Mini is short on the wireless range

Similar Questions

• The new iPad mini 4 comes with the Wireless charging technology?

  I know there are covers and accessories to make compatible devices, but the mini 4 come preinstalled with such technology or it can reach the refill wireless via an accessory?

  This is not

• HP Mini 110-4112ea with the atheros wireless card will not connect to internet

  I just bought the above and tries to connect to the internet via my router netgear wndr3700 but cannot make it work. network is the following: Mini 110--->---> Virgin (netgear) supplied wndr3700 router modem (also wireless)---> internet

  Although it shows as having internet in network & sharing Center it just connects and applications like Skype and Norton does not connect. When I give the wndr3700 with ethernet cable that works very well. Also if I join WiFi on a blank area, that's OK. I just want the Mini 110 to attach the wndr3700 wireless and give access to the internet as it should and other PC at home do. I installed the latest drivers from the HP (sp54972 - version 9.2.0.444) site but nothing helped. Help, please!

  Right - I myself solved by finding the relevant info on the Netgear forum. This article describes change some settings on the Netgear router. For the benefit of someone else knows the same or similar problem and for the technical gurus at HP, that's what I did:

  Activate these settings in the configuration of the QoS.

  Activate -WMM (Wi-Fi Multimedia) parameters (b/g/n 2.4 GHz) (box)
  Activate -WMM (Wi-Fi Multimedia) parameters (5 GHz a/d) (box)

  (in my case I need not turn on WMM for the 5 GHz band, but just in case I need it in the future I did anyway...)

  Don't ask why it works or what it means: it works!

• Impossible to get Min, Max and median of the values in the date range values

  Hello
  
  I had a requirement as to show the data of each charge group of wise men as '< 100' ' 100-199 "" 200-299 "" 300-399 "400-499, 500-599 600-699 700-799 800-899 900-999 > = 1000 '"»
  
  With the query be able to get the count between the beach and the total below. But impossible to get the Min and Max values for this range. For example if the County < 100 is 3 then in these 3, the lowest value is need to display in the min. Idem for Max column also.
  
  In the light of the median value on these values.
  
  Thanks in advance.
  
  
  
  Requirement is as below:
  State < 100 100-199, 200-299 300-399 400-499, 500-599 600-699 700-799 800-899 900-999 > = 1000 Min Total median Max
  AK 1 2 0 4 1 4 4 35 35 4 1 $25 $85 850 $1,200
  AL 0 0 2 27 10 17 35 2 2 35 0 $103 100-$1 500 750
  
  
  * "QUERY ' * '"
  
  WITH t AS
  (SELECT 'AL' State, 12 DUAL FROM VALUE
  UNION ALL
  SELECT 'AL' State, 67 FROM DUAL VALUE
  UNION ALL
  SELECT 'AL' State, 23 FROM DUAL VALUE
  UNION ALL
  SELECT 'AL' State, 12 DUAL FROM VALUE
  UNION ALL
  SELECT 'AL' State, 12 DUAL FROM VALUE
  UNION ALL
  SELECT 'AL' State, 78 FROM DUAL VALUE
  UNION ALL
  SELECT 'AL' State, 34 FROM DUAL VALUE
  UNION ALL
  SELECT 'AL' State, 4 DUAL FROM VALUE
  UNION ALL
  SELECT 'AL' State, 12 DUAL FROM VALUE
  UNION ALL
  SELECT 'AL' State, 15 VALUE FROM DUAL
  UNION ALL
  SELECT "AZ" State, FROM DUAL VALUE 6
  UNION ALL
  SELECT "AZ" State, 123 FROM DUAL VALUE
  UNION ALL
  SELECT "AZ" State, 123 FROM DUAL VALUE
  UNION ALL
  SELECT 'MY' State, 23 FROM DUAL VALUE
  UNION ALL
  SELECT 'MY' State, 120 FROM DUAL VALUE
  UNION ALL
  SELECT 'MY' State, 456 FROM DUAL VALUE
  UNION ALL
  SELECT 'MY' State, 11 FROM DUAL VALUE
  UNION ALL
  SELECT 'MY' State, 24 FROM DUAL VALUE
  UNION ALL
  SELECT 'MY' State, 34 FROM DUAL VALUE
  UNION ALL
  SELECT 'MY' State, 87 DUAL FROM VALUE
  UNION ALL
  SELECT 'MY' State, 23 FROM DUAL VALUE
  UNION ALL
  SELECT 'MY' State, 234 DUAL FROM VALUE
  UNION ALL
  SELECT 'MY' State, 789 FROM DUAL VALUE
  UNION ALL
  SELECT "HD" State, VALUE FROM DUAL 54321).
  -End of test data
  AS T1
  (SELECT State,
  NVL (COUNT (DECODE (VALUE, 0, 0)), 0) '< 100 ',.
  NVL (COUNT (DECODE (VALUE, 1, 1)), 0) '100-199.
  NVL (COUNT (DECODE (VALUE, 2, 2)), 0) '200-299.
  NVL (COUNT (DECODE (VALUE, 3, 3)), 0) '300-399.
  NVL (COUNT (DECODE (VALUE, 4, 4)), 0) '400-499.
  NVL (COUNT (DECODE (VALUE, 5, 5)), 0) '500-599,'
  NVL (COUNT (DECODE (VALUE, 6, 6)), 0) '600-699.
  NVL (COUNT (DECODE (VALUE, 7, 7)), 0) '700-799.
  NVL (COUNT (DECODE (VALUE, 8, 8)), 0) '800-899.
  NVL (COUNT (DECODE (VALUE, 9, 9)), 0) '900-999. "
  NVL (COUNT (DECODE (VALUE, 10, 10)), 0) ' > = 1000.
  (SELECT STATE,
  CASE
  WHAT VALUE < 100 THEN 0
  WHAT A VALUE BETWEEN 100 AND 199 THEN 1
  WHAT VALUE BETWEEN 200 AND 299, THEN 2
  WHAT VALUE BETWEEN 300 AND 399 THEN 3
  WHAT VALUE BETWEEN 400 AND 499 THEN 4
  WHAT VALUE BETWEEN 500 AND 599 5 THEN
  WHAT VALUE BETWEEN 600 AND 699 6 THEN
  WHAT VALUE BETWEEN 700 AND 799 THEN 7
  WHAT VALUE BETWEEN 800 AND 899 8 THEN
  WHAT VALUE FROM 900 TO 999 9 THEN
  WHAT VALUE > = 10 THEN 1000
  END
  VALUE
  T)
  GROUP BY State)
  SELECTION STATE,
  "< 100."
  "100-199.
  "200 299",
  "300-399.
  "400-499.
  '500-599,'
  "600-699.
  "700-799.
  "800-899.
  "900-999."
  "> = 1000."
  '< 100 '.
  + "100-199.
  + "200-299.
  + '300-399.
  + '400-499.
  + "500-599.
  + '600-699.
  + "700-799.
  + "800-899.
  + '900-999 ".
  + ' > = 1000.
  in total,.
  less ("< 100",)
  "100-199.
  "200 299",
  "300-399.
  "400-499.
  '500-599,'
  "600-699.
  "700-799.
  "800-899.
  "900-999."
  ("> = 1000 ') min_val,.
  largest ("< 100",)
  "100-199.
  "200 299",
  "300-399.
  "400-499.
  '500-599,'
  "600-699.
  "700-799.
  "800-899.
  "900-999."
  ("> = 1000 ') max_val
  FROM t1
  /

  Why not keep it simple?

  WITH t AS
  (SELECT 'AL' state, 12 VALUE FROM DUAL
  UNION ALL
  SELECT 'AL' state, 67 VALUE FROM DUAL
  UNION ALL
  SELECT 'AL' state, 23 VALUE FROM DUAL
  UNION ALL
  SELECT 'AL' state, 12 VALUE FROM DUAL
  UNION ALL
  SELECT 'AL' state, 12 VALUE FROM DUAL
  UNION ALL
  SELECT 'AL' state, 78 VALUE FROM DUAL
  UNION ALL
  SELECT 'AL' state, 34 VALUE FROM DUAL
  UNION ALL
  SELECT 'AL' state, 4 VALUE FROM DUAL
  UNION ALL
  SELECT 'AL' state, 12 VALUE FROM DUAL
  UNION ALL
  SELECT 'AL' state, 15 VALUE FROM DUAL
  UNION ALL
  SELECT 'AZ' state, 6 VALUE FROM DUAL
  UNION ALL
  SELECT 'AZ' state, 123 VALUE FROM DUAL
  UNION ALL
  SELECT 'AZ' state, 123 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 23 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 120 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 456 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 11 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 24 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 34 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 87 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 23 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 234 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 789 VALUE FROM DUAL
  UNION ALL
  SELECT 'MH' state, 54321 VALUE FROM DUAL)
  SELECT state
       , NVL( COUNT( case when VALUE < 100 then 0 end ), 0 ) "<100"
       , NVL( COUNT( case when VALUE between 100 and 199 then 0 end ), 0 ) "100-199"
       , NVL( COUNT( case when VALUE between 200 and 299 then 0 end ), 0 ) "200-299"
       , NVL( COUNT( case when VALUE between 300 and 399 then 0 end ), 0 ) "300-399"
       , NVL( COUNT( case when VALUE between 400 and 499 then 0 end ), 0 ) "400-499"
       , NVL( COUNT( case when VALUE between 500 and 599 then 0 end ), 0 ) "500-599"
       , NVL( COUNT( case when VALUE between 600 and 699 then 0 end ), 0 ) "600-699"
       , NVL( COUNT( case when VALUE between 700 and 799 then 0 end ), 0 ) "700-799"
       , NVL( COUNT( case when VALUE between 800 and 899 then 0 end ), 0 ) "800-899"
       , NVL( COUNT( case when VALUE between 900 and 999 then 0 end ), 0 ) "900-999"
       , NVL( COUNT( case when VALUE >= 1000 then 0 end ), 0 ) ">=100"
       , count( value ) "total"
       , min( VALUE ) "min"
       , max( VALUE ) "max"
       , avg( VALUE ) "avg"
       , median( value ) "median"
  from t
  group by state
  

• 7520 HP loses the wireless connection. What can I do?

  I've seen lots of talk about HP products, loss of wireless connection.  I have the same problem with my 7520.  Initial Setup is perfect, but he began to lose the connection when it went into standby mode.  Someone at - it a solution?

  THERE IS A FAST SOLUTION!
  On April 18, 2014 (page 11 of this thread), I posted a quick solution. My HP7520 printer has worked on Netgear router WIFI 7550 flawless since then. I suggest you read this post.
  From long experience with HP, I found they have great hardware, but their software has always been dismal. The ultimate "fix" would be for HP address their failure of a software that allows to my difficulty in working.
  A single "tweak" in the router security settings wifi will do. The rest of settings changes other people have suggested are short lived (about an hour in most cases), while they don't be reconnected unless they restart everything. It makes sense because of what is happening.
  The single "twist" parameter should logically point HP programmers to where in the firmware, there is the problem. They listen to? And, really, it doesn't matter on all other settings printer and router. All mine are back to the default settings and it all still works very well.
  Go to a BBQ and stop wasting your time on this issue.
  Ken

• ProBook 4520 s - exchange of the wireless network card

  Hello everyone.

  I think the exchange of the wireless network card in my Probook 4520 s, due to the low flow.
  So I searched for a while a 5 Ghz supporting the card and found out that I am only able to get in the "white" cards list working. Then I looked at this page:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en & CC = US & objectid = c02487851 & jumpi...

  These cards can be any, that have been used in 4520 s. Mine (according to the Device Manager) is the Broadcom 4313 802.11b/g/n. This thing only supports 2.4 Ghz. Now, I looked at the list for a 5 Ghz supporting the card. I think that the 802.11A/B/G/N WLAN Intel HMC 572520-001 minicards can operate on 5 Ghz, because I read, that A appears only with maps of 2.4/5 Ghz. I read too, that maps of 2.4 / 5 GHz have 3 antennas, but on this card I only the slots for 2. Is this good? And this card would go into my 4520 s?

  Greetings,

  Colony

  Hi, colony:

  You are right about your statement about the cards being described as A/B/G/N dual-band.

  The best thing to do is look at Chapter 3 of your service manual.

  You can only order one of the cards listed as supported and it MUST have the HP reference on it or it won't work.

  I see only two possibilities for you...

  The 6200 Intel and Broadcom 4322.  Make sure you also get the part # that corresponds to what country you live.

  If your current Broadcom card has integrated Bluetooth, you will lose your Bluetooth capability if you order an integrated HP bluetooth module and probably the cable too.

  None of the dual-band cards have embedded bluetooth.

  Link to the service manual.

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c02439213/c02439213.PDF

  Then, you can order a card on the link below.

  If you do not live in the United States, you can change your country at the top of the page to yours.

  http://h20141.www2.HP.com/hpparts/default.aspx?mscssid=6857BCBBC4CD4470B9282F130A563697

  Paul

• Satellite L875-13D - problem with the installation of the wireless card

  Hello

  I bought a Toshiba Satellite L875-13D. I installed Windows 7 Enterprise edition.

  I have a problem with the installation of the wireless card. I have downloaded the driver on Toshiba website, but it does not work. When I run the file .zip and .exe, nothing happens. In addition, there are several pilots: Athos, Intel and Realtek and I do not know what is mine... I test all the driver but same result.

  I have the same problem with Bluetooth driver that does not work too.

  Thank you for your help.

  > But it does not work yet for Bluetooth,... I have install the driver by the .exe from the Toshiba Web site but when I run the application, I have error that says missing tosbtapi.dll. I founded and downloaded and installed on budget3 and SysWOW. But after that, the installation is blocked. Any ideas?

  Laptop Satellite L875-13D isn t equipped with Bluetooth.
  Didn t you know who?

• Re: Satellite L670 loses the wireless connection

  Hello

  I have a Satellite L670 - 1 H 1, a new laptop that runs Windows 7, with all the drivers and software uptodate, including the wireless card.

  I have a BT Home Hub 3 with an Edimax EW 7416APN v2 300 m range extender to help boost the signal in the kitchen area.

  The laptop works fine when I stay in the room where the reception centre. If I move in the kitchen the laptop will usually lose the wireless connection after a few minutes and I cannot get it back unless I turn the LAPTOP works and return to the Home Hub.

  I see no obvious reason to this problem. Two other laptop computers used in the home, more a smartphone stay connected with full signal in every corner of the House, at any time.

  I have to use the range extender, but is it possible that the laptop Toshiba just don't hear well with it?

  Any advice would be welcome.

  Thank you
  Canton

  Hello Canton

  As you know quality of connection WLAN depends on different factors is not easy to say why you have this problem, WLAN. I use Toshiba laptops for a long time now and I didn't notice in the past some serious question of WLAN.
  For example I'm 4 router with standard g and have very good signal even in the cellar too or out in the back yard.

  If possible, try to test the WLAN connection elsewhere. Maybe your friends have WLAN routers so you can test it.

  You have a new router or old?
  What WLAN standard do you use (b/g/n)?

• Printer HP Photosmart more B210 loses the wireless connection. with MAC 10.6 and Linksys router.

  From time to time my printer HP PSt + B210 indicates not 'online' in the window of the printer utility and do not print.

  I have spend hours to review what I did in th past and become confused.

  Should I start with the HP utility and make sure that my printer is listed only once in the queue (as is sometimes show 2 forms - for the same printer) OR should I stop MAC PB > router > Modem and then restart in correct, reverse order?

  Given that I need to choose "IP automatically...". ", I used Safari and put the 192.168.1.1 in the address bar and follow these steps, as already suggested.  What would be the clear measures to reconnect my HP printer status online? Thank you very much!!

  We will set an IP address of the printer:
  
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). You can find the beach DHCP from the router using its internal settings page or in its manual. Use the CD that came with your router or type the IP address of the router (ends para.1) in a browser.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the bridge and the first DNS. Let the second white.
  -Click 'apply '.
  
  Now, stop the router and printer, start the router, wait, and then start printing.
  
  After that, you will have to redo 'Add printer' using the new IP address.

• How to install mini-pci in 1955-S805 wireless card?

  I am installing a new mini-pci wireless card in my Satellite 1955-S805. I was able to lift and remove the black band brilliant above the keyboard and unscrew the two screws holding the key on the keyboard. But under the keyboard is silver metal. It doesn't seem to be a way to go beyond that. Everything I read seems to say that the mini-pci card under the keyboard.

  Anyone know how to install a mini-pci card in these books of 1955-S805? Or does anyone have a manual on this model?

  Thank you
  Pat

  Hi Pat

  I don't know, but you have an American model. I have laptop 1900-703. This is a European model, and I had no problem to install the mini-pci wireless card.

  Your device also has a wireless keyboard. Am I wrong?

  If you want a built in wireless card, you must remove the laptop keyboard using keyboard left and right of your unit releases. After that, you can see small cover on the place of the keyboard and this cover are fixed with a screw. This small undercover he has wireless card slot.

• Satellite L300 - unable to connect to the wireless network

  I have a NETGEAR router and a Toshiba Satellite L300 laptop HP DV2000.

  The HP can connect to my wireless network and also my neighbors network next door (which is not secure)
  However, the L300 can only connect to the network of my nextdoor neighbour even if it can 'see' the NETGEAR network.

  I changed the security from WPA to WEP up to now no security at all, and it seems not to matter.
  The strange thing is that my L300 CAN connect to a wireless network, but not mine!

  And my wireless network works as I can connect from my HP laptop.
  On the L300 it shows 5 bars on the NETGEAR is not a problem of weak signal.

  Any help would be appreciated.

  Try changing the WLAN settings on your router. Compare the WLAN settings on the settings of your laptop and the router.

  Test it with standard B on both devices.
  I mean if your laptop can see neighbours WLAN card wireless network in the laptop must be OK.
  I really thing all is due to wrong WLAN settings.

  Play around with that sort of thing.

• Satellite A30 does not see other devices in the wireless network

  I recently bought a Toshiba Wireless LAN Mini PCI Card, I installed and was able to recognize my broadband, but he does not see the other network devices. I have not provided with drivers or software for the operation of the card (I bought a decent retailer). Can you recommend me to downloads that would be this card?

  I have a laptop of Satelite A30 1 GB ram 60 GB HDD.

  Large files sometimes also stop transfer (crashes) when you use my USB connection. The usb controller uses the driver microsoft 5.1.2600.0 dated June 1, 2002.

  Is this a driver problem?

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the WiFi network so all the computers must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the computer WiFi network so all must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.

• Re: Satellite L450D - 13 X - is it normal that the wireless light will be red?

  I recently bought a Satellite L450D - 13 X laptop and have just noticed that the led of the wireless system is red.
  I have a 100% a good range wireless connectivity using my BT home hub v2a.
  Is it normal that the wireless light will be red, or should it be green like the others?

  Van
  Delete.

  Hello

  Seeing the Wlan can be ON or OFF. It does not change the color!
  WLAN LED tells you the State of WLan.
  If the light is red while this means that WLan is ON.
  If the light is OFF then the WiFi network is disabled.

  Welcome them

• Need the latest news of the wireless card and more on my Satellite 1905-S301

  First post here. Need help.

  Toshiba has no info in their manual or anywhere on their site I could find about it.

  The manual mentions that the stock for my Toshiba Orinoco Gold 1905-S301 wireless card (8484415560) wireless adapter.

  Thing, is that the map is years old, and I want to know what the last card that will work with my 1905-s301. I saw many posts around the net
  people with problems with mini-pci in Toshiba laptops different cards, where the power light and wireless do not work, and many positions
  on workaround with pin 13 on the map so that the thing stays on permanently.

  So what I want to know is: what is the latest version of the wireless standard that works with my 1905-S301 (802. 11 g, 802.11n, whatever), what brand of card
  I can't (model number would be useful) that works, and it should be a map where I don't have to do no work around... where the on/off switch works the way it's supposed to and seeing Wi - Fi will also do.

  Now... Apart from the above, it would be preferable to use a Type II CardBus PC card for the slot on the side of my laptop. Again, I am ignorance about these cards, but I don't know that you can get wireless cards that can be used. It would be preferable to an internal card? I know that they went to the PC Card Express format a few years before, so I can't assume CardBus cards cannot be purchased new.

  Basically, I just want the ability to the most recent and WiFi for my laptop. I am to go to Seattle in May and want to have my computer laptop maxed out as far as it's capacity so I can entertain me

  A few other questions:
  Is my Wired CPU? Can I spend it? And same for my graphics card. 16 MB graphic memory is not good, and I would like to know if I can pass that somehow.

  Thanks in advance. Any info on my questions above would be much appreciated.

  Hello!

  I agree with Garrett, contact the ASP in your country for information. They know what are the cards will fit in on Satellite 1905 and work.

  On WiFi standards, I can say that the newer 802.11n standard will not work in this good old classic because that's why you need 3 antenna cables.

  The CPU can be improved, but this will be maybe not supported from the BIOS. On the site of Toshiba is a document available thereon:
  http://195.182.196.33/KB0/FAQ7A01ZW0007R01.htm

  Finally and above all the video RAM depends on the RAM memory and is turned on automatically. I don't know but if you have more RAM you will also get more video RAM but this ask your ASP too m.

  Good bye

• Windows xp on te2000 cannot detect the wireless LAN card

  I have a portable te2000 that the wireless lan card is detected as PCMCIA MTD-0002.
  I downloaded the drivers, but once again I installed windows will not use it. I get the error code 10.

  How can I make it work?

  The wireless port is enabled, but it has an orange light (not green) no idea why?

  Thanks in advance
  Ken.

  Hi Ken

  Use this original device ORiNOCO Mini PCI Card (comes with) or if you use an additional card? The unit is pre-installed with the original recovery CD?

  According to the specifications of error 10, you should try to update the WLAN driver.