Missing albums for the album post upgrade
Since iTunes updated itself to 12.4, Miss me a lot of albums for the Album. As far as I know, these are all compilation albums. They show to songs and artists view (where they are grouped under 'Compilations'). I have the settings set to "Title" overview, so I don't understand why iTunes is unable to recognize them. Thanks for any help...
This seems to be a bug in the current building with the compilations are not if you use: View > as > Albums and view > sort by > title. Changing options should reveal hidden items.
TT2
Tags: iTunes
Similar Questions
-
Satellite A300-247 - cannot register for the Windows 7 upgrade
Hi all
I have the problem by registering for free Windows 7 Upgrade.
I have a Toshiba Satellite A300-247 and in their registration require the number of room and the j) not it is only numbered series. I bought the laptop in Israel. Is someone know what to do thank you to useful... Lars_3 thank you very much you the answer.
Logo of the model is still off I wanted to say thank you, there are problems in the site of the browser servers think so much
Hello!
To be honest it's a little hard to understand your question.
What exactly is your problem? I think you want to register on the site to upgrade to Windows 7.
I n t have experience with this because I didn t buy such a phone compatible update yet, but I think that you need the serial number and the model number of the laptop. The two pieces of information you can find on the underside of the laptop.Don t forget that this upgrade option is available for laptop purchased from June 26, 2009 to January 31, 2010.
Good bye
-
known issues with the utilities for the Windows 7 upgrade Lenovo
I have a Lenovo T61 Thinkpad with Vista Home Premium Service Pack 2 32-bit operating system. I have currently only about 1 GB of space on my hard drive Go 67.9. I wanted to get rid of Vista and switch on to 7 but currently I don't have enough hard disk space to do (I need at least 16 GB of free space). I decided to buy a second hard drive and do a clean install of 7 so I hope I have less problems in the long term.
My concern is that I ran the Windows 7 Upgrade Advisor report, and he knew questions about utilities of Lenovo, ThinkPad EasyEject Utility and system update. On the Lenovo support Web site, it says that "you can upgrade to Windows 7 without uninstalling these applications, but you may experience problems when their running on Windows 7." When I looked for another application that supports Windows 7, as advised, I found that there are none for 3 known issues of as the cause of the problem is a «limitation of Windows 7» So what the devil? I hate Vista but I do not want to install 7 and then not be able to use my computer properly.
I'm sure many users Lenovo went from Vista to 7... can anyone give advice on what to if wait if I simply ignore these known issues?
Thank you!
Welcome to the forums
You can get the update system for windows7 here
Go through this thread for the simple problem of compatibility with windows7 to eject. Looks like you have not need this tool, once you upgrade to windows 7
I did not understand what you mean by utility Lenovo can you explain a little more about this?
-
I have a question wth the missing icon for the touchpad of Dell.
Original title: what happened to my Dell Touchpad icon under mouse properties
Normally, when I wanted to turn off/turn on my Dell Touchpad, I'm going to start, Control Panel, hardware, mouse and he was there with a big Ole icon to click to turn off. It is causing me so many problems when I type and I use the keyboard, ever the touchpad. However, it is a computer lent, I am and I need to know what happened. The driver for the Touchpad is present under programs and it is up to date but that dag gum icon is no where.
I run for the Dell Touchpad and it can not find it anywhere. Anyone know what happened or how I can get this icon back where the Touchpad can be disabled/enabled?
Any help will be appreciated. Thank you and have a wonderful day. (I use Win 7 with IE10).
Joy
Hello
Thanks for posting your question in the Microsoft Community.
The description of the problem, you want to know how to disable the Touchpad. I'll be happy to help you on this question.
What is the model number of the computer?
I suggest you try the following steps to disable or enable the touchpad by using shortcut keys.
Disable or enable the touchpad by using the access key
http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=424135See also the link: Mouse, touchpad and keyboard with Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-WindowsGet back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.
-
Patch of the DST for the ebs DB Upgrade
Hi all
I'm upgrading ebs R12.1.3 database 11.2.0.4 11.2.0.3 on Sun (sparc) OS. The source DB contains the DST patch 14, do I have to apply the latest patch for the DST as part of the upgrade or I'm good with it?
SQL > SELECT version FROM v$ timezone_file;
Version
----------
14
Thank you!
Yes, these patches are necessary for env EBS.
https://blogs.Oracle.com/stevenChan/entry/dstv25_ebs
Thank you
Hussein
-
Fields comments and missing notes for the view columns
Hello
Miss me the comments and notes fields for columns to display in the relational model of DM. For the columns of the table, these fields are present, so it would be nice to present to views too. The import of designer must be adapted also to import these fields.
JoopHi Joop,
My question is about the import of the designer for these fields. This is still not resolved, not even in rel 4.0
Actually same DM 3.3 imports comments, notes, and comments in the repository designer RDBMS. Although comments and notes are not accessible through the user interface, they are there and you can include them in the custom report.
Comments and notes are accessible through the INTERFACE in DM 4.0
Philippe
-
Identify the missing lines for the hierarchy
Oracle 10.2.0.1
Windows XP
create table vill (identification number (5), area varchar2 (20), subarea1 varchar2 (20), subarea2 varchar2 (20), location varchar2 (20));
Insert in the vill values(1,'AREA1','SUBAREA1','SUBAREA2','AREA1');
Insert in the vill values(2,'AREA1','SUBAREA1','SUBAREA2','SUBAREA1');
Insert in the vill values(3,'AREA1','SUBAREA1','SUBAREA2','SUBAREA2');
Insert in the vill values(4,'AREA1','SUBAREA1','SUBAREA2','VILL1');
Insert in the vill values(5,'AREA1','SUBAREA1','SUBAREA2','VILL2');
Insert in the vill values(6,'AREA1','SUBAREA1','SUBAREA2','VILL3');
Insert in the vill values(7,'AREA1','SUBAREA1','SUBAREA2','VILL4');
-Before is a perfect set of lines because it has all the lines in the area, subarea1 and subarea2.
Insert in the vill values(8,'AREA2','SUBAREA1','SUBAREA2','AREA2');
Insert in the vill values(9,'AREA2','SUBAREA1','SUBAREA2','SUBAREA1');
Insert in the vill values(10,'AREA2','SUBAREA1','SUBAREA2','VILL5');
Insert in the vill values(11,'AREA2','SUBAREA1','SUBAREA2','VILL6');
Insert in the vill values(12,'AREA2','SUBAREA1','SUBAREA2','VILL7');
Insert in the vill values(13,'AREA2','SUBAREA1','SUBAREA2','VILL8');
Insert in the vill values(14,'AREA3','SUBAREA1','SUBAREA2','AREA3');
Insert in the vill values(15,'AREA3','SUBAREA1','SUBAREA2','SUBAREA2');
Insert in the vill values(16,'AREA3','SUBAREA1','SUBAREA2','VILL9');
Insert in the vill values(17,'AREA3','SUBAREA1','SUBAREA2','VILL10');
Insert in the vill values(18,'AREA3','SUBAREA1','SUBAREA2','VILL11');
Insert in the vill values(19,'AREA3','SUBAREA1','SUBAREA2','VILL12');
Insert in the vill values(20,'AREA4','SUBAREA1','SUBAREA2','SUBAREA1');
Insert in the vill values(21,'AREA4','SUBAREA1','SUBAREA2','SUBAREA2');
Insert in the vill values(22,'AREA4','SUBAREA1','SUBAREA2','VILL13');
Insert in the vill values(23,'AREA4','SUBAREA1','SUBAREA2','VILL14');
Insert in the vill values(24,'AREA4','SUBAREA1','SUBAREA2','VILL15');
Insert in the vill values(25,'AREA4','SUBAREA1','SUBAREA2','VILL16');
commit;
Select * from city;
Power required:ID AREA SUBAREA1 SUBAREA2 LOCATION ---------- -------------------- -------------------- -------------------- -------------------- 1 AREA1 SUBAREA1 SUBAREA2 AREA1 2 AREA1 SUBAREA1 SUBAREA2 SUBAREA1 3 AREA1 SUBAREA1 SUBAREA2 SUBAREA2 4 AREA1 SUBAREA1 SUBAREA2 VILL1 5 AREA1 SUBAREA1 SUBAREA2 VILL2 6 AREA1 SUBAREA1 SUBAREA2 VILL3 7 AREA1 SUBAREA1 SUBAREA2 VILL4 8 AREA2 SUBAREA1 SUBAREA2 AREA2 9 AREA2 SUBAREA1 SUBAREA2 SUBAREA1 10 AREA2 SUBAREA1 SUBAREA2 VILL5 11 AREA2 SUBAREA1 SUBAREA2 VILL6 12 AREA2 SUBAREA1 SUBAREA2 VILL7 13 AREA2 SUBAREA1 SUBAREA2 VILL8 14 AREA3 SUBAREA1 SUBAREA2 AREA3 15 AREA3 SUBAREA1 SUBAREA2 SUBAREA2 16 AREA3 SUBAREA1 SUBAREA2 VILL9 17 AREA3 SUBAREA1 SUBAREA2 VILL10 18 AREA3 SUBAREA1 SUBAREA2 VILL11 19 AREA3 SUBAREA1 SUBAREA2 VILL12 20 AREA4 SUBAREA1 SUBAREA2 SUBAREA1 21 AREA4 SUBAREA1 SUBAREA2 SUBAREA2 22 AREA4 SUBAREA1 SUBAREA2 VILL13 23 AREA4 SUBAREA1 SUBAREA2 VILL14 24 AREA4 SUBAREA1 SUBAREA2 VILL15 25 AREA4 SUBAREA1 SUBAREA2 VILL16 25 rows selected.
Why?ID AREA SUBAREA1 SUBAREA2 LOCATION ---------- -------------------- -------------------- -------------------- -------------------- 26 AREA2 SUBAREA1 SUBAREA2 SUBAREA2 27 AREA3 SUBAREA1 SUBAREA2 SUBAREA1 28 AREA4 SUBAREA1 SUBAREA2 AREA4
Because as I said above that rowset for the euro1 area is perfect because in the location column there are lines for the euro1, SUBAREA1 and SUBAREA2 area. is exists, whereas if we see that there are no lines for AREA2 with the value SUBAREA2 in the place, even regarding the Domain3, there is no line that has the value of the SUBAREA1 location and even for AREA4, there is no line as location = AREA4. It is a table which is having all the names of place with nested values; for example, we can see that vill7 is exist in zone2 including SUBAREA1 (COLUMN NAME) = "SUBAREA1" AND SUBAREA2 (COLUMN NAME) = "SUBAREA2", but I would like to know location = SUBAREA2 then it will say no line, I want to generate all the lines that is to have no value in the column location for said AREA/SUBAREA1/SUBAREA2 column. Table is sorted by ID. Total column lines are 45800.
OkSQL> select * from vill where area='AREA1' and location='SUBAREA1'; ID AREA SUBAREA1 SUBAREA2 LOCATION ---------- -------------------- -------------------- -------------------- -------------------- 2 AREA1 SUBAREA1 SUBAREA2 SUBAREA1
It is also ok, but if saidSQL> select * from vill where area='AREA2' and location='SUBAREA1'; ID AREA SUBAREA1 SUBAREA2 LOCATION ---------- -------------------- -------------------- -------------------- -------------------- 9 AREA2 SUBAREA1 SUBAREA2 SUBAREA1
< <-Yes, this line I want to generate, because there should be a line whose location = "SBUAREA2" but why? Because otherwise how do I know what is the hierarchy of the SUBAREA2; While vill 5,6,7 and 8 were SUBAREA2 as "SUBAREA2".SQL> select * from vill where area='AREA2' and location='SUBAREA2'; no rows selected
I'm not sure how I am clear in my question, please let me know if I need to provide more details.
Thank you.user12050217 wrote:
... query should return:ID AREA SUBAREA1 SUBAREA2 LOCATION ---------- -------------------- -------------------- -------------------- -------------------- 131 my state my city my city street 2
Sorry, I don't understand that one line. Was it a mistake? I think I understand all the other lines that you want to, but I do not understand why you want the one above. Did you mean
ID AREA SUBAREA1 SUBAREA2 LOCATION ---------- -------------------- -------------------- -------------------- -------------------- 131 my state my city street 2 street 2
?
If this is not the case, why you don't want the row immediately above? Why don't you also:
` ID AREA SUBAREA1 SUBAREA2 LOCATION ---------- -------------------- -------------------- -------------------- -------------------- 131 my state new city new city street 2
?
Assuming it was just a mistake, the following Gets the results you want
WITH rows_needed AS ( SELECT area , area AS subarea1 , area AS subarea2 , area AS location FROM vill WHERE area != subarea1 OR area != subarea2 OR area != location UNION SELECT area , subarea1 , subarea1 AS subarea2 , subarea1 AS location FROM vill WHERE subarea1 != subarea2 OR subarea1 != location UNION SELECT area , subarea1 , subarea2 , subarea2 AS location FROM vill ) SELECT ( SELECT MAX (id) FROM vill ) + ROWNUM AS id , area, subarea1, subarea2, location FROM rows_needed WHERE (area, subarea1, subarea2, location) NOT IN ( SELECT area, subarea1, subarea2, location FROM vill ) ;
except that it is for an indefinite period including the ID will assign to what line. I guess that doesn't matter, as long as 130 to 137 numbers are used (or 131 to 138, if that is what you really want).
When I run your code on the table he returned me the desired output, but when I run it on my actual table that is having 45800 lines, then he messed up some results, because I think that in your code, I should mention the clause ORDER BY ID somewhere... Therefore, in this example I mention different IDS while inserting the lines. Your code worked very well because it is having only 25 rows with ID Ordered, while my actual table is to have 45800 lines in the table, there is no guarantee of ID ordered... so I think that its a problem with the order by clause, ID... but I don't know where I should put this clause
What is the significance of id? Is this just a unique key? That's, I guess that each line must have an id and two rows can have the same id, but, aside from that, it doesn't matter what line has which id.
The query I posted yesterday assumes that subarea1 and subarea2 were functionally dependent on the area. as in the example of data you posted yesterday. I see your last post that's not true, and which explains erroneous results.As I said yesterday, if you are actually setting up new lines in the table, you must use a sequence to generate identifiers.
-
missing namespace for the parameters in the web service call
We try to call a web service developed by Java & XFire. The WSDL is valid for WS - I Basic Profile and it works very well with SoapUI. The query generated automatically by SoapUI is the following:
"" "" "< soapenv:Envelope xmlns:soapenv = ' http://schemas.xmlsoap.org/soap/envelope/ ' xmlns: your =" http://www.example.org/test8/ " xmlns:tes1 =" http://www.example.org/test8 "> "
< soapenv:Header / >
< soapenv:Body >
< your: parameters >
< a >
< tes1:id > 44444444444445 < / tes1:id >
< tes1:b >
< tes1:id >? < / tes1:id >
< / tes1:b >
< /a >
< id >? < /ID >
< / your: parameters >
< / soapenv:Body >
< / soapenv:Envelope >
When we put this in Flex, what we are seeing is that the namespace for the parameters element is missing. We see it in the proxy logs. The server receives this message and parameters is not in namespace, so the server complains that the parameters is missing. We can reproduce this exact behavior by removing namespace in the query with SoapUI.
The question is why flex removes namespace for the element parameters?
We use the literal to the WSDL document, and I paste below. We have been stuck on this for over a week, so if anyone has any suggestions I would be eternally grateful. Thank you
<? XML version = "1.0" encoding = "UTF-8"? >
< wsdl:definitions
' xmlns:SOAP =' http://schemas.xmlsoap.org/wsdl/soap/ "
' xmlns:TNS =' http://www.example.org/test8/ '
' xmlns:WSDL =' http://schemas.xmlsoap.org/wsdl/ '
"container =" http://www.w3.org/2001/XMLSchema "
name = "test8".
targetNamespace =" http://www.example.org/test8/" > "
WSDL: < types >
< xsd: Schema
"targetNamespace =" http://www.example.org/test8/ "
xmlns:Q1 =" http://www.example.org/test8" > "
< xsd: import
schemaLocation = "Test8.xsd."
namespace =" http://www.example.org/test8" > "
< / xsd: import >
< xsd: complexType name = "fooRequestType" >
< xsd: SEQUENCE >
< xsd: ELEMENT
name = "a".
Type = "Q1:A" >
< / xsd: element >
< xsd: ELEMENT
name = "id".
Type = "xsd: String" >
< / xsd: element >
< / xsd: SEQUENCE >
< / xsd: complexType >
< xsd: complexType name = "fooResponseType" >
< xsd: SEQUENCE >
< xsd: ELEMENT
name = "b".
Type = "Q1:B" >
< / xsd: element >
< xsd: ELEMENT
name = "id".
Type = "xsd: String" >
< / xsd: element >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: Schema >
< / wsdl: types >
< name of the WSDL: message = "fooRequest" >
< wsdl: part
name = "parameters".
Type = "tns:fooRequestType" / >
< / wsdl: message >
< name of the WSDL: message = "fooResponse" >
< wsdl: part
name = "parameters".
Type = "tns:fooResponseType" / >
< / wsdl: message >
< name of wsdl: portType = "Test8" >
< name of wsdl: Operation = "foo" >
< message wsdl: Input = "tns:fooRequest" / >
< message wsdl: output = "tns:fooResponse" / >
< / wsdl: Operation >
< / wsdl: portType >
< wsdl: Binding
name = "Test8SOAP".
Type = "tns:Test8" >
< soap binding:
style = "document".
"transport =" http://schemas.xmlsoap.org/soap/http " / >
< name of wsdl: Operation = "foo" >
WSDL: input >
< use of soap: body = "literal" / >
< / wsdl: Input >
< wsdl: output >
< use of soap: body = "literal" / >
< / wsdl: output >
< / wsdl: Operation >
< / wsdl: Binding >
< wsdl:service name = "Test8" >
< wsdl: port
Binding = "tns:Test8SOAP."
name = "Test8SOAP" >
"" < soap: address location = ' http://www.example.org/test8 ' / >
< / wsdl: port >
< / wsdl:service >
< / wsdl:definitions >
the XSD containing A and B:
<? XML version = "1.0" encoding = "UTF-8"? >
"" "" "" < scheme xmlns = " http://www.w3.org/2001/XMLSchema" targetNamespace = ' http://www.example.org/test8 ' xmlns:tns = ' http://www.example.org/test8 ' elementFormDefault = "qualified" >
< name complexType = 'A' >
<>sequence
< element
name = "id".
Type = "string" >
< / item >
< element
name = "b".
Type = "tns:B" >
< / item >
< / sequence >
< / complexType >
< complexType name = "B" >
<>sequence
< element
name = "id".
Type = "string" >
< / item >
< / sequence >
< / complexType >
< / schema >
The solution seems to be that Flex doesn't support unwrapped no literal document. Flex only supports rpc literal or literal wrapped document. This seems to be because flex adds the name of the xml message method and in the unpacked literal document there is no message name in the soap message.
It took a lot of time to understand this, partly because we did not know exactly what is wrapped meant (there is no option in Eclipse WTP for her, no way to verify no wrapped with a tool, etc.). If Flex said that she did not support unpacking literal document we would have saved ourselves a week or two.
-
How can I unsubscribe from a monthly automatic renewal for the Washington Post?
I don't want to get the Washington Post more. It automatically renews each month and I pay on my Apple account. How can I stop it?
There are instructions on this page to manage and automatic shutdown iTunes-renewal of subscriptions: view, change or cancel your subscription - Apple Support
-
Missing drivers for the new installation of XP SP 3 on HP Pavilion 500-202eo
Hello.
So I tried to make XP SP 3 to work on my new desktop HP Pavilion 500-202eo. I have partioned the disk in two and was able to install and modify Windows 7 on the other partition, largely with the support of the HP drivers for my model successfully. However I have not found any support for XP drivers for this model, or any other similar models in the 500 series with APU AMD A6 material - 6400 k Radeon HD graphics card. Installing XP went well, but I'm not having any sound, internet or USB 3 support options. In Device Manager, the following components are marked in yellow with the error code 28:
Audio device on High Definition Bus Audio
Ethernet controller
Network controller
SM Bus controller
USB controller Universal Serial Bus
Video controller VGA compatible
I tried to install the drivers Realtek for XP at least addressing the absence of sound, but it doesn't seem to make a difference, and when I point the Add Wizard of material on file with the drivers Realtek he says that it cannot find the correct drivers. You have any suggestions where I can find the software needed?
Hello:
I doubt that you will be able to do all this work, but that's...
Your PC has the IDT audio controller so the Realtek audio drivers do not work.
First install the AMD chipset driver and restart. You want the first file in the list.
Graphics: See if this driver works...
Ethernet: DL and install the driver Windows of the 3rd group of ethernet cards (pilots AR816X QCA817X family). It would be the last driver in the section.
http://www.QCA.Qualcomm.com/resources/driverdownloads/
Try this driver for the wireless card:
Audio: See if it works...
Scroll down to the bottom of page to:
IDT_HD_Audio_6469_xp_win7_win8.ziphttp://www.driversguru.com/HardwareID-HDAudio---FUNC_01-_-VEN_111D-_-DEV_76D9-_-SUBSYS_103C3387
All audio drivers it try also.
If the chipset driver above does not install the smbus controller, I enclose the smbus controller below in attachments driver files. Download and unzip the file.
Go to Device Manager and click on the smbus controller device. Click the driver tab. Click on set to update driver, and then select manual search method. Select disk, and then locate the file you unzipped\SMBUSamd
-
missing files for the language selection
I took delivery of a new Scandisk clip + 4 GB, he released and pulled upward and that's all I could do was put it in a foreign language,
looked like Chinese, absolutely nothing can be done to change this.
Back in the area he went straight back to Amazon.
Why they sell these China to any country without ensuring that a language file is available for the buyer to choose their own language.
If the file had been available, access would have been by opening the folder on a computer.
You don't have to be a genius to know that in the world of trade you aint going to sell a lot without a language folder.
came out of the language and options and found they would have helped.
but you would always do it 'blind', there must be a way simpler than that?
-
Is "No single slip for iphone" a missed opportunity for the designers and Adobe?
We have a customer who is interested in a single folio application and others in our agency who would like to sell customers on their free edition to both the ipad and the iphone hardware, but the cost of downloads is too big an obstacle. I contacted adobe for custom pricing (contact a representative if you have any questions about prices) and the cost is always monumental for publication to this free application platform. If an application of DPS where to become popular, it could easily cost as much as a native application.
Does anyone else think that it takes a level of extra price for things like free catalogs where we are not able to charge for the app? I love the toolset and I'd love to be in the middle of this new momentum for the Tablet, but my current project is directed to the interactive group.
It would be unmanageable. Say that you put it in the app store for free.
What is to stop you from changing the price?
Adobe is supposed to check every day on these applications?
Unique Edition for iPhone and Android is very requested. I doubt
you will never see it for Android but iPhone? Who knows.
Bob
-
Evolution of key OEM product for the retail and upgrade to 64 - bit
My tech man upgraded my Vista Ultimate from Windows 7 pro (32 bit) using an OEM product. Unfortunately, I discovered that he used the product key did not go off. Can I buy a retail upgrade version now and do an upgrade to version Pro 64 bit and use this product to the retail key instead? The process of re - install, please...
http://www.Microsoft.com/Windows/Windows-7/get/Upgrade-Advisor.aspx
Windows 7 Upgrade Advisor.
http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx
Railways upgrade to Windows 7 at the link above.
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
Windows 7 Hardware/Software Compatibility Center.
For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to the it.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
Windows 8 media for the second computer upgrade
Hello
I purchased 2 licenses to upgrade for Windows 8, and during the initial purchase is a media (DVD burned a DVD) and used the same for a clean install. Now, I want to know if I can use the same media to upgrade my second computer or should I download the installation media once more.
Kind regards
REDA
If the upgrade version is the same and you have two keys, you can use the same media
-
Missing fonts for the active user interface
I downloaded a user interface of the market of assets of the CC.
When I open it in Photoshop, it was a notice of missing fonts.
The police is Ubuntu. TypeKit has this font, but I can't download it as a font of regular funds because it is Web only.
How can I work with the examples in the user interface if Ubuntu is missing?
Hi Sandee,
If you need a font that is not available for synchronization of Typekit (or does not part of the library of Typekit at all), you can usually buy a license of the Foundry or one of their resellers.
The Ubuntu family is available as a free download on their site:
I hope this helps; Let me know if you have any other questions. Best,
-liz
Maybe you are looking for
-
While using my MacBook crashed at any time. My Hardwarem followed by the report of panic Any ideas? Modellname: MacBook Pro Modell-Identifizierung: MacBookPro10, 1 Prozessortyp: Intel Core i7 Prozessorgeschwindigkeit: 2.3 GHz Number of processors: 1
-
No driver Windows 10 for Acer Aspire M5-481PT
Dear Sir. My laptop (Acer Aspire M5-481PT) model is not listed in the list of update Windows 10. In addition, driver required for this model is not available on the official website of Acer. When will I receive the required drivers?
-
Firefox crashes consistently when they surf on Facebook or other sites.
running firefox on win xp but problems still happen., gel, especially on facebook... what my internet service? What is comp. '? How will I know?original title: run firefox on win xp but problems still happen., gel, especially on facebook... would it
-
my computer is stuck in safe mode
my computer is stuck in safe mode. need help please, I do not understand how to get out.
-
The desktop icons all moving them to the left side of the desktop.
The desktop icons all moving them to the left side of the screen to the start or restart. I use Windows Vista.