301251/25/20139:43 AM bp-7677f547-7b5a-45c4-9d98-6a92421301251/25/20139:13 AM
I need a secure download to fix this
1 how long have you been faced with this problem?
2 did you recent hardware or software changes to your computer before this problem?
3. what exactly happens when you try to play any movie or listen to music in windows media player?
4. are you able to hear the default sounds, like the startup sound?
5. what type of media you are trying to read?
6. are you able to play the same files from media on another computer?
Please answer these questions. This will help us assist you better.
Step 1: You can try the steps outlined in the article and check if it helps.
Step 2: Look for a red or yellow bangs in device for the sound card Manager and send back the same.
Thanks and greetings
Umesh P - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
I recenty used my 1 TB of storage on my Macbook Pro, and I was looking for in what has been the cause of this. I realized that about 700 GB because of videos on final cut. Knowing this, I saved all my videos and decided to remove the oldest, but keep the new. I checked my storage, and nothing has changed. I realized, the application was not delete videos, but rather delete just how clips have been published. He always kept the full video. So what I request is, is anyway that I can make sure when I delete a project, it will remove all the (video) content, associated with this project? Also, is there anyway that I could delete the video projects I already deleted?
OSX El Capitan
MacBook Pro (retina, 15 inch, mid-2015)
2.8 GHz Intel Core i7 proccessor
16 GB 1600 MHz DDR3 memory
Start drive Macintosh HD
Graphics AMD Radeon R9 M370X 2048 MB
Storage 1 TB of storage Flash
All depends on how you store your media, be it inside the library or outside the library. If internal sound then the best way to proceed is to organize your material in events as well as your project. When you delete events associated with the project, media in events are deleted as well.
I hope someone can advise me.
My laptop recently has problems of severe performance as soon as I plug it into the charger. Everything runs slowly, even just open a website takes an age, windows navigation menus is slowly, basically, every action you perform runs on a 10th of normal speed.
I used HP online support and the chap took control in my PC remote, lots of services disabled and starting the process and then restarted my PC, making it even more useless! I couldn't even reconnect to the HP support to undo changes, he did. And he has not tried to call me after f * king my laptop.
Anyway - I have heard that a defective charger may cause the problem I'm having, but when I suggested that he told me that it is a myth.
Can someone tell what could be the problem. The parameters of plan of my food look good and nothing has been changed in the OS, so I can't understand why this only happens when I load the wretched machine and can only assume a faulty charger or mobile hardware problem
Thanks in advance.
It is MCC, another post that you comment. I can't find the answer on this topic button so I found you here instead.
Looks like you have the same problem I had. I tried tons of stuff to fix the problem but nothing did the trick.
But then, I decided to buy a new AC adapter and check if it was the problem.
AND IT SOLVED EVERYTHING.
I don't pretend to know that your computer has the same problem as mine, but for me, a brand new $ 80 real laptopparts.ca AC adaptor has been around. Laptop still works like a charm on this adapter. I made sure to buy a better one than the one that came with my laptop. I used to have a 90W, now I have a 135W, compatible with my laptop model.
I hope that she can help you to know that it worked for me.
Today I bought a new IPad Mini Air 2. When I tried to set up using my ID existing (from a gen 4 IPad old, broken) I got a message that the 9.0.1 iOS is not compatible with my ID which has been implemented on iOS 9.2. I can't go past this in the installation program. Is it possible to settle this issue without taking the mini Ipad back? If I create a new ID, I'll be able to update the iOS? Or should I take the IPad mini back and get another product with the right OS already installed?
Grateful for any help!
You try to restore a backup? The message is that the backup you are trying to restore has been taken on a device running iOS 9.2, you can not install this backup on a device that is running a lower version of iOS.
Do not restore the backup, just configure the iPad like new: If restoring from an iTunes or iCloud backup requires a newer version of the iOS - Apple Support.
Then update its version of iOS iOS 9.2 (settings > General > software update), and then you can try to restore the backup: restore your device from an iCloud or iTunes backup - Apple Support
I just had the 4 GB clip, got it home, plugged in and (drum roll) nothing. is this normal as the Virgin unit charge? Please someone help me!
I guess I'm a learned fool. just to see if it would work I did a soft reset and then plugged into the laptop (Yes it was connected before). all of a sudden, he started upward. guess that's all. Thanks for the info!
Since I've upgraded to Windows 10, my Firefox browser crashes with the message Adobe Flash Player Plug In
broke down. I have and you have reinstalled the latest versions of Firefox and Adobe Flash Player. Accidents are
constant and make it extremely difficult to use Firefox as my browser. Or Adobe Flash Player or
Firefox seem to have a solution.
I use a Dell technical support. Finally, we solved this problem in
Uninstalling Adobe Flash Player (period). They have is Windows 8
10 Windows have built in flash players and Adobe was originally
a conflict. It would be good information to pass on to all
people complain about this problem.
The mini iPad 2 comes with preloaded iMovie?
You must download it from the iOS App Store.
Maybe you are looking for
After the upgrade to Sierra, my open Mac Mail Inbox with the cursor showing the older posts, so I have to manually drag the most recent messages every time. No other Mail folder behaves like that, and none have either before the Sierra. Anyone?
Hello I have a pro a100, which I think is overheating. It works for about 30 minutes then goes of and returns to the initial boot up screen "Toshiba" ect, tires to start then repetition of the foregoing. I blew the fan making dust and the air outlet
Hello I'm looking forward to upgrade the RAM in my Satellite M40x-183. The laptop came with 512 MB of RAM. Of the record, I learned that it can be expanded to 2 GB. I don't know what type of RAM (DDR1/2) and how often rely on m40x-183. Please help me
I want to delete an image of my hard drive system. I found the following tips: Click on start-> Search: backup-> open "Backup and Restore"-> click on 'Manage space'-> Delete Unfortunately when I do that, there is no option 'manage space '. I use Wind
Original title: startup problem When I plug the switch on my laptop, my laptop start automatically without pressing the Start button and a message is displayed as the CMOS RTC POWER FAILURE. Press F1 to continue and press F2 to setup.when I press F1,